linux/drivers/net/wireless/prism54/islpci_eth.c
Graham Gower caa06b619f [PATCH] prism54/islpci_eth.c: dev_kfree_skb used with interrupts disabled
dev_kfree_skb should not be used with interrupts disabled.  Change to
use dev_kfree_skb_irq instead.

Signed-off-by: Graham Gower <graham.gower@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:53 -05:00

511 lines
16 KiB
C

/*
*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include "prismcompat.h"
#include "isl_38xx.h"
#include "islpci_eth.h"
#include "islpci_mgt.h"
#include "oid_mgt.h"
/******************************************************************************
Network Interface functions
******************************************************************************/
void
islpci_eth_cleanup_transmit(islpci_private *priv,
isl38xx_control_block *control_block)
{
struct sk_buff *skb;
u32 index;
/* compare the control block read pointer with the free pointer */
while (priv->free_data_tx !=
le32_to_cpu(control_block->
device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
/* read the index of the first fragment to be freed */
index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
/* check for holes in the arrays caused by multi fragment frames
* searching for the last fragment of a frame */
if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) {
/* entry is the last fragment of a frame
* free the skb structure and unmap pci memory */
skb = priv->data_low_tx[index];
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"cleanup skb %p skb->data %p skb->len %u truesize %u\n ",
skb, skb->data, skb->len, skb->truesize);
#endif
pci_unmap_single(priv->pdev,
priv->pci_map_tx_address[index],
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
skb = NULL;
}
/* increment the free data low queue pointer */
priv->free_data_tx++;
}
}
int
islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
{
islpci_private *priv = netdev_priv(ndev);
isl38xx_control_block *cb = priv->control_block;
u32 index;
dma_addr_t pci_map_address;
int frame_size;
isl38xx_fragment *fragment;
int offset;
struct sk_buff *newskb;
int newskb_offset;
unsigned long flags;
unsigned char wds_mac[6];
u32 curr_frag;
int err = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
#endif
/* lock the driver code */
spin_lock_irqsave(&priv->slock, flags);
/* check whether the destination queue has enough fragments for the frame */
curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
printk(KERN_ERR "%s: transmit device queue full when awake\n",
ndev->name);
netif_stop_queue(ndev);
/* trigger the device */
isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
err = -EBUSY;
goto drop_free;
}
/* Check alignment and WDS frame formatting. The start of the packet should
* be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
* and add WDS address information */
if (likely(((long) skb->data & 0x03) | init_wds)) {
/* get the number of bytes to add and re-allign */
offset = (4 - (long) skb->data) & 0x03;
offset += init_wds ? 6 : 0;
/* check whether the current skb can be used */
if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
unsigned char *src = skb->data;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
init_wds);
#endif
/* align the buffer on 4-byte boundary */
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
if (init_wds) {
/* wds requires an additional address field of 6 bytes */
skb_put(skb, 6);
#ifdef ISLPCI_ETH_DEBUG
printk("islpci_eth_transmit:wds_mac\n");
#endif
memmove(skb->data + 6, src, skb->len);
memcpy(skb->data, wds_mac, 6);
} else {
memmove(skb->data, src, skb->len);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
src, skb->len);
#endif
} else {
newskb =
dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
if (unlikely(newskb == NULL)) {
printk(KERN_ERR "%s: Cannot allocate skb\n",
ndev->name);
err = -ENOMEM;
goto drop_free;
}
newskb_offset = (4 - (long) newskb->data) & 0x03;
/* Check if newskb->data is aligned */
if (newskb_offset)
skb_reserve(newskb, newskb_offset);
skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
if (init_wds) {
memcpy(newskb->data + 6, skb->data, skb->len);
memcpy(newskb->data, wds_mac, 6);
#ifdef ISLPCI_ETH_DEBUG
printk("islpci_eth_transmit:wds_mac\n");
#endif
} else
memcpy(newskb->data, skb->data, skb->len);
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
newskb->data, skb->data, skb->len, init_wds);
#endif
newskb->dev = skb->dev;
dev_kfree_skb_irq(skb);
skb = newskb;
}
}
/* display the buffer contents for debugging */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* map the skb buffer to pci memory for DMA operation */
pci_map_address = pci_map_single(priv->pdev,
(void *) skb->data, skb->len,
PCI_DMA_TODEVICE);
if (unlikely(pci_map_address == 0)) {
printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
ndev->name);
err = -EIO;
goto drop_free;
}
/* Place the fragment in the control block structure. */
index = curr_frag % ISL38XX_CB_TX_QSIZE;
fragment = &cb->tx_data_low[index];
priv->pci_map_tx_address[index] = pci_map_address;
/* store the skb address for future freeing */
priv->data_low_tx[index] = skb;
/* set the proper fragment start address and size information */
frame_size = skb->len;
fragment->size = cpu_to_le16(frame_size);
fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
fragment->address = cpu_to_le32(pci_map_address);
curr_frag++;
/* The fragment address in the control block must have been
* written before announcing the frame buffer to device. */
wmb();
cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
> ISL38XX_CB_TX_QSIZE) {
/* stop sends from upper layers */
netif_stop_queue(ndev);
/* set the full flag for the transmission queue */
priv->data_low_tx_full = 1;
}
/* set the transmission time */
ndev->trans_start = jiffies;
priv->statistics.tx_packets++;
priv->statistics.tx_bytes += skb->len;
/* trigger the device */
islpci_trigger(priv);
/* unlock the driver code */
spin_unlock_irqrestore(&priv->slock, flags);
return 0;
drop_free:
priv->statistics.tx_dropped++;
spin_unlock_irqrestore(&priv->slock, flags);
dev_kfree_skb(skb);
return err;
}
static inline int
islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
{
/* The card reports full 802.11 packets but with a 20 bytes
* header and without the FCS. But there a is a bit that
* indicates if the packet is corrupted :-) */
struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data;
if (hdr->flags & 0x01)
/* This one is bad. Drop it ! */
return -1;
if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) {
struct avs_80211_1_header *avs;
/* extract the relevant data from the header */
u32 clock = le32_to_cpu(hdr->clock);
u8 rate = hdr->rate;
u16 freq = le16_to_cpu(hdr->freq);
u8 rssi = hdr->rssi;
skb_pull(*skb, sizeof (struct rfmon_header));
if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) {
struct sk_buff *newskb = skb_copy_expand(*skb,
sizeof (struct
avs_80211_1_header),
0, GFP_ATOMIC);
if (newskb) {
dev_kfree_skb_irq(*skb);
*skb = newskb;
} else
return -1;
/* This behavior is not very subtile... */
}
/* make room for the new header and fill it. */
avs =
(struct avs_80211_1_header *) skb_push(*skb,
sizeof (struct
avs_80211_1_header));
avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
avs->mactime = cpu_to_be64(le64_to_cpu(clock));
avs->hosttime = cpu_to_be64(jiffies);
avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */
avs->channel = cpu_to_be32(channel_of_freq(freq));
avs->datarate = cpu_to_be32(rate * 5);
avs->antenna = cpu_to_be32(0); /*unknown */
avs->priority = cpu_to_be32(0); /*unknown */
avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */
avs->ssi_signal = cpu_to_be32(rssi & 0x7f);
avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */
avs->preamble = cpu_to_be32(0); /*unknown */
avs->encoding = cpu_to_be32(0); /*unknown */
} else
skb_pull(*skb, sizeof (struct rfmon_header));
(*skb)->protocol = htons(ETH_P_802_2);
(*skb)->mac.raw = (*skb)->data;
(*skb)->pkt_type = PACKET_OTHERHOST;
return 0;
}
int
islpci_eth_receive(islpci_private *priv)
{
struct net_device *ndev = priv->ndev;
isl38xx_control_block *control_block = priv->control_block;
struct sk_buff *skb;
u16 size;
u32 index, offset;
unsigned char *src;
int discard = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
#endif
/* the device has written an Ethernet frame in the data area
* of the sk_buff without updating the structure, do it now */
index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
size = le16_to_cpu(control_block->rx_data_low[index].size);
skb = priv->data_low_rx[index];
offset = ((unsigned long)
le32_to_cpu(control_block->rx_data_low[index].address) -
(unsigned long) skb->data) & 3;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ",
control_block->rx_data_low[priv->free_data_rx].address, skb->data,
skb->len, offset, skb->truesize);
#endif
/* delete the streaming DMA mapping before processing the skb */
pci_unmap_single(priv->pdev,
priv->pci_map_rx_address[index],
MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
/* update the skb structure and allign the buffer */
skb_put(skb, size);
if (offset) {
/* shift the buffer allocation offset bytes to get the right frame */
skb_pull(skb, 2);
skb_put(skb, 2);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
/* display the buffer contents for debugging */
DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* check whether WDS is enabled and whether the data frame is a WDS frame */
if (init_wds) {
/* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
src = skb->data + 6;
memmove(skb->data, src, skb->len - 6);
skb_trim(skb, skb->len - 6);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
/* display the buffer contents for debugging */
DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* do some additional sk_buff and network layer parameters */
skb->dev = ndev;
/* take care of monitor mode and spy monitoring. */
if (unlikely(priv->iw_mode == IW_MODE_MONITOR))
discard = islpci_monitor_rx(priv, &skb);
else {
if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
/* The packet has a rx_annex. Read it for spy monitoring, Then
* remove it, while keeping the 2 leading MAC addr.
*/
struct iw_quality wstats;
struct rx_annex_header *annex =
(struct rx_annex_header *) skb->data;
wstats.level = annex->rfmon.rssi;
/* The noise value can be a bit outdated if nobody's
* reading wireless stats... */
wstats.noise = priv->local_iwstatistics.qual.noise;
wstats.qual = wstats.level - wstats.noise;
wstats.updated = 0x07;
/* Update spy records */
wireless_spy_update(ndev, annex->addr2, &wstats);
memcpy(skb->data + sizeof (struct rfmon_header),
skb->data, 2 * ETH_ALEN);
skb_pull(skb, sizeof (struct rfmon_header));
}
skb->protocol = eth_type_trans(skb, ndev);
}
skb->ip_summed = CHECKSUM_NONE;
priv->statistics.rx_packets++;
priv->statistics.rx_bytes += size;
/* deliver the skb to the network layer */
#ifdef ISLPCI_ETH_DEBUG
printk
("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
skb->data[0], skb->data[1], skb->data[2], skb->data[3],
skb->data[4], skb->data[5]);
#endif
if (unlikely(discard)) {
dev_kfree_skb_irq(skb);
skb = NULL;
} else
netif_rx(skb);
/* increment the read index for the rx data low queue */
priv->free_data_rx++;
/* add one or more sk_buff structures */
while (index =
le32_to_cpu(control_block->
driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
/* allocate an sk_buff for received data frames storage
* include any required allignment operations */
skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
if (unlikely(skb == NULL)) {
/* error allocating an sk_buff structure elements */
DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
break;
}
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
/* store the new skb structure pointer */
index = index % ISL38XX_CB_RX_QSIZE;
priv->data_low_rx[index] = skb;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ",
skb, skb->data, skb->len, index, skb->truesize);
#endif
/* set the streaming DMA mapping for proper PCI bus operation */
priv->pci_map_rx_address[index] =
pci_map_single(priv->pdev, (void *) skb->data,
MAX_FRAGMENT_SIZE_RX + 2,
PCI_DMA_FROMDEVICE);
if (unlikely(priv->pci_map_rx_address[index] == (dma_addr_t) NULL)) {
/* error mapping the buffer to device accessable memory address */
DEBUG(SHOW_ERROR_MESSAGES,
"Error mapping DMA address\n");
/* free the skbuf structure before aborting */
dev_kfree_skb_irq((struct sk_buff *) skb);
skb = NULL;
break;
}
/* update the fragment address */
control_block->rx_data_low[index].address = cpu_to_le32((u32)
priv->
pci_map_rx_address
[index]);
wmb();
/* increment the driver read pointer */
add_le32p((u32 *) &control_block->
driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
}
/* trigger the device */
islpci_trigger(priv);
return 0;
}
void
islpci_do_reset_and_wake(void *data)
{
islpci_private *priv = (islpci_private *) data;
islpci_reset(priv, 1);
netif_wake_queue(priv->ndev);
priv->reset_task_pending = 0;
}
void
islpci_eth_tx_timeout(struct net_device *ndev)
{
islpci_private *priv = netdev_priv(ndev);
struct net_device_stats *statistics = &priv->statistics;
/* increment the transmit error counter */
statistics->tx_errors++;
printk(KERN_WARNING "%s: tx_timeout", ndev->name);
if (!priv->reset_task_pending) {
priv->reset_task_pending = 1;
printk(", scheduling a reset");
netif_stop_queue(ndev);
schedule_work(&priv->reset_task);
}
printk("\n");
}