Kevin Hilman 7a093c74c7 Merge branch 'renesas/dt2' into next/dt ... From Simon Horman: * renesas/dt2: (21 commits) ARM: shmobile: bockw: fixup ether node naming ARM: shmobile: r8a7779: add irqpin default status on DTSI ARM: shmobile: marzen: fixup SMSC IRQ number on DTS ARM: shmobile: bockw: add SMSC support on DTS ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSI ARM: shmobile: r8a7791 SMP device tree node ARM: shmobile: r8a7791 Arch timer device tree node ARM: shmobile: r8a7791 IRQC device tree node ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces ARM: shmobile: armadillo-reference: Add PWM backlight node to DT ARM: shmobile: r8a73a4: add a DT node for the DMAC ARM: shmobile: r8a7790: add I2C DT nodes ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards ARM: shmobile: r8a7778: add usb phy power control function ARM: shmobile: r8a7778: add USBHS clock ARM: shmobile: r8a7791 CMT support ARM: shmobile: r8a7791 SCIF support ARM: shmobile: Initial r8a7791 SoC support ARM: shmobile: r8a7778: add SSI/SRU clock support ARM: shmobile: r8a7790: Add DU and LVDS clocks ... Signed-off-by: Kevin Hilman <khilman@linaro.org>		2013-10-14 13:53:12 -07:00
..
include	kbuild: create an "include chroot" for DT bindings	2013-04-05 12:22:32 -06:00
testcases
aks-cdu.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
am33xx.dtsi	usb: usb: dsps: update code according to the binding document	2013-08-27 14:18:32 -05:00
am43x-epos-evm.dts	ARM: dts: AM43x EPOS EVM support	2013-06-19 05:40:55 -05:00
am335x-bone-common.dtsi	ARM: dts: am335x-bone*: add DT for BeagleBone Black	2013-09-17 14:56:22 +02:00
am335x-bone.dts	ARM: dts: am335x-bone*: add DT for BeagleBone Black	2013-09-17 14:56:22 +02:00
am335x-boneblack.dts	ARM: dts: am335x-bone*: add DT for BeagleBone Black	2013-09-17 14:56:22 +02:00
am335x-evm.dts	usb: musb: am335x-evm: Do not remove the session bit HOST-only mode	2013-08-27 14:18:41 -05:00
am335x-evmsk.dts	pwm: Changes for v3.12-rc1	2013-09-03 21:15:23 -07:00
am3517_mt_ventoux.dts	ARM: dts: AM3XXX: Use #include for all device trees	2013-06-18 18:53:41 -05:00
am3517-evm.dts	ARM: dts: AM3XXX: Use #include for all device trees	2013-06-18 18:53:41 -05:00
am4372.dtsi	ARM: dts: AM43x: Initial support	2013-06-18 18:53:41 -05:00
animeo_ip.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
armada-370-db.dts	ARM: mvebu: Add BootROM to Armada 370/XP device tree	2013-08-06 14:11:20 +00:00
armada-370-mirabox.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-370-netgear-rn102.dts	ARM: mvebu: use dts pre-processor for readynas 102	2013-08-16 13:02:10 +00:00
armada-370-rd.dts	ARM: mvebu: Relocate PCIe node in Armada 370 RD board	2013-08-09 13:17:17 +00:00
armada-370-xp.dtsi	ARM: mvebu: the MPIC now provides MSI controller features	2013-09-30 15:00:22 +00:00
armada-370.dtsi	ARM: mvebu: link PCIe controllers to the MSI controller	2013-09-30 15:00:27 +00:00
armada-xp-axpwifiap.dts	ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding	2013-08-07 20:05:05 +00:00
armada-xp-db.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-xp-gp.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-xp-matrix.dts	arm: mvebu: add support for the Armada XP Matrix board	2013-10-03 15:13:01 +00:00
armada-xp-mv78230.dtsi	ARM: mvebu: link PCIe controllers to the MSI controller	2013-09-30 15:00:27 +00:00
armada-xp-mv78260.dtsi	ARM: mvebu: link PCIe controllers to the MSI controller	2013-09-30 15:00:27 +00:00
armada-xp-mv78460.dtsi	ARM: mvebu: link PCIe controllers to the MSI controller	2013-09-30 15:00:27 +00:00
armada-xp-openblocks-ax3-4.dts	ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes	2013-08-06 14:11:27 +00:00
armada-xp.dtsi	ARM: dts: mvebu: Update with the new compatible string for mv64xxx-i2c	2013-09-17 18:38:53 +00:00
at91-ariag25.dts	ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled	2013-05-31 16:42:27 +02:00
at91-foxg20.dts	ARM: at91: switch Fox G20 board .dts to pre-processor defines	2013-05-31 16:42:28 +02:00
at91rm9200_pqfp.dtsi	ARM: at91/dt: add at91rm9200 PQFP package version	2013-08-21 12:18:52 +02:00
at91rm9200.dtsi	ARM: at91: at91rm9200: set default mmc0 pinctrl-names	2013-08-21 11:40:22 +02:00
at91rm9200ek.dts	ARM: at91: dt: rm9200ek: add spi support	2013-06-26 10:13:39 +02:00
at91sam9g15.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g15ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g20.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g20ek_2mmc.dts	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
at91sam9g20ek_common.dtsi	ARM: at91/dts: add the watchdog nodes for at91 boards	2013-05-31 21:54:50 +02:00
at91sam9g20ek.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
at91sam9g25.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g25ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g35.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g35ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9g45.dtsi	Again some nice DT updates for AT91:	2013-06-14 18:51:21 -07:00
at91sam9m10g45ek.dts	ARM: at91: sam9m10g45ek add udc DT support	2013-06-15 00:15:22 +02:00
at91sam9n12.dtsi	ARM: at91: at91sam9n12: add pinctrl of TWI	2013-08-21 11:28:13 +02:00
at91sam9n12ek.dts	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
at91sam9x5.dtsi	ARM: at91/dt: sam9x5: add SSC DMA parameters	2013-08-21 13:31:27 +02:00
at91sam9x5cm.dtsi	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
at91sam9x5ek.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
at91sam9x25.dtsi	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
at91sam9x25ek.dts	Adding the DT support to USB gadget High-Speed aka usba.	2013-06-14 18:58:28 -07:00
at91sam9x35.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9x35ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
at91sam9260.dtsi	ARM: at91: at91sam9260: add missing pinctrl-names on mmc	2013-08-21 11:14:18 +02:00
at91sam9263.dtsi	Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dt	2013-06-07 16:39:38 -07:00
at91sam9263ek.dts	ARM: at91/dts: add the watchdog nodes for at91 boards	2013-05-31 21:54:50 +02:00
atlas6-evb.dts	ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board	2013-03-18 17:15:33 +01:00
atlas6.dtsi	Linux 3.11-rc7	2013-08-29 09:46:30 +02:00
bcm2835-rpi-b.dts	ARM: bcm2835: Add Raspberry Pi's ACT LED to DT	2013-05-16 20:29:48 -06:00
bcm2835.dtsi	ARM: bcm2835: override the HW UART periphid	2013-06-02 11:50:41 -07:00
bcm11351-brt.dts	ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)	2013-08-20 10:47:47 -07:00
bcm11351.dtsi	ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)	2013-08-20 10:47:47 -07:00
bcm28155-ap.dts	ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)	2013-08-20 10:47:47 -07:00
cros5250-common.dtsi	ARM: dts: change compatible strings for EXYNOS5250 hdmi subsystem	2013-06-28 21:13:57 +09:00
da850-enbw-cmc.dts	ARM: davinci: da850: Use #include for all device trees	2013-06-20 15:04:30 +05:30
da850-evm.dts	ARM: davinci: da850: add DT node for ethernet	2013-08-22 00:44:58 +05:30
da850.dtsi	ARM: davinci: da850: do not specify clock_frequency for UART DT node	2013-08-22 00:44:58 +05:30
dove-cm-a510.dts	ARM: dove: use preprocessor on device tree files	2013-09-30 15:00:35 +00:00
dove-cubox.dts	ARM: dove: use preprocessor on device tree files	2013-09-30 15:00:35 +00:00
dove-d2plug.dts	ARM: dove: use preprocessor on device tree files	2013-09-30 15:00:35 +00:00
dove-d3plug.dts	ARM: dove: add initial DT file for Globalscale D3Plug	2013-09-30 15:00:54 +00:00
dove-dove-db.dts	ARM: dove: use preprocessor on device tree files	2013-09-30 15:00:35 +00:00
dove.dtsi	ARM: dove: add PCIe controllers to SoC DT	2013-09-30 15:00:50 +00:00
ea3250.dts
ecx-2000.dts
ecx-common.dtsi	sata highbank: add bit-banged SGPIO driver support	2013-06-06 14:05:24 -07:00
elpida_ecb240abacn.dtsi
emev2-kzm9d-reference.dts	ARM: shmobile: kzm9d: remove nfsroot settings from bootargs	2013-08-06 18:07:13 +09:00
emev2-kzm9d.dts	ARM: shmobile: kzm9d: remove nfsroot settings from bootargs	2013-08-06 18:07:13 +09:00
emev2.dtsi	ARM: shmobile: emev2: add PMU information to emev2.dtsi	2013-07-31 15:31:16 +09:00
ethernut5.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
evk-pro3.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
exynos4.dtsi	The common clk framework changes for 3.12 are dominated by clock driver	2013-09-09 15:49:04 -07:00
exynos4x12-pinctrl.dtsi	ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals	2013-08-06 02:49:43 +09:00
exynos4x12.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
exynos5.dtsi	ARM: dts: Fix the RTC DT node name for Exynos5250	2013-08-26 02:28:05 +09:00
exynos4210-origen.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4210-pinctrl.dtsi	ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes	2013-08-07 01:08:24 +09:00
exynos4210-smdkv310.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4210-trats.dts	ARM: dts: Add S5K5BA sensor regulator definitions for Trats board	2013-08-07 01:08:25 +09:00
exynos4210-universal_c210.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4210.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
exynos4212.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4412-odroidx.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4412-origen.dts	ARM: dts: Add secure-firmware boot support for OrigenQaud board	2013-08-19 04:30:16 +09:00
exynos4412-smdk4412.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos4412-trats2.dts	ARM: dts: Add SPI1 controller and s5c73m3 sensor node for TRATS2	2013-08-07 01:07:57 +09:00
exynos4412.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos5250-arndale.dts	ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC	2013-08-26 02:28:05 +09:00
exynos5250-pinctrl.dtsi	ARM SoC device tree changes	2013-07-02 14:23:01 -07:00
exynos5250-smdk5250.dts	ARM: dts: Update DP controller DT Node for Exynos5 based SoCs	2013-08-19 01:56:30 +09:00
exynos5250-snow.dts	ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC	2013-08-26 02:28:05 +09:00
exynos5250.dtsi	ARM: SoC late changes for v3.12	2013-09-09 16:35:29 -07:00
exynos5420-pinctrl.dtsi	ARM: dts: Add pin state information for DP HPD support to Exynos5420	2013-08-19 01:56:31 +09:00
exynos5420-smdk5420.dts	ARM: dts: Add pin state information for DP HPD support to Exynos5420	2013-08-19 01:56:31 +09:00
exynos5420.dtsi	ARM: SoC late changes for v3.12	2013-09-09 16:35:29 -07:00
exynos5440-sd5v1.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
exynos5440-ssdk5440.dts	ARM SoC driver specific changes	2013-07-02 14:33:21 -07:00
exynos5440.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
ge863-pro3.dtsi	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
highbank.dts
imx6dl-pinfunc.h	ARM: dts: imx: share pad macro names between imx6q and imx6dl	2013-08-22 23:29:11 +08:00
imx6dl-sabreauto.dts	ARM: dts: imx: share pad macro names between imx6q and imx6dl	2013-08-22 23:29:11 +08:00
imx6dl-sabresd.dts	ARM: dts: imx: share pad macro names between imx6q and imx6dl	2013-08-22 23:29:11 +08:00
imx6dl-wandboard.dts	ARM: dts: imx6: Add support for imx6q wandboard	2013-08-22 23:29:28 +08:00
imx6dl.dtsi	ARM: dts: imx: ocram size is different between imx6q and imx6dl	2013-08-22 23:29:44 +08:00
imx6q-arm2.dts	ARM: dts: imx6qdl/imx6sl: add the dma property for uart	2013-08-22 23:29:16 +08:00
imx6q-phytec-pbab01.dts	ARM: dts: Phytec imx6q pfla02 and pbab01 support	2013-06-17 16:04:31 +08:00
imx6q-phytec-pfla02.dtsi	ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module	2013-08-22 23:29:50 +08:00
imx6q-pinfunc.h	ARM: dts: imx6q: fix the wrong offset of the Pad Mux register	2013-09-17 10:04:25 +08:00
imx6q-sabreauto.dts	ARM: dtsi: enable ahci sata on imx6q platforms	2013-08-22 23:29:25 +08:00
imx6q-sabrelite.dts	ARM: imx6q: remove board specific CLKO setup	2013-08-22 23:29:34 +08:00
imx6q-sabresd.dts	ARM: dtsi: enable ahci sata on imx6q platforms	2013-08-22 23:29:25 +08:00
imx6q-sbc6x.dts	ARM: dts: MicroSys sbc6x support (i.MX6)	2013-04-09 22:53:37 +08:00
imx6q-wandboard.dts	ARM: dts: imx6q-wandboard: Add sata support	2013-08-22 23:29:30 +08:00
imx6q.dtsi	ARM: dts: imx: ocram size is different between imx6q and imx6dl	2013-08-22 23:29:44 +08:00
imx6qdl-sabreauto.dtsi	ARM: dts: imx: share pad macro names between imx6q and imx6dl	2013-08-22 23:29:11 +08:00
imx6qdl-sabresd.dtsi	ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog	2013-08-22 23:30:00 +08:00
imx6qdl-wandboard.dtsi	ARM: dts: wandboard: Add support for SDIO bcm4329	2013-08-22 23:29:54 +08:00
imx6qdl.dtsi	ARM: dts: imx: ocram size is different between imx6q and imx6dl	2013-08-22 23:29:44 +08:00
imx6sl-evk.dts	ARM: dts: imx6sl: add initial imx6sl-evk support	2013-06-17 16:04:21 +08:00
imx6sl-pinfunc.h	pinctrl: add pinctrl driver for imx6sl	2013-04-09 22:53:38 +08:00
imx6sl.dtsi	ARM: dts: imx: use generic DMA bindings for SSI nodes	2013-08-22 23:29:32 +08:00
imx23-evk.dts	ARM: dts: imx23-evk: enable Low Resolution ADC	2013-08-16 16:26:45 +08:00
imx23-olinuxino.dts	ARM: dts: imx23-olinuxino: enable Low Resolution ADC	2013-08-16 16:26:47 +08:00
imx23-stmp378x_devb.dts
imx23.dtsi	ARM: dts: mxs: Add spi alias	2013-08-16 16:26:48 +08:00
imx25-karo-tx25.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx25-pdk.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx25.dtsi	ARM: dts: imx25: Make lcdc compatible to imx21 fb	2013-08-22 23:29:15 +08:00
imx27-apf27.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx27-apf27dev.dts	ARM: apf27dev: add rtc ds1374 to the device tree	2013-08-22 23:28:16 +08:00
imx27-pdk.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx27-phytec-phycard-s-rdk.dts	ARM: dts: imx27 phyCARD-S, i2c ADC device node	2013-08-22 23:29:05 +08:00
imx27-phytec-phycard-s-som.dts	ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk	2013-08-22 23:29:03 +08:00
imx27-phytec-phycore-rdk.dts	ARM: dts: imx27-phytec-phycore-rdk: Add CAN node	2013-08-22 23:28:56 +08:00
imx27-phytec-phycore-som.dts	ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX	2013-08-22 23:29:57 +08:00
imx27.dtsi	ARM: imx27.dtsi: fix CSPI PER clock id	2013-09-17 10:04:23 +08:00
imx28-apf28.dts
imx28-apf28dev.dts	ARM: dts: apf28dev: Add touchscreen support for APF28dev	2013-06-17 15:43:29 +08:00
imx28-apx4devkit.dts	ARM: mxs: saif0 is the clock provider to sgtl5000	2013-07-15 08:28:09 +08:00
imx28-cfa10036.dts	ARM: mxs: dt: cfa10036: make hogpins grabbed by respective drivers	2013-08-16 16:26:41 +08:00
imx28-cfa10037.dts	ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers	2013-08-16 16:26:36 +08:00
imx28-cfa10049.dts	ARM: mxs: dt: cfa10049: make hogpins grabbed by respective drivers	2013-08-16 16:26:37 +08:00
imx28-cfa10055.dts	ARM: mxs: dt: cfa10055: make hogpins grabbed by respective drivers	2013-08-16 16:26:39 +08:00
imx28-cfa10056.dts	ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree	2013-08-16 16:26:34 +08:00
imx28-cfa10057.dts	ARM: mxs: dt: cfa10057: remove hogpins	2013-08-16 16:26:40 +08:00
imx28-cfa10058.dts	ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree	2013-08-16 16:26:35 +08:00
imx28-evk.dts	ARM: dts: imx28-evk: add the RTS/CTS property for auart0	2013-08-05 15:05:18 +08:00
imx28-m28evk.dts	ARM: mxs: Add backlight support for M28EVK	2013-08-16 16:26:42 +08:00
imx28-sps1.dts	ARM: mxs: Slow down the I2C clock speed	2013-04-03 09:34:01 +08:00
imx28-tx28.dts
imx28.dtsi	ARM: dts: mxs: add pin config for LCD sync and clock pins	2013-08-16 16:26:53 +08:00
imx31-bug.dts	ARM: imx: use #include for all device trees	2013-04-09 22:52:49 +08:00
imx31.dtsi	ARM: dts: imx: Add the missing cpus node	2013-08-22 23:29:01 +08:00
imx35-pinfunc.h	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx51-apf51.dts	ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template	2013-08-22 23:29:53 +08:00
imx51-apf51dev.dts	ARM: imx: apf51dev: add ecspi1, ecspi2 and i2c2 support	2013-04-09 22:52:54 +08:00
imx51-babbage.dts	ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template	2013-08-22 23:29:53 +08:00
imx51-pinfunc.h	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx51.dtsi	ARM: imx51.dtsi: fix PATA device clock	2013-09-17 10:04:24 +08:00
imx53-ard.dts	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx53-evk.dts	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx53-m53evk.dts	ARM: mx5: Add support for DENX M53EVK	2013-06-17 16:04:16 +08:00
imx53-mba53.dts	ARM i.MX53: mba53: Fix PWM backlight DT node	2013-07-15 08:28:10 +08:00
imx53-pinfunc.h	ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration	2013-04-09 22:53:37 +08:00
imx53-qsb.dts	ARM: dts: imx53-qsb: Make USBH1 functional	2013-08-22 23:29:51 +08:00
imx53-smd.dts	pinctrl: imx: move hard-coding data into device tree	2013-04-09 22:52:50 +08:00
imx53-tqma53.dtsi	ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2	2013-06-17 16:04:26 +08:00
imx53-tx53.dtsi	ARM: dts: add Ka-Ro tx53 devicetree	2013-06-17 16:04:18 +08:00
imx53.dtsi	ARM: imx: add ocram clock for imx53	2013-08-22 23:29:46 +08:00
integrator.dtsi
integratorap.dts	ARM: integrator: set local side PCI addresses right	2013-06-27 14:19:12 +02:00
integratorcp.dts	ARM: integrator-cp: convert use CLKSRC_OF for timer init	2013-04-11 15:11:21 -05:00
keystone.dts	ARM: Keystone: Convert device tree file to use IRQ defines	2013-08-05 14:06:24 -04:00
kirkwood-98dx4122.dtsi
kirkwood-6281.dtsi	ARM: kirkwood: Relocate PCIe device tree nodes	2013-08-06 14:11:53 +00:00
kirkwood-6282.dtsi	ARM: kirkwood: Relocate PCIe device tree nodes	2013-08-06 14:11:53 +00:00
kirkwood-cloudbox.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-db-88f6281.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-db-88f6282.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-db.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-dns320.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-dns325.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-dnskw.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-dockstar.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-dreamplug.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-goflexnet.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-guruplug-server-plus.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-ib62x0.dts	ARM: kirkwood: ib62x0: add u-boot environment partition	2013-10-03 12:52:47 +00:00
kirkwood-iconnect.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-iomega_ix2_200.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-is2.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-km_kirkwood.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-lschlv2.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-lsxhl.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-lsxl.dtsi	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-mplcec4.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-mv88f6281gtw-ge.dts	ARM: kirkwood: use dts pre-processor for mv88f6281gtw-ge	2013-08-06 16:14:14 +00:00
kirkwood-netgear_readynas_duo_v2.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-ns2-common.dtsi	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2lite.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2max.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ns2mini.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-nsa310-common.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-nsa310.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-nsa310a.dts	ARM: kirkwood: use dts pre-processor for nsa310 boards	2013-08-16 13:02:08 +00:00
kirkwood-openblocks_a6.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-sheevaplug-common.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-sheevaplug-esata.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-sheevaplug.dts	ARM: kirkwood: Use the preprocessor on device tree files	2013-08-06 14:11:37 +00:00
kirkwood-topkick.dts	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kirkwood-ts219-6281.dts	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood-ts219-6282.dts	ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding	2013-10-01 16:28:03 +00:00
kirkwood-ts219.dtsi	ARM: SoC board updates for 3.12	2013-09-06 13:34:43 -07:00
kirkwood.dtsi	ARM: kirkwood: Move the nand node under the mbus node	2013-10-01 16:36:12 +00:00
kizbox.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
lpc32xx.dtsi	ARM: dts: lpc32xx: cpus/cpu nodes dts updates	2013-05-23 10:45:13 +01:00
Makefile	mvebu dt changes for v3.13 (round 2)	2013-10-09 14:11:13 -07:00
marco-evb.dts
marco.dtsi
mmp2-brownstone.dts
mmp2.dtsi	ARM: mmp: add more compatible names in gpio driver	2013-04-11 10:00:34 +08:00
mpa1600.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
msm8660-surf.dts	ARM: dts: msm: Update uartdm compatible strings	2013-08-28 16:03:29 -07:00
msm8960-cdp.dts	TTY/Serial driver patches for 3.12-rc1	2013-09-03 11:38:36 -07:00
nspire-classic.dtsi	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire-clp.dts	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire-cx.dts	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire-tp.dts	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
nspire.dtsi	arm: Add device trees for TI-Nspire hardware	2013-06-21 20:06:29 +02:00
omap2.dtsi	Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt	2013-06-20 23:01:41 +02:00
omap3-beagle-xm.dts	ARM: dts: omap3-beagle-xm: fix string error in compatible property	2013-09-17 14:20:57 +02:00
omap3-beagle.dts	ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line	2013-06-18 18:53:45 -05:00
omap3-devkit8000.dts	Device tree updates for v3.11	2013-07-04 15:51:45 -07:00
omap3-evm.dts	ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line	2013-06-18 18:53:45 -05:00
omap3-igep0020.dts	ARM: dts: OMAP2+: Use existing constants for GPIOs	2013-06-18 18:53:38 -05:00
omap3-igep0030.dts	ARM: dts: OMAP2+: Use existing constants for GPIOs	2013-06-18 18:53:38 -05:00
omap3-igep.dtsi	ARM: dts: igep00x0: Add pinmux configuration for MCBSP2	2013-09-18 14:31:58 +02:00
omap3-overo.dtsi	ARM: dts: omap3-overo: Add default trigger for TWL4030 LED	2013-06-19 04:38:15 -05:00
omap3-tobi.dts	ARM: dts: omap3-tobi: Correct polarity for GPIO LED	2013-06-19 04:38:14 -05:00
omap3.dtsi	Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt	2013-06-20 23:01:41 +02:00
omap4-panda-a4.dts	ARM: dts: OMAP2+: Use pinctrl constants	2013-06-18 18:53:40 -05:00
omap4-panda-common.dtsi	ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard	2013-09-18 11:11:39 +02:00
omap4-panda-es.dts	ARM: dts: omap4-panda: Update the LED support for the panda	2013-06-18 18:53:40 -05:00
omap4-panda.dts	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap4-sdp-es23plus.dts	ARM: dts: OMAP2+: Use pinctrl constants	2013-06-18 18:53:40 -05:00
omap4-sdp.dts	ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze	2013-09-18 11:14:42 +02:00
omap4-var-som.dts	ARM: dts: OMAP4/5: Use existing constants for IRQs	2013-06-18 18:53:39 -05:00
omap4.dtsi	Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt	2013-06-20 23:01:41 +02:00
omap5-uevm.dts	ARM: dts: omap5-uevm: update optional/unused regulator configurations	2013-07-29 23:43:20 -07:00
omap5.dtsi	ARM: dts: OMAP5: fix ocp2scp DTS data	2013-09-17 14:57:04 +02:00
omap34xx.dtsi	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap36xx.dtsi	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap443x.dtsi	ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices	2013-06-18 18:53:46 -05:00
omap2420-h4.dts	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap2420.dtsi	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap2430.dtsi	ARM: dts: OMAP2+: Use #include for all device trees	2013-06-18 18:53:38 -05:00
omap3430-sdp.dts	ARM SoC driver specific changes	2013-07-02 14:33:21 -07:00
omap4460.dtsi	ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices	2013-06-18 18:53:46 -05:00
orion5x-lacie-ethernet-disk-mini-v2.dts	ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes	2013-07-25 20:54:10 +00:00
orion5x.dtsi	ARM: orion5x: update intc device tree node to new reg layout	2013-07-25 21:07:09 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi	ARM: dts: picoxcell: cpus/cpu nodes dts updates	2013-05-23 10:45:15 +01:00
picoxcell-pc3x3.dtsi	ARM: dts: picoxcell: cpus/cpu nodes dts updates	2013-05-23 10:45:15 +01:00
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
prima2-evb.dts
prima2.dtsi	arm/dts: sirf: fix the pingroup name mismatch between drivers and dts	2013-07-22 00:53:32 +02:00
pxa2xx.dtsi	ARM: dts: pxa2xx: cpus/cpu nodes dts updates	2013-05-23 10:45:17 +01:00
pxa3xx.dtsi	ARM: pxa: DTS: override gpio node in pxa3xx.dtsi	2013-08-13 15:51:02 -07:00
pxa27x.dtsi
pxa168-aspenite.dts
pxa168.dtsi	ARM: mmp: add more compatible names in gpio driver	2013-04-11 10:00:34 +08:00
pxa910-dkb.dts
pxa910.dtsi	ARM: mmp: add more compatible names in gpio driver	2013-04-11 10:00:34 +08:00
r8a73a4-ape6evm-reference.dts	ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards	2013-10-08 09:25:13 +09:00
r8a73a4-ape6evm.dts	ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards	2013-10-08 09:25:13 +09:00
r8a73a4.dtsi	ARM: shmobile: r8a73a4: add a DT node for the DMAC	2013-10-08 09:25:14 +09:00
r8a7740-armadillo800eva-reference.dts	ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces	2013-10-08 09:25:14 +09:00
r8a7740-armadillo800eva.dts	ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs	2013-08-06 18:07:13 +09:00
r8a7740.dtsi	ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces	2013-10-08 09:25:14 +09:00
r8a7778-bockw-reference.dts	ARM: shmobile: bockw: fixup ether node naming	2013-10-08 10:37:49 +09:00
r8a7778-bockw.dts	ARM: shmobile: Mount root file systems in r/w mode for all DT platforms	2013-08-05 16:45:33 +09:00
r8a7778.dtsi	ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSI	2013-10-08 09:25:22 +09:00
r8a7779-marzen-reference.dts	ARM: shmobile: marzen: fixup SMSC IRQ number on DTS	2013-10-08 09:25:22 +09:00
r8a7779-marzen.dts	ARM: shmobile: marzen: Add r8a7779-marzen.dtb	2013-07-30 13:27:56 +09:00
r8a7779.dtsi	ARM: shmobile: r8a7779: add irqpin default status on DTSI	2013-10-08 09:25:22 +09:00
r8a7790-lager-reference.dts	ARM: shmobile: Mount root file systems in r/w mode for all DT platforms	2013-08-05 16:45:33 +09:00
r8a7790-lager.dts	ARM: shmobile: lager: enable nfsroot in DTS	2013-08-06 18:06:20 +09:00
r8a7790.dtsi	ARM: shmobile: r8a7790: add I2C DT nodes	2013-10-08 09:25:14 +09:00
r8a7791.dtsi	ARM: shmobile: r8a7791 SMP device tree node	2013-10-08 09:25:22 +09:00
rk3066a-clocks.dtsi	arm: Add basic clocks for Rockchip rk3066a SoCs	2013-06-21 09:20:56 +02:00
rk3066a.dtsi	arm: add basic support for Rockchip RK3066a boards	2013-06-21 09:21:02 +02:00
s3c24xx.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
s3c64xx-pinctrl.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
s3c64xx.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
s3c2416-pinctrl.dtsi	ARM: dts: add devicetree support for s3c2416-smdk2416	2013-05-21 01:06:12 +09:00
s3c2416-smdk2416.dts	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
s3c2416.dtsi	ARM: dts: use #include for all device trees for Samsung	2013-06-19 03:28:40 +09:00
s3c6400.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
s3c6410-mini6410.dts	ARM: dts: Add dts file for S3C6410-based Mini6410 board	2013-09-17 06:48:29 +09:00
s3c6410-smdk6410.dts	ARM: dts: Add dts file for S3C6410-based SMDK6410 board	2013-09-17 06:48:29 +09:00
s3c6410.dtsi	ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs	2013-09-17 06:48:28 +09:00
sama5d3.dtsi	ARM: at91/dt: sama5d3xek: reduce the ROM code mapping for pmecc lookup table	2013-08-23 14:47:22 +08:00
sama5d3xcm.dtsi	ARM: at91/dt: sama5d3xek: remove the useless NFC dt parameters	2013-08-23 14:46:38 +08:00
sama5d3xdm.dtsi	ARM: at91: dt: switch to pinctrl to pre-processor	2013-05-17 12:11:39 +02:00
sama5d3xmb.dtsi	ARM: at91/dt: fix phy address in sama5xmb to match the reg property	2013-08-29 15:21:45 -04:00
sama5d31ek.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
sama5d33ek.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
sama5d34ek.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
sama5d35ek.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g-reference.dts	ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards	2013-10-08 09:25:13 +09:00
sh73a0-kzm9g.dts	ARM: shmobile: Mount root file systems in r/w mode for all DT platforms	2013-08-05 16:45:33 +09:00
sh73a0.dtsi	ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards	2013-10-08 09:25:13 +09:00
sh7372-mackerel.dts
sh7372.dtsi	ARM: shmobile: sh7372: Add pin control device to device tree	2013-07-22 10:12:36 +09:00
skeleton64.dtsi	ARM: dts: Fix memory node in skeleton64.dtsi	2013-08-07 16:33:50 +00:00
skeleton.dtsi
socfpga_cyclone5.dts	ARM: socfpga: dts: Add ethernet bindings for SOCFPGA	2013-06-11 16:34:57 -07:00
socfpga_vt.dts	ARM: socfpga: dts: Add ethernet bindings for SOCFPGA	2013-06-11 16:34:57 -07:00
socfpga.dtsi	dts: Rename DW APB timer compatible strings	2013-08-29 12:59:02 -07:00
spear3xx.dtsi	ARM: dts: spear: cpus/cpu nodes dts updates	2013-05-23 10:45:21 +01:00
spear13xx.dtsi	ARM: dts: spear: cpus/cpu nodes dts updates	2013-05-23 10:45:21 +01:00
spear300-evb.dts
spear300.dtsi
spear310-evb.dts
spear310.dtsi
spear320-evb.dts
spear320-hmi.dts
spear320.dtsi
spear600-evb.dts
spear600.dtsi	ARM: dts: spear: cpus/cpu nodes dts updates	2013-05-23 10:45:21 +01:00
spear1310-evb.dts
spear1310.dtsi
spear1340-evb.dts
spear1340.dtsi	ARM: arm-soc: late cleanups	2013-05-07 11:22:14 -07:00
st-pincfg.h	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
ste-ccu8540-pinctrl.dtsi	ARM: ux500: fix devicetree builds	2013-08-14 22:32:07 +02:00
ste-ccu8540.dts	ARM: ux500: fix devicetree builds	2013-08-14 22:32:07 +02:00
ste-ccu9540.dts	ARM: ux500: fix devicetree builds	2013-08-14 22:32:07 +02:00
ste-dbx5x0.dtsi	ARM: ux500: Provide a Device Tree node for CPUFreq in the DBx500	2013-09-26 11:09:23 +02:00
ste-href-stuib.dtsi	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-href-tvk1281618.dtsi	ARM: ux500: register the tc35892 GPIO on the TVK UIB	2013-10-03 10:18:36 +02:00
ste-href.dtsi	ARM: ux500: move TC35892 at 0x42 to hrefprev60	2013-10-02 16:17:03 +02:00
ste-hrefprev60-stuib.dts	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-hrefprev60-tvk.dts	ARM: ux500: split the HREF DTS files from two to four	2013-10-02 16:17:04 +02:00
ste-hrefprev60.dtsi	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-hrefv60plus-stuib.dts	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-hrefv60plus-tvk.dts	ARM: ux500: split the HREF DTS files from two to four	2013-10-02 16:17:04 +02:00
ste-hrefv60plus.dtsi	ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS	2013-10-03 10:29:24 +02:00
ste-nomadik-pinctrl.dtsi	ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2	2013-08-06 23:48:50 +02:00
ste-nomadik-s8815.dts	Nomadik DT and clock work:	2013-06-20 16:13:10 +02:00
ste-nomadik-stn8815.dtsi	ARM: nomadik: switch to use the Nomadik I2C driver	2013-08-07 00:59:06 +02:00
ste-snowball.dts	ARM: ux500: Enable CPUFreq on Snowball	2013-09-26 11:09:27 +02:00
ste-u300.dts	ARM: u300: switch to using syscon regmap for board	2013-06-17 13:54:39 +02:00
stih41x-b2000.dtsi	ARM: stih41x: Add B2000 board support	2013-06-25 13:42:50 -07:00
stih41x-b2020.dtsi	ARM: stih41x: Add B2020 board support	2013-06-25 13:42:51 -07:00
stih41x.dtsi	ARM: STi: Fix cpu nodes with correct device_type.	2013-08-04 13:40:48 -07:00
stih415-b2000.dts	ARM: stih41x: Add B2000 board support	2013-06-25 13:42:50 -07:00
stih415-b2020.dts	ARM: stih41x: Add B2020 board support	2013-06-25 13:42:51 -07:00
stih415-clock.dtsi	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
stih415-pinctrl.dtsi	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
stih415.dtsi	ARM: sti: Add STiH415 SOC support	2013-06-25 13:26:47 -07:00
stih416-b2000.dts	ARM: stih41x: Add B2000 board support	2013-06-25 13:42:50 -07:00
stih416-b2020.dts	ARM: stih41x: Add B2020 board support	2013-06-25 13:42:51 -07:00
stih416-clock.dtsi	ARM: sti: Add STiH416 SOC support	2013-06-25 13:26:58 -07:00
stih416-pinctrl.dtsi	ARM: dts: STi: Fix pinconf setup for STiH416 serial2	2013-07-22 19:34:55 -07:00
stih416.dtsi	ARM: dts: STi: Fix pinconf setup for STiH416 serial2	2013-07-22 19:34:55 -07:00
sun4i-a10-a1000.dts	ARM: sunxi: dt: Add device tree for Mele A1000	2013-08-14 09:59:20 +02:00
sun4i-a10-cubieboard.dts	ARM: sun4i: dt: Fix A10 SoC bus base address	2013-08-10 19:13:43 +02:00
sun4i-a10-hackberry.dts	ARM: sun4i: dt: Fix A10 SoC bus base address	2013-08-10 19:13:43 +02:00
sun4i-a10-mini-xplus.dts	ARM: sun4i: dt: Fix A10 SoC bus base address	2013-08-10 19:13:43 +02:00
sun4i-a10.dtsi	ARM: sun4i: dt: Fix A10 SoC bus base address	2013-08-10 19:13:43 +02:00
sun5i-a10s-olinuxino-micro.dts	ARM: sun5i: dt: Fix A10s SoC bus base address	2013-08-10 19:13:44 +02:00
sun5i-a10s.dtsi	ARM: sun5i: dt: Use the A10s gates in the DTSI	2013-08-26 10:51:18 +02:00
sun5i-a13-olinuxino.dts	ARM: sun5i: dt: Fix A13 SoC bus base address	2013-08-10 19:13:45 +02:00
sun5i-a13.dtsi	ARM: sun5i: dt: Fix A13 SoC bus base address	2013-08-10 19:13:45 +02:00
sun6i-a31-colombus.dts	ARM: sun6i: colombus: Add uart0 muxing	2013-08-22 00:19:17 +02:00
sun6i-a31.dtsi	ARM: sun6i: Enable clock support in the DTSI	2013-08-26 10:51:18 +02:00
sun7i-a20-cubieboard2.dts	ARM: dts: sun7i: cubieboard2: Enable the EMAC	2013-09-12 12:22:43 -07:00
sun7i-a20-olinuxino-micro.dts	ARM: dts: sun7i: olinuxino-micro: Enable the EMAC	2013-09-12 12:22:48 -07:00
sun7i-a20.dtsi	ARM: dts: sun7i: Add the muxing options for the EMAC	2013-09-12 12:22:39 -07:00
tegra20-colibri-512.dtsi	ARM: tegra: device tree changes for 3.12	2013-08-20 16:30:54 -07:00
tegra20-harmony.dts	ARM: tegra: harmony: Initialize PCIe from DT	2013-08-12 14:19:21 -06:00
tegra20-iris-512.dts	ARM: tegra: convert device tree files to use GPIO defines	2013-05-28 16:13:49 -06:00
tegra20-medcom-wide.dts	ARM: tegra20: convert device tree files to use CLK defines	2013-05-28 16:13:50 -06:00
tegra20-paz00.dts	ARM: tegra: enable LP1 suspend mode	2013-08-12 12:23:14 -06:00
tegra20-plutux.dts	ARM: tegra20: convert device tree files to use CLK defines	2013-05-28 16:13:50 -06:00
tegra20-seaboard.dts	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra20-tamonten.dtsi	ARM: tegra: tamonten: Add PCIe support	2013-08-12 14:19:12 -06:00
tegra20-tec.dts	ARM: tegra: tec: Add PCIe support	2013-08-12 14:19:16 -06:00
tegra20-trimslice.dts	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra20-ventana.dts	ARM: tegra: enable LP1 suspend mode	2013-08-12 12:23:14 -06:00
tegra20-whistler.dts	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra20.dtsi	ARM: SoC DT updates for 3.12	2013-09-06 13:26:27 -07:00
tegra30-beaver.dts	ARM: tegra: add Mic Jack to Beaver device tree	2013-08-15 09:35:07 -06:00
tegra30-cardhu-a02.dts	ARM: tegra: convert device tree files to use GPIO defines	2013-05-28 16:13:49 -06:00
tegra30-cardhu-a04.dts	ARM: tegra: convert device tree files to use GPIO defines	2013-05-28 16:13:49 -06:00
tegra30-cardhu.dtsi	ARM: tegra: add USB DT entries for Tegra30	2013-08-13 12:40:47 -06:00
tegra30.dtsi	ARM: tegra: add USB DT entries for Tegra30	2013-08-13 12:40:47 -06:00
tegra114-dalmore.dts	ARM: tegra: configure power off for Dalmore	2013-08-20 16:52:04 -07:00
tegra114.dtsi	ARM: tegra: add USB DT entries for Tegra114, Dalmore	2013-08-13 12:40:52 -06:00
tny_a9g20.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
tny_a9260_common.dtsi
tny_a9260.dts	ARM: at91: dt: use #include for all device trees	2013-05-17 11:27:49 +02:00
tny_a9263.dts	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
tps6507x.dtsi	ARM: regulator: add tps6507x device tree data	2013-04-03 09:44:51 +05:30
tps65217.dtsi
tps65910.dtsi
twl4030_omap3.dtsi	ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line	2013-06-18 18:53:45 -05:00
twl4030.dtsi	ARM: dts: Add missing vmmc2 regulator for twl	2013-07-15 01:04:05 -07:00
twl6030.dtsi	ARM: dts: twl6030: Add PWM support	2013-04-09 00:16:50 +02:00
usb_a9g20_common.dtsi	ARM: at91: dt: add Calao USB-A9G20 low power version	2013-05-31 16:52:37 +02:00
usb_a9g20_lpw.dts	ARM: at91: dt: add Calao USB-A9G20 low power version	2013-05-31 16:52:37 +02:00
usb_a9g20-dab-mmx.dtsi	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
usb_a9g20.dts	ARM: at91: dt: add Calao USB-A9G20 low power version	2013-05-31 16:52:37 +02:00
usb_a9260_common.dtsi	ARM: at91: dt: switch to standard GPIO flag defines.	2013-05-17 11:27:49 +02:00
usb_a9260.dts	ARM: at91: dt: usb-a9260: update shutdown controller	2013-05-31 16:52:35 +02:00
usb_a9263.dts	ARM: at91: dt: usb-a9263: add dataflash support	2013-05-31 16:52:36 +02:00
versatile-ab.dts	ARM: versatile: use OF init for sp804 timer	2013-04-11 15:11:21 -05:00
versatile-pb.dts
vexpress-v2m-rs1.dtsi
vexpress-v2m.dtsi
vexpress-v2p-ca5s.dts	ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms	2013-04-11 03:01:03 -07:00
vexpress-v2p-ca9.dts	ARM: dts: vexpress: disable CA9 core tile sp804 timer	2013-04-11 15:11:19 -05:00
vexpress-v2p-ca15_a7.dts	ARM: SoC late changes for v3.12	2013-09-09 16:35:29 -07:00
vexpress-v2p-ca15-tc1.dts	ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms	2013-04-11 03:01:03 -07:00
vf610-pinfunc.h	ARM: dts: add SoC level device tree source for VF610	2013-06-17 16:04:23 +08:00
vf610-twr.dts	ARM: dts: vf610-twr: enable i2c0 device	2013-08-22 23:30:05 +08:00
vf610.dtsi	ARM: imx: fix vf610 enet module clock selection	2013-07-15 08:28:09 +08:00
vt8500-bv07.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
vt8500.dtsi	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8505-ref.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8505.dtsi	dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files	2013-05-12 20:31:15 +12:00
wm8650-mid.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8650.dtsi	dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files	2013-05-12 20:31:15 +12:00
wm8750-apc8750.dts	dts: vt8500: Update serial nodes and disable by default in SoC files	2013-05-12 20:31:13 +12:00
wm8750.dtsi	dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files	2013-05-12 20:31:15 +12:00
wm8850-w70v2.dts	ARM: dts: Use the PWM polarity flags	2013-09-03 13:08:11 +02:00
wm8850.dtsi	dts: vt8500: Correct reference clock on WM8850 SoCs	2013-06-04 07:31:22 +12:00
xenvm-4.2.dts	xenvm: add a simple PSCI node and a second cpu	2013-04-25 16:46:09 +00:00
zynq-7000.dtsi	arm: zynq: dt: Set correct L2 ram latencies	2013-08-13 16:37:35 +02:00
zynq-zc702.dts	arm: dt: zynq: Use 'status' property for UART nodes	2013-06-17 10:32:39 +02:00
zynq-zc706.dts	arm: dt: zynq: Add support for the zc706 platform	2013-06-17 10:32:51 +02:00
zynq-zed.dts	arm: dt: zynq: Add support for the zed platform	2013-06-17 10:33:03 +02:00