forked from Minki/linux
625504aeff
When adding GP-1-28 port pin support it was forgotten to remove the
CLKOUT pin from the list of pins that are not associated with a GPIO
port in pinmux_pins[]. This results in a warning when reading the
pinctrl files in sysfs as the CLKOUT pin is still added as a none GPIO
pin. Fix this by removing the duplicated entry which is no longer
needed.
~ # cat /sys/kernel/debug/pinctrl/e6060000.pin-controller/pinconf-pins
[ 89.432081] ------------[ cut here ]------------
[ 89.436904] Pin 496 is not in bias info list
[ 89.441252] WARNING: CPU: 1 PID: 456 at drivers/pinctrl/sh-pfc/core.c:408 sh_pfc_pin_to_bias_reg+0xb0/0xb8
[ 89.451002] CPU: 1 PID: 456 Comm: cat Not tainted 4.16.0-rc1-arm64-renesas-00048-gdfafc344a4f24dde #12
[ 89.460394] Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
[ 89.468910] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 89.473747] pc : sh_pfc_pin_to_bias_reg+0xb0/0xb8
[ 89.478495] lr : sh_pfc_pin_to_bias_reg+0xb0/0xb8
[ 89.483241] sp : ffff00000aff3ab0
[ 89.486587] x29: ffff00000aff3ab0 x28: ffff00000893c698
[ 89.491955] x27: ffff000008ad7d98 x26: 0000000000000000
[ 89.497323] x25: ffff8006fb3f5028 x24: ffff8006fb3f5018
[ 89.502690] x23: 0000000000000001 x22: 00000000000001f0
[ 89.508057] x21: ffff8006fb3f5018 x20: ffff000008bef000
[ 89.513423] x19: 0000000000000000 x18: ffffffffffffffff
[ 89.518790] x17: 0000000000006c4a x16: ffff000008d67c98
[ 89.524157] x15: 0000000000000001 x14: ffff00000896ca98
[ 89.529524] x13: 00000000cce5f611 x12: ffff8006f8d3b5a8
[ 89.534891] x11: ffff00000981e000 x10: ffff000008befa08
[ 89.540258] x9 : ffff8006f9b987a0 x8 : ffff000008befa08
[ 89.545625] x7 : ffff000008137094 x6 : 0000000000000000
[ 89.550991] x5 : 0000000000000000 x4 : 0000000000000001
[ 89.556357] x3 : 0000000000000007 x2 : 0000000000000007
[ 89.561723] x1 : 1ff24f80f1818600 x0 : 0000000000000000
[ 89.567091] Call trace:
[ 89.569561] sh_pfc_pin_to_bias_reg+0xb0/0xb8
[ 89.573960] r8a7795_pinmux_get_bias+0x30/0xc0
[ 89.578445] sh_pfc_pinconf_get+0x1e0/0x2d8
[ 89.582669] pin_config_get_for_pin+0x20/0x30
[ 89.587067] pinconf_generic_dump_one+0x180/0x1c8
[ 89.591815] pinconf_generic_dump_pins+0x84/0xd8
[ 89.596476] pinconf_pins_show+0xc8/0x130
[ 89.600528] seq_read+0xe4/0x510
[ 89.603789] full_proxy_read+0x60/0x90
[ 89.607576] __vfs_read+0x30/0x140
[ 89.611010] vfs_read+0x90/0x170
[ 89.614269] SyS_read+0x60/0xd8
[ 89.617443] __sys_trace_return+0x0/0x4
[ 89.621314] ---[ end trace 99c8d0d39c13e794 ]---
Fixes:
|
||
|---|---|---|
| .. | ||
| core.c | ||
| core.h | ||
| gpio.c | ||
| Kconfig | ||
| Makefile | ||
| pfc-emev2.c | ||
| pfc-r8a73a4.c | ||
| pfc-r8a7740.c | ||
| pfc-r8a7778.c | ||
| pfc-r8a7779.c | ||
| pfc-r8a7790.c | ||
| pfc-r8a7791.c | ||
| pfc-r8a7792.c | ||
| pfc-r8a7794.c | ||
| pfc-r8a7795-es1.c | ||
| pfc-r8a7795.c | ||
| pfc-r8a7796.c | ||
| pfc-r8a77970.c | ||
| pfc-r8a77995.c | ||
| pfc-sh73a0.c | ||
| pfc-sh7203.c | ||
| pfc-sh7264.c | ||
| pfc-sh7269.c | ||
| pfc-sh7720.c | ||
| pfc-sh7722.c | ||
| pfc-sh7723.c | ||
| pfc-sh7724.c | ||
| pfc-sh7734.c | ||
| pfc-sh7757.c | ||
| pfc-sh7785.c | ||
| pfc-sh7786.c | ||
| pfc-shx3.c | ||
| pinctrl.c | ||
| sh_pfc.h | ||