linux/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c
Sam Ravnborg 8bc0b56098 drm/panel: sharp-lq101r1sx01: use drm_panel backlight support
Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-21-sam@ravnborg.org
2019-12-09 22:57:27 +01:00

442 lines
9.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 NVIDIA Corporation
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
struct sharp_panel {
struct drm_panel base;
/* the datasheet refers to them as DSI-LINK1 and DSI-LINK2 */
struct mipi_dsi_device *link1;
struct mipi_dsi_device *link2;
struct regulator *supply;
bool prepared;
bool enabled;
const struct drm_display_mode *mode;
};
static inline struct sharp_panel *to_sharp_panel(struct drm_panel *panel)
{
return container_of(panel, struct sharp_panel, base);
}
static void sharp_wait_frames(struct sharp_panel *sharp, unsigned int frames)
{
unsigned int refresh = drm_mode_vrefresh(sharp->mode);
if (WARN_ON(frames > refresh))
return;
msleep(1000 / (refresh / frames));
}
static int sharp_panel_write(struct sharp_panel *sharp, u16 offset, u8 value)
{
u8 payload[3] = { offset >> 8, offset & 0xff, value };
struct mipi_dsi_device *dsi = sharp->link1;
ssize_t err;
err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
if (err < 0) {
dev_err(&dsi->dev, "failed to write %02x to %04x: %zd\n",
value, offset, err);
return err;
}
err = mipi_dsi_dcs_nop(dsi);
if (err < 0) {
dev_err(&dsi->dev, "failed to send DCS nop: %zd\n", err);
return err;
}
usleep_range(10, 20);
return 0;
}
static __maybe_unused int sharp_panel_read(struct sharp_panel *sharp,
u16 offset, u8 *value)
{
ssize_t err;
cpu_to_be16s(&offset);
err = mipi_dsi_generic_read(sharp->link1, &offset, sizeof(offset),
value, sizeof(*value));
if (err < 0)
dev_err(&sharp->link1->dev, "failed to read from %04x: %zd\n",
offset, err);
return err;
}
static int sharp_panel_disable(struct drm_panel *panel)
{
struct sharp_panel *sharp = to_sharp_panel(panel);
if (!sharp->enabled)
return 0;
sharp->enabled = false;
return 0;
}
static int sharp_panel_unprepare(struct drm_panel *panel)
{
struct sharp_panel *sharp = to_sharp_panel(panel);
int err;
if (!sharp->prepared)
return 0;
sharp_wait_frames(sharp, 4);
err = mipi_dsi_dcs_set_display_off(sharp->link1);
if (err < 0)
dev_err(panel->dev, "failed to set display off: %d\n", err);
err = mipi_dsi_dcs_enter_sleep_mode(sharp->link1);
if (err < 0)
dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
msleep(120);
regulator_disable(sharp->supply);
sharp->prepared = false;
return 0;
}
static int sharp_setup_symmetrical_split(struct mipi_dsi_device *left,
struct mipi_dsi_device *right,
const struct drm_display_mode *mode)
{
int err;
err = mipi_dsi_dcs_set_column_address(left, 0, mode->hdisplay / 2 - 1);
if (err < 0) {
dev_err(&left->dev, "failed to set column address: %d\n", err);
return err;
}
err = mipi_dsi_dcs_set_page_address(left, 0, mode->vdisplay - 1);
if (err < 0) {
dev_err(&left->dev, "failed to set page address: %d\n", err);
return err;
}
err = mipi_dsi_dcs_set_column_address(right, mode->hdisplay / 2,
mode->hdisplay - 1);
if (err < 0) {
dev_err(&right->dev, "failed to set column address: %d\n", err);
return err;
}
err = mipi_dsi_dcs_set_page_address(right, 0, mode->vdisplay - 1);
if (err < 0) {
dev_err(&right->dev, "failed to set page address: %d\n", err);
return err;
}
return 0;
}
static int sharp_panel_prepare(struct drm_panel *panel)
{
struct sharp_panel *sharp = to_sharp_panel(panel);
u8 format = MIPI_DCS_PIXEL_FMT_24BIT;
int err;
if (sharp->prepared)
return 0;
err = regulator_enable(sharp->supply);
if (err < 0)
return err;
/*
* According to the datasheet, the panel needs around 10 ms to fully
* power up. At least another 120 ms is required before exiting sleep
* mode to make sure the panel is ready. Throw in another 20 ms for
* good measure.
*/
msleep(150);
err = mipi_dsi_dcs_exit_sleep_mode(sharp->link1);
if (err < 0) {
dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
goto poweroff;
}
/*
* The MIPI DCS specification mandates this delay only between the
* exit_sleep_mode and enter_sleep_mode commands, so it isn't strictly
* necessary here.
*/
/*
msleep(120);
*/
/* set left-right mode */
err = sharp_panel_write(sharp, 0x1000, 0x2a);
if (err < 0) {
dev_err(panel->dev, "failed to set left-right mode: %d\n", err);
goto poweroff;
}
/* enable command mode */
err = sharp_panel_write(sharp, 0x1001, 0x01);
if (err < 0) {
dev_err(panel->dev, "failed to enable command mode: %d\n", err);
goto poweroff;
}
err = mipi_dsi_dcs_set_pixel_format(sharp->link1, format);
if (err < 0) {
dev_err(panel->dev, "failed to set pixel format: %d\n", err);
goto poweroff;
}
/*
* TODO: The device supports both left-right and even-odd split
* configurations, but this driver currently supports only the left-
* right split. To support a different mode a mechanism needs to be
* put in place to communicate the configuration back to the DSI host
* controller.
*/
err = sharp_setup_symmetrical_split(sharp->link1, sharp->link2,
sharp->mode);
if (err < 0) {
dev_err(panel->dev, "failed to set up symmetrical split: %d\n",
err);
goto poweroff;
}
err = mipi_dsi_dcs_set_display_on(sharp->link1);
if (err < 0) {
dev_err(panel->dev, "failed to set display on: %d\n", err);
goto poweroff;
}
sharp->prepared = true;
/* wait for 6 frames before continuing */
sharp_wait_frames(sharp, 6);
return 0;
poweroff:
regulator_disable(sharp->supply);
return err;
}
static int sharp_panel_enable(struct drm_panel *panel)
{
struct sharp_panel *sharp = to_sharp_panel(panel);
if (sharp->enabled)
return 0;
sharp->enabled = true;
return 0;
}
static const struct drm_display_mode default_mode = {
.clock = 278000,
.hdisplay = 2560,
.hsync_start = 2560 + 128,
.hsync_end = 2560 + 128 + 64,
.htotal = 2560 + 128 + 64 + 64,
.vdisplay = 1600,
.vsync_start = 1600 + 4,
.vsync_end = 1600 + 4 + 8,
.vtotal = 1600 + 4 + 8 + 32,
.vrefresh = 60,
};
static int sharp_panel_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
dev_err(panel->dev, "failed to add mode %ux%ux@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
default_mode.vrefresh);
return -ENOMEM;
}
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
connector->display_info.width_mm = 217;
connector->display_info.height_mm = 136;
return 1;
}
static const struct drm_panel_funcs sharp_panel_funcs = {
.disable = sharp_panel_disable,
.unprepare = sharp_panel_unprepare,
.prepare = sharp_panel_prepare,
.enable = sharp_panel_enable,
.get_modes = sharp_panel_get_modes,
};
static const struct of_device_id sharp_of_match[] = {
{ .compatible = "sharp,lq101r1sx01", },
{ }
};
MODULE_DEVICE_TABLE(of, sharp_of_match);
static int sharp_panel_add(struct sharp_panel *sharp)
{
int ret;
sharp->mode = &default_mode;
sharp->supply = devm_regulator_get(&sharp->link1->dev, "power");
if (IS_ERR(sharp->supply))
return PTR_ERR(sharp->supply);
drm_panel_init(&sharp->base, &sharp->link1->dev, &sharp_panel_funcs,
DRM_MODE_CONNECTOR_DSI);
ret = drm_panel_of_backlight(&sharp->base);
if (ret)
return ret;
return drm_panel_add(&sharp->base);
}
static void sharp_panel_del(struct sharp_panel *sharp)
{
if (sharp->base.dev)
drm_panel_remove(&sharp->base);
if (sharp->link2)
put_device(&sharp->link2->dev);
}
static int sharp_panel_probe(struct mipi_dsi_device *dsi)
{
struct mipi_dsi_device *secondary = NULL;
struct sharp_panel *sharp;
struct device_node *np;
int err;
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_LPM;
/* Find DSI-LINK1 */
np = of_parse_phandle(dsi->dev.of_node, "link2", 0);
if (np) {
secondary = of_find_mipi_dsi_device_by_node(np);
of_node_put(np);
if (!secondary)
return -EPROBE_DEFER;
}
/* register a panel for only the DSI-LINK1 interface */
if (secondary) {
sharp = devm_kzalloc(&dsi->dev, sizeof(*sharp), GFP_KERNEL);
if (!sharp) {
put_device(&secondary->dev);
return -ENOMEM;
}
mipi_dsi_set_drvdata(dsi, sharp);
sharp->link2 = secondary;
sharp->link1 = dsi;
err = sharp_panel_add(sharp);
if (err < 0) {
put_device(&secondary->dev);
return err;
}
}
err = mipi_dsi_attach(dsi);
if (err < 0) {
if (secondary)
sharp_panel_del(sharp);
return err;
}
return 0;
}
static int sharp_panel_remove(struct mipi_dsi_device *dsi)
{
struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
int err;
/* only detach from host for the DSI-LINK2 interface */
if (!sharp) {
mipi_dsi_detach(dsi);
return 0;
}
err = drm_panel_disable(&sharp->base);
if (err < 0)
dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
err = mipi_dsi_detach(dsi);
if (err < 0)
dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
sharp_panel_del(sharp);
return 0;
}
static void sharp_panel_shutdown(struct mipi_dsi_device *dsi)
{
struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
/* nothing to do for DSI-LINK2 */
if (!sharp)
return;
drm_panel_disable(&sharp->base);
}
static struct mipi_dsi_driver sharp_panel_driver = {
.driver = {
.name = "panel-sharp-lq101r1sx01",
.of_match_table = sharp_of_match,
},
.probe = sharp_panel_probe,
.remove = sharp_panel_remove,
.shutdown = sharp_panel_shutdown,
};
module_mipi_dsi_driver(sharp_panel_driver);
MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
MODULE_DESCRIPTION("Sharp LQ101R1SX01 panel driver");
MODULE_LICENSE("GPL v2");