forked from Minki/linux
4b003f5fca
Commit45c940184b
("dt-bindings: clk: versaclock5: convert to yaml") accidentally changed "idt,voltage-microvolts" to "idt,voltage-microvolt" in the DT bindings, while the driver still used the former. Update the driver to match the bindings, as Documentation/devicetree/bindings/property-units.txt actually recommends using "microvolt". Fixes:260249f929
("clk: vc5: Enable addition output configurations of the Versaclock") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201218125253.3815567-1-geert+renesas@glider.be Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
1147 lines
32 KiB
C
1147 lines
32 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for IDT Versaclock 5
|
|
*
|
|
* Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
|
|
*/
|
|
|
|
/*
|
|
* Possible optimizations:
|
|
* - Use spread spectrum
|
|
* - Use integer divider in FOD if applicable
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/rational.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <dt-bindings/clk/versaclock.h>
|
|
|
|
/* VersaClock5 registers */
|
|
#define VC5_OTP_CONTROL 0x00
|
|
|
|
/* Factory-reserved register block */
|
|
#define VC5_RSVD_DEVICE_ID 0x01
|
|
#define VC5_RSVD_ADC_GAIN_7_0 0x02
|
|
#define VC5_RSVD_ADC_GAIN_15_8 0x03
|
|
#define VC5_RSVD_ADC_OFFSET_7_0 0x04
|
|
#define VC5_RSVD_ADC_OFFSET_15_8 0x05
|
|
#define VC5_RSVD_TEMPY 0x06
|
|
#define VC5_RSVD_OFFSET_TBIN 0x07
|
|
#define VC5_RSVD_GAIN 0x08
|
|
#define VC5_RSVD_TEST_NP 0x09
|
|
#define VC5_RSVD_UNUSED 0x0a
|
|
#define VC5_RSVD_BANDGAP_TRIM_UP 0x0b
|
|
#define VC5_RSVD_BANDGAP_TRIM_DN 0x0c
|
|
#define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d
|
|
#define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e
|
|
#define VC5_RSVD_CLK_AMP_123 0x0f
|
|
|
|
/* Configuration register block */
|
|
#define VC5_PRIM_SRC_SHDN 0x10
|
|
#define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7)
|
|
#define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6)
|
|
#define VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ BIT(3)
|
|
#define VC5_PRIM_SRC_SHDN_SP BIT(1)
|
|
#define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0)
|
|
|
|
#define VC5_VCO_BAND 0x11
|
|
#define VC5_XTAL_X1_LOAD_CAP 0x12
|
|
#define VC5_XTAL_X2_LOAD_CAP 0x13
|
|
#define VC5_REF_DIVIDER 0x15
|
|
#define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7)
|
|
#define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f)
|
|
|
|
#define VC5_VCO_CTRL_AND_PREDIV 0x16
|
|
#define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7)
|
|
|
|
#define VC5_FEEDBACK_INT_DIV 0x17
|
|
#define VC5_FEEDBACK_INT_DIV_BITS 0x18
|
|
#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n))
|
|
#define VC5_RC_CONTROL0 0x1e
|
|
#define VC5_RC_CONTROL1 0x1f
|
|
/* Register 0x20 is factory reserved */
|
|
|
|
/* Output divider control for divider 1,2,3,4 */
|
|
#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10))
|
|
#define VC5_OUT_DIV_CONTROL_RESET BIT(7)
|
|
#define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3)
|
|
#define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2)
|
|
#define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1)
|
|
#define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0)
|
|
|
|
#define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n))
|
|
#define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1)
|
|
|
|
#define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n))
|
|
#define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n))
|
|
#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n))
|
|
#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n))
|
|
#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10))
|
|
/* Registers 0x30, 0x40, 0x50 are factory reserved */
|
|
|
|
/* Clock control register for clock 1,2 */
|
|
#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT)
|
|
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL)
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS)
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33)
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS)
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2)
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD)
|
|
#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25)
|
|
|
|
#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3
|
|
#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0
|
|
#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
|
|
#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0)
|
|
|
|
#define VC5_CLK_OE_SHDN 0x68
|
|
#define VC5_CLK_OS_SHDN 0x69
|
|
|
|
#define VC5_GLOBAL_REGISTER 0x76
|
|
#define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5)
|
|
|
|
/* PLL/VCO runs between 2.5 GHz and 3.0 GHz */
|
|
#define VC5_PLL_VCO_MIN 2500000000UL
|
|
#define VC5_PLL_VCO_MAX 3000000000UL
|
|
|
|
/* VC5 Input mux settings */
|
|
#define VC5_MUX_IN_XIN BIT(0)
|
|
#define VC5_MUX_IN_CLKIN BIT(1)
|
|
|
|
/* Maximum number of clk_out supported by this driver */
|
|
#define VC5_MAX_CLK_OUT_NUM 5
|
|
|
|
/* Maximum number of FODs supported by this driver */
|
|
#define VC5_MAX_FOD_NUM 4
|
|
|
|
/* flags to describe chip features */
|
|
/* chip has built-in oscilator */
|
|
#define VC5_HAS_INTERNAL_XTAL BIT(0)
|
|
/* chip has PFD requency doubler */
|
|
#define VC5_HAS_PFD_FREQ_DBL BIT(1)
|
|
|
|
/* Supported IDT VC5 models. */
|
|
enum vc5_model {
|
|
IDT_VC5_5P49V5923,
|
|
IDT_VC5_5P49V5925,
|
|
IDT_VC5_5P49V5933,
|
|
IDT_VC5_5P49V5935,
|
|
IDT_VC6_5P49V6901,
|
|
IDT_VC6_5P49V6965,
|
|
};
|
|
|
|
/* Structure to describe features of a particular VC5 model */
|
|
struct vc5_chip_info {
|
|
const enum vc5_model model;
|
|
const unsigned int clk_fod_cnt;
|
|
const unsigned int clk_out_cnt;
|
|
const u32 flags;
|
|
};
|
|
|
|
struct vc5_driver_data;
|
|
|
|
struct vc5_hw_data {
|
|
struct clk_hw hw;
|
|
struct vc5_driver_data *vc5;
|
|
u32 div_int;
|
|
u32 div_frc;
|
|
unsigned int num;
|
|
};
|
|
|
|
struct vc5_out_data {
|
|
struct clk_hw hw;
|
|
struct vc5_driver_data *vc5;
|
|
unsigned int num;
|
|
unsigned int clk_output_cfg0;
|
|
unsigned int clk_output_cfg0_mask;
|
|
};
|
|
|
|
struct vc5_driver_data {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
const struct vc5_chip_info *chip_info;
|
|
|
|
struct clk *pin_xin;
|
|
struct clk *pin_clkin;
|
|
unsigned char clk_mux_ins;
|
|
struct clk_hw clk_mux;
|
|
struct clk_hw clk_mul;
|
|
struct clk_hw clk_pfd;
|
|
struct vc5_hw_data clk_pll;
|
|
struct vc5_hw_data clk_fod[VC5_MAX_FOD_NUM];
|
|
struct vc5_out_data clk_out[VC5_MAX_CLK_OUT_NUM];
|
|
};
|
|
|
|
/*
|
|
* VersaClock5 i2c regmap
|
|
*/
|
|
static bool vc5_regmap_is_writeable(struct device *dev, unsigned int reg)
|
|
{
|
|
/* Factory reserved regs, make them read-only */
|
|
if (reg <= 0xf)
|
|
return false;
|
|
|
|
/* Factory reserved regs, make them read-only */
|
|
if (reg == 0x14 || reg == 0x1c || reg == 0x1d)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static const struct regmap_config vc5_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.max_register = 0x76,
|
|
.writeable_reg = vc5_regmap_is_writeable,
|
|
};
|
|
|
|
/*
|
|
* VersaClock5 input multiplexer between XTAL and CLKIN divider
|
|
*/
|
|
static unsigned char vc5_mux_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct vc5_driver_data *vc5 =
|
|
container_of(hw, struct vc5_driver_data, clk_mux);
|
|
const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
|
|
unsigned int src;
|
|
|
|
regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src);
|
|
src &= mask;
|
|
|
|
if (src == VC5_PRIM_SRC_SHDN_EN_XTAL)
|
|
return 0;
|
|
|
|
if (src == VC5_PRIM_SRC_SHDN_EN_CLKIN)
|
|
return 1;
|
|
|
|
dev_warn(&vc5->client->dev,
|
|
"Invalid clock input configuration (%02x)\n", src);
|
|
return 0;
|
|
}
|
|
|
|
static int vc5_mux_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct vc5_driver_data *vc5 =
|
|
container_of(hw, struct vc5_driver_data, clk_mux);
|
|
const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
|
|
u8 src;
|
|
|
|
if ((index > 1) || !vc5->clk_mux_ins)
|
|
return -EINVAL;
|
|
|
|
if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) {
|
|
if (index == 0)
|
|
src = VC5_PRIM_SRC_SHDN_EN_XTAL;
|
|
if (index == 1)
|
|
src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
|
|
} else {
|
|
if (index != 0)
|
|
return -EINVAL;
|
|
|
|
if (vc5->clk_mux_ins == VC5_MUX_IN_XIN)
|
|
src = VC5_PRIM_SRC_SHDN_EN_XTAL;
|
|
else if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
|
|
src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
|
|
else /* Invalid; should have been caught by vc5_probe() */
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src);
|
|
}
|
|
|
|
static const struct clk_ops vc5_mux_ops = {
|
|
.set_parent = vc5_mux_set_parent,
|
|
.get_parent = vc5_mux_get_parent,
|
|
};
|
|
|
|
static unsigned long vc5_dbl_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_driver_data *vc5 =
|
|
container_of(hw, struct vc5_driver_data, clk_mul);
|
|
unsigned int premul;
|
|
|
|
regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &premul);
|
|
if (premul & VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ)
|
|
parent_rate *= 2;
|
|
|
|
return parent_rate;
|
|
}
|
|
|
|
static long vc5_dbl_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
if ((*parent_rate == rate) || ((*parent_rate * 2) == rate))
|
|
return rate;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vc5_dbl_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_driver_data *vc5 =
|
|
container_of(hw, struct vc5_driver_data, clk_mul);
|
|
u32 mask;
|
|
|
|
if ((parent_rate * 2) == rate)
|
|
mask = VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ;
|
|
else
|
|
mask = 0;
|
|
|
|
regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN,
|
|
VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ,
|
|
mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops vc5_dbl_ops = {
|
|
.recalc_rate = vc5_dbl_recalc_rate,
|
|
.round_rate = vc5_dbl_round_rate,
|
|
.set_rate = vc5_dbl_set_rate,
|
|
};
|
|
|
|
static unsigned long vc5_pfd_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_driver_data *vc5 =
|
|
container_of(hw, struct vc5_driver_data, clk_pfd);
|
|
unsigned int prediv, div;
|
|
|
|
regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv);
|
|
|
|
/* The bypass_prediv is set, PLL fed from Ref_in directly. */
|
|
if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV)
|
|
return parent_rate;
|
|
|
|
regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div);
|
|
|
|
/* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */
|
|
if (div & VC5_REF_DIVIDER_SEL_PREDIV2)
|
|
return parent_rate / 2;
|
|
else
|
|
return parent_rate / VC5_REF_DIVIDER_REF_DIV(div);
|
|
}
|
|
|
|
static long vc5_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
unsigned long idiv;
|
|
|
|
/* PLL cannot operate with input clock above 50 MHz. */
|
|
if (rate > 50000000)
|
|
return -EINVAL;
|
|
|
|
/* CLKIN within range of PLL input, feed directly to PLL. */
|
|
if (*parent_rate <= 50000000)
|
|
return *parent_rate;
|
|
|
|
idiv = DIV_ROUND_UP(*parent_rate, rate);
|
|
if (idiv > 127)
|
|
return -EINVAL;
|
|
|
|
return *parent_rate / idiv;
|
|
}
|
|
|
|
static int vc5_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_driver_data *vc5 =
|
|
container_of(hw, struct vc5_driver_data, clk_pfd);
|
|
unsigned long idiv;
|
|
u8 div;
|
|
|
|
/* CLKIN within range of PLL input, feed directly to PLL. */
|
|
if (parent_rate <= 50000000) {
|
|
regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
|
|
VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV,
|
|
VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
|
|
regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00);
|
|
return 0;
|
|
}
|
|
|
|
idiv = DIV_ROUND_UP(parent_rate, rate);
|
|
|
|
/* We have dedicated div-2 predivider. */
|
|
if (idiv == 2)
|
|
div = VC5_REF_DIVIDER_SEL_PREDIV2;
|
|
else
|
|
div = VC5_REF_DIVIDER_REF_DIV(idiv);
|
|
|
|
regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div);
|
|
regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
|
|
VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops vc5_pfd_ops = {
|
|
.recalc_rate = vc5_pfd_recalc_rate,
|
|
.round_rate = vc5_pfd_round_rate,
|
|
.set_rate = vc5_pfd_set_rate,
|
|
};
|
|
|
|
/*
|
|
* VersaClock5 PLL/VCO
|
|
*/
|
|
static unsigned long vc5_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
u32 div_int, div_frc;
|
|
u8 fb[5];
|
|
|
|
regmap_bulk_read(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
|
|
|
|
div_int = (fb[0] << 4) | (fb[1] >> 4);
|
|
div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4];
|
|
|
|
/* The PLL divider has 12 integer bits and 24 fractional bits */
|
|
return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
|
|
}
|
|
|
|
static long vc5_pll_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
|
|
u32 div_int;
|
|
u64 div_frc;
|
|
|
|
if (rate < VC5_PLL_VCO_MIN)
|
|
rate = VC5_PLL_VCO_MIN;
|
|
if (rate > VC5_PLL_VCO_MAX)
|
|
rate = VC5_PLL_VCO_MAX;
|
|
|
|
/* Determine integer part, which is 12 bit wide */
|
|
div_int = rate / *parent_rate;
|
|
if (div_int > 0xfff)
|
|
rate = *parent_rate * 0xfff;
|
|
|
|
/* Determine best fractional part, which is 24 bit wide */
|
|
div_frc = rate % *parent_rate;
|
|
div_frc *= BIT(24) - 1;
|
|
do_div(div_frc, *parent_rate);
|
|
|
|
hwdata->div_int = div_int;
|
|
hwdata->div_frc = (u32)div_frc;
|
|
|
|
return (*parent_rate * div_int) + ((*parent_rate * div_frc) >> 24);
|
|
}
|
|
|
|
static int vc5_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
u8 fb[5];
|
|
|
|
fb[0] = hwdata->div_int >> 4;
|
|
fb[1] = hwdata->div_int << 4;
|
|
fb[2] = hwdata->div_frc >> 16;
|
|
fb[3] = hwdata->div_frc >> 8;
|
|
fb[4] = hwdata->div_frc;
|
|
|
|
return regmap_bulk_write(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
|
|
}
|
|
|
|
static const struct clk_ops vc5_pll_ops = {
|
|
.recalc_rate = vc5_pll_recalc_rate,
|
|
.round_rate = vc5_pll_round_rate,
|
|
.set_rate = vc5_pll_set_rate,
|
|
};
|
|
|
|
static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
/* VCO frequency is divided by two before entering FOD */
|
|
u32 f_in = parent_rate / 2;
|
|
u32 div_int, div_frc;
|
|
u8 od_int[2];
|
|
u8 od_frc[4];
|
|
|
|
regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_INT(hwdata->num, 0),
|
|
od_int, 2);
|
|
regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
|
|
od_frc, 4);
|
|
|
|
div_int = (od_int[0] << 4) | (od_int[1] >> 4);
|
|
div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
|
|
(od_frc[2] << 6) | (od_frc[3] >> 2);
|
|
|
|
/* Avoid division by zero if the output is not configured. */
|
|
if (div_int == 0 && div_frc == 0)
|
|
return 0;
|
|
|
|
/* The PLL divider has 12 integer bits and 30 fractional bits */
|
|
return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
|
|
}
|
|
|
|
static long vc5_fod_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
|
|
/* VCO frequency is divided by two before entering FOD */
|
|
u32 f_in = *parent_rate / 2;
|
|
u32 div_int;
|
|
u64 div_frc;
|
|
|
|
/* Determine integer part, which is 12 bit wide */
|
|
div_int = f_in / rate;
|
|
/*
|
|
* WARNING: The clock chip does not output signal if the integer part
|
|
* of the divider is 0xfff and fractional part is non-zero.
|
|
* Clamp the divider at 0xffe to keep the code simple.
|
|
*/
|
|
if (div_int > 0xffe) {
|
|
div_int = 0xffe;
|
|
rate = f_in / div_int;
|
|
}
|
|
|
|
/* Determine best fractional part, which is 30 bit wide */
|
|
div_frc = f_in % rate;
|
|
div_frc <<= 24;
|
|
do_div(div_frc, rate);
|
|
|
|
hwdata->div_int = div_int;
|
|
hwdata->div_frc = (u32)div_frc;
|
|
|
|
return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
|
|
}
|
|
|
|
static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
u8 data[14] = {
|
|
hwdata->div_frc >> 22, hwdata->div_frc >> 14,
|
|
hwdata->div_frc >> 6, hwdata->div_frc << 2,
|
|
0, 0, 0, 0, 0,
|
|
0, 0,
|
|
hwdata->div_int >> 4, hwdata->div_int << 4,
|
|
0
|
|
};
|
|
|
|
regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
|
|
data, 14);
|
|
|
|
/*
|
|
* Toggle magic bit in undocumented register for unknown reason.
|
|
* This is what the IDT timing commander tool does and the chip
|
|
* datasheet somewhat implies this is needed, but the register
|
|
* and the bit is not documented.
|
|
*/
|
|
regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
|
|
VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0);
|
|
regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
|
|
VC5_GLOBAL_REGISTER_GLOBAL_RESET,
|
|
VC5_GLOBAL_REGISTER_GLOBAL_RESET);
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops vc5_fod_ops = {
|
|
.recalc_rate = vc5_fod_recalc_rate,
|
|
.round_rate = vc5_fod_round_rate,
|
|
.set_rate = vc5_fod_set_rate,
|
|
};
|
|
|
|
static int vc5_clk_out_prepare(struct clk_hw *hw)
|
|
{
|
|
struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
|
|
VC5_OUT_DIV_CONTROL_SEL_EXT |
|
|
VC5_OUT_DIV_CONTROL_EN_FOD;
|
|
unsigned int src;
|
|
int ret;
|
|
|
|
/*
|
|
* If the input mux is disabled, enable it first and
|
|
* select source from matching FOD.
|
|
*/
|
|
regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
|
|
if ((src & mask) == 0) {
|
|
src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD;
|
|
ret = regmap_update_bits(vc5->regmap,
|
|
VC5_OUT_DIV_CONTROL(hwdata->num),
|
|
mask | VC5_OUT_DIV_CONTROL_RESET, src);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Enable the clock buffer */
|
|
regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
|
|
VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
|
|
VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
|
|
if (hwdata->clk_output_cfg0_mask) {
|
|
dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n",
|
|
hwdata->num, hwdata->clk_output_cfg0_mask,
|
|
hwdata->clk_output_cfg0);
|
|
|
|
regmap_update_bits(vc5->regmap,
|
|
VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
|
|
hwdata->clk_output_cfg0_mask,
|
|
hwdata->clk_output_cfg0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vc5_clk_out_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
|
|
/* Disable the clock buffer */
|
|
regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
|
|
VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0);
|
|
}
|
|
|
|
static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
|
|
VC5_OUT_DIV_CONTROL_SEL_EXT |
|
|
VC5_OUT_DIV_CONTROL_EN_FOD;
|
|
const u8 fodclkmask = VC5_OUT_DIV_CONTROL_SELB_NORM |
|
|
VC5_OUT_DIV_CONTROL_EN_FOD;
|
|
const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
|
|
VC5_OUT_DIV_CONTROL_SEL_EXT;
|
|
unsigned int src;
|
|
|
|
regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
|
|
src &= mask;
|
|
|
|
if (src == 0) /* Input mux set to DISABLED */
|
|
return 0;
|
|
|
|
if ((src & fodclkmask) == VC5_OUT_DIV_CONTROL_EN_FOD)
|
|
return 0;
|
|
|
|
if (src == extclk)
|
|
return 1;
|
|
|
|
dev_warn(&vc5->client->dev,
|
|
"Invalid clock output configuration (%02x)\n", src);
|
|
return 0;
|
|
}
|
|
|
|
static int vc5_clk_out_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
|
|
struct vc5_driver_data *vc5 = hwdata->vc5;
|
|
const u8 mask = VC5_OUT_DIV_CONTROL_RESET |
|
|
VC5_OUT_DIV_CONTROL_SELB_NORM |
|
|
VC5_OUT_DIV_CONTROL_SEL_EXT |
|
|
VC5_OUT_DIV_CONTROL_EN_FOD;
|
|
const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
|
|
VC5_OUT_DIV_CONTROL_SEL_EXT;
|
|
u8 src = VC5_OUT_DIV_CONTROL_RESET;
|
|
|
|
if (index == 0)
|
|
src |= VC5_OUT_DIV_CONTROL_EN_FOD;
|
|
else
|
|
src |= extclk;
|
|
|
|
return regmap_update_bits(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num),
|
|
mask, src);
|
|
}
|
|
|
|
static const struct clk_ops vc5_clk_out_ops = {
|
|
.prepare = vc5_clk_out_prepare,
|
|
.unprepare = vc5_clk_out_unprepare,
|
|
.set_parent = vc5_clk_out_set_parent,
|
|
.get_parent = vc5_clk_out_get_parent,
|
|
};
|
|
|
|
static struct clk_hw *vc5_of_clk_get(struct of_phandle_args *clkspec,
|
|
void *data)
|
|
{
|
|
struct vc5_driver_data *vc5 = data;
|
|
unsigned int idx = clkspec->args[0];
|
|
|
|
if (idx >= vc5->chip_info->clk_out_cnt)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return &vc5->clk_out[idx].hw;
|
|
}
|
|
|
|
static int vc5_map_index_to_output(const enum vc5_model model,
|
|
const unsigned int n)
|
|
{
|
|
switch (model) {
|
|
case IDT_VC5_5P49V5933:
|
|
return (n == 0) ? 0 : 3;
|
|
case IDT_VC5_5P49V5923:
|
|
case IDT_VC5_5P49V5925:
|
|
case IDT_VC5_5P49V5935:
|
|
case IDT_VC6_5P49V6901:
|
|
case IDT_VC6_5P49V6965:
|
|
default:
|
|
return n;
|
|
}
|
|
}
|
|
|
|
static int vc5_update_mode(struct device_node *np_output,
|
|
struct vc5_out_data *clk_out)
|
|
{
|
|
u32 value;
|
|
|
|
if (!of_property_read_u32(np_output, "idt,mode", &value)) {
|
|
clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK;
|
|
switch (value) {
|
|
case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL:
|
|
case VC5_CLK_OUTPUT_CFG0_CFG_CMOS:
|
|
case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33:
|
|
case VC5_CLK_OUTPUT_CFG0_CFG_LVDS:
|
|
case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2:
|
|
case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD:
|
|
case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25:
|
|
clk_out->clk_output_cfg0 |=
|
|
value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vc5_update_power(struct device_node *np_output,
|
|
struct vc5_out_data *clk_out)
|
|
{
|
|
u32 value;
|
|
|
|
if (!of_property_read_u32(np_output, "idt,voltage-microvolt",
|
|
&value)) {
|
|
clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK;
|
|
switch (value) {
|
|
case 1800000:
|
|
clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18;
|
|
break;
|
|
case 2500000:
|
|
clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25;
|
|
break;
|
|
case 3300000:
|
|
clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vc5_update_slew(struct device_node *np_output,
|
|
struct vc5_out_data *clk_out)
|
|
{
|
|
u32 value;
|
|
|
|
if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) {
|
|
clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK;
|
|
switch (value) {
|
|
case 80:
|
|
clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80;
|
|
break;
|
|
case 85:
|
|
clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85;
|
|
break;
|
|
case 90:
|
|
clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90;
|
|
break;
|
|
case 100:
|
|
clk_out->clk_output_cfg0 |=
|
|
VC5_CLK_OUTPUT_CFG0_SLEW_100;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vc5_get_output_config(struct i2c_client *client,
|
|
struct vc5_out_data *clk_out)
|
|
{
|
|
struct device_node *np_output;
|
|
char *child_name;
|
|
int ret = 0;
|
|
|
|
child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1);
|
|
if (!child_name)
|
|
return -ENOMEM;
|
|
|
|
np_output = of_get_child_by_name(client->dev.of_node, child_name);
|
|
kfree(child_name);
|
|
if (!np_output)
|
|
return 0;
|
|
|
|
ret = vc5_update_mode(np_output, clk_out);
|
|
if (ret)
|
|
goto output_error;
|
|
|
|
ret = vc5_update_power(np_output, clk_out);
|
|
if (ret)
|
|
goto output_error;
|
|
|
|
ret = vc5_update_slew(np_output, clk_out);
|
|
|
|
output_error:
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Invalid clock output configuration OUT%d\n",
|
|
clk_out->num + 1);
|
|
}
|
|
|
|
of_node_put(np_output);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id clk_vc5_of_match[];
|
|
|
|
static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct vc5_driver_data *vc5;
|
|
struct clk_init_data init;
|
|
const char *parent_names[2];
|
|
unsigned int n, idx = 0;
|
|
int ret;
|
|
|
|
vc5 = devm_kzalloc(&client->dev, sizeof(*vc5), GFP_KERNEL);
|
|
if (!vc5)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, vc5);
|
|
vc5->client = client;
|
|
vc5->chip_info = of_device_get_match_data(&client->dev);
|
|
|
|
vc5->pin_xin = devm_clk_get(&client->dev, "xin");
|
|
if (PTR_ERR(vc5->pin_xin) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
vc5->pin_clkin = devm_clk_get(&client->dev, "clkin");
|
|
if (PTR_ERR(vc5->pin_clkin) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
vc5->regmap = devm_regmap_init_i2c(client, &vc5_regmap_config);
|
|
if (IS_ERR(vc5->regmap)) {
|
|
dev_err(&client->dev, "failed to allocate register map\n");
|
|
return PTR_ERR(vc5->regmap);
|
|
}
|
|
|
|
/* Register clock input mux */
|
|
memset(&init, 0, sizeof(init));
|
|
|
|
if (!IS_ERR(vc5->pin_xin)) {
|
|
vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
|
|
parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
|
|
} else if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) {
|
|
vc5->pin_xin = clk_register_fixed_rate(&client->dev,
|
|
"internal-xtal", NULL,
|
|
0, 25000000);
|
|
if (IS_ERR(vc5->pin_xin))
|
|
return PTR_ERR(vc5->pin_xin);
|
|
vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
|
|
parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
|
|
}
|
|
|
|
if (!IS_ERR(vc5->pin_clkin)) {
|
|
vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN;
|
|
parent_names[init.num_parents++] =
|
|
__clk_get_name(vc5->pin_clkin);
|
|
}
|
|
|
|
if (!init.num_parents) {
|
|
dev_err(&client->dev, "no input clock specified!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
init.name = kasprintf(GFP_KERNEL, "%pOFn.mux", client->dev.of_node);
|
|
init.ops = &vc5_mux_ops;
|
|
init.flags = 0;
|
|
init.parent_names = parent_names;
|
|
vc5->clk_mux.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux);
|
|
if (ret)
|
|
goto err_clk_register;
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
|
|
if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) {
|
|
/* Register frequency doubler */
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = kasprintf(GFP_KERNEL, "%pOFn.dbl",
|
|
client->dev.of_node);
|
|
init.ops = &vc5_dbl_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
|
|
init.num_parents = 1;
|
|
vc5->clk_mul.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul);
|
|
if (ret)
|
|
goto err_clk_register;
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
}
|
|
|
|
/* Register PFD */
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = kasprintf(GFP_KERNEL, "%pOFn.pfd", client->dev.of_node);
|
|
init.ops = &vc5_pfd_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL)
|
|
parent_names[0] = clk_hw_get_name(&vc5->clk_mul);
|
|
else
|
|
parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
|
|
init.num_parents = 1;
|
|
vc5->clk_pfd.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd);
|
|
if (ret)
|
|
goto err_clk_register;
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
|
|
/* Register PLL */
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = kasprintf(GFP_KERNEL, "%pOFn.pll", client->dev.of_node);
|
|
init.ops = &vc5_pll_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
parent_names[0] = clk_hw_get_name(&vc5->clk_pfd);
|
|
init.num_parents = 1;
|
|
vc5->clk_pll.num = 0;
|
|
vc5->clk_pll.vc5 = vc5;
|
|
vc5->clk_pll.hw.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw);
|
|
if (ret)
|
|
goto err_clk_register;
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
|
|
/* Register FODs */
|
|
for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
|
|
idx = vc5_map_index_to_output(vc5->chip_info->model, n);
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = kasprintf(GFP_KERNEL, "%pOFn.fod%d",
|
|
client->dev.of_node, idx);
|
|
init.ops = &vc5_fod_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
parent_names[0] = clk_hw_get_name(&vc5->clk_pll.hw);
|
|
init.num_parents = 1;
|
|
vc5->clk_fod[n].num = idx;
|
|
vc5->clk_fod[n].vc5 = vc5;
|
|
vc5->clk_fod[n].hw.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw);
|
|
if (ret)
|
|
goto err_clk_register;
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
}
|
|
|
|
/* Register MUX-connected OUT0_I2C_SELB output */
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = kasprintf(GFP_KERNEL, "%pOFn.out0_sel_i2cb",
|
|
client->dev.of_node);
|
|
init.ops = &vc5_clk_out_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
|
|
init.num_parents = 1;
|
|
vc5->clk_out[0].num = idx;
|
|
vc5->clk_out[0].vc5 = vc5;
|
|
vc5->clk_out[0].hw.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw);
|
|
if (ret)
|
|
goto err_clk_register;
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
|
|
/* Register FOD-connected OUTx outputs */
|
|
for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
|
|
idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1);
|
|
parent_names[0] = clk_hw_get_name(&vc5->clk_fod[idx].hw);
|
|
if (n == 1)
|
|
parent_names[1] = clk_hw_get_name(&vc5->clk_mux);
|
|
else
|
|
parent_names[1] =
|
|
clk_hw_get_name(&vc5->clk_out[n - 1].hw);
|
|
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = kasprintf(GFP_KERNEL, "%pOFn.out%d",
|
|
client->dev.of_node, idx + 1);
|
|
init.ops = &vc5_clk_out_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
init.num_parents = 2;
|
|
vc5->clk_out[n].num = idx;
|
|
vc5->clk_out[n].vc5 = vc5;
|
|
vc5->clk_out[n].hw.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[n].hw);
|
|
if (ret)
|
|
goto err_clk_register;
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
|
|
/* Fetch Clock Output configuration from DT (if specified) */
|
|
ret = vc5_get_output_config(client, &vc5->clk_out[n]);
|
|
if (ret)
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to add clk provider\n");
|
|
goto err_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clk_register:
|
|
dev_err(&client->dev, "unable to register %s\n", init.name);
|
|
kfree(init.name); /* clock framework made a copy of the name */
|
|
err_clk:
|
|
if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)
|
|
clk_unregister_fixed_rate(vc5->pin_xin);
|
|
return ret;
|
|
}
|
|
|
|
static int vc5_remove(struct i2c_client *client)
|
|
{
|
|
struct vc5_driver_data *vc5 = i2c_get_clientdata(client);
|
|
|
|
of_clk_del_provider(client->dev.of_node);
|
|
|
|
if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)
|
|
clk_unregister_fixed_rate(vc5->pin_xin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused vc5_suspend(struct device *dev)
|
|
{
|
|
struct vc5_driver_data *vc5 = dev_get_drvdata(dev);
|
|
|
|
regcache_cache_only(vc5->regmap, true);
|
|
regcache_mark_dirty(vc5->regmap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused vc5_resume(struct device *dev)
|
|
{
|
|
struct vc5_driver_data *vc5 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
regcache_cache_only(vc5->regmap, false);
|
|
ret = regcache_sync(vc5->regmap);
|
|
if (ret)
|
|
dev_err(dev, "Failed to restore register map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct vc5_chip_info idt_5p49v5923_info = {
|
|
.model = IDT_VC5_5P49V5923,
|
|
.clk_fod_cnt = 2,
|
|
.clk_out_cnt = 3,
|
|
.flags = 0,
|
|
};
|
|
|
|
static const struct vc5_chip_info idt_5p49v5925_info = {
|
|
.model = IDT_VC5_5P49V5925,
|
|
.clk_fod_cnt = 4,
|
|
.clk_out_cnt = 5,
|
|
.flags = 0,
|
|
};
|
|
|
|
static const struct vc5_chip_info idt_5p49v5933_info = {
|
|
.model = IDT_VC5_5P49V5933,
|
|
.clk_fod_cnt = 2,
|
|
.clk_out_cnt = 3,
|
|
.flags = VC5_HAS_INTERNAL_XTAL,
|
|
};
|
|
|
|
static const struct vc5_chip_info idt_5p49v5935_info = {
|
|
.model = IDT_VC5_5P49V5935,
|
|
.clk_fod_cnt = 4,
|
|
.clk_out_cnt = 5,
|
|
.flags = VC5_HAS_INTERNAL_XTAL,
|
|
};
|
|
|
|
static const struct vc5_chip_info idt_5p49v6901_info = {
|
|
.model = IDT_VC6_5P49V6901,
|
|
.clk_fod_cnt = 4,
|
|
.clk_out_cnt = 5,
|
|
.flags = VC5_HAS_PFD_FREQ_DBL,
|
|
};
|
|
|
|
static const struct vc5_chip_info idt_5p49v6965_info = {
|
|
.model = IDT_VC6_5P49V6965,
|
|
.clk_fod_cnt = 4,
|
|
.clk_out_cnt = 5,
|
|
.flags = 0,
|
|
};
|
|
|
|
static const struct i2c_device_id vc5_id[] = {
|
|
{ "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
|
|
{ "5p49v5925", .driver_data = IDT_VC5_5P49V5925 },
|
|
{ "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
|
|
{ "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
|
|
{ "5p49v6901", .driver_data = IDT_VC6_5P49V6901 },
|
|
{ "5p49v6965", .driver_data = IDT_VC6_5P49V6965 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, vc5_id);
|
|
|
|
static const struct of_device_id clk_vc5_of_match[] = {
|
|
{ .compatible = "idt,5p49v5923", .data = &idt_5p49v5923_info },
|
|
{ .compatible = "idt,5p49v5925", .data = &idt_5p49v5925_info },
|
|
{ .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
|
|
{ .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
|
|
{ .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info },
|
|
{ .compatible = "idt,5p49v6965", .data = &idt_5p49v6965_info },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, clk_vc5_of_match);
|
|
|
|
static SIMPLE_DEV_PM_OPS(vc5_pm_ops, vc5_suspend, vc5_resume);
|
|
|
|
static struct i2c_driver vc5_driver = {
|
|
.driver = {
|
|
.name = "vc5",
|
|
.pm = &vc5_pm_ops,
|
|
.of_match_table = clk_vc5_of_match,
|
|
},
|
|
.probe = vc5_probe,
|
|
.remove = vc5_remove,
|
|
.id_table = vc5_id,
|
|
};
|
|
module_i2c_driver(vc5_driver);
|
|
|
|
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
|
|
MODULE_DESCRIPTION("IDT VersaClock 5 driver");
|
|
MODULE_LICENSE("GPL");
|