linux/drivers/mmc/host/sdhci-esdhc.h
Wolfram Sang 3bb2a9f6a7 mmc: sdhci-esdhc: broken card detection is not a default quirk
It can be worked around using a GPIO which will be done for i.MX later.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Tested-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17 15:35:02 -04:00

83 lines
2.2 KiB
C

/*
* Freescale eSDHC controller driver generics for OF and pltfm.
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
* Copyright (c) 2010 Pengutronix e.K.
* Author: Wolfram Sang <w.sang@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#ifndef _DRIVERS_MMC_SDHCI_ESDHC_H
#define _DRIVERS_MMC_SDHCI_ESDHC_H
/*
* Ops and quirks for the Freescale eSDHC controller.
*/
#define ESDHC_DEFAULT_QUIRKS (SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
SDHCI_QUIRK_NO_BUSY_IRQ | \
SDHCI_QUIRK_NONSTANDARD_CLOCK | \
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
SDHCI_QUIRK_PIO_NEEDS_DELAY | \
SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | \
SDHCI_QUIRK_NO_CARD_NO_RESET)
#define ESDHC_SYSTEM_CONTROL 0x2c
#define ESDHC_CLOCK_MASK 0x0000fff0
#define ESDHC_PREDIV_SHIFT 8
#define ESDHC_DIVIDER_SHIFT 4
#define ESDHC_CLOCK_PEREN 0x00000004
#define ESDHC_CLOCK_HCKEN 0x00000002
#define ESDHC_CLOCK_IPGEN 0x00000001
/* pltfm-specific */
#define ESDHC_HOST_CONTROL_LE 0x20
/* OF-specific */
#define ESDHC_DMA_SYSCTL 0x40c
#define ESDHC_DMA_SNOOP 0x00000040
#define ESDHC_HOST_CONTROL_RES 0x05
static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
{
int pre_div = 2;
int div = 1;
u32 temp;
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
| ESDHC_CLOCK_MASK);
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
if (clock == 0)
goto out;
while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
pre_div *= 2;
while (host->max_clk / pre_div / div > clock && div < 16)
div++;
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
clock, host->max_clk / pre_div / div);
pre_div >>= 1;
div--;
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
| (div << ESDHC_DIVIDER_SHIFT)
| (pre_div << ESDHC_PREDIV_SHIFT));
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
mdelay(100);
out:
host->clock = clock;
}
#endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */