forked from Minki/linux
7672691a08
POWER9 processors up to and including "Nimbus" v2.2 have hardware bugs relating to transactional memory and thread reconfiguration. One of these bugs has a workaround which is to get the core into SMT4 state temporarily. This workaround is only needed when running bare-metal. This patch provides a function which gets the core into SMT4 mode by preventing threads from going to a stop state, and waking up those which are already in a stop state. Once at least 3 threads are not in a stop state, the core will be in SMT4 and we can continue. To do this, we add a "dont_stop" flag to the paca to tell the thread not to go into a stop state. If this flag is set, power9_idle_stop() just returns immediately with a return value of 0. The pnv_power9_force_smt4_catch() function does the following: 1. Set the dont_stop flag for each thread in the core, except ourselves (in fact we use an atomic_inc() in case more than one thread is calling this function concurrently). 2. See how many threads are awake, indicated by their requested_psscr field in the paca being 0. If this is at least 3, skip to step 5. 3. Send a doorbell interrupt to each thread that was seen as being in a stop state in step 2. 4. Until at least 3 threads are awake, scan the threads to which we sent a doorbell interrupt and check if they are awake now. This relies on the following properties: - Once dont_stop is non-zero, requested_psccr can't go from zero to non-zero, except transiently (and without the thread doing stop). - requested_psscr being zero guarantees that the thread isn't in a state-losing stop state where thread reconfiguration could occur. - Doing stop with a PSSCR value of 0 won't be a state-losing stop and thus won't allow thread reconfiguration. - Once threads_per_core/2 + 1 (i.e. 3) threads are awake, the core must be in SMT4 mode, since SMT modes are powers of 2. This does add a sync to power9_idle_stop(), which is necessary to provide the correct ordering between setting requested_psscr and checking dont_stop. The overhead of the sync should be unnoticeable compared to the latency of going into and out of a stop state. Because some objected to incurring this extra latency on systems where the XER[SO] bug is not relevant, I have put the test in power9_idle_stop inside a feature section. This means that pnv_power9_force_smt4_catch() WILL NOT WORK correctly on systems without the CPU_FTR_P9_TM_XER_SO_BUG feature bit set, and will probably hang the system. In order to cater for uses where the caller has an operation that has to be done while the core is in SMT4, the core continues to be kept in SMT4 after pnv_power9_force_smt4_catch() function returns, until the pnv_power9_force_smt4_release() function is called. It undoes the effect of step 1 above and allows the other threads to go into a stop state. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
|---|---|---|
| .. | ||
| asm | ||
| uapi/asm | ||