forked from Minki/linux
19aed2d6cd
snd_soc_card_jack_new() allowed to create jack kcontrol without pins, but did not create kcontrols. The jack would not have kcontrols if pins were not going to be added. This renames the old snd_soc_card_jack_new() to snd_soc_card_jack_new_pins() for use when pins are provided or will be added later. The new snd_soc_card_jack_new() appropriately creates a jack for use without pins and adds a kcontrol. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
344 lines
9.6 KiB
C
344 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* omap-twl4030.c -- SoC audio for TI SoC based boards with twl4030 codec
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
|
|
* All rights reserved.
|
|
*
|
|
* Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
|
|
*
|
|
* This driver replaces the following machine drivers:
|
|
* omap3beagle (Author: Steve Sakoman <steve@sakoman.com>)
|
|
* omap3evm (Author: Anuj Aggarwal <anuj.aggarwal@ti.com>)
|
|
* overo (Author: Steve Sakoman <steve@sakoman.com>)
|
|
* igep0020 (Author: Enric Balletbo i Serra <eballetbo@iseebcn.com>)
|
|
* zoom2 (Author: Misael Lopez Cruz <misael.lopez@ti.com>)
|
|
* sdp3430 (Author: Misael Lopez Cruz <misael.lopez@ti.com>)
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/omap-twl4030.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/jack.h>
|
|
|
|
#include "omap-mcbsp.h"
|
|
|
|
struct omap_twl4030 {
|
|
int jack_detect; /* board can detect jack events */
|
|
struct snd_soc_jack hs_jack;
|
|
};
|
|
|
|
static int omap_twl4030_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
unsigned int fmt;
|
|
|
|
switch (params_channels(params)) {
|
|
case 2: /* Stereo I2S mode */
|
|
fmt = SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CBM_CFM;
|
|
break;
|
|
case 4: /* Four channel TDM mode */
|
|
fmt = SND_SOC_DAIFMT_DSP_A |
|
|
SND_SOC_DAIFMT_IB_NF |
|
|
SND_SOC_DAIFMT_CBM_CFM;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return snd_soc_runtime_set_dai_fmt(rtd, fmt);
|
|
}
|
|
|
|
static const struct snd_soc_ops omap_twl4030_ops = {
|
|
.hw_params = omap_twl4030_hw_params,
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget dapm_widgets[] = {
|
|
SND_SOC_DAPM_SPK("Earpiece Spk", NULL),
|
|
SND_SOC_DAPM_SPK("Handsfree Spk", NULL),
|
|
SND_SOC_DAPM_HP("Headset Stereophone", NULL),
|
|
SND_SOC_DAPM_SPK("Ext Spk", NULL),
|
|
SND_SOC_DAPM_SPK("Carkit Spk", NULL),
|
|
|
|
SND_SOC_DAPM_MIC("Main Mic", NULL),
|
|
SND_SOC_DAPM_MIC("Sub Mic", NULL),
|
|
SND_SOC_DAPM_MIC("Headset Mic", NULL),
|
|
SND_SOC_DAPM_MIC("Carkit Mic", NULL),
|
|
SND_SOC_DAPM_MIC("Digital0 Mic", NULL),
|
|
SND_SOC_DAPM_MIC("Digital1 Mic", NULL),
|
|
SND_SOC_DAPM_LINE("Line In", NULL),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route audio_map[] = {
|
|
/* Headset Stereophone: HSOL, HSOR */
|
|
{"Headset Stereophone", NULL, "HSOL"},
|
|
{"Headset Stereophone", NULL, "HSOR"},
|
|
/* External Speakers: HFL, HFR */
|
|
{"Handsfree Spk", NULL, "HFL"},
|
|
{"Handsfree Spk", NULL, "HFR"},
|
|
/* External Speakers: PredrivL, PredrivR */
|
|
{"Ext Spk", NULL, "PREDRIVEL"},
|
|
{"Ext Spk", NULL, "PREDRIVER"},
|
|
/* Carkit speakers: CARKITL, CARKITR */
|
|
{"Carkit Spk", NULL, "CARKITL"},
|
|
{"Carkit Spk", NULL, "CARKITR"},
|
|
/* Earpiece */
|
|
{"Earpiece Spk", NULL, "EARPIECE"},
|
|
|
|
/* External Mics: MAINMIC, SUBMIC with bias */
|
|
{"MAINMIC", NULL, "Main Mic"},
|
|
{"Main Mic", NULL, "Mic Bias 1"},
|
|
{"SUBMIC", NULL, "Sub Mic"},
|
|
{"Sub Mic", NULL, "Mic Bias 2"},
|
|
/* Headset Mic: HSMIC with bias */
|
|
{"HSMIC", NULL, "Headset Mic"},
|
|
{"Headset Mic", NULL, "Headset Mic Bias"},
|
|
/* Digital Mics: DIGIMIC0, DIGIMIC1 with bias */
|
|
{"DIGIMIC0", NULL, "Digital0 Mic"},
|
|
{"Digital0 Mic", NULL, "Mic Bias 1"},
|
|
{"DIGIMIC1", NULL, "Digital1 Mic"},
|
|
{"Digital1 Mic", NULL, "Mic Bias 2"},
|
|
/* Carkit In: CARKITMIC */
|
|
{"CARKITMIC", NULL, "Carkit Mic"},
|
|
/* Aux In: AUXL, AUXR */
|
|
{"AUXL", NULL, "Line In"},
|
|
{"AUXR", NULL, "Line In"},
|
|
};
|
|
|
|
/* Headset jack detection DAPM pins */
|
|
static struct snd_soc_jack_pin hs_jack_pins[] = {
|
|
{
|
|
.pin = "Headset Mic",
|
|
.mask = SND_JACK_MICROPHONE,
|
|
},
|
|
{
|
|
.pin = "Headset Stereophone",
|
|
.mask = SND_JACK_HEADPHONE,
|
|
},
|
|
};
|
|
|
|
/* Headset jack detection gpios */
|
|
static struct snd_soc_jack_gpio hs_jack_gpios[] = {
|
|
{
|
|
.name = "hsdet-gpio",
|
|
.report = SND_JACK_HEADSET,
|
|
.debounce_time = 200,
|
|
},
|
|
};
|
|
|
|
static inline void twl4030_disconnect_pin(struct snd_soc_dapm_context *dapm,
|
|
int connected, char *pin)
|
|
{
|
|
if (!connected)
|
|
snd_soc_dapm_disable_pin(dapm, pin);
|
|
}
|
|
|
|
static int omap_twl4030_init(struct snd_soc_pcm_runtime *rtd)
|
|
{
|
|
struct snd_soc_card *card = rtd->card;
|
|
struct snd_soc_dapm_context *dapm = &card->dapm;
|
|
struct omap_tw4030_pdata *pdata = dev_get_platdata(card->dev);
|
|
struct omap_twl4030 *priv = snd_soc_card_get_drvdata(card);
|
|
int ret = 0;
|
|
|
|
/* Headset jack detection only if it is supported */
|
|
if (priv->jack_detect > 0) {
|
|
hs_jack_gpios[0].gpio = priv->jack_detect;
|
|
|
|
ret = snd_soc_card_jack_new_pins(rtd->card, "Headset Jack",
|
|
SND_JACK_HEADSET,
|
|
&priv->hs_jack, hs_jack_pins,
|
|
ARRAY_SIZE(hs_jack_pins));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = snd_soc_jack_add_gpios(&priv->hs_jack,
|
|
ARRAY_SIZE(hs_jack_gpios),
|
|
hs_jack_gpios);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* NULL pdata means we booted with DT. In this case the routing is
|
|
* provided and the card is fully routed, no need to mark pins.
|
|
*/
|
|
if (!pdata || !pdata->custom_routing)
|
|
return ret;
|
|
|
|
/* Disable not connected paths if not used */
|
|
twl4030_disconnect_pin(dapm, pdata->has_ear, "Earpiece Spk");
|
|
twl4030_disconnect_pin(dapm, pdata->has_hf, "Handsfree Spk");
|
|
twl4030_disconnect_pin(dapm, pdata->has_hs, "Headset Stereophone");
|
|
twl4030_disconnect_pin(dapm, pdata->has_predriv, "Ext Spk");
|
|
twl4030_disconnect_pin(dapm, pdata->has_carkit, "Carkit Spk");
|
|
|
|
twl4030_disconnect_pin(dapm, pdata->has_mainmic, "Main Mic");
|
|
twl4030_disconnect_pin(dapm, pdata->has_submic, "Sub Mic");
|
|
twl4030_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic");
|
|
twl4030_disconnect_pin(dapm, pdata->has_carkitmic, "Carkit Mic");
|
|
twl4030_disconnect_pin(dapm, pdata->has_digimic0, "Digital0 Mic");
|
|
twl4030_disconnect_pin(dapm, pdata->has_digimic1, "Digital1 Mic");
|
|
twl4030_disconnect_pin(dapm, pdata->has_linein, "Line In");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Digital audio interface glue - connects codec <--> CPU */
|
|
SND_SOC_DAILINK_DEFS(hifi,
|
|
DAILINK_COMP_ARRAY(COMP_CPU("omap-mcbsp.2")),
|
|
DAILINK_COMP_ARRAY(COMP_CODEC("twl4030-codec", "twl4030-hifi")),
|
|
DAILINK_COMP_ARRAY(COMP_PLATFORM("omap-mcbsp.2")));
|
|
|
|
SND_SOC_DAILINK_DEFS(voice,
|
|
DAILINK_COMP_ARRAY(COMP_CPU("omap-mcbsp.3")),
|
|
DAILINK_COMP_ARRAY(COMP_CODEC("twl4030-codec", "twl4030-voice")),
|
|
DAILINK_COMP_ARRAY(COMP_PLATFORM("omap-mcbsp.3")));
|
|
|
|
static struct snd_soc_dai_link omap_twl4030_dai_links[] = {
|
|
{
|
|
.name = "TWL4030 HiFi",
|
|
.stream_name = "TWL4030 HiFi",
|
|
.init = omap_twl4030_init,
|
|
.ops = &omap_twl4030_ops,
|
|
SND_SOC_DAILINK_REG(hifi),
|
|
},
|
|
{
|
|
.name = "TWL4030 Voice",
|
|
.stream_name = "TWL4030 Voice",
|
|
.dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF |
|
|
SND_SOC_DAIFMT_CBM_CFM,
|
|
SND_SOC_DAILINK_REG(voice),
|
|
},
|
|
};
|
|
|
|
/* Audio machine driver */
|
|
static struct snd_soc_card omap_twl4030_card = {
|
|
.owner = THIS_MODULE,
|
|
.dai_link = omap_twl4030_dai_links,
|
|
.num_links = ARRAY_SIZE(omap_twl4030_dai_links),
|
|
|
|
.dapm_widgets = dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
|
|
.dapm_routes = audio_map,
|
|
.num_dapm_routes = ARRAY_SIZE(audio_map),
|
|
};
|
|
|
|
static int omap_twl4030_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_tw4030_pdata *pdata = dev_get_platdata(&pdev->dev);
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct snd_soc_card *card = &omap_twl4030_card;
|
|
struct omap_twl4030 *priv;
|
|
int ret = 0;
|
|
|
|
card->dev = &pdev->dev;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(struct omap_twl4030), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (node) {
|
|
struct device_node *dai_node;
|
|
struct property *prop;
|
|
|
|
if (snd_soc_of_parse_card_name(card, "ti,model")) {
|
|
dev_err(&pdev->dev, "Card name is not provided\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dai_node = of_parse_phandle(node, "ti,mcbsp", 0);
|
|
if (!dai_node) {
|
|
dev_err(&pdev->dev, "McBSP node is not provided\n");
|
|
return -EINVAL;
|
|
}
|
|
omap_twl4030_dai_links[0].cpus->dai_name = NULL;
|
|
omap_twl4030_dai_links[0].cpus->of_node = dai_node;
|
|
|
|
omap_twl4030_dai_links[0].platforms->name = NULL;
|
|
omap_twl4030_dai_links[0].platforms->of_node = dai_node;
|
|
|
|
dai_node = of_parse_phandle(node, "ti,mcbsp-voice", 0);
|
|
if (!dai_node) {
|
|
card->num_links = 1;
|
|
} else {
|
|
omap_twl4030_dai_links[1].cpus->dai_name = NULL;
|
|
omap_twl4030_dai_links[1].cpus->of_node = dai_node;
|
|
|
|
omap_twl4030_dai_links[1].platforms->name = NULL;
|
|
omap_twl4030_dai_links[1].platforms->of_node = dai_node;
|
|
}
|
|
|
|
priv->jack_detect = of_get_named_gpio(node,
|
|
"ti,jack-det-gpio", 0);
|
|
|
|
/* Optional: audio routing can be provided */
|
|
prop = of_find_property(node, "ti,audio-routing", NULL);
|
|
if (prop) {
|
|
ret = snd_soc_of_parse_audio_routing(card,
|
|
"ti,audio-routing");
|
|
if (ret)
|
|
return ret;
|
|
|
|
card->fully_routed = 1;
|
|
}
|
|
} else if (pdata) {
|
|
if (pdata->card_name) {
|
|
card->name = pdata->card_name;
|
|
} else {
|
|
dev_err(&pdev->dev, "Card name is not provided\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!pdata->voice_connected)
|
|
card->num_links = 1;
|
|
|
|
priv->jack_detect = pdata->jack_detect;
|
|
} else {
|
|
dev_err(&pdev->dev, "Missing pdata\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
snd_soc_card_set_drvdata(card, priv);
|
|
ret = devm_snd_soc_register_card(&pdev->dev, card);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "devm_snd_soc_register_card() failed: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id omap_twl4030_of_match[] = {
|
|
{.compatible = "ti,omap-twl4030", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_twl4030_of_match);
|
|
|
|
static struct platform_driver omap_twl4030_driver = {
|
|
.driver = {
|
|
.name = "omap-twl4030",
|
|
.pm = &snd_soc_pm_ops,
|
|
.of_match_table = omap_twl4030_of_match,
|
|
},
|
|
.probe = omap_twl4030_probe,
|
|
};
|
|
|
|
module_platform_driver(omap_twl4030_driver);
|
|
|
|
MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
|
|
MODULE_DESCRIPTION("ALSA SoC for TI SoC based boards with twl4030 codec");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:omap-twl4030");
|