forked from Minki/linux
7794b1d418
Highlights: - Infrastructure for secure boot on some bare metal Power9 machines. The firmware support is still in development, so the code here won't actually activate secure boot on any existing systems. - A change to xmon (our crash handler / pseudo-debugger) to restrict it to read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop into xmon and modify kernel data, such as the lockdown state. - Support for KASLR on 32-bit BookE machines (Freescale / NXP). - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work with memory ranges >4GB. - Some reworks of the pseries CMM (Cooperative Memory Management) driver to make it behave more like other balloon drivers and enable some cleanups of generic mm code. - A series of fixes to our hardware breakpoint support to properly handle unaligned watchpoint addresses. Plus a bunch of other smaller improvements, fixes and cleanups. Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl3hBycTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgApBEACk91MEQDYJ9MF9I6uN+85qb5p4pMsp rGzqnpt+XFidbDAc3eP63pYfIDSo3jtkQ2YL7shAnDOTvkO0md+Vqkl9Aq/G6FIf lDBlwbgkXMSxS/O2Lpvfn4NZAoK6dKmiV55LSgfliM62X3e2Saeg6TR55wBTgJ6/ SlYPDwZfcVHOAiFS3UmfB+hkiIZk+AI5Zr5VAZvT2ZmeH36yAWkq4JgJI1uAk6m1 /7iCnlfUjx/nl/BhnA3kjjmAgGCJ5s/WuVgwFMz47XpMBWGBhLWpMh/NqDTFb8ca kpiVQoVPQe2xyO3pL/kOwBy6sii26ftfHDhLKMy1hJdEhVQzS5LerPIMeh1qsU8Q hV/Cj+jfsrS/vBDOehj3jwx93t+861PmTOqgLnpYQ6Ltrt+2B/74+fufGMHE1kI3 Ffo7xvNw4sw6bSziDxDFqUx2P1dFN5D5EJsJsYM98ekkVAAkzNqCDRvfD2QI8Pif VXWPYXqtNJTrVPJA0D7Yfo9FDNwhANd0f1zi7r/U5mVXBFUyKOlGqTQSkXgMrVeK 3I7wHPOVGgdA5UUkfcd3pcuqsY081U9E//o5PUfj8ybO5JCwly8NoatbG+xHmKia a72uJT8MjCo9mGCHKDrwi9l/kqms6ZSv8RP+yMhGuB52YoiGc6PpVyab5jXIUd1N yTtBlC0YGW1JYw== =JHzg -----END PGP SIGNATURE----- Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Infrastructure for secure boot on some bare metal Power9 machines. The firmware support is still in development, so the code here won't actually activate secure boot on any existing systems. - A change to xmon (our crash handler / pseudo-debugger) to restrict it to read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop into xmon and modify kernel data, such as the lockdown state. - Support for KASLR on 32-bit BookE machines (Freescale / NXP). - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work with memory ranges >4GB. - Some reworks of the pseries CMM (Cooperative Memory Management) driver to make it behave more like other balloon drivers and enable some cleanups of generic mm code. - A series of fixes to our hardware breakpoint support to properly handle unaligned watchpoint addresses. Plus a bunch of other smaller improvements, fixes and cleanups. Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing" * tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits) powerpc/fixmap: fix crash with HIGHMEM x86/efi: remove unused variables powerpc: Define arch_is_kernel_initmem_freed() for lockdep powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp powerpc: Avoid clang warnings around setjmp and longjmp powerpc: Don't add -mabi= flags when building with Clang powerpc: Fix Kconfig indentation powerpc/fixmap: don't clear fixmap area in paging_init() selftests/powerpc: spectre_v2 test must be built 64-bit powerpc/powernv: Disable native PCIe port management powerpc/kexec: Move kexec files into a dedicated subdir. powerpc/32: Split kexec low level code out of misc_32.S powerpc/sysdev: drop simple gpio powerpc/83xx: map IMMR with a BAT. powerpc/32s: automatically allocate BAT in setbat() powerpc/ioremap: warn on early use of ioremap() powerpc: Add support for GENERIC_EARLY_IOREMAP powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt() powerpc/8xx: use the fixmapped IMMR in cpm_reset() powerpc/8xx: add __init to cpm1 init functions ...
511 lines
13 KiB
C
511 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Security related flags and so on.
|
|
//
|
|
// Copyright 2018, Michael Ellerman, IBM Corporation.
|
|
|
|
#include <linux/cpu.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/seq_buf.h>
|
|
|
|
#include <asm/asm-prototypes.h>
|
|
#include <asm/code-patching.h>
|
|
#include <asm/debugfs.h>
|
|
#include <asm/security_features.h>
|
|
#include <asm/setup.h>
|
|
|
|
|
|
u64 powerpc_security_features __read_mostly = SEC_FTR_DEFAULT;
|
|
|
|
enum count_cache_flush_type {
|
|
COUNT_CACHE_FLUSH_NONE = 0x1,
|
|
COUNT_CACHE_FLUSH_SW = 0x2,
|
|
COUNT_CACHE_FLUSH_HW = 0x4,
|
|
};
|
|
static enum count_cache_flush_type count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
|
|
static bool link_stack_flush_enabled;
|
|
|
|
bool barrier_nospec_enabled;
|
|
static bool no_nospec;
|
|
static bool btb_flush_enabled;
|
|
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_BOOK3S_64)
|
|
static bool no_spectrev2;
|
|
#endif
|
|
|
|
static void enable_barrier_nospec(bool enable)
|
|
{
|
|
barrier_nospec_enabled = enable;
|
|
do_barrier_nospec_fixups(enable);
|
|
}
|
|
|
|
void setup_barrier_nospec(void)
|
|
{
|
|
bool enable;
|
|
|
|
/*
|
|
* It would make sense to check SEC_FTR_SPEC_BAR_ORI31 below as well.
|
|
* But there's a good reason not to. The two flags we check below are
|
|
* both are enabled by default in the kernel, so if the hcall is not
|
|
* functional they will be enabled.
|
|
* On a system where the host firmware has been updated (so the ori
|
|
* functions as a barrier), but on which the hypervisor (KVM/Qemu) has
|
|
* not been updated, we would like to enable the barrier. Dropping the
|
|
* check for SEC_FTR_SPEC_BAR_ORI31 achieves that. The only downside is
|
|
* we potentially enable the barrier on systems where the host firmware
|
|
* is not updated, but that's harmless as it's a no-op.
|
|
*/
|
|
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
|
|
security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR);
|
|
|
|
if (!no_nospec && !cpu_mitigations_off())
|
|
enable_barrier_nospec(enable);
|
|
}
|
|
|
|
static int __init handle_nospectre_v1(char *p)
|
|
{
|
|
no_nospec = true;
|
|
|
|
return 0;
|
|
}
|
|
early_param("nospectre_v1", handle_nospectre_v1);
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int barrier_nospec_set(void *data, u64 val)
|
|
{
|
|
switch (val) {
|
|
case 0:
|
|
case 1:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!!val == !!barrier_nospec_enabled)
|
|
return 0;
|
|
|
|
enable_barrier_nospec(!!val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int barrier_nospec_get(void *data, u64 *val)
|
|
{
|
|
*val = barrier_nospec_enabled ? 1 : 0;
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_DEBUGFS_ATTRIBUTE(fops_barrier_nospec, barrier_nospec_get,
|
|
barrier_nospec_set, "%llu\n");
|
|
|
|
static __init int barrier_nospec_debugfs_init(void)
|
|
{
|
|
debugfs_create_file_unsafe("barrier_nospec", 0600,
|
|
powerpc_debugfs_root, NULL,
|
|
&fops_barrier_nospec);
|
|
return 0;
|
|
}
|
|
device_initcall(barrier_nospec_debugfs_init);
|
|
|
|
static __init int security_feature_debugfs_init(void)
|
|
{
|
|
debugfs_create_x64("security_features", 0400, powerpc_debugfs_root,
|
|
&powerpc_security_features);
|
|
return 0;
|
|
}
|
|
device_initcall(security_feature_debugfs_init);
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_BOOK3S_64)
|
|
static int __init handle_nospectre_v2(char *p)
|
|
{
|
|
no_spectrev2 = true;
|
|
|
|
return 0;
|
|
}
|
|
early_param("nospectre_v2", handle_nospectre_v2);
|
|
#endif /* CONFIG_PPC_FSL_BOOK3E || CONFIG_PPC_BOOK3S_64 */
|
|
|
|
#ifdef CONFIG_PPC_FSL_BOOK3E
|
|
void setup_spectre_v2(void)
|
|
{
|
|
if (no_spectrev2 || cpu_mitigations_off())
|
|
do_btb_flush_fixups();
|
|
else
|
|
btb_flush_enabled = true;
|
|
}
|
|
#endif /* CONFIG_PPC_FSL_BOOK3E */
|
|
|
|
#ifdef CONFIG_PPC_BOOK3S_64
|
|
ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
bool thread_priv;
|
|
|
|
thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
|
|
|
|
if (rfi_flush) {
|
|
struct seq_buf s;
|
|
seq_buf_init(&s, buf, PAGE_SIZE - 1);
|
|
|
|
seq_buf_printf(&s, "Mitigation: RFI Flush");
|
|
if (thread_priv)
|
|
seq_buf_printf(&s, ", L1D private per thread");
|
|
|
|
seq_buf_printf(&s, "\n");
|
|
|
|
return s.len;
|
|
}
|
|
|
|
if (thread_priv)
|
|
return sprintf(buf, "Vulnerable: L1D private per thread\n");
|
|
|
|
if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
|
|
!security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
|
|
return sprintf(buf, "Not affected\n");
|
|
|
|
return sprintf(buf, "Vulnerable\n");
|
|
}
|
|
|
|
ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
return cpu_show_meltdown(dev, attr, buf);
|
|
}
|
|
#endif
|
|
|
|
ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct seq_buf s;
|
|
|
|
seq_buf_init(&s, buf, PAGE_SIZE - 1);
|
|
|
|
if (security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) {
|
|
if (barrier_nospec_enabled)
|
|
seq_buf_printf(&s, "Mitigation: __user pointer sanitization");
|
|
else
|
|
seq_buf_printf(&s, "Vulnerable");
|
|
|
|
if (security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31))
|
|
seq_buf_printf(&s, ", ori31 speculation barrier enabled");
|
|
|
|
seq_buf_printf(&s, "\n");
|
|
} else
|
|
seq_buf_printf(&s, "Not affected\n");
|
|
|
|
return s.len;
|
|
}
|
|
|
|
ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct seq_buf s;
|
|
bool bcs, ccd;
|
|
|
|
seq_buf_init(&s, buf, PAGE_SIZE - 1);
|
|
|
|
bcs = security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED);
|
|
ccd = security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED);
|
|
|
|
if (bcs || ccd) {
|
|
seq_buf_printf(&s, "Mitigation: ");
|
|
|
|
if (bcs)
|
|
seq_buf_printf(&s, "Indirect branch serialisation (kernel only)");
|
|
|
|
if (bcs && ccd)
|
|
seq_buf_printf(&s, ", ");
|
|
|
|
if (ccd)
|
|
seq_buf_printf(&s, "Indirect branch cache disabled");
|
|
|
|
if (link_stack_flush_enabled)
|
|
seq_buf_printf(&s, ", Software link stack flush");
|
|
|
|
} else if (count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) {
|
|
seq_buf_printf(&s, "Mitigation: Software count cache flush");
|
|
|
|
if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW)
|
|
seq_buf_printf(&s, " (hardware accelerated)");
|
|
|
|
if (link_stack_flush_enabled)
|
|
seq_buf_printf(&s, ", Software link stack flush");
|
|
|
|
} else if (btb_flush_enabled) {
|
|
seq_buf_printf(&s, "Mitigation: Branch predictor state flush");
|
|
} else {
|
|
seq_buf_printf(&s, "Vulnerable");
|
|
}
|
|
|
|
seq_buf_printf(&s, "\n");
|
|
|
|
return s.len;
|
|
}
|
|
|
|
#ifdef CONFIG_PPC_BOOK3S_64
|
|
/*
|
|
* Store-forwarding barrier support.
|
|
*/
|
|
|
|
static enum stf_barrier_type stf_enabled_flush_types;
|
|
static bool no_stf_barrier;
|
|
bool stf_barrier;
|
|
|
|
static int __init handle_no_stf_barrier(char *p)
|
|
{
|
|
pr_info("stf-barrier: disabled on command line.");
|
|
no_stf_barrier = true;
|
|
return 0;
|
|
}
|
|
|
|
early_param("no_stf_barrier", handle_no_stf_barrier);
|
|
|
|
/* This is the generic flag used by other architectures */
|
|
static int __init handle_ssbd(char *p)
|
|
{
|
|
if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) {
|
|
/* Until firmware tells us, we have the barrier with auto */
|
|
return 0;
|
|
} else if (strncmp(p, "off", 3) == 0) {
|
|
handle_no_stf_barrier(NULL);
|
|
return 0;
|
|
} else
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
early_param("spec_store_bypass_disable", handle_ssbd);
|
|
|
|
/* This is the generic flag used by other architectures */
|
|
static int __init handle_no_ssbd(char *p)
|
|
{
|
|
handle_no_stf_barrier(NULL);
|
|
return 0;
|
|
}
|
|
early_param("nospec_store_bypass_disable", handle_no_ssbd);
|
|
|
|
static void stf_barrier_enable(bool enable)
|
|
{
|
|
if (enable)
|
|
do_stf_barrier_fixups(stf_enabled_flush_types);
|
|
else
|
|
do_stf_barrier_fixups(STF_BARRIER_NONE);
|
|
|
|
stf_barrier = enable;
|
|
}
|
|
|
|
void setup_stf_barrier(void)
|
|
{
|
|
enum stf_barrier_type type;
|
|
bool enable, hv;
|
|
|
|
hv = cpu_has_feature(CPU_FTR_HVMODE);
|
|
|
|
/* Default to fallback in case fw-features are not available */
|
|
if (cpu_has_feature(CPU_FTR_ARCH_300))
|
|
type = STF_BARRIER_EIEIO;
|
|
else if (cpu_has_feature(CPU_FTR_ARCH_207S))
|
|
type = STF_BARRIER_SYNC_ORI;
|
|
else if (cpu_has_feature(CPU_FTR_ARCH_206))
|
|
type = STF_BARRIER_FALLBACK;
|
|
else
|
|
type = STF_BARRIER_NONE;
|
|
|
|
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
|
|
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) ||
|
|
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && hv));
|
|
|
|
if (type == STF_BARRIER_FALLBACK) {
|
|
pr_info("stf-barrier: fallback barrier available\n");
|
|
} else if (type == STF_BARRIER_SYNC_ORI) {
|
|
pr_info("stf-barrier: hwsync barrier available\n");
|
|
} else if (type == STF_BARRIER_EIEIO) {
|
|
pr_info("stf-barrier: eieio barrier available\n");
|
|
}
|
|
|
|
stf_enabled_flush_types = type;
|
|
|
|
if (!no_stf_barrier && !cpu_mitigations_off())
|
|
stf_barrier_enable(enable);
|
|
}
|
|
|
|
ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) {
|
|
const char *type;
|
|
switch (stf_enabled_flush_types) {
|
|
case STF_BARRIER_EIEIO:
|
|
type = "eieio";
|
|
break;
|
|
case STF_BARRIER_SYNC_ORI:
|
|
type = "hwsync";
|
|
break;
|
|
case STF_BARRIER_FALLBACK:
|
|
type = "fallback";
|
|
break;
|
|
default:
|
|
type = "unknown";
|
|
}
|
|
return sprintf(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type);
|
|
}
|
|
|
|
if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
|
|
!security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
|
|
return sprintf(buf, "Not affected\n");
|
|
|
|
return sprintf(buf, "Vulnerable\n");
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int stf_barrier_set(void *data, u64 val)
|
|
{
|
|
bool enable;
|
|
|
|
if (val == 1)
|
|
enable = true;
|
|
else if (val == 0)
|
|
enable = false;
|
|
else
|
|
return -EINVAL;
|
|
|
|
/* Only do anything if we're changing state */
|
|
if (enable != stf_barrier)
|
|
stf_barrier_enable(enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stf_barrier_get(void *data, u64 *val)
|
|
{
|
|
*val = stf_barrier ? 1 : 0;
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_DEBUGFS_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set,
|
|
"%llu\n");
|
|
|
|
static __init int stf_barrier_debugfs_init(void)
|
|
{
|
|
debugfs_create_file_unsafe("stf_barrier", 0600, powerpc_debugfs_root,
|
|
NULL, &fops_stf_barrier);
|
|
return 0;
|
|
}
|
|
device_initcall(stf_barrier_debugfs_init);
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
static void no_count_cache_flush(void)
|
|
{
|
|
count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
|
|
pr_info("count-cache-flush: software flush disabled.\n");
|
|
}
|
|
|
|
static void toggle_count_cache_flush(bool enable)
|
|
{
|
|
if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE) &&
|
|
!security_ftr_enabled(SEC_FTR_FLUSH_LINK_STACK))
|
|
enable = false;
|
|
|
|
if (!enable) {
|
|
patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP);
|
|
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
|
|
patch_instruction_site(&patch__call_kvm_flush_link_stack, PPC_INST_NOP);
|
|
#endif
|
|
pr_info("link-stack-flush: software flush disabled.\n");
|
|
link_stack_flush_enabled = false;
|
|
no_count_cache_flush();
|
|
return;
|
|
}
|
|
|
|
// This enables the branch from _switch to flush_count_cache
|
|
patch_branch_site(&patch__call_flush_count_cache,
|
|
(u64)&flush_count_cache, BRANCH_SET_LINK);
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
|
|
// This enables the branch from guest_exit_cont to kvm_flush_link_stack
|
|
patch_branch_site(&patch__call_kvm_flush_link_stack,
|
|
(u64)&kvm_flush_link_stack, BRANCH_SET_LINK);
|
|
#endif
|
|
|
|
pr_info("link-stack-flush: software flush enabled.\n");
|
|
link_stack_flush_enabled = true;
|
|
|
|
// If we just need to flush the link stack, patch an early return
|
|
if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
|
|
patch_instruction_site(&patch__flush_link_stack_return, PPC_INST_BLR);
|
|
no_count_cache_flush();
|
|
return;
|
|
}
|
|
|
|
if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) {
|
|
count_cache_flush_type = COUNT_CACHE_FLUSH_SW;
|
|
pr_info("count-cache-flush: full software flush sequence enabled.\n");
|
|
return;
|
|
}
|
|
|
|
patch_instruction_site(&patch__flush_count_cache_return, PPC_INST_BLR);
|
|
count_cache_flush_type = COUNT_CACHE_FLUSH_HW;
|
|
pr_info("count-cache-flush: hardware assisted flush sequence enabled\n");
|
|
}
|
|
|
|
void setup_count_cache_flush(void)
|
|
{
|
|
bool enable = true;
|
|
|
|
if (no_spectrev2 || cpu_mitigations_off()) {
|
|
if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) ||
|
|
security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED))
|
|
pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n");
|
|
|
|
enable = false;
|
|
}
|
|
|
|
/*
|
|
* There's no firmware feature flag/hypervisor bit to tell us we need to
|
|
* flush the link stack on context switch. So we set it here if we see
|
|
* either of the Spectre v2 mitigations that aim to protect userspace.
|
|
*/
|
|
if (security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED) ||
|
|
security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE))
|
|
security_ftr_set(SEC_FTR_FLUSH_LINK_STACK);
|
|
|
|
toggle_count_cache_flush(enable);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int count_cache_flush_set(void *data, u64 val)
|
|
{
|
|
bool enable;
|
|
|
|
if (val == 1)
|
|
enable = true;
|
|
else if (val == 0)
|
|
enable = false;
|
|
else
|
|
return -EINVAL;
|
|
|
|
toggle_count_cache_flush(enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int count_cache_flush_get(void *data, u64 *val)
|
|
{
|
|
if (count_cache_flush_type == COUNT_CACHE_FLUSH_NONE)
|
|
*val = 0;
|
|
else
|
|
*val = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_DEBUGFS_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get,
|
|
count_cache_flush_set, "%llu\n");
|
|
|
|
static __init int count_cache_flush_debugfs_init(void)
|
|
{
|
|
debugfs_create_file_unsafe("count_cache_flush", 0600,
|
|
powerpc_debugfs_root, NULL,
|
|
&fops_count_cache_flush);
|
|
return 0;
|
|
}
|
|
device_initcall(count_cache_flush_debugfs_init);
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
#endif /* CONFIG_PPC_BOOK3S_64 */
|