forked from Minki/linux
46e446db4f
Add OF support in Document/devicetree directory. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
38 lines
1.2 KiB
Plaintext
38 lines
1.2 KiB
Plaintext
* I2C
|
|
|
|
Required properties :
|
|
|
|
- reg : Offset and length of the register set for the device
|
|
- compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
|
|
compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
|
|
For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
|
|
as shown in the example below.
|
|
|
|
Recommended properties :
|
|
|
|
- interrupts : <a b> where a is the interrupt number and b is a
|
|
field that represents an encoding of the sense and level
|
|
information for the interrupt. This should be encoded based on
|
|
the information in section 2) depending on the type of interrupt
|
|
controller you have.
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
- mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
|
|
status register of i2c controller instead.
|
|
- mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
|
|
|
|
Examples:
|
|
twsi1: i2c@d4011000 {
|
|
compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
|
|
reg = <0xd4011000 0x1000>;
|
|
interrupts = <7>;
|
|
mrvl,i2c-fast-mode;
|
|
};
|
|
|
|
twsi2: i2c@d4025000 {
|
|
compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
|
|
reg = <0xd4025000 0x1000>;
|
|
interrupts = <58>;
|
|
};
|
|
|