forked from Minki/linux
528222d853
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
279 lines
6.9 KiB
C
279 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// ir-nec-decoder.c - handle NEC IR Pulse/Space protocol
|
|
//
|
|
// Copyright (C) 2010 by Mauro Carvalho Chehab
|
|
|
|
#include <linux/bitrev.h>
|
|
#include <linux/module.h>
|
|
#include "rc-core-priv.h"
|
|
|
|
#define NEC_NBITS 32
|
|
#define NEC_UNIT 563 /* us */
|
|
#define NEC_HEADER_PULSE (16 * NEC_UNIT)
|
|
#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */
|
|
#define NEC_HEADER_SPACE (8 * NEC_UNIT)
|
|
#define NEC_REPEAT_SPACE (4 * NEC_UNIT)
|
|
#define NEC_BIT_PULSE (1 * NEC_UNIT)
|
|
#define NEC_BIT_0_SPACE (1 * NEC_UNIT)
|
|
#define NEC_BIT_1_SPACE (3 * NEC_UNIT)
|
|
#define NEC_TRAILER_PULSE (1 * NEC_UNIT)
|
|
#define NEC_TRAILER_SPACE (10 * NEC_UNIT) /* even longer in reality */
|
|
#define NECX_REPEAT_BITS 1
|
|
|
|
enum nec_state {
|
|
STATE_INACTIVE,
|
|
STATE_HEADER_SPACE,
|
|
STATE_BIT_PULSE,
|
|
STATE_BIT_SPACE,
|
|
STATE_TRAILER_PULSE,
|
|
STATE_TRAILER_SPACE,
|
|
};
|
|
|
|
/**
|
|
* ir_nec_decode() - Decode one NEC pulse or space
|
|
* @dev: the struct rc_dev descriptor of the device
|
|
* @ev: the struct ir_raw_event descriptor of the pulse/space
|
|
*
|
|
* This function returns -EINVAL if the pulse violates the state machine
|
|
*/
|
|
static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
|
|
{
|
|
struct nec_dec *data = &dev->raw->nec;
|
|
u32 scancode;
|
|
enum rc_proto rc_proto;
|
|
u8 address, not_address, command, not_command;
|
|
|
|
if (!is_timing_event(ev)) {
|
|
if (ev.reset)
|
|
data->state = STATE_INACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(&dev->dev, "NEC decode started at state %d (%uus %s)\n",
|
|
data->state, ev.duration, TO_STR(ev.pulse));
|
|
|
|
switch (data->state) {
|
|
|
|
case STATE_INACTIVE:
|
|
if (!ev.pulse)
|
|
break;
|
|
|
|
if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT * 2)) {
|
|
data->is_nec_x = false;
|
|
data->necx_repeat = false;
|
|
} else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
|
|
data->is_nec_x = true;
|
|
else
|
|
break;
|
|
|
|
data->count = 0;
|
|
data->state = STATE_HEADER_SPACE;
|
|
return 0;
|
|
|
|
case STATE_HEADER_SPACE:
|
|
if (ev.pulse)
|
|
break;
|
|
|
|
if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT)) {
|
|
data->state = STATE_BIT_PULSE;
|
|
return 0;
|
|
} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
|
|
data->state = STATE_TRAILER_PULSE;
|
|
return 0;
|
|
}
|
|
|
|
break;
|
|
|
|
case STATE_BIT_PULSE:
|
|
if (!ev.pulse)
|
|
break;
|
|
|
|
if (!eq_margin(ev.duration, NEC_BIT_PULSE, NEC_UNIT / 2))
|
|
break;
|
|
|
|
data->state = STATE_BIT_SPACE;
|
|
return 0;
|
|
|
|
case STATE_BIT_SPACE:
|
|
if (ev.pulse)
|
|
break;
|
|
|
|
if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
|
|
geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
|
|
dev_dbg(&dev->dev, "Repeat last key\n");
|
|
rc_repeat(dev);
|
|
data->state = STATE_INACTIVE;
|
|
return 0;
|
|
} else if (data->count > NECX_REPEAT_BITS)
|
|
data->necx_repeat = false;
|
|
|
|
data->bits <<= 1;
|
|
if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
|
|
data->bits |= 1;
|
|
else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2))
|
|
break;
|
|
data->count++;
|
|
|
|
if (data->count == NEC_NBITS)
|
|
data->state = STATE_TRAILER_PULSE;
|
|
else
|
|
data->state = STATE_BIT_PULSE;
|
|
|
|
return 0;
|
|
|
|
case STATE_TRAILER_PULSE:
|
|
if (!ev.pulse)
|
|
break;
|
|
|
|
if (!eq_margin(ev.duration, NEC_TRAILER_PULSE, NEC_UNIT / 2))
|
|
break;
|
|
|
|
data->state = STATE_TRAILER_SPACE;
|
|
return 0;
|
|
|
|
case STATE_TRAILER_SPACE:
|
|
if (ev.pulse)
|
|
break;
|
|
|
|
if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2))
|
|
break;
|
|
|
|
if (data->count == NEC_NBITS) {
|
|
address = bitrev8((data->bits >> 24) & 0xff);
|
|
not_address = bitrev8((data->bits >> 16) & 0xff);
|
|
command = bitrev8((data->bits >> 8) & 0xff);
|
|
not_command = bitrev8((data->bits >> 0) & 0xff);
|
|
|
|
scancode = ir_nec_bytes_to_scancode(address,
|
|
not_address,
|
|
command,
|
|
not_command,
|
|
&rc_proto);
|
|
|
|
if (data->is_nec_x)
|
|
data->necx_repeat = true;
|
|
|
|
rc_keydown(dev, rc_proto, scancode, 0);
|
|
} else {
|
|
rc_repeat(dev);
|
|
}
|
|
|
|
data->state = STATE_INACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(&dev->dev, "NEC decode failed at count %d state %d (%uus %s)\n",
|
|
data->count, data->state, ev.duration, TO_STR(ev.pulse));
|
|
data->state = STATE_INACTIVE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* ir_nec_scancode_to_raw() - encode an NEC scancode ready for modulation.
|
|
* @protocol: specific protocol to use
|
|
* @scancode: a single NEC scancode.
|
|
*/
|
|
static u32 ir_nec_scancode_to_raw(enum rc_proto protocol, u32 scancode)
|
|
{
|
|
unsigned int addr, addr_inv, data, data_inv;
|
|
|
|
data = scancode & 0xff;
|
|
|
|
if (protocol == RC_PROTO_NEC32) {
|
|
/* 32-bit NEC (used by Apple and TiVo remotes) */
|
|
/* scan encoding: aaAAddDD */
|
|
addr_inv = (scancode >> 24) & 0xff;
|
|
addr = (scancode >> 16) & 0xff;
|
|
data_inv = (scancode >> 8) & 0xff;
|
|
} else if (protocol == RC_PROTO_NECX) {
|
|
/* Extended NEC */
|
|
/* scan encoding AAaaDD */
|
|
addr = (scancode >> 16) & 0xff;
|
|
addr_inv = (scancode >> 8) & 0xff;
|
|
data_inv = data ^ 0xff;
|
|
} else {
|
|
/* Normal NEC */
|
|
/* scan encoding: AADD */
|
|
addr = (scancode >> 8) & 0xff;
|
|
addr_inv = addr ^ 0xff;
|
|
data_inv = data ^ 0xff;
|
|
}
|
|
|
|
/* raw encoding: ddDDaaAA */
|
|
return data_inv << 24 |
|
|
data << 16 |
|
|
addr_inv << 8 |
|
|
addr;
|
|
}
|
|
|
|
static const struct ir_raw_timings_pd ir_nec_timings = {
|
|
.header_pulse = NEC_HEADER_PULSE,
|
|
.header_space = NEC_HEADER_SPACE,
|
|
.bit_pulse = NEC_BIT_PULSE,
|
|
.bit_space[0] = NEC_BIT_0_SPACE,
|
|
.bit_space[1] = NEC_BIT_1_SPACE,
|
|
.trailer_pulse = NEC_TRAILER_PULSE,
|
|
.trailer_space = NEC_TRAILER_SPACE,
|
|
.msb_first = 0,
|
|
};
|
|
|
|
/**
|
|
* ir_nec_encode() - Encode a scancode as a stream of raw events
|
|
*
|
|
* @protocol: protocol to encode
|
|
* @scancode: scancode to encode
|
|
* @events: array of raw ir events to write into
|
|
* @max: maximum size of @events
|
|
*
|
|
* Returns: The number of events written.
|
|
* -ENOBUFS if there isn't enough space in the array to fit the
|
|
* encoding. In this case all @max events will have been written.
|
|
*/
|
|
static int ir_nec_encode(enum rc_proto protocol, u32 scancode,
|
|
struct ir_raw_event *events, unsigned int max)
|
|
{
|
|
struct ir_raw_event *e = events;
|
|
int ret;
|
|
u32 raw;
|
|
|
|
/* Convert a NEC scancode to raw NEC data */
|
|
raw = ir_nec_scancode_to_raw(protocol, scancode);
|
|
|
|
/* Modulate the raw data using a pulse distance modulation */
|
|
ret = ir_raw_gen_pd(&e, max, &ir_nec_timings, NEC_NBITS, raw);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return e - events;
|
|
}
|
|
|
|
static struct ir_raw_handler nec_handler = {
|
|
.protocols = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX |
|
|
RC_PROTO_BIT_NEC32,
|
|
.decode = ir_nec_decode,
|
|
.encode = ir_nec_encode,
|
|
.carrier = 38000,
|
|
.min_timeout = NEC_TRAILER_SPACE,
|
|
};
|
|
|
|
static int __init ir_nec_decode_init(void)
|
|
{
|
|
ir_raw_handler_register(&nec_handler);
|
|
|
|
printk(KERN_INFO "IR NEC protocol handler initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit ir_nec_decode_exit(void)
|
|
{
|
|
ir_raw_handler_unregister(&nec_handler);
|
|
}
|
|
|
|
module_init(ir_nec_decode_init);
|
|
module_exit(ir_nec_decode_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Mauro Carvalho Chehab");
|
|
MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
|
|
MODULE_DESCRIPTION("NEC IR protocol decoder");
|