forked from Minki/linux
38669e045d
This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-dvi driver - clock generators control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
206 lines
4.7 KiB
C
206 lines
4.7 KiB
C
/*
|
|
* Versatile Express Core Tile Cortex A9x4 Support
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/clcd.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/vexpress.h>
|
|
|
|
#include <asm/hardware/arm_timer.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <asm/hardware/gic.h>
|
|
#include <asm/smp_scu.h>
|
|
#include <asm/smp_twd.h>
|
|
|
|
#include <mach/ct-ca9x4.h>
|
|
|
|
#include <asm/hardware/timer-sp.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "core.h"
|
|
|
|
#include <mach/motherboard.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#include <plat/clcd.h>
|
|
|
|
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
|
|
{
|
|
.virtual = V2T_PERIPH,
|
|
.pfn = __phys_to_pfn(CT_CA9X4_MPIC),
|
|
.length = SZ_8K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static void __init ct_ca9x4_map_io(void)
|
|
{
|
|
iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
|
|
}
|
|
|
|
#ifdef CONFIG_HAVE_ARM_TWD
|
|
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
|
|
|
|
static void __init ca9x4_twd_init(void)
|
|
{
|
|
int err = twd_local_timer_register(&twd_local_timer);
|
|
if (err)
|
|
pr_err("twd_local_timer_register failed %d\n", err);
|
|
}
|
|
#else
|
|
#define ca9x4_twd_init() do {} while(0)
|
|
#endif
|
|
|
|
static void __init ct_ca9x4_init_irq(void)
|
|
{
|
|
gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
|
|
ioremap(A9_MPCORE_GIC_CPU, SZ_256));
|
|
ca9x4_twd_init();
|
|
}
|
|
|
|
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
|
|
{
|
|
unsigned long framesize = 1024 * 768 * 2;
|
|
|
|
fb->panel = versatile_clcd_get_panel("XVGA");
|
|
if (!fb->panel)
|
|
return -EINVAL;
|
|
|
|
return versatile_clcd_setup_dma(fb, framesize);
|
|
}
|
|
|
|
static struct clcd_board ct_ca9x4_clcd_data = {
|
|
.name = "CT-CA9X4",
|
|
.caps = CLCD_CAP_5551 | CLCD_CAP_565,
|
|
.check = clcdfb_check,
|
|
.decode = clcdfb_decode,
|
|
.setup = ct_ca9x4_clcd_setup,
|
|
.mmap = versatile_clcd_mmap_dma,
|
|
.remove = versatile_clcd_remove_dma,
|
|
};
|
|
|
|
static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
|
|
static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
|
|
static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
|
|
static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
|
|
|
|
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
|
|
&clcd_device,
|
|
&dmc_device,
|
|
&smc_device,
|
|
&gpio_device,
|
|
};
|
|
|
|
static struct resource pmu_resources[] = {
|
|
[0] = {
|
|
.start = IRQ_CT_CA9X4_PMU_CPU0,
|
|
.end = IRQ_CT_CA9X4_PMU_CPU0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_CT_CA9X4_PMU_CPU1,
|
|
.end = IRQ_CT_CA9X4_PMU_CPU1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = IRQ_CT_CA9X4_PMU_CPU2,
|
|
.end = IRQ_CT_CA9X4_PMU_CPU2,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.start = IRQ_CT_CA9X4_PMU_CPU3,
|
|
.end = IRQ_CT_CA9X4_PMU_CPU3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device pmu_device = {
|
|
.name = "arm-pmu",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(pmu_resources),
|
|
.resource = pmu_resources,
|
|
};
|
|
|
|
static struct platform_device osc1_device = {
|
|
.name = "vexpress-osc",
|
|
.id = 1,
|
|
.num_resources = 1,
|
|
.resource = (struct resource []) {
|
|
VEXPRESS_RES_FUNC(0xf, 1),
|
|
},
|
|
};
|
|
|
|
static void __init ct_ca9x4_init(void)
|
|
{
|
|
int i;
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
|
|
|
|
/* set RAM latencies to 1 cycle for this core tile. */
|
|
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
|
|
writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
|
|
|
|
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
|
|
#endif
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
|
|
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
|
|
|
|
platform_device_register(&pmu_device);
|
|
platform_device_register(&osc1_device);
|
|
|
|
WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev),
|
|
NULL, "ct:clcd"));
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void *ct_ca9x4_scu_base __initdata;
|
|
|
|
static void __init ct_ca9x4_init_cpu_map(void)
|
|
{
|
|
int i, ncores;
|
|
|
|
ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
|
|
if (WARN_ON(!ct_ca9x4_scu_base))
|
|
return;
|
|
|
|
ncores = scu_get_core_count(ct_ca9x4_scu_base);
|
|
|
|
if (ncores > nr_cpu_ids) {
|
|
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
|
|
ncores, nr_cpu_ids);
|
|
ncores = nr_cpu_ids;
|
|
}
|
|
|
|
for (i = 0; i < ncores; ++i)
|
|
set_cpu_possible(i, true);
|
|
|
|
set_smp_cross_call(gic_raise_softirq);
|
|
}
|
|
|
|
static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
|
|
{
|
|
scu_enable(ct_ca9x4_scu_base);
|
|
}
|
|
#endif
|
|
|
|
struct ct_desc ct_ca9x4_desc __initdata = {
|
|
.id = V2M_CT_ID_CA9,
|
|
.name = "CA9x4",
|
|
.map_io = ct_ca9x4_map_io,
|
|
.init_irq = ct_ca9x4_init_irq,
|
|
.init_tile = ct_ca9x4_init,
|
|
#ifdef CONFIG_SMP
|
|
.init_cpu_map = ct_ca9x4_init_cpu_map,
|
|
.smp_enable = ct_ca9x4_smp_enable,
|
|
#endif
|
|
};
|