linux/drivers/net/wireless/ath/wil6210/netdev.c
David S. Miller 889711a03e wireless-drivers-next patches for 4.11
It's nice to see rt2x00 development has becoming active, for example
 adding support for a new chip version. Also wcn36xx has been converted
 to use the recently merged QCOM_SMD subsystem. Otherwise new features
 and fixes it lots of drivers.
 
 Major changes:
 
 iwlwifi
 
 * some more work in preparation for A000 family support
 * add support for radiotap timestamps
 * some work on our firmware debugging capabilities
 
 wcn36xx
 
 * convert to a proper QCOM_SMD driver (from the platform_driver interface)
 
 ath10k
 
 * VHT160 support
 * dump Copy Engine registers during firmware crash
 * search board file extension from SMBIOS
 
 wil6210
 
 * add disable_ap_sme module parameter
 
 rt2x00
 
 * support RT3352 with external PA
 * support for RT3352 with 20MHz crystal
 * add support for RT5350 WiSoC
 
 brcmfmac
 
 * add support for BCM43455 sdio device
 
 rtl8xxxu
 
 * add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYkafBAAoJEG4XJFUm622b0EAH/3mFY0WDfdR/Ych29HX1M/Ao
 Bd5gQfKzHS8ANR56qqmxEbpLdBnBa8iNC0IS4RFsWVv6qMoEEOHDLeY5W9XsomWK
 i45fQN2XIdjBUOyDXUjsyz006cMe79VzRvFf9gfSekP8i8BCWQzyYC8VKt/F+6Sh
 yo9yA4Yv3zA3mA3yRKtxSjLm/6xUXCFVNshKGT0rXc/oEfIN6OnIC1k0p0xw2hhl
 GyLN6PSGOqcJc91+IoGOg4TaHzPdWJcWatuxGdQn8gKSDg0+gXaNh9Gtf4H/ojqp
 Fwt2Ckk5mgJYk/2TAuFRpRXNMTJznUhp4Tjp2AE7EVM0f5JujUbQuPblOVfLIYk=
 =vKKN
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2017-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.11

It's nice to see rt2x00 development has becoming active, for example
adding support for a new chip version. Also wcn36xx has been converted
to use the recently merged QCOM_SMD subsystem. Otherwise new features
and fixes it lots of drivers.

Major changes:

iwlwifi

* some more work in preparation for A000 family support
* add support for radiotap timestamps
* some work on our firmware debugging capabilities

wcn36xx

* convert to a proper QCOM_SMD driver (from the platform_driver interface)

ath10k

* VHT160 support
* dump Copy Engine registers during firmware crash
* search board file extension from SMBIOS

wil6210

* add disable_ap_sme module parameter

rt2x00

* support RT3352 with external PA
* support for RT3352 with 20MHz crystal
* add support for RT5350 WiSoC

brcmfmac

* add support for BCM43455 sdio device

rtl8xxxu

* add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 12:46:17 -05:00

243 lines
5.6 KiB
C

/*
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/etherdevice.h>
#include "wil6210.h"
#include "txrx.h"
static int wil_open(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
wil_dbg_misc(wil, "open\n");
if (debug_fw ||
test_bit(WMI_FW_CAPABILITY_WMI_ONLY, wil->fw_capabilities)) {
wil_err(wil, "while in debug_fw or wmi_only mode\n");
return -EINVAL;
}
return wil_up(wil);
}
static int wil_stop(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
wil_dbg_misc(wil, "stop\n");
return wil_down(wil);
}
static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
return wil_ioctl(wil, ifr->ifr_data, cmd);
}
static const struct net_device_ops wil_netdev_ops = {
.ndo_open = wil_open,
.ndo_stop = wil_stop,
.ndo_start_xmit = wil_start_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = wil_do_ioctl,
};
static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget)
{
struct wil6210_priv *wil = container_of(napi, struct wil6210_priv,
napi_rx);
int quota = budget;
int done;
wil_rx_handle(wil, &quota);
done = budget - quota;
if (done < budget) {
napi_complete_done(napi, done);
wil6210_unmask_irq_rx(wil);
wil_dbg_txrx(wil, "NAPI RX complete\n");
}
wil_dbg_txrx(wil, "NAPI RX poll(%d) done %d\n", budget, done);
return done;
}
static int wil6210_netdev_poll_tx(struct napi_struct *napi, int budget)
{
struct wil6210_priv *wil = container_of(napi, struct wil6210_priv,
napi_tx);
int tx_done = 0;
uint i;
/* always process ALL Tx complete, regardless budget - it is fast */
for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
struct vring *vring = &wil->vring_tx[i];
struct vring_tx_data *txdata = &wil->vring_tx_data[i];
if (!vring->va || !txdata->enabled)
continue;
tx_done += wil_tx_complete(wil, i);
}
if (tx_done < budget) {
napi_complete(napi);
wil6210_unmask_irq_tx(wil);
wil_dbg_txrx(wil, "NAPI TX complete\n");
}
wil_dbg_txrx(wil, "NAPI TX poll(%d) done %d\n", budget, tx_done);
return min(tx_done, budget);
}
static void wil_dev_setup(struct net_device *dev)
{
ether_setup(dev);
dev->max_mtu = mtu_max;
dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
}
void *wil_if_alloc(struct device *dev)
{
struct net_device *ndev;
struct wireless_dev *wdev;
struct wil6210_priv *wil;
struct ieee80211_channel *ch;
int rc = 0;
wdev = wil_cfg80211_init(dev);
if (IS_ERR(wdev)) {
dev_err(dev, "wil_cfg80211_init failed\n");
return wdev;
}
wil = wdev_to_wil(wdev);
wil->wdev = wdev;
wil->radio_wdev = wdev;
wil_dbg_misc(wil, "if_alloc\n");
rc = wil_priv_init(wil);
if (rc) {
dev_err(dev, "wil_priv_init failed\n");
goto out_wdev;
}
wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
/* default monitor channel */
ch = wdev->wiphy->bands[NL80211_BAND_60GHZ]->channels;
cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
ndev = alloc_netdev(0, "wlan%d", NET_NAME_UNKNOWN, wil_dev_setup);
if (!ndev) {
dev_err(dev, "alloc_netdev_mqs failed\n");
rc = -ENOMEM;
goto out_priv;
}
ndev->netdev_ops = &wil_netdev_ops;
wil_set_ethtoolops(ndev);
ndev->ieee80211_ptr = wdev;
ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
NETIF_F_SG | NETIF_F_GRO |
NETIF_F_TSO | NETIF_F_TSO6 |
NETIF_F_RXHASH;
ndev->features |= ndev->hw_features;
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
wdev->netdev = ndev;
return wil;
out_priv:
wil_priv_deinit(wil);
out_wdev:
wil_wdev_free(wil);
return ERR_PTR(rc);
}
void wil_if_free(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
wil_dbg_misc(wil, "if_free\n");
if (!ndev)
return;
wil_priv_deinit(wil);
wil_to_ndev(wil) = NULL;
free_netdev(ndev);
wil_wdev_free(wil);
}
int wil_if_add(struct wil6210_priv *wil)
{
struct wireless_dev *wdev = wil_to_wdev(wil);
struct wiphy *wiphy = wdev->wiphy;
struct net_device *ndev = wil_to_ndev(wil);
int rc;
wil_dbg_misc(wil, "entered");
strlcpy(wiphy->fw_version, wil->fw_version, sizeof(wiphy->fw_version));
rc = wiphy_register(wiphy);
if (rc < 0) {
wil_err(wil, "failed to register wiphy, err %d\n", rc);
return rc;
}
netif_napi_add(ndev, &wil->napi_rx, wil6210_netdev_poll_rx,
WIL6210_NAPI_BUDGET);
netif_tx_napi_add(ndev, &wil->napi_tx, wil6210_netdev_poll_tx,
WIL6210_NAPI_BUDGET);
wil_update_net_queues_bh(wil, NULL, true);
rc = register_netdev(ndev);
if (rc < 0) {
dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
goto out_wiphy;
}
return 0;
out_wiphy:
wiphy_unregister(wdev->wiphy);
return rc;
}
void wil_if_remove(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil_to_wdev(wil);
wil_dbg_misc(wil, "if_remove\n");
unregister_netdev(ndev);
wiphy_unregister(wdev->wiphy);
}