forked from Minki/linux
796305a2e2
As devm_ioremap_resource() is used on probe, there is no need to explicitly check the return value from platform_get_resource(), as this is something that devm_ioremap_resource() takes care by itself. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
630 lines
15 KiB
C
630 lines
15 KiB
C
/*
|
|
* Freescale MXS SPI master driver
|
|
*
|
|
* Copyright 2012 DENX Software Engineering, GmbH.
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
|
|
*
|
|
* Rework and transition to new API by:
|
|
* Marek Vasut <marex@denx.de>
|
|
*
|
|
* Based on previous attempt by:
|
|
* Fabio Estevam <fabio.estevam@freescale.com>
|
|
*
|
|
* Based on code from U-Boot bootloader by:
|
|
* Marek Vasut <marex@denx.de>
|
|
*
|
|
* Based on spi-stmp.c, which is:
|
|
* Author: Dmitry Pervushin <dimka@embeddedalley.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/stmp_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/mxs-spi.h>
|
|
|
|
#define DRIVER_NAME "mxs-spi"
|
|
|
|
/* Use 10S timeout for very long transfers, it should suffice. */
|
|
#define SSP_TIMEOUT 10000
|
|
|
|
#define SG_MAXLEN 0xff00
|
|
|
|
struct mxs_spi {
|
|
struct mxs_ssp ssp;
|
|
struct completion c;
|
|
};
|
|
|
|
static int mxs_spi_setup_transfer(struct spi_device *dev,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct mxs_spi *spi = spi_master_get_devdata(dev->master);
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
uint8_t bits_per_word;
|
|
uint32_t hz = 0;
|
|
|
|
bits_per_word = dev->bits_per_word;
|
|
if (t && t->bits_per_word)
|
|
bits_per_word = t->bits_per_word;
|
|
|
|
hz = dev->max_speed_hz;
|
|
if (t && t->speed_hz)
|
|
hz = min(hz, t->speed_hz);
|
|
if (hz == 0) {
|
|
dev_err(&dev->dev, "Cannot continue with zero clock\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mxs_ssp_set_clk_rate(ssp, hz);
|
|
|
|
writel(BF_SSP_CTRL1_SSP_MODE(BV_SSP_CTRL1_SSP_MODE__SPI) |
|
|
BF_SSP_CTRL1_WORD_LENGTH
|
|
(BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS) |
|
|
((dev->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) |
|
|
((dev->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0),
|
|
ssp->base + HW_SSP_CTRL1(ssp));
|
|
|
|
writel(0x0, ssp->base + HW_SSP_CMD0);
|
|
writel(0x0, ssp->base + HW_SSP_CMD1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_spi_setup(struct spi_device *dev)
|
|
{
|
|
int err = 0;
|
|
|
|
if (!dev->bits_per_word)
|
|
dev->bits_per_word = 8;
|
|
|
|
if (dev->mode & ~(SPI_CPOL | SPI_CPHA))
|
|
return -EINVAL;
|
|
|
|
err = mxs_spi_setup_transfer(dev, NULL);
|
|
if (err) {
|
|
dev_err(&dev->dev,
|
|
"Failed to setup transfer, error = %d\n", err);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static uint32_t mxs_spi_cs_to_reg(unsigned cs)
|
|
{
|
|
uint32_t select = 0;
|
|
|
|
/*
|
|
* i.MX28 Datasheet: 17.10.1: HW_SSP_CTRL0
|
|
*
|
|
* The bits BM_SSP_CTRL0_WAIT_FOR_CMD and BM_SSP_CTRL0_WAIT_FOR_IRQ
|
|
* in HW_SSP_CTRL0 register do have multiple usage, please refer to
|
|
* the datasheet for further details. In SPI mode, they are used to
|
|
* toggle the chip-select lines (nCS pins).
|
|
*/
|
|
if (cs & 1)
|
|
select |= BM_SSP_CTRL0_WAIT_FOR_CMD;
|
|
if (cs & 2)
|
|
select |= BM_SSP_CTRL0_WAIT_FOR_IRQ;
|
|
|
|
return select;
|
|
}
|
|
|
|
static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
|
|
{
|
|
const uint32_t mask =
|
|
BM_SSP_CTRL0_WAIT_FOR_CMD | BM_SSP_CTRL0_WAIT_FOR_IRQ;
|
|
uint32_t select;
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
|
|
writel(mask, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
|
|
select = mxs_spi_cs_to_reg(cs);
|
|
writel(select, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
|
|
}
|
|
|
|
static inline void mxs_spi_enable(struct mxs_spi *spi)
|
|
{
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
|
|
writel(BM_SSP_CTRL0_LOCK_CS,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
|
|
writel(BM_SSP_CTRL0_IGNORE_CRC,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
|
|
}
|
|
|
|
static inline void mxs_spi_disable(struct mxs_spi *spi)
|
|
{
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
|
|
writel(BM_SSP_CTRL0_LOCK_CS,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
|
|
writel(BM_SSP_CTRL0_IGNORE_CRC,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
|
|
}
|
|
|
|
static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
|
|
{
|
|
const unsigned long timeout = jiffies + msecs_to_jiffies(SSP_TIMEOUT);
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
uint32_t reg;
|
|
|
|
do {
|
|
reg = readl_relaxed(ssp->base + offset);
|
|
|
|
if (!set)
|
|
reg = ~reg;
|
|
|
|
reg &= mask;
|
|
|
|
if (reg == mask)
|
|
return 0;
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void mxs_ssp_dma_irq_callback(void *param)
|
|
{
|
|
struct mxs_spi *spi = param;
|
|
complete(&spi->c);
|
|
}
|
|
|
|
static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct mxs_ssp *ssp = dev_id;
|
|
dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n",
|
|
__func__, __LINE__,
|
|
readl(ssp->base + HW_SSP_CTRL1(ssp)),
|
|
readl(ssp->base + HW_SSP_STATUS(ssp)));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
|
|
unsigned char *buf, int len,
|
|
int *first, int *last, int write)
|
|
{
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
struct dma_async_tx_descriptor *desc = NULL;
|
|
const bool vmalloced_buf = is_vmalloc_addr(buf);
|
|
const int desc_len = vmalloced_buf ? PAGE_SIZE : SG_MAXLEN;
|
|
const int sgs = DIV_ROUND_UP(len, desc_len);
|
|
int sg_count;
|
|
int min, ret;
|
|
uint32_t ctrl0;
|
|
struct page *vm_page;
|
|
void *sg_buf;
|
|
struct {
|
|
uint32_t pio[4];
|
|
struct scatterlist sg;
|
|
} *dma_xfer;
|
|
|
|
if (!len)
|
|
return -EINVAL;
|
|
|
|
dma_xfer = kzalloc(sizeof(*dma_xfer) * sgs, GFP_KERNEL);
|
|
if (!dma_xfer)
|
|
return -ENOMEM;
|
|
|
|
INIT_COMPLETION(spi->c);
|
|
|
|
ctrl0 = readl(ssp->base + HW_SSP_CTRL0);
|
|
ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
|
|
ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs);
|
|
|
|
if (*first)
|
|
ctrl0 |= BM_SSP_CTRL0_LOCK_CS;
|
|
if (!write)
|
|
ctrl0 |= BM_SSP_CTRL0_READ;
|
|
|
|
/* Queue the DMA data transfer. */
|
|
for (sg_count = 0; sg_count < sgs; sg_count++) {
|
|
min = min(len, desc_len);
|
|
|
|
/* Prepare the transfer descriptor. */
|
|
if ((sg_count + 1 == sgs) && *last)
|
|
ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC;
|
|
|
|
if (ssp->devid == IMX23_SSP) {
|
|
ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
|
|
ctrl0 |= min;
|
|
}
|
|
|
|
dma_xfer[sg_count].pio[0] = ctrl0;
|
|
dma_xfer[sg_count].pio[3] = min;
|
|
|
|
if (vmalloced_buf) {
|
|
vm_page = vmalloc_to_page(buf);
|
|
if (!vm_page) {
|
|
ret = -ENOMEM;
|
|
goto err_vmalloc;
|
|
}
|
|
sg_buf = page_address(vm_page) +
|
|
((size_t)buf & ~PAGE_MASK);
|
|
} else {
|
|
sg_buf = buf;
|
|
}
|
|
|
|
sg_init_one(&dma_xfer[sg_count].sg, sg_buf, min);
|
|
ret = dma_map_sg(ssp->dev, &dma_xfer[sg_count].sg, 1,
|
|
write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
|
|
|
|
len -= min;
|
|
buf += min;
|
|
|
|
/* Queue the PIO register write transfer. */
|
|
desc = dmaengine_prep_slave_sg(ssp->dmach,
|
|
(struct scatterlist *)dma_xfer[sg_count].pio,
|
|
(ssp->devid == IMX23_SSP) ? 1 : 4,
|
|
DMA_TRANS_NONE,
|
|
sg_count ? DMA_PREP_INTERRUPT : 0);
|
|
if (!desc) {
|
|
dev_err(ssp->dev,
|
|
"Failed to get PIO reg. write descriptor.\n");
|
|
ret = -EINVAL;
|
|
goto err_mapped;
|
|
}
|
|
|
|
desc = dmaengine_prep_slave_sg(ssp->dmach,
|
|
&dma_xfer[sg_count].sg, 1,
|
|
write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
|
|
if (!desc) {
|
|
dev_err(ssp->dev,
|
|
"Failed to get DMA data write descriptor.\n");
|
|
ret = -EINVAL;
|
|
goto err_mapped;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The last descriptor must have this callback,
|
|
* to finish the DMA transaction.
|
|
*/
|
|
desc->callback = mxs_ssp_dma_irq_callback;
|
|
desc->callback_param = spi;
|
|
|
|
/* Start the transfer. */
|
|
dmaengine_submit(desc);
|
|
dma_async_issue_pending(ssp->dmach);
|
|
|
|
ret = wait_for_completion_timeout(&spi->c,
|
|
msecs_to_jiffies(SSP_TIMEOUT));
|
|
if (!ret) {
|
|
dev_err(ssp->dev, "DMA transfer timeout\n");
|
|
ret = -ETIMEDOUT;
|
|
dmaengine_terminate_all(ssp->dmach);
|
|
goto err_vmalloc;
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
err_vmalloc:
|
|
while (--sg_count >= 0) {
|
|
err_mapped:
|
|
dma_unmap_sg(ssp->dev, &dma_xfer[sg_count].sg, 1,
|
|
write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
|
|
}
|
|
|
|
kfree(dma_xfer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
|
|
unsigned char *buf, int len,
|
|
int *first, int *last, int write)
|
|
{
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
|
|
if (*first)
|
|
mxs_spi_enable(spi);
|
|
|
|
mxs_spi_set_cs(spi, cs);
|
|
|
|
while (len--) {
|
|
if (*last && len == 0)
|
|
mxs_spi_disable(spi);
|
|
|
|
if (ssp->devid == IMX23_SSP) {
|
|
writel(BM_SSP_CTRL0_XFER_COUNT,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
|
|
writel(1,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
|
|
} else {
|
|
writel(1, ssp->base + HW_SSP_XFER_SIZE);
|
|
}
|
|
|
|
if (write)
|
|
writel(BM_SSP_CTRL0_READ,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
|
|
else
|
|
writel(BM_SSP_CTRL0_READ,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
|
|
|
|
writel(BM_SSP_CTRL0_RUN,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
|
|
|
|
if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 1))
|
|
return -ETIMEDOUT;
|
|
|
|
if (write)
|
|
writel(*buf, ssp->base + HW_SSP_DATA(ssp));
|
|
|
|
writel(BM_SSP_CTRL0_DATA_XFER,
|
|
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
|
|
|
|
if (!write) {
|
|
if (mxs_ssp_wait(spi, HW_SSP_STATUS(ssp),
|
|
BM_SSP_STATUS_FIFO_EMPTY, 0))
|
|
return -ETIMEDOUT;
|
|
|
|
*buf = (readl(ssp->base + HW_SSP_DATA(ssp)) & 0xff);
|
|
}
|
|
|
|
if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 0))
|
|
return -ETIMEDOUT;
|
|
|
|
buf++;
|
|
}
|
|
|
|
if (len <= 0)
|
|
return 0;
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int mxs_spi_transfer_one(struct spi_master *master,
|
|
struct spi_message *m)
|
|
{
|
|
struct mxs_spi *spi = spi_master_get_devdata(master);
|
|
struct mxs_ssp *ssp = &spi->ssp;
|
|
int first, last;
|
|
struct spi_transfer *t, *tmp_t;
|
|
int status = 0;
|
|
int cs;
|
|
|
|
first = last = 0;
|
|
|
|
cs = m->spi->chip_select;
|
|
|
|
list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) {
|
|
|
|
status = mxs_spi_setup_transfer(m->spi, t);
|
|
if (status)
|
|
break;
|
|
|
|
if (&t->transfer_list == m->transfers.next)
|
|
first = 1;
|
|
if (&t->transfer_list == m->transfers.prev)
|
|
last = 1;
|
|
if ((t->rx_buf && t->tx_buf) || (t->rx_dma && t->tx_dma)) {
|
|
dev_err(ssp->dev,
|
|
"Cannot send and receive simultaneously\n");
|
|
status = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Small blocks can be transfered via PIO.
|
|
* Measured by empiric means:
|
|
*
|
|
* dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
|
|
*
|
|
* DMA only: 2.164808 seconds, 473.0KB/s
|
|
* Combined: 1.676276 seconds, 610.9KB/s
|
|
*/
|
|
if (t->len < 32) {
|
|
writel(BM_SSP_CTRL1_DMA_ENABLE,
|
|
ssp->base + HW_SSP_CTRL1(ssp) +
|
|
STMP_OFFSET_REG_CLR);
|
|
|
|
if (t->tx_buf)
|
|
status = mxs_spi_txrx_pio(spi, cs,
|
|
(void *)t->tx_buf,
|
|
t->len, &first, &last, 1);
|
|
if (t->rx_buf)
|
|
status = mxs_spi_txrx_pio(spi, cs,
|
|
t->rx_buf, t->len,
|
|
&first, &last, 0);
|
|
} else {
|
|
writel(BM_SSP_CTRL1_DMA_ENABLE,
|
|
ssp->base + HW_SSP_CTRL1(ssp) +
|
|
STMP_OFFSET_REG_SET);
|
|
|
|
if (t->tx_buf)
|
|
status = mxs_spi_txrx_dma(spi, cs,
|
|
(void *)t->tx_buf, t->len,
|
|
&first, &last, 1);
|
|
if (t->rx_buf)
|
|
status = mxs_spi_txrx_dma(spi, cs,
|
|
t->rx_buf, t->len,
|
|
&first, &last, 0);
|
|
}
|
|
|
|
if (status) {
|
|
stmp_reset_block(ssp->base);
|
|
break;
|
|
}
|
|
|
|
m->actual_length += t->len;
|
|
first = last = 0;
|
|
}
|
|
|
|
m->status = status;
|
|
spi_finalize_current_message(master);
|
|
|
|
return status;
|
|
}
|
|
|
|
static const struct of_device_id mxs_spi_dt_ids[] = {
|
|
{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
|
|
{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxs_spi_dt_ids);
|
|
|
|
static int mxs_spi_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(mxs_spi_dt_ids, &pdev->dev);
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct spi_master *master;
|
|
struct mxs_spi *spi;
|
|
struct mxs_ssp *ssp;
|
|
struct resource *iores;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
int devid, clk_freq;
|
|
int ret = 0, irq_err;
|
|
|
|
/*
|
|
* Default clock speed for the SPI core. 160MHz seems to
|
|
* work reasonably well with most SPI flashes, so use this
|
|
* as a default. Override with "clock-frequency" DT prop.
|
|
*/
|
|
const int clk_freq_default = 160000000;
|
|
|
|
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq_err = platform_get_irq(pdev, 0);
|
|
if (irq_err < 0)
|
|
return -EINVAL;
|
|
|
|
base = devm_ioremap_resource(&pdev->dev, iores);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
|
|
devid = (enum mxs_ssp_id) of_id->data;
|
|
ret = of_property_read_u32(np, "clock-frequency",
|
|
&clk_freq);
|
|
if (ret)
|
|
clk_freq = clk_freq_default;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*spi));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
master->transfer_one_message = mxs_spi_transfer_one;
|
|
master->setup = mxs_spi_setup;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8);
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA;
|
|
master->num_chipselect = 3;
|
|
master->dev.of_node = np;
|
|
master->flags = SPI_MASTER_HALF_DUPLEX;
|
|
|
|
spi = spi_master_get_devdata(master);
|
|
ssp = &spi->ssp;
|
|
ssp->dev = &pdev->dev;
|
|
ssp->clk = clk;
|
|
ssp->base = base;
|
|
ssp->devid = devid;
|
|
|
|
init_completion(&spi->c);
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0,
|
|
DRIVER_NAME, ssp);
|
|
if (ret)
|
|
goto out_master_free;
|
|
|
|
ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
|
|
if (!ssp->dmach) {
|
|
dev_err(ssp->dev, "Failed to request DMA\n");
|
|
ret = -ENODEV;
|
|
goto out_master_free;
|
|
}
|
|
|
|
ret = clk_prepare_enable(ssp->clk);
|
|
if (ret)
|
|
goto out_dma_release;
|
|
|
|
clk_set_rate(ssp->clk, clk_freq);
|
|
ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
|
|
|
|
ret = stmp_reset_block(ssp->base);
|
|
if (ret)
|
|
goto out_disable_clk;
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
ret = spi_register_master(master);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
|
|
goto out_disable_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_disable_clk:
|
|
clk_disable_unprepare(ssp->clk);
|
|
out_dma_release:
|
|
dma_release_channel(ssp->dmach);
|
|
out_master_free:
|
|
spi_master_put(master);
|
|
return ret;
|
|
}
|
|
|
|
static int mxs_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct mxs_spi *spi;
|
|
struct mxs_ssp *ssp;
|
|
|
|
master = spi_master_get(platform_get_drvdata(pdev));
|
|
spi = spi_master_get_devdata(master);
|
|
ssp = &spi->ssp;
|
|
|
|
spi_unregister_master(master);
|
|
clk_disable_unprepare(ssp->clk);
|
|
dma_release_channel(ssp->dmach);
|
|
spi_master_put(master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mxs_spi_driver = {
|
|
.probe = mxs_spi_probe,
|
|
.remove = mxs_spi_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = mxs_spi_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mxs_spi_driver);
|
|
|
|
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
|
|
MODULE_DESCRIPTION("MXS SPI master driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:mxs-spi");
|