forked from Minki/linux
787799a9d5
The 6390X family has 8 SERDES interfaces. This allows ports 9 and 10 to support up to 10Gbps using 4 SERDES interfaces. However, when lower speeds are used, which need fewer SERDES interfaces, the unused SERDES interfaces can be used by ports 2-8. The hardware defaults to ports 9 and 10 having all 4 SERDES interfaces assigned to them. This only gets changed when the interface is configured after what the SFP supports has been determined, or the 10G PHY completes auto-neg. For hardware designs which limit ports 9 and 10 to one or two SERDES interfaces, and place SFPs on the lower interfaces, this is too late. Those ports with SFP should not wait until ports 9/10 are up in order to get access to the SERDES interface. So change the default configuration when the driver is initialised. Configure ports 9 and 10 to 1000BaseX, so they use a single SERDES interface, freeing up the others. They can steal them back if they need them. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| b53 | ||
| microchip | ||
| mv88e6xxx | ||
| bcm_sf2_cfp.c | ||
| bcm_sf2_regs.h | ||
| bcm_sf2.c | ||
| bcm_sf2.h | ||
| dsa_loop_bdinfo.c | ||
| dsa_loop.c | ||
| dsa_loop.h | ||
| Kconfig | ||
| lan9303_i2c.c | ||
| lan9303_mdio.c | ||
| lan9303-core.c | ||
| lan9303.h | ||
| lantiq_gswip.c | ||
| lantiq_pce.h | ||
| Makefile | ||
| mt7530.c | ||
| mt7530.h | ||
| mv88e6060.c | ||
| mv88e6060.h | ||
| qca8k.c | ||
| qca8k.h | ||
| realtek-smi.c | ||
| realtek-smi.h | ||
| rtl8366.c | ||
| rtl8366rb.c | ||
| vitesse-vsc73xx.c | ||