forked from Minki/linux
2cae8c07cb
Maths went wrong, to get 0x20, we need to do 0x1e + (x) * 2, not 0x18,
fix that offset so we access the correct registers. This would make us
not access the correct SerDes Digital control words, status would be
fine and so we would not be correctly flipping between Fiber and SGMII
modes resulting in incorrect status words being pulled into the SerDes
digital status register.
Fixes: 0e01491de6 ("net: dsa: b53: Add SerDes support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
129 lines
4.0 KiB
C
129 lines
4.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
|
|
*
|
|
* Northstar Plus switch SerDes/SGMII PHY definitions
|
|
*
|
|
* Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
|
|
*/
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/types.h>
|
|
|
|
/* Non-standard page used to access SerDes PHY registers on NorthStar Plus */
|
|
#define B53_SERDES_PAGE 0x16
|
|
#define B53_SERDES_BLKADDR 0x3e
|
|
#define B53_SERDES_LANE 0x3c
|
|
|
|
#define B53_SERDES_ID0 0x20
|
|
#define SERDES_ID0_MODEL_MASK 0x3f
|
|
#define SERDES_ID0_REV_NUM_SHIFT 11
|
|
#define SERDES_ID0_REV_NUM_MASK 0x7
|
|
#define SERDES_ID0_REV_LETTER_SHIFT 14
|
|
|
|
#define B53_SERDES_MII_REG(x) (0x20 + (x) * 2)
|
|
#define B53_SERDES_DIGITAL_CONTROL(x) (0x1e + (x) * 2)
|
|
#define B53_SERDES_DIGITAL_STATUS 0x28
|
|
|
|
/* SERDES_DIGITAL_CONTROL1 */
|
|
#define FIBER_MODE_1000X BIT(0)
|
|
#define TBI_INTERFACE BIT(1)
|
|
#define SIGNAL_DETECT_EN BIT(2)
|
|
#define INVERT_SIGNAL_DETECT BIT(3)
|
|
#define AUTODET_EN BIT(4)
|
|
#define SGMII_MASTER_MODE BIT(5)
|
|
#define DISABLE_DLL_PWRDOWN BIT(6)
|
|
#define CRC_CHECKER_DIS BIT(7)
|
|
#define COMMA_DET_EN BIT(8)
|
|
#define ZERO_COMMA_DET_EN BIT(9)
|
|
#define REMOTE_LOOPBACK BIT(10)
|
|
#define SEL_RX_PKTS_FOR_CNTR BIT(11)
|
|
#define MASTER_MDIO_PHY_SEL BIT(13)
|
|
#define DISABLE_SIGNAL_DETECT_FLT BIT(14)
|
|
|
|
/* SERDES_DIGITAL_CONTROL2 */
|
|
#define EN_PARALLEL_DET BIT(0)
|
|
#define DIS_FALSE_LINK BIT(1)
|
|
#define FLT_FORCE_LINK BIT(2)
|
|
#define EN_AUTONEG_ERR_TIMER BIT(3)
|
|
#define DIS_REMOTE_FAULT_SENSING BIT(4)
|
|
#define FORCE_XMIT_DATA BIT(5)
|
|
#define AUTONEG_FAST_TIMERS BIT(6)
|
|
#define DIS_CARRIER_EXTEND BIT(7)
|
|
#define DIS_TRRR_GENERATION BIT(8)
|
|
#define BYPASS_PCS_RX BIT(9)
|
|
#define BYPASS_PCS_TX BIT(10)
|
|
#define TEST_CNTR_EN BIT(11)
|
|
#define TX_PACKET_SEQ_TEST BIT(12)
|
|
#define TX_IDLE_JAM_SEQ_TEST BIT(13)
|
|
#define CLR_BER_CNTR BIT(14)
|
|
|
|
/* SERDES_DIGITAL_CONTROL3 */
|
|
#define TX_FIFO_RST BIT(0)
|
|
#define FIFO_ELAST_TX_RX_SHIFT 1
|
|
#define FIFO_ELAST_TX_RX_5K 0
|
|
#define FIFO_ELAST_TX_RX_10K 1
|
|
#define FIFO_ELAST_TX_RX_13_5K 2
|
|
#define FIFO_ELAST_TX_RX_18_5K 3
|
|
#define BLOCK_TXEN_MODE BIT(9)
|
|
#define JAM_FALSE_CARRIER_MODE BIT(10)
|
|
#define EXT_PHY_CRS_MODE BIT(11)
|
|
#define INVERT_EXT_PHY_CRS BIT(12)
|
|
#define DISABLE_TX_CRS BIT(13)
|
|
|
|
/* SERDES_DIGITAL_STATUS */
|
|
#define SGMII_MODE BIT(0)
|
|
#define LINK_STATUS BIT(1)
|
|
#define DUPLEX_STATUS BIT(2)
|
|
#define SPEED_STATUS_SHIFT 3
|
|
#define SPEED_STATUS_10 0
|
|
#define SPEED_STATUS_100 1
|
|
#define SPEED_STATUS_1000 2
|
|
#define SPEED_STATUS_2500 3
|
|
#define SPEED_STATUS_MASK SPEED_STATUS_2500
|
|
#define PAUSE_RESOLUTION_TX_SIDE BIT(5)
|
|
#define PAUSE_RESOLUTION_RX_SIDE BIT(6)
|
|
#define LINK_STATUS_CHANGE BIT(7)
|
|
#define EARLY_END_EXT_DET BIT(8)
|
|
#define CARRIER_EXT_ERR_DET BIT(9)
|
|
#define RX_ERR_DET BIT(10)
|
|
#define TX_ERR_DET BIT(11)
|
|
#define CRC_ERR_DET BIT(12)
|
|
#define FALSE_CARRIER_ERR_DET BIT(13)
|
|
#define RXFIFO_ERR_DET BIT(14)
|
|
#define TXFIFO_ERR_DET BIT(15)
|
|
|
|
/* Block offsets */
|
|
#define SERDES_DIGITAL_BLK 0x8300
|
|
#define SERDES_ID0 0x8310
|
|
#define SERDES_MII_BLK 0xffe0
|
|
#define SERDES_XGXSBLK0_BLOCKADDRESS 0xffd0
|
|
|
|
struct phylink_link_state;
|
|
|
|
static inline u8 b53_serdes_map_lane(struct b53_device *dev, int port)
|
|
{
|
|
if (!dev->ops->serdes_map_lane)
|
|
return B53_INVALID_LANE;
|
|
|
|
return dev->ops->serdes_map_lane(dev, port);
|
|
}
|
|
|
|
int b53_serdes_get_link(struct b53_device *dev, int port);
|
|
int b53_serdes_link_state(struct b53_device *dev, int port,
|
|
struct phylink_link_state *state);
|
|
void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode,
|
|
const struct phylink_link_state *state);
|
|
void b53_serdes_an_restart(struct b53_device *dev, int port);
|
|
void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
|
|
phy_interface_t interface, bool link_up);
|
|
void b53_serdes_phylink_validate(struct b53_device *dev, int port,
|
|
unsigned long *supported,
|
|
struct phylink_link_state *state);
|
|
#if IS_ENABLED(CONFIG_B53_SERDES)
|
|
int b53_serdes_init(struct b53_device *dev, int port);
|
|
#else
|
|
static inline int b53_serdes_init(struct b53_device *dev, int port)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|