forked from Minki/linux
0fbebed682
If our first THP installation for an MM is via the set_pmd_at() done during khugepaged's collapsing we'll end up in tsb_grow() trying to do a GFP_KERNEL allocation with several locks held. Simply using GFP_ATOMIC in this situation is not the best option because we really can't have this fail, so we'd really like to keep this an order 0 GFP_KERNEL allocation if possible. Also, doing the TSB allocation from khugepaged is a really bad idea because we'll allocate it potentially from the wrong NUMA node in that context. So what we do is defer the hugepage TSB allocation until the first TLB miss we take on a hugepage. This is slightly tricky because we have to handle two unusual cases: 1) Taking the first hugepage TLB miss in the window trap handler. We'll call the winfix_trampoline when that is detected. 2) An initial TSB allocation via TLB miss races with a hugetlb fault on another cpu running the same MM. We handle this by unconditionally loading the TSB we see into the current cpu even if it's non-NULL at hugetlb_setup time. Reported-by: Meelis Roos <mroos@ut.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
528 lines
13 KiB
C
528 lines
13 KiB
C
/*
|
|
* arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
|
|
*
|
|
* Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
|
|
* Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
|
|
*/
|
|
|
|
#include <asm/head.h>
|
|
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/mman.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/perf_event.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kprobes.h>
|
|
#include <linux/kdebug.h>
|
|
#include <linux/percpu.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/openprom.h>
|
|
#include <asm/oplib.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/asi.h>
|
|
#include <asm/lsu.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/mmu_context.h>
|
|
|
|
int show_unhandled_signals = 1;
|
|
|
|
static inline __kprobes int notify_page_fault(struct pt_regs *regs)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* kprobe_running() needs smp_processor_id() */
|
|
if (kprobes_built_in() && !user_mode(regs)) {
|
|
preempt_disable();
|
|
if (kprobe_running() && kprobe_fault_handler(regs, 0))
|
|
ret = 1;
|
|
preempt_enable();
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void __kprobes unhandled_fault(unsigned long address,
|
|
struct task_struct *tsk,
|
|
struct pt_regs *regs)
|
|
{
|
|
if ((unsigned long) address < PAGE_SIZE) {
|
|
printk(KERN_ALERT "Unable to handle kernel NULL "
|
|
"pointer dereference\n");
|
|
} else {
|
|
printk(KERN_ALERT "Unable to handle kernel paging request "
|
|
"at virtual address %016lx\n", (unsigned long)address);
|
|
}
|
|
printk(KERN_ALERT "tsk->{mm,active_mm}->context = %016lx\n",
|
|
(tsk->mm ?
|
|
CTX_HWBITS(tsk->mm->context) :
|
|
CTX_HWBITS(tsk->active_mm->context)));
|
|
printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %016lx\n",
|
|
(tsk->mm ? (unsigned long) tsk->mm->pgd :
|
|
(unsigned long) tsk->active_mm->pgd));
|
|
die_if_kernel("Oops", regs);
|
|
}
|
|
|
|
static void __kprobes bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr)
|
|
{
|
|
printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
|
|
regs->tpc);
|
|
printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]);
|
|
printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]);
|
|
printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr);
|
|
dump_stack();
|
|
unhandled_fault(regs->tpc, current, regs);
|
|
}
|
|
|
|
/*
|
|
* We now make sure that mmap_sem is held in all paths that call
|
|
* this. Additionally, to prevent kswapd from ripping ptes from
|
|
* under us, raise interrupts around the time that we look at the
|
|
* pte, kswapd will have to wait to get his smp ipi response from
|
|
* us. vmtruncate likewise. This saves us having to get pte lock.
|
|
*/
|
|
static unsigned int get_user_insn(unsigned long tpc)
|
|
{
|
|
pgd_t *pgdp = pgd_offset(current->mm, tpc);
|
|
pud_t *pudp;
|
|
pmd_t *pmdp;
|
|
pte_t *ptep, pte;
|
|
unsigned long pa;
|
|
u32 insn = 0;
|
|
unsigned long pstate;
|
|
|
|
if (pgd_none(*pgdp))
|
|
goto outret;
|
|
pudp = pud_offset(pgdp, tpc);
|
|
if (pud_none(*pudp))
|
|
goto outret;
|
|
pmdp = pmd_offset(pudp, tpc);
|
|
if (pmd_none(*pmdp))
|
|
goto outret;
|
|
|
|
/* This disables preemption for us as well. */
|
|
__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
|
|
__asm__ __volatile__("wrpr %0, %1, %%pstate"
|
|
: : "r" (pstate), "i" (PSTATE_IE));
|
|
ptep = pte_offset_map(pmdp, tpc);
|
|
pte = *ptep;
|
|
if (!pte_present(pte))
|
|
goto out;
|
|
|
|
pa = (pte_pfn(pte) << PAGE_SHIFT);
|
|
pa += (tpc & ~PAGE_MASK);
|
|
|
|
/* Use phys bypass so we don't pollute dtlb/dcache. */
|
|
__asm__ __volatile__("lduwa [%1] %2, %0"
|
|
: "=r" (insn)
|
|
: "r" (pa), "i" (ASI_PHYS_USE_EC));
|
|
|
|
out:
|
|
pte_unmap(ptep);
|
|
__asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate));
|
|
outret:
|
|
return insn;
|
|
}
|
|
|
|
static inline void
|
|
show_signal_msg(struct pt_regs *regs, int sig, int code,
|
|
unsigned long address, struct task_struct *tsk)
|
|
{
|
|
if (!unhandled_signal(tsk, sig))
|
|
return;
|
|
|
|
if (!printk_ratelimit())
|
|
return;
|
|
|
|
printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
|
|
task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
|
|
tsk->comm, task_pid_nr(tsk), address,
|
|
(void *)regs->tpc, (void *)regs->u_regs[UREG_I7],
|
|
(void *)regs->u_regs[UREG_FP], code);
|
|
|
|
print_vma_addr(KERN_CONT " in ", regs->tpc);
|
|
|
|
printk(KERN_CONT "\n");
|
|
}
|
|
|
|
static void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
|
|
unsigned int insn, int fault_code)
|
|
{
|
|
unsigned long addr;
|
|
siginfo_t info;
|
|
|
|
info.si_code = code;
|
|
info.si_signo = sig;
|
|
info.si_errno = 0;
|
|
if (fault_code & FAULT_CODE_ITLB)
|
|
addr = regs->tpc;
|
|
else
|
|
addr = compute_effective_address(regs, insn, 0);
|
|
info.si_addr = (void __user *) addr;
|
|
info.si_trapno = 0;
|
|
|
|
if (unlikely(show_unhandled_signals))
|
|
show_signal_msg(regs, sig, code, addr, current);
|
|
|
|
force_sig_info(sig, &info, current);
|
|
}
|
|
|
|
extern int handle_ldf_stq(u32, struct pt_regs *);
|
|
extern int handle_ld_nf(u32, struct pt_regs *);
|
|
|
|
static unsigned int get_fault_insn(struct pt_regs *regs, unsigned int insn)
|
|
{
|
|
if (!insn) {
|
|
if (!regs->tpc || (regs->tpc & 0x3))
|
|
return 0;
|
|
if (regs->tstate & TSTATE_PRIV) {
|
|
insn = *(unsigned int *) regs->tpc;
|
|
} else {
|
|
insn = get_user_insn(regs->tpc);
|
|
}
|
|
}
|
|
return insn;
|
|
}
|
|
|
|
static void __kprobes do_kernel_fault(struct pt_regs *regs, int si_code,
|
|
int fault_code, unsigned int insn,
|
|
unsigned long address)
|
|
{
|
|
unsigned char asi = ASI_P;
|
|
|
|
if ((!insn) && (regs->tstate & TSTATE_PRIV))
|
|
goto cannot_handle;
|
|
|
|
/* If user insn could be read (thus insn is zero), that
|
|
* is fine. We will just gun down the process with a signal
|
|
* in that case.
|
|
*/
|
|
|
|
if (!(fault_code & (FAULT_CODE_WRITE|FAULT_CODE_ITLB)) &&
|
|
(insn & 0xc0800000) == 0xc0800000) {
|
|
if (insn & 0x2000)
|
|
asi = (regs->tstate >> 24);
|
|
else
|
|
asi = (insn >> 5);
|
|
if ((asi & 0xf2) == 0x82) {
|
|
if (insn & 0x1000000) {
|
|
handle_ldf_stq(insn, regs);
|
|
} else {
|
|
/* This was a non-faulting load. Just clear the
|
|
* destination register(s) and continue with the next
|
|
* instruction. -jj
|
|
*/
|
|
handle_ld_nf(insn, regs);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Is this in ex_table? */
|
|
if (regs->tstate & TSTATE_PRIV) {
|
|
const struct exception_table_entry *entry;
|
|
|
|
entry = search_exception_tables(regs->tpc);
|
|
if (entry) {
|
|
regs->tpc = entry->fixup;
|
|
regs->tnpc = regs->tpc + 4;
|
|
return;
|
|
}
|
|
} else {
|
|
/* The si_code was set to make clear whether
|
|
* this was a SEGV_MAPERR or SEGV_ACCERR fault.
|
|
*/
|
|
do_fault_siginfo(si_code, SIGSEGV, regs, insn, fault_code);
|
|
return;
|
|
}
|
|
|
|
cannot_handle:
|
|
unhandled_fault (address, current, regs);
|
|
}
|
|
|
|
static void noinline __kprobes bogus_32bit_fault_tpc(struct pt_regs *regs)
|
|
{
|
|
static int times;
|
|
|
|
if (times++ < 10)
|
|
printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports "
|
|
"64-bit TPC [%lx]\n",
|
|
current->comm, current->pid,
|
|
regs->tpc);
|
|
show_regs(regs);
|
|
}
|
|
|
|
static void noinline __kprobes bogus_32bit_fault_address(struct pt_regs *regs,
|
|
unsigned long addr)
|
|
{
|
|
static int times;
|
|
|
|
if (times++ < 10)
|
|
printk(KERN_ERR "FAULT[%s:%d]: 32-bit process "
|
|
"reports 64-bit fault address [%lx]\n",
|
|
current->comm, current->pid, addr);
|
|
show_regs(regs);
|
|
}
|
|
|
|
asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
|
|
{
|
|
struct mm_struct *mm = current->mm;
|
|
struct vm_area_struct *vma;
|
|
unsigned int insn = 0;
|
|
int si_code, fault_code, fault;
|
|
unsigned long address, mm_rss;
|
|
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
|
|
|
|
fault_code = get_thread_fault_code();
|
|
|
|
if (notify_page_fault(regs))
|
|
return;
|
|
|
|
si_code = SEGV_MAPERR;
|
|
address = current_thread_info()->fault_address;
|
|
|
|
if ((fault_code & FAULT_CODE_ITLB) &&
|
|
(fault_code & FAULT_CODE_DTLB))
|
|
BUG();
|
|
|
|
if (test_thread_flag(TIF_32BIT)) {
|
|
if (!(regs->tstate & TSTATE_PRIV)) {
|
|
if (unlikely((regs->tpc >> 32) != 0)) {
|
|
bogus_32bit_fault_tpc(regs);
|
|
goto intr_or_no_mm;
|
|
}
|
|
}
|
|
if (unlikely((address >> 32) != 0)) {
|
|
bogus_32bit_fault_address(regs, address);
|
|
goto intr_or_no_mm;
|
|
}
|
|
}
|
|
|
|
if (regs->tstate & TSTATE_PRIV) {
|
|
unsigned long tpc = regs->tpc;
|
|
|
|
/* Sanity check the PC. */
|
|
if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) ||
|
|
(tpc >= MODULES_VADDR && tpc < MODULES_END)) {
|
|
/* Valid, no problems... */
|
|
} else {
|
|
bad_kernel_pc(regs, address);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we're in an interrupt or have no user
|
|
* context, we must not take the fault..
|
|
*/
|
|
if (in_atomic() || !mm)
|
|
goto intr_or_no_mm;
|
|
|
|
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
|
|
|
|
if (!down_read_trylock(&mm->mmap_sem)) {
|
|
if ((regs->tstate & TSTATE_PRIV) &&
|
|
!search_exception_tables(regs->tpc)) {
|
|
insn = get_fault_insn(regs, insn);
|
|
goto handle_kernel_fault;
|
|
}
|
|
|
|
retry:
|
|
down_read(&mm->mmap_sem);
|
|
}
|
|
|
|
vma = find_vma(mm, address);
|
|
if (!vma)
|
|
goto bad_area;
|
|
|
|
/* Pure DTLB misses do not tell us whether the fault causing
|
|
* load/store/atomic was a write or not, it only says that there
|
|
* was no match. So in such a case we (carefully) read the
|
|
* instruction to try and figure this out. It's an optimization
|
|
* so it's ok if we can't do this.
|
|
*
|
|
* Special hack, window spill/fill knows the exact fault type.
|
|
*/
|
|
if (((fault_code &
|
|
(FAULT_CODE_DTLB | FAULT_CODE_WRITE | FAULT_CODE_WINFIXUP)) == FAULT_CODE_DTLB) &&
|
|
(vma->vm_flags & VM_WRITE) != 0) {
|
|
insn = get_fault_insn(regs, 0);
|
|
if (!insn)
|
|
goto continue_fault;
|
|
/* All loads, stores and atomics have bits 30 and 31 both set
|
|
* in the instruction. Bit 21 is set in all stores, but we
|
|
* have to avoid prefetches which also have bit 21 set.
|
|
*/
|
|
if ((insn & 0xc0200000) == 0xc0200000 &&
|
|
(insn & 0x01780000) != 0x01680000) {
|
|
/* Don't bother updating thread struct value,
|
|
* because update_mmu_cache only cares which tlb
|
|
* the access came from.
|
|
*/
|
|
fault_code |= FAULT_CODE_WRITE;
|
|
}
|
|
}
|
|
continue_fault:
|
|
|
|
if (vma->vm_start <= address)
|
|
goto good_area;
|
|
if (!(vma->vm_flags & VM_GROWSDOWN))
|
|
goto bad_area;
|
|
if (!(fault_code & FAULT_CODE_WRITE)) {
|
|
/* Non-faulting loads shouldn't expand stack. */
|
|
insn = get_fault_insn(regs, insn);
|
|
if ((insn & 0xc0800000) == 0xc0800000) {
|
|
unsigned char asi;
|
|
|
|
if (insn & 0x2000)
|
|
asi = (regs->tstate >> 24);
|
|
else
|
|
asi = (insn >> 5);
|
|
if ((asi & 0xf2) == 0x82)
|
|
goto bad_area;
|
|
}
|
|
}
|
|
if (expand_stack(vma, address))
|
|
goto bad_area;
|
|
/*
|
|
* Ok, we have a good vm_area for this memory access, so
|
|
* we can handle it..
|
|
*/
|
|
good_area:
|
|
si_code = SEGV_ACCERR;
|
|
|
|
/* If we took a ITLB miss on a non-executable page, catch
|
|
* that here.
|
|
*/
|
|
if ((fault_code & FAULT_CODE_ITLB) && !(vma->vm_flags & VM_EXEC)) {
|
|
BUG_ON(address != regs->tpc);
|
|
BUG_ON(regs->tstate & TSTATE_PRIV);
|
|
goto bad_area;
|
|
}
|
|
|
|
if (fault_code & FAULT_CODE_WRITE) {
|
|
if (!(vma->vm_flags & VM_WRITE))
|
|
goto bad_area;
|
|
|
|
/* Spitfire has an icache which does not snoop
|
|
* processor stores. Later processors do...
|
|
*/
|
|
if (tlb_type == spitfire &&
|
|
(vma->vm_flags & VM_EXEC) != 0 &&
|
|
vma->vm_file != NULL)
|
|
set_thread_fault_code(fault_code |
|
|
FAULT_CODE_BLKCOMMIT);
|
|
} else {
|
|
/* Allow reads even for write-only mappings */
|
|
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
|
|
goto bad_area;
|
|
}
|
|
|
|
flags |= ((fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
|
|
fault = handle_mm_fault(mm, vma, address, flags);
|
|
|
|
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
|
|
return;
|
|
|
|
if (unlikely(fault & VM_FAULT_ERROR)) {
|
|
if (fault & VM_FAULT_OOM)
|
|
goto out_of_memory;
|
|
else if (fault & VM_FAULT_SIGBUS)
|
|
goto do_sigbus;
|
|
BUG();
|
|
}
|
|
|
|
if (flags & FAULT_FLAG_ALLOW_RETRY) {
|
|
if (fault & VM_FAULT_MAJOR) {
|
|
current->maj_flt++;
|
|
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
|
|
1, regs, address);
|
|
} else {
|
|
current->min_flt++;
|
|
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
|
|
1, regs, address);
|
|
}
|
|
if (fault & VM_FAULT_RETRY) {
|
|
flags &= ~FAULT_FLAG_ALLOW_RETRY;
|
|
flags |= FAULT_FLAG_TRIED;
|
|
|
|
/* No need to up_read(&mm->mmap_sem) as we would
|
|
* have already released it in __lock_page_or_retry
|
|
* in mm/filemap.c.
|
|
*/
|
|
|
|
goto retry;
|
|
}
|
|
}
|
|
up_read(&mm->mmap_sem);
|
|
|
|
mm_rss = get_mm_rss(mm);
|
|
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
|
|
mm_rss -= (mm->context.huge_pte_count * (HPAGE_SIZE / PAGE_SIZE));
|
|
#endif
|
|
if (unlikely(mm_rss >
|
|
mm->context.tsb_block[MM_TSB_BASE].tsb_rss_limit))
|
|
tsb_grow(mm, MM_TSB_BASE, mm_rss);
|
|
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
|
|
mm_rss = mm->context.huge_pte_count;
|
|
if (unlikely(mm_rss >
|
|
mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) {
|
|
if (mm->context.tsb_block[MM_TSB_HUGE].tsb)
|
|
tsb_grow(mm, MM_TSB_HUGE, mm_rss);
|
|
else
|
|
hugetlb_setup(regs);
|
|
|
|
}
|
|
#endif
|
|
return;
|
|
|
|
/*
|
|
* Something tried to access memory that isn't in our memory map..
|
|
* Fix it, but check if it's kernel or user first..
|
|
*/
|
|
bad_area:
|
|
insn = get_fault_insn(regs, insn);
|
|
up_read(&mm->mmap_sem);
|
|
|
|
handle_kernel_fault:
|
|
do_kernel_fault(regs, si_code, fault_code, insn, address);
|
|
return;
|
|
|
|
/*
|
|
* We ran out of memory, or some other thing happened to us that made
|
|
* us unable to handle the page fault gracefully.
|
|
*/
|
|
out_of_memory:
|
|
insn = get_fault_insn(regs, insn);
|
|
up_read(&mm->mmap_sem);
|
|
if (!(regs->tstate & TSTATE_PRIV)) {
|
|
pagefault_out_of_memory();
|
|
return;
|
|
}
|
|
goto handle_kernel_fault;
|
|
|
|
intr_or_no_mm:
|
|
insn = get_fault_insn(regs, 0);
|
|
goto handle_kernel_fault;
|
|
|
|
do_sigbus:
|
|
insn = get_fault_insn(regs, insn);
|
|
up_read(&mm->mmap_sem);
|
|
|
|
/*
|
|
* Send a sigbus, regardless of whether we were in kernel
|
|
* or user mode.
|
|
*/
|
|
do_fault_siginfo(BUS_ADRERR, SIGBUS, regs, insn, fault_code);
|
|
|
|
/* Kernel mode? Handle exceptions or die */
|
|
if (regs->tstate & TSTATE_PRIV)
|
|
goto handle_kernel_fault;
|
|
}
|