linux/drivers/pwm/pwm-jz4740.c
Paul Cercueil 6580fd1730 pwm: jz4740: Force TCU2 channels to return to their init level
When the PWM mode of TCU2 channels is disabled, their corresponding pin
does not always return to its initial level. Force this by using a small
trick: we set duty > period, which is an invalid configuration for the
hardware, which then correctly resets the pin to the initial level.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26 11:39:05 +02:00

210 lines
5.0 KiB
C

/*
* Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
* JZ4740 platform PWM support
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <asm/mach-jz4740/timer.h>
#define NUM_PWM 8
struct jz4740_pwm_chip {
struct pwm_chip chip;
struct clk *clk;
};
static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
{
return container_of(chip, struct jz4740_pwm_chip, chip);
}
static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
/*
* Timers 0 and 1 are used for system tasks, so they are unavailable
* for use as PWMs.
*/
if (pwm->hwpwm < 2)
return -EBUSY;
jz4740_timer_start(pwm->hwpwm);
return 0;
}
static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
jz4740_timer_set_ctrl(pwm->hwpwm, 0);
jz4740_timer_stop(pwm->hwpwm);
}
static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
jz4740_timer_enable(pwm->hwpwm);
return 0;
}
static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
/*
* Set duty > period. This trick allows the TCU channels in TCU2 mode to
* properly return to their init level.
*/
jz4740_timer_set_duty(pwm->hwpwm, 0xffff);
jz4740_timer_set_period(pwm->hwpwm, 0x0);
/*
* Disable PWM output.
* In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
* counter is stopped, while in TCU1 mode the order does not matter.
*/
ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
/* Stop counter */
jz4740_timer_disable(pwm->hwpwm);
}
static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
unsigned long long tmp;
unsigned long period, duty;
unsigned int prescaler = 0;
uint16_t ctrl;
tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period;
do_div(tmp, 1000000000);
period = tmp;
while (period > 0xffff && prescaler < 6) {
period >>= 2;
++prescaler;
}
if (prescaler == 6)
return -EINVAL;
tmp = (unsigned long long)period * state->duty_cycle;
do_div(tmp, state->period);
duty = period - tmp;
if (duty >= period)
duty = period - 1;
jz4740_pwm_disable(chip, pwm);
jz4740_timer_set_count(pwm->hwpwm, 0);
jz4740_timer_set_duty(pwm->hwpwm, duty);
jz4740_timer_set_period(pwm->hwpwm, period);
ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
switch (state->polarity) {
case PWM_POLARITY_NORMAL:
ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
break;
case PWM_POLARITY_INVERSED:
ctrl |= JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
break;
}
jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
if (state->enabled)
jz4740_pwm_enable(chip, pwm);
return 0;
}
static const struct pwm_ops jz4740_pwm_ops = {
.request = jz4740_pwm_request,
.free = jz4740_pwm_free,
.apply = jz4740_pwm_apply,
.owner = THIS_MODULE,
};
static int jz4740_pwm_probe(struct platform_device *pdev)
{
struct jz4740_pwm_chip *jz4740;
jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
if (!jz4740)
return -ENOMEM;
jz4740->clk = devm_clk_get(&pdev->dev, "ext");
if (IS_ERR(jz4740->clk))
return PTR_ERR(jz4740->clk);
jz4740->chip.dev = &pdev->dev;
jz4740->chip.ops = &jz4740_pwm_ops;
jz4740->chip.npwm = NUM_PWM;
jz4740->chip.base = -1;
jz4740->chip.of_xlate = of_pwm_xlate_with_flags;
jz4740->chip.of_pwm_n_cells = 3;
platform_set_drvdata(pdev, jz4740);
return pwmchip_add(&jz4740->chip);
}
static int jz4740_pwm_remove(struct platform_device *pdev)
{
struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev);
return pwmchip_remove(&jz4740->chip);
}
#ifdef CONFIG_OF
static const struct of_device_id jz4740_pwm_dt_ids[] = {
{ .compatible = "ingenic,jz4740-pwm", },
{},
};
MODULE_DEVICE_TABLE(of, jz4740_pwm_dt_ids);
#endif
static struct platform_driver jz4740_pwm_driver = {
.driver = {
.name = "jz4740-pwm",
.of_match_table = of_match_ptr(jz4740_pwm_dt_ids),
},
.probe = jz4740_pwm_probe,
.remove = jz4740_pwm_remove,
};
module_platform_driver(jz4740_pwm_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver");
MODULE_ALIAS("platform:jz4740-pwm");
MODULE_LICENSE("GPL");