forked from Minki/linux
277ab5abc6
When we're disabling the HDMI link we try to reset the scrambling and TMDS bit clock ratio back to the default values. This will fail if the sink has already been disconnected. Thus we should not print an error message when resetting the scrambling/TMDS bit clock ratio fail during disable. During enable we do want the error, and during disable we may still want to know what happended for debug purposes so let's use DRM_DEBUG_KMS() there. v2: Remember them consts v3: Go back to just one function and print the errors/debugs from callers (Shashank) Cc: Shashank Sharma <shashank.sharma@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105644 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105655 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322154707.22103-1-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2437 lines
70 KiB
C
2437 lines
70 KiB
C
/*
|
|
* Copyright 2006 Dave Airlie <airlied@linux.ie>
|
|
* Copyright © 2006-2009 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eric Anholt <eric@anholt.net>
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hdmi.h>
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drm_hdcp.h>
|
|
#include <drm/drm_scdc_helper.h>
|
|
#include "intel_drv.h"
|
|
#include <drm/i915_drm.h>
|
|
#include <drm/intel_lpe_audio.h>
|
|
#include "i915_drv.h"
|
|
|
|
static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
|
|
{
|
|
return hdmi_to_dig_port(intel_hdmi)->base.base.dev;
|
|
}
|
|
|
|
static void
|
|
assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
|
|
{
|
|
struct drm_device *dev = intel_hdmi_to_dev(intel_hdmi);
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
uint32_t enabled_bits;
|
|
|
|
enabled_bits = HAS_DDI(dev_priv) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
|
|
|
|
WARN(I915_READ(intel_hdmi->hdmi_reg) & enabled_bits,
|
|
"HDMI port enabled, expecting disabled\n");
|
|
}
|
|
|
|
struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder)
|
|
{
|
|
struct intel_digital_port *intel_dig_port =
|
|
container_of(encoder, struct intel_digital_port, base.base);
|
|
return &intel_dig_port->hdmi;
|
|
}
|
|
|
|
static struct intel_hdmi *intel_attached_hdmi(struct drm_connector *connector)
|
|
{
|
|
return enc_to_intel_hdmi(&intel_attached_encoder(connector)->base);
|
|
}
|
|
|
|
static u32 g4x_infoframe_index(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case HDMI_INFOFRAME_TYPE_AVI:
|
|
return VIDEO_DIP_SELECT_AVI;
|
|
case HDMI_INFOFRAME_TYPE_SPD:
|
|
return VIDEO_DIP_SELECT_SPD;
|
|
case HDMI_INFOFRAME_TYPE_VENDOR:
|
|
return VIDEO_DIP_SELECT_VENDOR;
|
|
default:
|
|
MISSING_CASE(type);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static u32 g4x_infoframe_enable(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case HDMI_INFOFRAME_TYPE_AVI:
|
|
return VIDEO_DIP_ENABLE_AVI;
|
|
case HDMI_INFOFRAME_TYPE_SPD:
|
|
return VIDEO_DIP_ENABLE_SPD;
|
|
case HDMI_INFOFRAME_TYPE_VENDOR:
|
|
return VIDEO_DIP_ENABLE_VENDOR;
|
|
default:
|
|
MISSING_CASE(type);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static u32 hsw_infoframe_enable(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case DP_SDP_VSC:
|
|
return VIDEO_DIP_ENABLE_VSC_HSW;
|
|
case HDMI_INFOFRAME_TYPE_AVI:
|
|
return VIDEO_DIP_ENABLE_AVI_HSW;
|
|
case HDMI_INFOFRAME_TYPE_SPD:
|
|
return VIDEO_DIP_ENABLE_SPD_HSW;
|
|
case HDMI_INFOFRAME_TYPE_VENDOR:
|
|
return VIDEO_DIP_ENABLE_VS_HSW;
|
|
default:
|
|
MISSING_CASE(type);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static i915_reg_t
|
|
hsw_dip_data_reg(struct drm_i915_private *dev_priv,
|
|
enum transcoder cpu_transcoder,
|
|
unsigned int type,
|
|
int i)
|
|
{
|
|
switch (type) {
|
|
case DP_SDP_VSC:
|
|
return HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder, i);
|
|
case HDMI_INFOFRAME_TYPE_AVI:
|
|
return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder, i);
|
|
case HDMI_INFOFRAME_TYPE_SPD:
|
|
return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder, i);
|
|
case HDMI_INFOFRAME_TYPE_VENDOR:
|
|
return HSW_TVIDEO_DIP_VS_DATA(cpu_transcoder, i);
|
|
default:
|
|
MISSING_CASE(type);
|
|
return INVALID_MMIO_REG;
|
|
}
|
|
}
|
|
|
|
static void g4x_write_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
unsigned int type,
|
|
const void *frame, ssize_t len)
|
|
{
|
|
const uint32_t *data = frame;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
u32 val = I915_READ(VIDEO_DIP_CTL);
|
|
int i;
|
|
|
|
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
|
|
|
|
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
|
|
val |= g4x_infoframe_index(type);
|
|
|
|
val &= ~g4x_infoframe_enable(type);
|
|
|
|
I915_WRITE(VIDEO_DIP_CTL, val);
|
|
|
|
mmiowb();
|
|
for (i = 0; i < len; i += 4) {
|
|
I915_WRITE(VIDEO_DIP_DATA, *data);
|
|
data++;
|
|
}
|
|
/* Write every possible data byte to force correct ECC calculation. */
|
|
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
|
|
I915_WRITE(VIDEO_DIP_DATA, 0);
|
|
mmiowb();
|
|
|
|
val |= g4x_infoframe_enable(type);
|
|
val &= ~VIDEO_DIP_FREQ_MASK;
|
|
val |= VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
I915_WRITE(VIDEO_DIP_CTL, val);
|
|
POSTING_READ(VIDEO_DIP_CTL);
|
|
}
|
|
|
|
static bool g4x_infoframe_enabled(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
|
|
u32 val = I915_READ(VIDEO_DIP_CTL);
|
|
|
|
if ((val & VIDEO_DIP_ENABLE) == 0)
|
|
return false;
|
|
|
|
if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(intel_dig_port->base.port))
|
|
return false;
|
|
|
|
return val & (VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD);
|
|
}
|
|
|
|
static void ibx_write_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
unsigned int type,
|
|
const void *frame, ssize_t len)
|
|
{
|
|
const uint32_t *data = frame;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
|
|
u32 val = I915_READ(reg);
|
|
int i;
|
|
|
|
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
|
|
|
|
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
|
|
val |= g4x_infoframe_index(type);
|
|
|
|
val &= ~g4x_infoframe_enable(type);
|
|
|
|
I915_WRITE(reg, val);
|
|
|
|
mmiowb();
|
|
for (i = 0; i < len; i += 4) {
|
|
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
|
|
data++;
|
|
}
|
|
/* Write every possible data byte to force correct ECC calculation. */
|
|
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
|
|
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
|
|
mmiowb();
|
|
|
|
val |= g4x_infoframe_enable(type);
|
|
val &= ~VIDEO_DIP_FREQ_MASK;
|
|
val |= VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
static bool ibx_infoframe_enabled(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
|
|
enum pipe pipe = to_intel_crtc(pipe_config->base.crtc)->pipe;
|
|
i915_reg_t reg = TVIDEO_DIP_CTL(pipe);
|
|
u32 val = I915_READ(reg);
|
|
|
|
if ((val & VIDEO_DIP_ENABLE) == 0)
|
|
return false;
|
|
|
|
if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(intel_dig_port->base.port))
|
|
return false;
|
|
|
|
return val & (VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
}
|
|
|
|
static void cpt_write_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
unsigned int type,
|
|
const void *frame, ssize_t len)
|
|
{
|
|
const uint32_t *data = frame;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
|
|
u32 val = I915_READ(reg);
|
|
int i;
|
|
|
|
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
|
|
|
|
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
|
|
val |= g4x_infoframe_index(type);
|
|
|
|
/* The DIP control register spec says that we need to update the AVI
|
|
* infoframe without clearing its enable bit */
|
|
if (type != HDMI_INFOFRAME_TYPE_AVI)
|
|
val &= ~g4x_infoframe_enable(type);
|
|
|
|
I915_WRITE(reg, val);
|
|
|
|
mmiowb();
|
|
for (i = 0; i < len; i += 4) {
|
|
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
|
|
data++;
|
|
}
|
|
/* Write every possible data byte to force correct ECC calculation. */
|
|
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
|
|
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
|
|
mmiowb();
|
|
|
|
val |= g4x_infoframe_enable(type);
|
|
val &= ~VIDEO_DIP_FREQ_MASK;
|
|
val |= VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
static bool cpt_infoframe_enabled(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
enum pipe pipe = to_intel_crtc(pipe_config->base.crtc)->pipe;
|
|
u32 val = I915_READ(TVIDEO_DIP_CTL(pipe));
|
|
|
|
if ((val & VIDEO_DIP_ENABLE) == 0)
|
|
return false;
|
|
|
|
return val & (VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
}
|
|
|
|
static void vlv_write_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
unsigned int type,
|
|
const void *frame, ssize_t len)
|
|
{
|
|
const uint32_t *data = frame;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
i915_reg_t reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
|
|
u32 val = I915_READ(reg);
|
|
int i;
|
|
|
|
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
|
|
|
|
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
|
|
val |= g4x_infoframe_index(type);
|
|
|
|
val &= ~g4x_infoframe_enable(type);
|
|
|
|
I915_WRITE(reg, val);
|
|
|
|
mmiowb();
|
|
for (i = 0; i < len; i += 4) {
|
|
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
|
|
data++;
|
|
}
|
|
/* Write every possible data byte to force correct ECC calculation. */
|
|
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
|
|
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
|
|
mmiowb();
|
|
|
|
val |= g4x_infoframe_enable(type);
|
|
val &= ~VIDEO_DIP_FREQ_MASK;
|
|
val |= VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
static bool vlv_infoframe_enabled(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
|
|
enum pipe pipe = to_intel_crtc(pipe_config->base.crtc)->pipe;
|
|
u32 val = I915_READ(VLV_TVIDEO_DIP_CTL(pipe));
|
|
|
|
if ((val & VIDEO_DIP_ENABLE) == 0)
|
|
return false;
|
|
|
|
if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(intel_dig_port->base.port))
|
|
return false;
|
|
|
|
return val & (VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
}
|
|
|
|
static void hsw_write_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
unsigned int type,
|
|
const void *frame, ssize_t len)
|
|
{
|
|
const uint32_t *data = frame;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
|
|
i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
|
|
i915_reg_t data_reg;
|
|
int data_size = type == DP_SDP_VSC ?
|
|
VIDEO_DIP_VSC_DATA_SIZE : VIDEO_DIP_DATA_SIZE;
|
|
int i;
|
|
u32 val = I915_READ(ctl_reg);
|
|
|
|
data_reg = hsw_dip_data_reg(dev_priv, cpu_transcoder, type, 0);
|
|
|
|
val &= ~hsw_infoframe_enable(type);
|
|
I915_WRITE(ctl_reg, val);
|
|
|
|
mmiowb();
|
|
for (i = 0; i < len; i += 4) {
|
|
I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder,
|
|
type, i >> 2), *data);
|
|
data++;
|
|
}
|
|
/* Write every possible data byte to force correct ECC calculation. */
|
|
for (; i < data_size; i += 4)
|
|
I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder,
|
|
type, i >> 2), 0);
|
|
mmiowb();
|
|
|
|
val |= hsw_infoframe_enable(type);
|
|
I915_WRITE(ctl_reg, val);
|
|
POSTING_READ(ctl_reg);
|
|
}
|
|
|
|
static bool hsw_infoframe_enabled(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
u32 val = I915_READ(HSW_TVIDEO_DIP_CTL(pipe_config->cpu_transcoder));
|
|
|
|
return val & (VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW |
|
|
VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW |
|
|
VIDEO_DIP_ENABLE_GMP_HSW | VIDEO_DIP_ENABLE_SPD_HSW);
|
|
}
|
|
|
|
/*
|
|
* The data we write to the DIP data buffer registers is 1 byte bigger than the
|
|
* HDMI infoframe size because of an ECC/reserved byte at position 3 (starting
|
|
* at 0). It's also a byte used by DisplayPort so the same DIP registers can be
|
|
* used for both technologies.
|
|
*
|
|
* DW0: Reserved/ECC/DP | HB2 | HB1 | HB0
|
|
* DW1: DB3 | DB2 | DB1 | DB0
|
|
* DW2: DB7 | DB6 | DB5 | DB4
|
|
* DW3: ...
|
|
*
|
|
* (HB is Header Byte, DB is Data Byte)
|
|
*
|
|
* The hdmi pack() functions don't know about that hardware specific hole so we
|
|
* trick them by giving an offset into the buffer and moving back the header
|
|
* bytes by one.
|
|
*/
|
|
static void intel_write_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
union hdmi_infoframe *frame)
|
|
{
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
|
|
uint8_t buffer[VIDEO_DIP_DATA_SIZE];
|
|
ssize_t len;
|
|
|
|
/* see comment above for the reason for this offset */
|
|
len = hdmi_infoframe_pack(frame, buffer + 1, sizeof(buffer) - 1);
|
|
if (len < 0)
|
|
return;
|
|
|
|
/* Insert the 'hole' (see big comment above) at position 3 */
|
|
buffer[0] = buffer[1];
|
|
buffer[1] = buffer[2];
|
|
buffer[2] = buffer[3];
|
|
buffer[3] = 0;
|
|
len++;
|
|
|
|
intel_dig_port->write_infoframe(encoder, crtc_state, frame->any.type, buffer, len);
|
|
}
|
|
|
|
static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&crtc_state->base.adjusted_mode;
|
|
struct drm_connector *connector = &intel_hdmi->attached_connector->base;
|
|
bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
|
|
union hdmi_infoframe frame;
|
|
int ret;
|
|
|
|
ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
|
|
adjusted_mode,
|
|
is_hdmi2_sink);
|
|
if (ret < 0) {
|
|
DRM_ERROR("couldn't fill AVI infoframe\n");
|
|
return;
|
|
}
|
|
|
|
if (crtc_state->ycbcr420)
|
|
frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
|
|
else
|
|
frame.avi.colorspace = HDMI_COLORSPACE_RGB;
|
|
|
|
drm_hdmi_avi_infoframe_quant_range(&frame.avi, adjusted_mode,
|
|
crtc_state->limited_color_range ?
|
|
HDMI_QUANTIZATION_RANGE_LIMITED :
|
|
HDMI_QUANTIZATION_RANGE_FULL,
|
|
intel_hdmi->rgb_quant_range_selectable,
|
|
is_hdmi2_sink);
|
|
|
|
/* TODO: handle pixel repetition for YCBCR420 outputs */
|
|
intel_write_infoframe(encoder, crtc_state, &frame);
|
|
}
|
|
|
|
static void intel_hdmi_set_spd_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
union hdmi_infoframe frame;
|
|
int ret;
|
|
|
|
ret = hdmi_spd_infoframe_init(&frame.spd, "Intel", "Integrated gfx");
|
|
if (ret < 0) {
|
|
DRM_ERROR("couldn't fill SPD infoframe\n");
|
|
return;
|
|
}
|
|
|
|
frame.spd.sdi = HDMI_SPD_SDI_PC;
|
|
|
|
intel_write_infoframe(encoder, crtc_state, &frame);
|
|
}
|
|
|
|
static void
|
|
intel_hdmi_set_hdmi_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
union hdmi_infoframe frame;
|
|
int ret;
|
|
|
|
ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
|
|
conn_state->connector,
|
|
&crtc_state->base.adjusted_mode);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
intel_write_infoframe(encoder, crtc_state, &frame);
|
|
}
|
|
|
|
static void g4x_set_infoframes(struct drm_encoder *encoder,
|
|
bool enable,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
|
|
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
|
|
i915_reg_t reg = VIDEO_DIP_CTL;
|
|
u32 val = I915_READ(reg);
|
|
u32 port = VIDEO_DIP_PORT(intel_dig_port->base.port);
|
|
|
|
assert_hdmi_port_disabled(intel_hdmi);
|
|
|
|
/* If the registers were not initialized yet, they might be zeroes,
|
|
* which means we're selecting the AVI DIP and we're setting its
|
|
* frequency to once. This seems to really confuse the HW and make
|
|
* things stop working (the register spec says the AVI always needs to
|
|
* be sent every VSync). So here we avoid writing to the register more
|
|
* than we need and also explicitly select the AVI DIP and explicitly
|
|
* set its frequency to every VSync. Avoiding to write it twice seems to
|
|
* be enough to solve the problem, but being defensive shouldn't hurt us
|
|
* either. */
|
|
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
if (!enable) {
|
|
if (!(val & VIDEO_DIP_ENABLE))
|
|
return;
|
|
if (port != (val & VIDEO_DIP_PORT_MASK)) {
|
|
DRM_DEBUG_KMS("video DIP still enabled on port %c\n",
|
|
(val & VIDEO_DIP_PORT_MASK) >> 29);
|
|
return;
|
|
}
|
|
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD);
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
return;
|
|
}
|
|
|
|
if (port != (val & VIDEO_DIP_PORT_MASK)) {
|
|
if (val & VIDEO_DIP_ENABLE) {
|
|
DRM_DEBUG_KMS("video DIP already enabled on port %c\n",
|
|
(val & VIDEO_DIP_PORT_MASK) >> 29);
|
|
return;
|
|
}
|
|
val &= ~VIDEO_DIP_PORT_MASK;
|
|
val |= port;
|
|
}
|
|
|
|
val |= VIDEO_DIP_ENABLE;
|
|
val &= ~(VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD);
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
|
|
intel_hdmi_set_avi_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
static bool hdmi_sink_is_deep_color(const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_connector *connector = conn_state->connector;
|
|
|
|
/*
|
|
* HDMI cloning is only supported on g4x which doesn't
|
|
* support deep color or GCP infoframes anyway so no
|
|
* need to worry about multiple HDMI sinks here.
|
|
*/
|
|
|
|
return connector->display_info.bpc > 8;
|
|
}
|
|
|
|
/*
|
|
* Determine if default_phase=1 can be indicated in the GCP infoframe.
|
|
*
|
|
* From HDMI specification 1.4a:
|
|
* - The first pixel of each Video Data Period shall always have a pixel packing phase of 0
|
|
* - The first pixel following each Video Data Period shall have a pixel packing phase of 0
|
|
* - The PP bits shall be constant for all GCPs and will be equal to the last packing phase
|
|
* - The first pixel following every transition of HSYNC or VSYNC shall have a pixel packing
|
|
* phase of 0
|
|
*/
|
|
static bool gcp_default_phase_possible(int pipe_bpp,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
unsigned int pixels_per_group;
|
|
|
|
switch (pipe_bpp) {
|
|
case 30:
|
|
/* 4 pixels in 5 clocks */
|
|
pixels_per_group = 4;
|
|
break;
|
|
case 36:
|
|
/* 2 pixels in 3 clocks */
|
|
pixels_per_group = 2;
|
|
break;
|
|
case 48:
|
|
/* 1 pixel in 2 clocks */
|
|
pixels_per_group = 1;
|
|
break;
|
|
default:
|
|
/* phase information not relevant for 8bpc */
|
|
return false;
|
|
}
|
|
|
|
return mode->crtc_hdisplay % pixels_per_group == 0 &&
|
|
mode->crtc_htotal % pixels_per_group == 0 &&
|
|
mode->crtc_hblank_start % pixels_per_group == 0 &&
|
|
mode->crtc_hblank_end % pixels_per_group == 0 &&
|
|
mode->crtc_hsync_start % pixels_per_group == 0 &&
|
|
mode->crtc_hsync_end % pixels_per_group == 0 &&
|
|
((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0 ||
|
|
mode->crtc_htotal/2 % pixels_per_group == 0);
|
|
}
|
|
|
|
static bool intel_hdmi_set_gcp_infoframe(struct drm_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
i915_reg_t reg;
|
|
u32 val = 0;
|
|
|
|
if (HAS_DDI(dev_priv))
|
|
reg = HSW_TVIDEO_DIP_GCP(crtc_state->cpu_transcoder);
|
|
else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
reg = VLV_TVIDEO_DIP_GCP(crtc->pipe);
|
|
else if (HAS_PCH_SPLIT(dev_priv))
|
|
reg = TVIDEO_DIP_GCP(crtc->pipe);
|
|
else
|
|
return false;
|
|
|
|
/* Indicate color depth whenever the sink supports deep color */
|
|
if (hdmi_sink_is_deep_color(conn_state))
|
|
val |= GCP_COLOR_INDICATION;
|
|
|
|
/* Enable default_phase whenever the display mode is suitably aligned */
|
|
if (gcp_default_phase_possible(crtc_state->pipe_bpp,
|
|
&crtc_state->base.adjusted_mode))
|
|
val |= GCP_DEFAULT_PHASE_ENABLE;
|
|
|
|
I915_WRITE(reg, val);
|
|
|
|
return val != 0;
|
|
}
|
|
|
|
static void ibx_set_infoframes(struct drm_encoder *encoder,
|
|
bool enable,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
|
|
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
|
|
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
|
|
u32 val = I915_READ(reg);
|
|
u32 port = VIDEO_DIP_PORT(intel_dig_port->base.port);
|
|
|
|
assert_hdmi_port_disabled(intel_hdmi);
|
|
|
|
/* See the big comment in g4x_set_infoframes() */
|
|
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
if (!enable) {
|
|
if (!(val & VIDEO_DIP_ENABLE))
|
|
return;
|
|
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
return;
|
|
}
|
|
|
|
if (port != (val & VIDEO_DIP_PORT_MASK)) {
|
|
WARN(val & VIDEO_DIP_ENABLE,
|
|
"DIP already enabled on port %c\n",
|
|
(val & VIDEO_DIP_PORT_MASK) >> 29);
|
|
val &= ~VIDEO_DIP_PORT_MASK;
|
|
val |= port;
|
|
}
|
|
|
|
val |= VIDEO_DIP_ENABLE;
|
|
val &= ~(VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
|
|
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
|
|
val |= VIDEO_DIP_ENABLE_GCP;
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
|
|
intel_hdmi_set_avi_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
static void cpt_set_infoframes(struct drm_encoder *encoder,
|
|
bool enable,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
|
|
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
|
|
u32 val = I915_READ(reg);
|
|
|
|
assert_hdmi_port_disabled(intel_hdmi);
|
|
|
|
/* See the big comment in g4x_set_infoframes() */
|
|
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
if (!enable) {
|
|
if (!(val & VIDEO_DIP_ENABLE))
|
|
return;
|
|
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
return;
|
|
}
|
|
|
|
/* Set both together, unset both together: see the spec. */
|
|
val |= VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI;
|
|
val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
|
|
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
|
|
val |= VIDEO_DIP_ENABLE_GCP;
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
|
|
intel_hdmi_set_avi_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
static void vlv_set_infoframes(struct drm_encoder *encoder,
|
|
bool enable,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
|
|
i915_reg_t reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
|
|
u32 val = I915_READ(reg);
|
|
u32 port = VIDEO_DIP_PORT(intel_dig_port->base.port);
|
|
|
|
assert_hdmi_port_disabled(intel_hdmi);
|
|
|
|
/* See the big comment in g4x_set_infoframes() */
|
|
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
|
|
|
|
if (!enable) {
|
|
if (!(val & VIDEO_DIP_ENABLE))
|
|
return;
|
|
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
return;
|
|
}
|
|
|
|
if (port != (val & VIDEO_DIP_PORT_MASK)) {
|
|
WARN(val & VIDEO_DIP_ENABLE,
|
|
"DIP already enabled on port %c\n",
|
|
(val & VIDEO_DIP_PORT_MASK) >> 29);
|
|
val &= ~VIDEO_DIP_PORT_MASK;
|
|
val |= port;
|
|
}
|
|
|
|
val |= VIDEO_DIP_ENABLE;
|
|
val &= ~(VIDEO_DIP_ENABLE_AVI |
|
|
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
|
|
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
|
|
|
|
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
|
|
val |= VIDEO_DIP_ENABLE_GCP;
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
|
|
intel_hdmi_set_avi_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
static void hsw_set_infoframes(struct drm_encoder *encoder,
|
|
bool enable,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
|
|
i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder);
|
|
u32 val = I915_READ(reg);
|
|
|
|
assert_hdmi_port_disabled(intel_hdmi);
|
|
|
|
val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW |
|
|
VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW |
|
|
VIDEO_DIP_ENABLE_GMP_HSW | VIDEO_DIP_ENABLE_SPD_HSW);
|
|
|
|
if (!enable) {
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
return;
|
|
}
|
|
|
|
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
|
|
val |= VIDEO_DIP_ENABLE_GCP_HSW;
|
|
|
|
I915_WRITE(reg, val);
|
|
POSTING_READ(reg);
|
|
|
|
intel_hdmi_set_avi_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
|
|
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
|
|
struct i2c_adapter *adapter =
|
|
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
|
|
|
|
if (hdmi->dp_dual_mode.type < DRM_DP_DUAL_MODE_TYPE2_DVI)
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("%s DP dual mode adaptor TMDS output\n",
|
|
enable ? "Enabling" : "Disabling");
|
|
|
|
drm_dp_dual_mode_set_tmds_output(hdmi->dp_dual_mode.type,
|
|
adapter, enable);
|
|
}
|
|
|
|
static int intel_hdmi_hdcp_read(struct intel_digital_port *intel_dig_port,
|
|
unsigned int offset, void *buffer, size_t size)
|
|
{
|
|
struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
|
|
struct drm_i915_private *dev_priv =
|
|
intel_dig_port->base.base.dev->dev_private;
|
|
struct i2c_adapter *adapter = intel_gmbus_get_adapter(dev_priv,
|
|
hdmi->ddc_bus);
|
|
int ret;
|
|
u8 start = offset & 0xff;
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = DRM_HDCP_DDC_ADDR,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = &start,
|
|
},
|
|
{
|
|
.addr = DRM_HDCP_DDC_ADDR,
|
|
.flags = I2C_M_RD,
|
|
.len = size,
|
|
.buf = buffer
|
|
}
|
|
};
|
|
ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret == ARRAY_SIZE(msgs))
|
|
return 0;
|
|
return ret >= 0 ? -EIO : ret;
|
|
}
|
|
|
|
static int intel_hdmi_hdcp_write(struct intel_digital_port *intel_dig_port,
|
|
unsigned int offset, void *buffer, size_t size)
|
|
{
|
|
struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
|
|
struct drm_i915_private *dev_priv =
|
|
intel_dig_port->base.base.dev->dev_private;
|
|
struct i2c_adapter *adapter = intel_gmbus_get_adapter(dev_priv,
|
|
hdmi->ddc_bus);
|
|
int ret;
|
|
u8 *write_buf;
|
|
struct i2c_msg msg;
|
|
|
|
write_buf = kzalloc(size + 1, GFP_KERNEL);
|
|
if (!write_buf)
|
|
return -ENOMEM;
|
|
|
|
write_buf[0] = offset & 0xff;
|
|
memcpy(&write_buf[1], buffer, size);
|
|
|
|
msg.addr = DRM_HDCP_DDC_ADDR;
|
|
msg.flags = 0,
|
|
msg.len = size + 1,
|
|
msg.buf = write_buf;
|
|
|
|
ret = i2c_transfer(adapter, &msg, 1);
|
|
if (ret == 1)
|
|
return 0;
|
|
return ret >= 0 ? -EIO : ret;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
|
|
u8 *an)
|
|
{
|
|
struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
|
|
struct drm_i915_private *dev_priv =
|
|
intel_dig_port->base.base.dev->dev_private;
|
|
struct i2c_adapter *adapter = intel_gmbus_get_adapter(dev_priv,
|
|
hdmi->ddc_bus);
|
|
int ret;
|
|
|
|
ret = intel_hdmi_hdcp_write(intel_dig_port, DRM_HDCP_DDC_AN, an,
|
|
DRM_HDCP_AN_LEN);
|
|
if (ret) {
|
|
DRM_ERROR("Write An over DDC failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = intel_gmbus_output_aksv(adapter);
|
|
if (ret < 0) {
|
|
DRM_ERROR("Failed to output aksv (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int intel_hdmi_hdcp_read_bksv(struct intel_digital_port *intel_dig_port,
|
|
u8 *bksv)
|
|
{
|
|
int ret;
|
|
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BKSV, bksv,
|
|
DRM_HDCP_KSV_LEN);
|
|
if (ret)
|
|
DRM_ERROR("Read Bksv over DDC failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_read_bstatus(struct intel_digital_port *intel_dig_port,
|
|
u8 *bstatus)
|
|
{
|
|
int ret;
|
|
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BSTATUS,
|
|
bstatus, DRM_HDCP_BSTATUS_LEN);
|
|
if (ret)
|
|
DRM_ERROR("Read bstatus over DDC failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_repeater_present(struct intel_digital_port *intel_dig_port,
|
|
bool *repeater_present)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BCAPS, &val, 1);
|
|
if (ret) {
|
|
DRM_ERROR("Read bcaps over DDC failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
*repeater_present = val & DRM_HDCP_DDC_BCAPS_REPEATER_PRESENT;
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_read_ri_prime(struct intel_digital_port *intel_dig_port,
|
|
u8 *ri_prime)
|
|
{
|
|
int ret;
|
|
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_RI_PRIME,
|
|
ri_prime, DRM_HDCP_RI_LEN);
|
|
if (ret)
|
|
DRM_ERROR("Read Ri' over DDC failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_read_ksv_ready(struct intel_digital_port *intel_dig_port,
|
|
bool *ksv_ready)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BCAPS, &val, 1);
|
|
if (ret) {
|
|
DRM_ERROR("Read bcaps over DDC failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
*ksv_ready = val & DRM_HDCP_DDC_BCAPS_KSV_FIFO_READY;
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_read_ksv_fifo(struct intel_digital_port *intel_dig_port,
|
|
int num_downstream, u8 *ksv_fifo)
|
|
{
|
|
int ret;
|
|
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_KSV_FIFO,
|
|
ksv_fifo, num_downstream * DRM_HDCP_KSV_LEN);
|
|
if (ret) {
|
|
DRM_ERROR("Read ksv fifo over DDC failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_read_v_prime_part(struct intel_digital_port *intel_dig_port,
|
|
int i, u32 *part)
|
|
{
|
|
int ret;
|
|
|
|
if (i >= DRM_HDCP_V_PRIME_NUM_PARTS)
|
|
return -EINVAL;
|
|
|
|
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_V_PRIME(i),
|
|
part, DRM_HDCP_V_PRIME_PART_LEN);
|
|
if (ret)
|
|
DRM_ERROR("Read V'[%d] over DDC failed (%d)\n", i, ret);
|
|
return ret;
|
|
}
|
|
|
|
static
|
|
int intel_hdmi_hdcp_toggle_signalling(struct intel_digital_port *intel_dig_port,
|
|
bool enable)
|
|
{
|
|
int ret;
|
|
|
|
if (!enable)
|
|
usleep_range(6, 60); /* Bspec says >= 6us */
|
|
|
|
ret = intel_ddi_toggle_hdcp_signalling(&intel_dig_port->base, enable);
|
|
if (ret) {
|
|
DRM_ERROR("%s HDCP signalling failed (%d)\n",
|
|
enable ? "Enable" : "Disable", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
bool intel_hdmi_hdcp_check_link(struct intel_digital_port *intel_dig_port)
|
|
{
|
|
struct drm_i915_private *dev_priv =
|
|
intel_dig_port->base.base.dev->dev_private;
|
|
enum port port = intel_dig_port->base.port;
|
|
int ret;
|
|
union {
|
|
u32 reg;
|
|
u8 shim[DRM_HDCP_RI_LEN];
|
|
} ri;
|
|
|
|
ret = intel_hdmi_hdcp_read_ri_prime(intel_dig_port, ri.shim);
|
|
if (ret)
|
|
return false;
|
|
|
|
I915_WRITE(PORT_HDCP_RPRIME(port), ri.reg);
|
|
|
|
/* Wait for Ri prime match */
|
|
if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) &
|
|
(HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) {
|
|
DRM_ERROR("Ri' mismatch detected, link check failed (%x)\n",
|
|
I915_READ(PORT_HDCP_STATUS(port)));
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static const struct intel_hdcp_shim intel_hdmi_hdcp_shim = {
|
|
.write_an_aksv = intel_hdmi_hdcp_write_an_aksv,
|
|
.read_bksv = intel_hdmi_hdcp_read_bksv,
|
|
.read_bstatus = intel_hdmi_hdcp_read_bstatus,
|
|
.repeater_present = intel_hdmi_hdcp_repeater_present,
|
|
.read_ri_prime = intel_hdmi_hdcp_read_ri_prime,
|
|
.read_ksv_ready = intel_hdmi_hdcp_read_ksv_ready,
|
|
.read_ksv_fifo = intel_hdmi_hdcp_read_ksv_fifo,
|
|
.read_v_prime_part = intel_hdmi_hdcp_read_v_prime_part,
|
|
.toggle_signalling = intel_hdmi_hdcp_toggle_signalling,
|
|
.check_link = intel_hdmi_hdcp_check_link,
|
|
};
|
|
|
|
static void intel_hdmi_prepare(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
|
|
u32 hdmi_val;
|
|
|
|
intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
|
|
|
|
hdmi_val = SDVO_ENCODING_HDMI;
|
|
if (!HAS_PCH_SPLIT(dev_priv) && crtc_state->limited_color_range)
|
|
hdmi_val |= HDMI_COLOR_RANGE_16_235;
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
|
|
hdmi_val |= SDVO_VSYNC_ACTIVE_HIGH;
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
|
|
hdmi_val |= SDVO_HSYNC_ACTIVE_HIGH;
|
|
|
|
if (crtc_state->pipe_bpp > 24)
|
|
hdmi_val |= HDMI_COLOR_FORMAT_12bpc;
|
|
else
|
|
hdmi_val |= SDVO_COLOR_FORMAT_8bpc;
|
|
|
|
if (crtc_state->has_hdmi_sink)
|
|
hdmi_val |= HDMI_MODE_SELECT_HDMI;
|
|
|
|
if (HAS_PCH_CPT(dev_priv))
|
|
hdmi_val |= SDVO_PIPE_SEL_CPT(crtc->pipe);
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
hdmi_val |= SDVO_PIPE_SEL_CHV(crtc->pipe);
|
|
else
|
|
hdmi_val |= SDVO_PIPE_SEL(crtc->pipe);
|
|
|
|
I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
}
|
|
|
|
static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
|
|
enum pipe *pipe)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
u32 tmp;
|
|
bool ret;
|
|
|
|
if (!intel_display_power_get_if_enabled(dev_priv,
|
|
encoder->power_domain))
|
|
return false;
|
|
|
|
ret = false;
|
|
|
|
tmp = I915_READ(intel_hdmi->hdmi_reg);
|
|
|
|
if (!(tmp & SDVO_ENABLE))
|
|
goto out;
|
|
|
|
if (HAS_PCH_CPT(dev_priv))
|
|
*pipe = PORT_TO_PIPE_CPT(tmp);
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
*pipe = SDVO_PORT_TO_PIPE_CHV(tmp);
|
|
else
|
|
*pipe = PORT_TO_PIPE(tmp);
|
|
|
|
ret = true;
|
|
|
|
out:
|
|
intel_display_power_put(dev_priv, encoder->power_domain);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void intel_hdmi_get_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
struct intel_digital_port *intel_dig_port = hdmi_to_dig_port(intel_hdmi);
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
u32 tmp, flags = 0;
|
|
int dotclock;
|
|
|
|
pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
|
|
|
|
tmp = I915_READ(intel_hdmi->hdmi_reg);
|
|
|
|
if (tmp & SDVO_HSYNC_ACTIVE_HIGH)
|
|
flags |= DRM_MODE_FLAG_PHSYNC;
|
|
else
|
|
flags |= DRM_MODE_FLAG_NHSYNC;
|
|
|
|
if (tmp & SDVO_VSYNC_ACTIVE_HIGH)
|
|
flags |= DRM_MODE_FLAG_PVSYNC;
|
|
else
|
|
flags |= DRM_MODE_FLAG_NVSYNC;
|
|
|
|
if (tmp & HDMI_MODE_SELECT_HDMI)
|
|
pipe_config->has_hdmi_sink = true;
|
|
|
|
if (intel_dig_port->infoframe_enabled(&encoder->base, pipe_config))
|
|
pipe_config->has_infoframe = true;
|
|
|
|
if (tmp & SDVO_AUDIO_ENABLE)
|
|
pipe_config->has_audio = true;
|
|
|
|
if (!HAS_PCH_SPLIT(dev_priv) &&
|
|
tmp & HDMI_COLOR_RANGE_16_235)
|
|
pipe_config->limited_color_range = true;
|
|
|
|
pipe_config->base.adjusted_mode.flags |= flags;
|
|
|
|
if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc)
|
|
dotclock = pipe_config->port_clock * 2 / 3;
|
|
else
|
|
dotclock = pipe_config->port_clock;
|
|
|
|
if (pipe_config->pixel_multiplier)
|
|
dotclock /= pipe_config->pixel_multiplier;
|
|
|
|
pipe_config->base.adjusted_mode.crtc_clock = dotclock;
|
|
|
|
pipe_config->lane_count = 4;
|
|
}
|
|
|
|
static void intel_enable_hdmi_audio(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
|
|
|
|
WARN_ON(!pipe_config->has_hdmi_sink);
|
|
DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n",
|
|
pipe_name(crtc->pipe));
|
|
intel_audio_codec_enable(encoder, pipe_config, conn_state);
|
|
}
|
|
|
|
static void g4x_enable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
u32 temp;
|
|
|
|
temp = I915_READ(intel_hdmi->hdmi_reg);
|
|
|
|
temp |= SDVO_ENABLE;
|
|
if (pipe_config->has_audio)
|
|
temp |= SDVO_AUDIO_ENABLE;
|
|
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
if (pipe_config->has_audio)
|
|
intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
|
|
}
|
|
|
|
static void ibx_enable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
u32 temp;
|
|
|
|
temp = I915_READ(intel_hdmi->hdmi_reg);
|
|
|
|
temp |= SDVO_ENABLE;
|
|
if (pipe_config->has_audio)
|
|
temp |= SDVO_AUDIO_ENABLE;
|
|
|
|
/*
|
|
* HW workaround, need to write this twice for issue
|
|
* that may result in first write getting masked.
|
|
*/
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
/*
|
|
* HW workaround, need to toggle enable bit off and on
|
|
* for 12bpc with pixel repeat.
|
|
*
|
|
* FIXME: BSpec says this should be done at the end of
|
|
* of the modeset sequence, so not sure if this isn't too soon.
|
|
*/
|
|
if (pipe_config->pipe_bpp > 24 &&
|
|
pipe_config->pixel_multiplier > 1) {
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp & ~SDVO_ENABLE);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
/*
|
|
* HW workaround, need to write this twice for issue
|
|
* that may result in first write getting masked.
|
|
*/
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
}
|
|
|
|
if (pipe_config->has_audio)
|
|
intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
|
|
}
|
|
|
|
static void cpt_enable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
enum pipe pipe = crtc->pipe;
|
|
u32 temp;
|
|
|
|
temp = I915_READ(intel_hdmi->hdmi_reg);
|
|
|
|
temp |= SDVO_ENABLE;
|
|
if (pipe_config->has_audio)
|
|
temp |= SDVO_AUDIO_ENABLE;
|
|
|
|
/*
|
|
* WaEnableHDMI8bpcBefore12bpc:snb,ivb
|
|
*
|
|
* The procedure for 12bpc is as follows:
|
|
* 1. disable HDMI clock gating
|
|
* 2. enable HDMI with 8bpc
|
|
* 3. enable HDMI with 12bpc
|
|
* 4. enable HDMI clock gating
|
|
*/
|
|
|
|
if (pipe_config->pipe_bpp > 24) {
|
|
I915_WRITE(TRANS_CHICKEN1(pipe),
|
|
I915_READ(TRANS_CHICKEN1(pipe)) |
|
|
TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE);
|
|
|
|
temp &= ~SDVO_COLOR_FORMAT_MASK;
|
|
temp |= SDVO_COLOR_FORMAT_8bpc;
|
|
}
|
|
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
if (pipe_config->pipe_bpp > 24) {
|
|
temp &= ~SDVO_COLOR_FORMAT_MASK;
|
|
temp |= HDMI_COLOR_FORMAT_12bpc;
|
|
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
I915_WRITE(TRANS_CHICKEN1(pipe),
|
|
I915_READ(TRANS_CHICKEN1(pipe)) &
|
|
~TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE);
|
|
}
|
|
|
|
if (pipe_config->has_audio)
|
|
intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
|
|
}
|
|
|
|
static void vlv_enable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
}
|
|
|
|
static void intel_disable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
struct intel_digital_port *intel_dig_port =
|
|
hdmi_to_dig_port(intel_hdmi);
|
|
struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
|
|
u32 temp;
|
|
|
|
temp = I915_READ(intel_hdmi->hdmi_reg);
|
|
|
|
temp &= ~(SDVO_ENABLE | SDVO_AUDIO_ENABLE);
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
/*
|
|
* HW workaround for IBX, we need to move the port
|
|
* to transcoder A after disabling it to allow the
|
|
* matching DP port to be enabled on transcoder A.
|
|
*/
|
|
if (HAS_PCH_IBX(dev_priv) && crtc->pipe == PIPE_B) {
|
|
/*
|
|
* We get CPU/PCH FIFO underruns on the other pipe when
|
|
* doing the workaround. Sweep them under the rug.
|
|
*/
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false);
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
|
|
|
|
temp &= ~SDVO_PIPE_B_SELECT;
|
|
temp |= SDVO_ENABLE;
|
|
/*
|
|
* HW workaround, need to write this twice for issue
|
|
* that may result in first write getting masked.
|
|
*/
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
temp &= ~SDVO_ENABLE;
|
|
I915_WRITE(intel_hdmi->hdmi_reg, temp);
|
|
POSTING_READ(intel_hdmi->hdmi_reg);
|
|
|
|
intel_wait_for_vblank_if_active(dev_priv, PIPE_A);
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true);
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
|
|
}
|
|
|
|
intel_dig_port->set_infoframes(&encoder->base, false,
|
|
old_crtc_state, old_conn_state);
|
|
|
|
intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
|
|
}
|
|
|
|
static void g4x_disable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
if (old_crtc_state->has_audio)
|
|
intel_audio_codec_disable(encoder,
|
|
old_crtc_state, old_conn_state);
|
|
|
|
intel_disable_hdmi(encoder, old_crtc_state, old_conn_state);
|
|
}
|
|
|
|
static void pch_disable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
if (old_crtc_state->has_audio)
|
|
intel_audio_codec_disable(encoder,
|
|
old_crtc_state, old_conn_state);
|
|
}
|
|
|
|
static void pch_post_disable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
intel_disable_hdmi(encoder, old_crtc_state, old_conn_state);
|
|
}
|
|
|
|
static int intel_hdmi_source_max_tmds_clock(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
const struct ddi_vbt_port_info *info =
|
|
&dev_priv->vbt.ddi_port_info[encoder->port];
|
|
int max_tmds_clock;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
|
|
max_tmds_clock = 594000;
|
|
else if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
|
|
max_tmds_clock = 300000;
|
|
else if (INTEL_GEN(dev_priv) >= 5)
|
|
max_tmds_clock = 225000;
|
|
else
|
|
max_tmds_clock = 165000;
|
|
|
|
if (info->max_tmds_clock)
|
|
max_tmds_clock = min(max_tmds_clock, info->max_tmds_clock);
|
|
|
|
return max_tmds_clock;
|
|
}
|
|
|
|
static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,
|
|
bool respect_downstream_limits,
|
|
bool force_dvi)
|
|
{
|
|
struct intel_encoder *encoder = &hdmi_to_dig_port(hdmi)->base;
|
|
int max_tmds_clock = intel_hdmi_source_max_tmds_clock(encoder);
|
|
|
|
if (respect_downstream_limits) {
|
|
struct intel_connector *connector = hdmi->attached_connector;
|
|
const struct drm_display_info *info = &connector->base.display_info;
|
|
|
|
if (hdmi->dp_dual_mode.max_tmds_clock)
|
|
max_tmds_clock = min(max_tmds_clock,
|
|
hdmi->dp_dual_mode.max_tmds_clock);
|
|
|
|
if (info->max_tmds_clock)
|
|
max_tmds_clock = min(max_tmds_clock,
|
|
info->max_tmds_clock);
|
|
else if (!hdmi->has_hdmi_sink || force_dvi)
|
|
max_tmds_clock = min(max_tmds_clock, 165000);
|
|
}
|
|
|
|
return max_tmds_clock;
|
|
}
|
|
|
|
static enum drm_mode_status
|
|
hdmi_port_clock_valid(struct intel_hdmi *hdmi,
|
|
int clock, bool respect_downstream_limits,
|
|
bool force_dvi)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
|
|
|
|
if (clock < 25000)
|
|
return MODE_CLOCK_LOW;
|
|
if (clock > hdmi_port_clock_limit(hdmi, respect_downstream_limits, force_dvi))
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
/* BXT DPLL can't generate 223-240 MHz */
|
|
if (IS_GEN9_LP(dev_priv) && clock > 223333 && clock < 240000)
|
|
return MODE_CLOCK_RANGE;
|
|
|
|
/* CHV DPLL can't generate 216-240 MHz */
|
|
if (IS_CHERRYVIEW(dev_priv) && clock > 216000 && clock < 240000)
|
|
return MODE_CLOCK_RANGE;
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static enum drm_mode_status
|
|
intel_hdmi_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
|
|
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum drm_mode_status status;
|
|
int clock;
|
|
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
|
|
bool force_dvi =
|
|
READ_ONCE(to_intel_digital_connector_state(connector->state)->force_audio) == HDMI_AUDIO_OFF_DVI;
|
|
|
|
clock = mode->clock;
|
|
|
|
if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
|
|
clock *= 2;
|
|
|
|
if (clock > max_dotclk)
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
|
|
clock *= 2;
|
|
|
|
if (drm_mode_is_420_only(&connector->display_info, mode))
|
|
clock /= 2;
|
|
|
|
/* check if we can do 8bpc */
|
|
status = hdmi_port_clock_valid(hdmi, clock, true, force_dvi);
|
|
|
|
/* if we can't do 8bpc we may still be able to do 12bpc */
|
|
if (!HAS_GMCH_DISPLAY(dev_priv) && status != MODE_OK && hdmi->has_hdmi_sink && !force_dvi)
|
|
status = hdmi_port_clock_valid(hdmi, clock * 3 / 2, true, force_dvi);
|
|
|
|
return status;
|
|
}
|
|
|
|
static bool hdmi_12bpc_possible(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv =
|
|
to_i915(crtc_state->base.crtc->dev);
|
|
struct drm_atomic_state *state = crtc_state->base.state;
|
|
struct drm_connector_state *connector_state;
|
|
struct drm_connector *connector;
|
|
int i;
|
|
|
|
if (HAS_GMCH_DISPLAY(dev_priv))
|
|
return false;
|
|
|
|
if (crtc_state->pipe_bpp <= 8*3)
|
|
return false;
|
|
|
|
if (!crtc_state->has_hdmi_sink)
|
|
return false;
|
|
|
|
/*
|
|
* HDMI 12bpc affects the clocks, so it's only possible
|
|
* when not cloning with other encoder types.
|
|
*/
|
|
if (crtc_state->output_types != 1 << INTEL_OUTPUT_HDMI)
|
|
return false;
|
|
|
|
for_each_new_connector_in_state(state, connector, connector_state, i) {
|
|
const struct drm_display_info *info = &connector->display_info;
|
|
|
|
if (connector_state->crtc != crtc_state->base.crtc)
|
|
continue;
|
|
|
|
if (crtc_state->ycbcr420) {
|
|
const struct drm_hdmi_info *hdmi = &info->hdmi;
|
|
|
|
if (!(hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
|
|
return false;
|
|
} else {
|
|
if (!(info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_36))
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/* Display WA #1139: glk */
|
|
if (IS_GLK_REVID(dev_priv, 0, GLK_REVID_A1) &&
|
|
crtc_state->base.adjusted_mode.htotal > 5460)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
intel_hdmi_ycbcr420_config(struct drm_connector *connector,
|
|
struct intel_crtc_state *config,
|
|
int *clock_12bpc, int *clock_8bpc)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(config->base.crtc);
|
|
|
|
if (!connector->ycbcr_420_allowed) {
|
|
DRM_ERROR("Platform doesn't support YCBCR420 output\n");
|
|
return false;
|
|
}
|
|
|
|
/* YCBCR420 TMDS rate requirement is half the pixel clock */
|
|
config->port_clock /= 2;
|
|
*clock_12bpc /= 2;
|
|
*clock_8bpc /= 2;
|
|
config->ycbcr420 = true;
|
|
|
|
/* YCBCR 420 output conversion needs a scaler */
|
|
if (skl_update_scaler_crtc(config)) {
|
|
DRM_DEBUG_KMS("Scaler allocation for output failed\n");
|
|
return false;
|
|
}
|
|
|
|
intel_pch_panel_fitting(intel_crtc, config,
|
|
DRM_MODE_SCALE_FULLSCREEN);
|
|
|
|
return true;
|
|
}
|
|
|
|
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
|
|
struct drm_connector *connector = conn_state->connector;
|
|
struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
|
|
struct intel_digital_connector_state *intel_conn_state =
|
|
to_intel_digital_connector_state(conn_state);
|
|
int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
|
|
int clock_12bpc = clock_8bpc * 3 / 2;
|
|
int desired_bpp;
|
|
bool force_dvi = intel_conn_state->force_audio == HDMI_AUDIO_OFF_DVI;
|
|
|
|
pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink;
|
|
|
|
if (pipe_config->has_hdmi_sink)
|
|
pipe_config->has_infoframe = true;
|
|
|
|
if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) {
|
|
/* See CEA-861-E - 5.1 Default Encoding Parameters */
|
|
pipe_config->limited_color_range =
|
|
pipe_config->has_hdmi_sink &&
|
|
drm_default_rgb_quant_range(adjusted_mode) ==
|
|
HDMI_QUANTIZATION_RANGE_LIMITED;
|
|
} else {
|
|
pipe_config->limited_color_range =
|
|
intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_LIMITED;
|
|
}
|
|
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) {
|
|
pipe_config->pixel_multiplier = 2;
|
|
clock_8bpc *= 2;
|
|
clock_12bpc *= 2;
|
|
}
|
|
|
|
if (drm_mode_is_420_only(&connector->display_info, adjusted_mode)) {
|
|
if (!intel_hdmi_ycbcr420_config(connector, pipe_config,
|
|
&clock_12bpc, &clock_8bpc)) {
|
|
DRM_ERROR("Can't support YCBCR420 output\n");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
|
|
pipe_config->has_pch_encoder = true;
|
|
|
|
if (pipe_config->has_hdmi_sink) {
|
|
if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
|
|
pipe_config->has_audio = intel_hdmi->has_audio;
|
|
else
|
|
pipe_config->has_audio =
|
|
intel_conn_state->force_audio == HDMI_AUDIO_ON;
|
|
}
|
|
|
|
/*
|
|
* HDMI is either 12 or 8, so if the display lets 10bpc sneak
|
|
* through, clamp it down. Note that g4x/vlv don't support 12bpc hdmi
|
|
* outputs. We also need to check that the higher clock still fits
|
|
* within limits.
|
|
*/
|
|
if (hdmi_12bpc_possible(pipe_config) &&
|
|
hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true, force_dvi) == MODE_OK) {
|
|
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
|
|
desired_bpp = 12*3;
|
|
|
|
/* Need to adjust the port link by 1.5x for 12bpc. */
|
|
pipe_config->port_clock = clock_12bpc;
|
|
} else {
|
|
DRM_DEBUG_KMS("picking bpc to 8 for HDMI output\n");
|
|
desired_bpp = 8*3;
|
|
|
|
pipe_config->port_clock = clock_8bpc;
|
|
}
|
|
|
|
if (!pipe_config->bw_constrained) {
|
|
DRM_DEBUG_KMS("forcing pipe bpp to %i for HDMI\n", desired_bpp);
|
|
pipe_config->pipe_bpp = desired_bpp;
|
|
}
|
|
|
|
if (hdmi_port_clock_valid(intel_hdmi, pipe_config->port_clock,
|
|
false, force_dvi) != MODE_OK) {
|
|
DRM_DEBUG_KMS("unsupported HDMI clock, rejecting mode\n");
|
|
return false;
|
|
}
|
|
|
|
/* Set user selected PAR to incoming mode's member */
|
|
adjusted_mode->picture_aspect_ratio = conn_state->picture_aspect_ratio;
|
|
|
|
pipe_config->lane_count = 4;
|
|
|
|
if (scdc->scrambling.supported && (INTEL_GEN(dev_priv) >= 10 ||
|
|
IS_GEMINILAKE(dev_priv))) {
|
|
if (scdc->scrambling.low_rates)
|
|
pipe_config->hdmi_scrambling = true;
|
|
|
|
if (pipe_config->port_clock > 340000) {
|
|
pipe_config->hdmi_scrambling = true;
|
|
pipe_config->hdmi_high_tmds_clock_ratio = true;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void
|
|
intel_hdmi_unset_edid(struct drm_connector *connector)
|
|
{
|
|
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
|
|
|
|
intel_hdmi->has_hdmi_sink = false;
|
|
intel_hdmi->has_audio = false;
|
|
intel_hdmi->rgb_quant_range_selectable = false;
|
|
|
|
intel_hdmi->dp_dual_mode.type = DRM_DP_DUAL_MODE_NONE;
|
|
intel_hdmi->dp_dual_mode.max_tmds_clock = 0;
|
|
|
|
kfree(to_intel_connector(connector)->detect_edid);
|
|
to_intel_connector(connector)->detect_edid = NULL;
|
|
}
|
|
|
|
static void
|
|
intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(connector->dev);
|
|
struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
|
|
enum port port = hdmi_to_dig_port(hdmi)->base.port;
|
|
struct i2c_adapter *adapter =
|
|
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
|
|
enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
|
|
|
|
/*
|
|
* Type 1 DVI adaptors are not required to implement any
|
|
* registers, so we can't always detect their presence.
|
|
* Ideally we should be able to check the state of the
|
|
* CONFIG1 pin, but no such luck on our hardware.
|
|
*
|
|
* The only method left to us is to check the VBT to see
|
|
* if the port is a dual mode capable DP port. But let's
|
|
* only do that when we sucesfully read the EDID, to avoid
|
|
* confusing log messages about DP dual mode adaptors when
|
|
* there's nothing connected to the port.
|
|
*/
|
|
if (type == DRM_DP_DUAL_MODE_UNKNOWN) {
|
|
/* An overridden EDID imply that we want this port for testing.
|
|
* Make sure not to set limits for that port.
|
|
*/
|
|
if (has_edid && !connector->override_edid &&
|
|
intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
|
|
DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
|
|
type = DRM_DP_DUAL_MODE_TYPE1_DVI;
|
|
} else {
|
|
type = DRM_DP_DUAL_MODE_NONE;
|
|
}
|
|
}
|
|
|
|
if (type == DRM_DP_DUAL_MODE_NONE)
|
|
return;
|
|
|
|
hdmi->dp_dual_mode.type = type;
|
|
hdmi->dp_dual_mode.max_tmds_clock =
|
|
drm_dp_dual_mode_max_tmds_clock(type, adapter);
|
|
|
|
DRM_DEBUG_KMS("DP dual mode adaptor (%s) detected (max TMDS clock: %d kHz)\n",
|
|
drm_dp_get_dual_mode_type_name(type),
|
|
hdmi->dp_dual_mode.max_tmds_clock);
|
|
}
|
|
|
|
static bool
|
|
intel_hdmi_set_edid(struct drm_connector *connector)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(connector->dev);
|
|
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
|
|
struct edid *edid;
|
|
bool connected = false;
|
|
struct i2c_adapter *i2c;
|
|
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
|
|
|
|
i2c = intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus);
|
|
|
|
edid = drm_get_edid(connector, i2c);
|
|
|
|
if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
|
|
DRM_DEBUG_KMS("HDMI GMBUS EDID read failed, retry using GPIO bit-banging\n");
|
|
intel_gmbus_force_bit(i2c, true);
|
|
edid = drm_get_edid(connector, i2c);
|
|
intel_gmbus_force_bit(i2c, false);
|
|
}
|
|
|
|
intel_hdmi_dp_dual_mode_detect(connector, edid != NULL);
|
|
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
|
|
|
|
to_intel_connector(connector)->detect_edid = edid;
|
|
if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) {
|
|
intel_hdmi->rgb_quant_range_selectable =
|
|
drm_rgb_quant_range_selectable(edid);
|
|
|
|
intel_hdmi->has_audio = drm_detect_monitor_audio(edid);
|
|
intel_hdmi->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
|
|
|
|
connected = true;
|
|
}
|
|
|
|
return connected;
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
intel_hdmi_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
enum drm_connector_status status;
|
|
struct drm_i915_private *dev_priv = to_i915(connector->dev);
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
|
|
connector->base.id, connector->name);
|
|
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
|
|
|
|
intel_hdmi_unset_edid(connector);
|
|
|
|
if (intel_hdmi_set_edid(connector))
|
|
status = connector_status_connected;
|
|
else
|
|
status = connector_status_disconnected;
|
|
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
|
|
|
|
return status;
|
|
}
|
|
|
|
static void
|
|
intel_hdmi_force(struct drm_connector *connector)
|
|
{
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
|
|
connector->base.id, connector->name);
|
|
|
|
intel_hdmi_unset_edid(connector);
|
|
|
|
if (connector->status != connector_status_connected)
|
|
return;
|
|
|
|
intel_hdmi_set_edid(connector);
|
|
}
|
|
|
|
static int intel_hdmi_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct edid *edid;
|
|
|
|
edid = to_intel_connector(connector)->detect_edid;
|
|
if (edid == NULL)
|
|
return 0;
|
|
|
|
return intel_connector_update_modes(connector, edid);
|
|
}
|
|
|
|
static void intel_hdmi_pre_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_digital_port *intel_dig_port =
|
|
enc_to_dig_port(&encoder->base);
|
|
|
|
intel_hdmi_prepare(encoder, pipe_config);
|
|
|
|
intel_dig_port->set_infoframes(&encoder->base,
|
|
pipe_config->has_infoframe,
|
|
pipe_config, conn_state);
|
|
}
|
|
|
|
static void vlv_hdmi_pre_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
|
|
vlv_phy_pre_encoder_enable(encoder, pipe_config);
|
|
|
|
/* HDMI 1.0V-2dB */
|
|
vlv_set_phy_signal_level(encoder, 0x2b245f5f, 0x00002000, 0x5578b83a,
|
|
0x2b247878);
|
|
|
|
dport->set_infoframes(&encoder->base,
|
|
pipe_config->has_infoframe,
|
|
pipe_config, conn_state);
|
|
|
|
g4x_enable_hdmi(encoder, pipe_config, conn_state);
|
|
|
|
vlv_wait_port_ready(dev_priv, dport, 0x0);
|
|
}
|
|
|
|
static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
intel_hdmi_prepare(encoder, pipe_config);
|
|
|
|
vlv_phy_pre_pll_enable(encoder, pipe_config);
|
|
}
|
|
|
|
static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
intel_hdmi_prepare(encoder, pipe_config);
|
|
|
|
chv_phy_pre_pll_enable(encoder, pipe_config);
|
|
}
|
|
|
|
static void chv_hdmi_post_pll_disable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
chv_phy_post_pll_disable(encoder, old_crtc_state);
|
|
}
|
|
|
|
static void vlv_hdmi_post_disable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
/* Reset lanes to avoid HDMI flicker (VLV w/a) */
|
|
vlv_phy_reset_lanes(encoder, old_crtc_state);
|
|
}
|
|
|
|
static void chv_hdmi_post_disable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
/* Assert data lane reset */
|
|
chv_data_lane_soft_reset(encoder, old_crtc_state, true);
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
}
|
|
|
|
static void chv_hdmi_pre_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
|
|
chv_phy_pre_encoder_enable(encoder, pipe_config);
|
|
|
|
/* FIXME: Program the support xxx V-dB */
|
|
/* Use 800mV-0dB */
|
|
chv_set_phy_signal_level(encoder, 128, 102, false);
|
|
|
|
dport->set_infoframes(&encoder->base,
|
|
pipe_config->has_infoframe,
|
|
pipe_config, conn_state);
|
|
|
|
g4x_enable_hdmi(encoder, pipe_config, conn_state);
|
|
|
|
vlv_wait_port_ready(dev_priv, dport, 0x0);
|
|
|
|
/* Second common lane will stay alive on its own now */
|
|
chv_phy_release_cl2_override(encoder);
|
|
}
|
|
|
|
static void intel_hdmi_destroy(struct drm_connector *connector)
|
|
{
|
|
kfree(to_intel_connector(connector)->detect_edid);
|
|
drm_connector_cleanup(connector);
|
|
kfree(connector);
|
|
}
|
|
|
|
static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
|
|
.detect = intel_hdmi_detect,
|
|
.force = intel_hdmi_force,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.atomic_get_property = intel_digital_connector_atomic_get_property,
|
|
.atomic_set_property = intel_digital_connector_atomic_set_property,
|
|
.late_register = intel_connector_register,
|
|
.early_unregister = intel_connector_unregister,
|
|
.destroy = intel_hdmi_destroy,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
.atomic_duplicate_state = intel_digital_connector_duplicate_state,
|
|
};
|
|
|
|
static const struct drm_connector_helper_funcs intel_hdmi_connector_helper_funcs = {
|
|
.get_modes = intel_hdmi_get_modes,
|
|
.mode_valid = intel_hdmi_mode_valid,
|
|
.atomic_check = intel_digital_connector_atomic_check,
|
|
};
|
|
|
|
static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {
|
|
.destroy = intel_encoder_destroy,
|
|
};
|
|
|
|
static void
|
|
intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
|
|
{
|
|
intel_attach_force_audio_property(connector);
|
|
intel_attach_broadcast_rgb_property(connector);
|
|
intel_attach_aspect_ratio_property(connector);
|
|
connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
|
|
}
|
|
|
|
/*
|
|
* intel_hdmi_handle_sink_scrambling: handle sink scrambling/clock ratio setup
|
|
* @encoder: intel_encoder
|
|
* @connector: drm_connector
|
|
* @high_tmds_clock_ratio = bool to indicate if the function needs to set
|
|
* or reset the high tmds clock ratio for scrambling
|
|
* @scrambling: bool to Indicate if the function needs to set or reset
|
|
* sink scrambling
|
|
*
|
|
* This function handles scrambling on HDMI 2.0 capable sinks.
|
|
* If required clock rate is > 340 Mhz && scrambling is supported by sink
|
|
* it enables scrambling. This should be called before enabling the HDMI
|
|
* 2.0 port, as the sink can choose to disable the scrambling if it doesn't
|
|
* detect a scrambled clock within 100 ms.
|
|
*
|
|
* Returns:
|
|
* True on success, false on failure.
|
|
*/
|
|
bool intel_hdmi_handle_sink_scrambling(struct intel_encoder *encoder,
|
|
struct drm_connector *connector,
|
|
bool high_tmds_clock_ratio,
|
|
bool scrambling)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
struct drm_scrambling *sink_scrambling =
|
|
&connector->display_info.hdmi.scdc.scrambling;
|
|
struct i2c_adapter *adapter =
|
|
intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus);
|
|
|
|
if (!sink_scrambling->supported)
|
|
return true;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] scrambling=%s, TMDS bit clock ratio=1/%d\n",
|
|
connector->base.id, connector->name,
|
|
yesno(scrambling), high_tmds_clock_ratio ? 40 : 10);
|
|
|
|
/* Set TMDS bit clock ratio to 1/40 or 1/10, and enable/disable scrambling */
|
|
return drm_scdc_set_high_tmds_clock_ratio(adapter,
|
|
high_tmds_clock_ratio) &&
|
|
drm_scdc_set_scrambling(adapter, scrambling);
|
|
}
|
|
|
|
static u8 chv_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
|
|
{
|
|
u8 ddc_pin;
|
|
|
|
switch (port) {
|
|
case PORT_B:
|
|
ddc_pin = GMBUS_PIN_DPB;
|
|
break;
|
|
case PORT_C:
|
|
ddc_pin = GMBUS_PIN_DPC;
|
|
break;
|
|
case PORT_D:
|
|
ddc_pin = GMBUS_PIN_DPD_CHV;
|
|
break;
|
|
default:
|
|
MISSING_CASE(port);
|
|
ddc_pin = GMBUS_PIN_DPB;
|
|
break;
|
|
}
|
|
return ddc_pin;
|
|
}
|
|
|
|
static u8 bxt_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
|
|
{
|
|
u8 ddc_pin;
|
|
|
|
switch (port) {
|
|
case PORT_B:
|
|
ddc_pin = GMBUS_PIN_1_BXT;
|
|
break;
|
|
case PORT_C:
|
|
ddc_pin = GMBUS_PIN_2_BXT;
|
|
break;
|
|
default:
|
|
MISSING_CASE(port);
|
|
ddc_pin = GMBUS_PIN_1_BXT;
|
|
break;
|
|
}
|
|
return ddc_pin;
|
|
}
|
|
|
|
static u8 cnp_port_to_ddc_pin(struct drm_i915_private *dev_priv,
|
|
enum port port)
|
|
{
|
|
u8 ddc_pin;
|
|
|
|
switch (port) {
|
|
case PORT_B:
|
|
ddc_pin = GMBUS_PIN_1_BXT;
|
|
break;
|
|
case PORT_C:
|
|
ddc_pin = GMBUS_PIN_2_BXT;
|
|
break;
|
|
case PORT_D:
|
|
ddc_pin = GMBUS_PIN_4_CNP;
|
|
break;
|
|
case PORT_F:
|
|
ddc_pin = GMBUS_PIN_3_BXT;
|
|
break;
|
|
default:
|
|
MISSING_CASE(port);
|
|
ddc_pin = GMBUS_PIN_1_BXT;
|
|
break;
|
|
}
|
|
return ddc_pin;
|
|
}
|
|
|
|
static u8 icl_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
|
|
{
|
|
u8 ddc_pin;
|
|
|
|
switch (port) {
|
|
case PORT_A:
|
|
ddc_pin = GMBUS_PIN_1_BXT;
|
|
break;
|
|
case PORT_B:
|
|
ddc_pin = GMBUS_PIN_2_BXT;
|
|
break;
|
|
case PORT_C:
|
|
ddc_pin = GMBUS_PIN_9_TC1_ICP;
|
|
break;
|
|
case PORT_D:
|
|
ddc_pin = GMBUS_PIN_10_TC2_ICP;
|
|
break;
|
|
case PORT_E:
|
|
ddc_pin = GMBUS_PIN_11_TC3_ICP;
|
|
break;
|
|
case PORT_F:
|
|
ddc_pin = GMBUS_PIN_12_TC4_ICP;
|
|
break;
|
|
default:
|
|
MISSING_CASE(port);
|
|
ddc_pin = GMBUS_PIN_2_BXT;
|
|
break;
|
|
}
|
|
return ddc_pin;
|
|
}
|
|
|
|
static u8 g4x_port_to_ddc_pin(struct drm_i915_private *dev_priv,
|
|
enum port port)
|
|
{
|
|
u8 ddc_pin;
|
|
|
|
switch (port) {
|
|
case PORT_B:
|
|
ddc_pin = GMBUS_PIN_DPB;
|
|
break;
|
|
case PORT_C:
|
|
ddc_pin = GMBUS_PIN_DPC;
|
|
break;
|
|
case PORT_D:
|
|
ddc_pin = GMBUS_PIN_DPD;
|
|
break;
|
|
default:
|
|
MISSING_CASE(port);
|
|
ddc_pin = GMBUS_PIN_DPB;
|
|
break;
|
|
}
|
|
return ddc_pin;
|
|
}
|
|
|
|
static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv,
|
|
enum port port)
|
|
{
|
|
const struct ddi_vbt_port_info *info =
|
|
&dev_priv->vbt.ddi_port_info[port];
|
|
u8 ddc_pin;
|
|
|
|
if (info->alternate_ddc_pin) {
|
|
DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n",
|
|
info->alternate_ddc_pin, port_name(port));
|
|
return info->alternate_ddc_pin;
|
|
}
|
|
|
|
if (IS_CHERRYVIEW(dev_priv))
|
|
ddc_pin = chv_port_to_ddc_pin(dev_priv, port);
|
|
else if (IS_GEN9_LP(dev_priv))
|
|
ddc_pin = bxt_port_to_ddc_pin(dev_priv, port);
|
|
else if (HAS_PCH_CNP(dev_priv))
|
|
ddc_pin = cnp_port_to_ddc_pin(dev_priv, port);
|
|
else if (IS_ICELAKE(dev_priv))
|
|
ddc_pin = icl_port_to_ddc_pin(dev_priv, port);
|
|
else
|
|
ddc_pin = g4x_port_to_ddc_pin(dev_priv, port);
|
|
|
|
DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n",
|
|
ddc_pin, port_name(port));
|
|
|
|
return ddc_pin;
|
|
}
|
|
|
|
void intel_infoframe_init(struct intel_digital_port *intel_dig_port)
|
|
{
|
|
struct drm_i915_private *dev_priv =
|
|
to_i915(intel_dig_port->base.base.dev);
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
intel_dig_port->write_infoframe = vlv_write_infoframe;
|
|
intel_dig_port->set_infoframes = vlv_set_infoframes;
|
|
intel_dig_port->infoframe_enabled = vlv_infoframe_enabled;
|
|
} else if (IS_G4X(dev_priv)) {
|
|
intel_dig_port->write_infoframe = g4x_write_infoframe;
|
|
intel_dig_port->set_infoframes = g4x_set_infoframes;
|
|
intel_dig_port->infoframe_enabled = g4x_infoframe_enabled;
|
|
} else if (HAS_DDI(dev_priv)) {
|
|
intel_dig_port->write_infoframe = hsw_write_infoframe;
|
|
intel_dig_port->set_infoframes = hsw_set_infoframes;
|
|
intel_dig_port->infoframe_enabled = hsw_infoframe_enabled;
|
|
} else if (HAS_PCH_IBX(dev_priv)) {
|
|
intel_dig_port->write_infoframe = ibx_write_infoframe;
|
|
intel_dig_port->set_infoframes = ibx_set_infoframes;
|
|
intel_dig_port->infoframe_enabled = ibx_infoframe_enabled;
|
|
} else {
|
|
intel_dig_port->write_infoframe = cpt_write_infoframe;
|
|
intel_dig_port->set_infoframes = cpt_set_infoframes;
|
|
intel_dig_port->infoframe_enabled = cpt_infoframe_enabled;
|
|
}
|
|
}
|
|
|
|
void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
|
|
struct intel_connector *intel_connector)
|
|
{
|
|
struct drm_connector *connector = &intel_connector->base;
|
|
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
|
|
struct intel_encoder *intel_encoder = &intel_dig_port->base;
|
|
struct drm_device *dev = intel_encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum port port = intel_encoder->port;
|
|
|
|
DRM_DEBUG_KMS("Adding HDMI connector on port %c\n",
|
|
port_name(port));
|
|
|
|
if (WARN(intel_dig_port->max_lanes < 4,
|
|
"Not enough lanes (%d) for HDMI on port %c\n",
|
|
intel_dig_port->max_lanes, port_name(port)))
|
|
return;
|
|
|
|
drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
|
|
DRM_MODE_CONNECTOR_HDMIA);
|
|
drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
|
|
|
|
connector->interlace_allowed = 1;
|
|
connector->doublescan_allowed = 0;
|
|
connector->stereo_allowed = 1;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
|
|
connector->ycbcr_420_allowed = true;
|
|
|
|
intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port);
|
|
|
|
if (WARN_ON(port == PORT_A))
|
|
return;
|
|
intel_encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port);
|
|
|
|
if (HAS_DDI(dev_priv))
|
|
intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
|
|
else
|
|
intel_connector->get_hw_state = intel_connector_get_hw_state;
|
|
|
|
intel_hdmi_add_properties(intel_hdmi, connector);
|
|
|
|
if (is_hdcp_supported(dev_priv, port)) {
|
|
int ret = intel_hdcp_init(intel_connector,
|
|
&intel_hdmi_hdcp_shim);
|
|
if (ret)
|
|
DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
|
|
}
|
|
|
|
intel_connector_attach_encoder(intel_connector, intel_encoder);
|
|
intel_hdmi->attached_connector = intel_connector;
|
|
|
|
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
|
|
* 0xd. Failure to do so will result in spurious interrupts being
|
|
* generated on the port when a cable is not attached.
|
|
*/
|
|
if (IS_G4X(dev_priv) && !IS_GM45(dev_priv)) {
|
|
u32 temp = I915_READ(PEG_BAND_GAP_DATA);
|
|
I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
|
|
}
|
|
}
|
|
|
|
void intel_hdmi_init(struct drm_i915_private *dev_priv,
|
|
i915_reg_t hdmi_reg, enum port port)
|
|
{
|
|
struct intel_digital_port *intel_dig_port;
|
|
struct intel_encoder *intel_encoder;
|
|
struct intel_connector *intel_connector;
|
|
|
|
intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
|
|
if (!intel_dig_port)
|
|
return;
|
|
|
|
intel_connector = intel_connector_alloc();
|
|
if (!intel_connector) {
|
|
kfree(intel_dig_port);
|
|
return;
|
|
}
|
|
|
|
intel_encoder = &intel_dig_port->base;
|
|
|
|
drm_encoder_init(&dev_priv->drm, &intel_encoder->base,
|
|
&intel_hdmi_enc_funcs, DRM_MODE_ENCODER_TMDS,
|
|
"HDMI %c", port_name(port));
|
|
|
|
intel_encoder->hotplug = intel_encoder_hotplug;
|
|
intel_encoder->compute_config = intel_hdmi_compute_config;
|
|
if (HAS_PCH_SPLIT(dev_priv)) {
|
|
intel_encoder->disable = pch_disable_hdmi;
|
|
intel_encoder->post_disable = pch_post_disable_hdmi;
|
|
} else {
|
|
intel_encoder->disable = g4x_disable_hdmi;
|
|
}
|
|
intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
|
|
intel_encoder->get_config = intel_hdmi_get_config;
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
intel_encoder->pre_pll_enable = chv_hdmi_pre_pll_enable;
|
|
intel_encoder->pre_enable = chv_hdmi_pre_enable;
|
|
intel_encoder->enable = vlv_enable_hdmi;
|
|
intel_encoder->post_disable = chv_hdmi_post_disable;
|
|
intel_encoder->post_pll_disable = chv_hdmi_post_pll_disable;
|
|
} else if (IS_VALLEYVIEW(dev_priv)) {
|
|
intel_encoder->pre_pll_enable = vlv_hdmi_pre_pll_enable;
|
|
intel_encoder->pre_enable = vlv_hdmi_pre_enable;
|
|
intel_encoder->enable = vlv_enable_hdmi;
|
|
intel_encoder->post_disable = vlv_hdmi_post_disable;
|
|
} else {
|
|
intel_encoder->pre_enable = intel_hdmi_pre_enable;
|
|
if (HAS_PCH_CPT(dev_priv))
|
|
intel_encoder->enable = cpt_enable_hdmi;
|
|
else if (HAS_PCH_IBX(dev_priv))
|
|
intel_encoder->enable = ibx_enable_hdmi;
|
|
else
|
|
intel_encoder->enable = g4x_enable_hdmi;
|
|
}
|
|
|
|
intel_encoder->type = INTEL_OUTPUT_HDMI;
|
|
intel_encoder->power_domain = intel_port_to_power_domain(port);
|
|
intel_encoder->port = port;
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
if (port == PORT_D)
|
|
intel_encoder->crtc_mask = 1 << 2;
|
|
else
|
|
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
|
|
} else {
|
|
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
|
|
}
|
|
intel_encoder->cloneable = 1 << INTEL_OUTPUT_ANALOG;
|
|
/*
|
|
* BSpec is unclear about HDMI+HDMI cloning on g4x, but it seems
|
|
* to work on real hardware. And since g4x can send infoframes to
|
|
* only one port anyway, nothing is lost by allowing it.
|
|
*/
|
|
if (IS_G4X(dev_priv))
|
|
intel_encoder->cloneable |= 1 << INTEL_OUTPUT_HDMI;
|
|
|
|
intel_dig_port->hdmi.hdmi_reg = hdmi_reg;
|
|
intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
|
|
intel_dig_port->max_lanes = 4;
|
|
|
|
intel_infoframe_init(intel_dig_port);
|
|
|
|
intel_hdmi_init_connector(intel_dig_port, intel_connector);
|
|
}
|