linux/drivers/net/wireless/rt2x00
Helmut Schaa 7fe7ee7776 rt2x00: Generate sw sequence numbers only for devices that need it
Newer devices like rt2800* own a hardware sequence counter and thus
don't need to use a software sequence counter at all. Add a new driver
flag to shortcut the software sequence number generation on devices that
don't need it.

rt61pci, rt73usb and rt2800* seem to make use of a hw sequence counter
while rt2400pci and rt2500* need to do it in software.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
..
Kconfig rt2x00: Add support for RT5390 chip 2011-02-21 15:40:00 -05:00
Makefile
rt2x00.h rt2x00: Generate sw sequence numbers only for devices that need it 2011-03-04 14:06:47 -05:00
rt2x00config.c rt2x00: Fix pointer errors. 2011-01-04 14:35:14 -05:00
rt2x00crypto.c
rt2x00debug.c rt2x00: Protect queue control with mutex 2010-12-13 15:23:35 -05:00
rt2x00debug.h
rt2x00dev.c rt2x00: Move TX/RX work into dedicated workqueue 2011-01-31 15:06:25 -05:00
rt2x00dump.h
rt2x00firmware.c rt2x00: Don't leak mem in error path of rt2x00lib_request_firmware() 2011-01-13 15:46:45 -05:00
rt2x00ht.c rt2x00: Remove superfluos empty line 2011-02-21 15:39:59 -05:00
rt2x00leds.c
rt2x00leds.h
rt2x00lib.h rt2x00: Introduce beacon_update_locked that requires caller locking 2011-01-31 15:06:22 -05:00
rt2x00link.c rt2x00: Move TX/RX work into dedicated workqueue 2011-01-31 15:06:25 -05:00
rt2x00mac.c rt2x00: Use unlikely for unexpected error condition in rt2x00_mac_tx 2011-03-04 14:06:47 -05:00
rt2x00pci.c rt2x00: Remove interrupt thread registration 2011-01-31 15:06:23 -05:00
rt2x00pci.h rt2x00: Fix firmware loading regression on x86_64. 2010-12-13 15:23:37 -05:00
rt2x00queue.c rt2x00: Generate sw sequence numbers only for devices that need it 2011-03-04 14:06:47 -05:00
rt2x00queue.h rt2x00: Fix WMM Queue naming 2010-12-13 15:23:36 -05:00
rt2x00reg.h rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR 2011-01-31 15:06:24 -05:00
rt2x00soc.c rt2x00: Use ioremap for SoC devices instead of KSEG1ADDR. 2010-11-17 16:18:54 -05:00
rt2x00soc.h
rt2x00usb.c rt2x00: Move TX/RX work into dedicated workqueue 2011-01-31 15:06:25 -05:00
rt2x00usb.h rt2x00: Add "flush" queue command 2010-12-13 15:23:35 -05:00
rt61pci.c rt2x00: Optimize calls to rt2x00queue_get_queue 2011-03-04 14:06:46 -05:00
rt61pci.h rt2x00: Fix WMM Queue naming 2010-12-13 15:23:36 -05:00
rt73usb.c rt2x00: Optimize calls to rt2x00queue_get_queue 2011-03-04 14:06:46 -05:00
rt73usb.h rt2x00: Fix WMM Queue naming 2010-12-13 15:23:36 -05:00
rt2400pci.c rt2x00: Generate sw sequence numbers only for devices that need it 2011-03-04 14:06:47 -05:00
rt2400pci.h
rt2500pci.c rt2x00: Generate sw sequence numbers only for devices that need it 2011-03-04 14:06:47 -05:00
rt2500pci.h
rt2500usb.c rt2x00: Generate sw sequence numbers only for devices that need it 2011-03-04 14:06:47 -05:00
rt2500usb.h
rt2800.h rt2x00: fix whitespace damage in the rt2800 specific code 2011-03-04 14:05:18 -05:00
rt2800lib.c rt2x00: Add unlikely macro to special case tx status handling 2011-03-04 14:06:47 -05:00
rt2800lib.h rt2x00: Refactor beacon code to make use of start- and stop_queue 2011-01-31 15:06:22 -05:00
rt2800pci.c rt2x00: Make use of unlikely during tx status processing 2011-03-04 14:06:46 -05:00
rt2800pci.h
rt2800usb.c rt2x00: Fix WPA TKIP Michael MIC failures. 2011-01-31 15:06:24 -05:00
rt2800usb.h