forked from Minki/linux
75288c78c6
Implemented by modification of the .name field of the platform device, when PDs with the same names are to be used within different drivers, as <device_name> -> <device_name>:<function> Corresponding drivers should change the .name in struct device_driver to reflect upper of course. Added ppc_sys_device_disable/enable function set, making it easier to disable all the inexistent/not utilized platform device way pdevs. By the check of the "disabled" bit in the config field of ppc_sys_specs, disabled platform devices will be either added/removed from the bus, or simply not registered on it, depending on the time when disable/enable call asserted. The default behaviour when nothing is disabled/enabled will be "all devices are enabled", which is the same as before. Also helper platform_notify_map function added, making assignment of board-specific platform_info more consistent and generic. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
183 lines
6.9 KiB
C
183 lines
6.9 KiB
C
/*
|
|
* arch/ppc/kernel/mpc10x.h
|
|
*
|
|
* Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
|
|
* ctlr/EPIC/etc.
|
|
*
|
|
* Author: Mark A. Greer
|
|
* mgreer@mvista.com
|
|
*
|
|
* 2001 (c) MontaVista, Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#ifndef __PPC_KERNEL_MPC10X_H
|
|
#define __PPC_KERNEL_MPC10X_H
|
|
|
|
#include <linux/pci_ids.h>
|
|
#include <asm/pci-bridge.h>
|
|
|
|
/*
|
|
* The values here don't completely map everything but should work in most
|
|
* cases.
|
|
*
|
|
* MAP A (PReP Map)
|
|
* Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
|
|
* Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
|
|
* PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
|
|
* EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
|
|
*
|
|
* MAP B (CHRP Map)
|
|
* Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
|
|
* Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
|
|
* PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
|
|
* EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
|
|
*/
|
|
|
|
/*
|
|
* Define the vendor/device IDs for the various bridges--should be added to
|
|
* <linux/pci_ids.h>
|
|
*/
|
|
#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \
|
|
PCI_VENDOR_ID_MOTOROLA)
|
|
#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
|
|
#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
|
|
#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
|
|
|
|
/* Define the type of map to use */
|
|
#define MPC10X_MEM_MAP_A 1
|
|
#define MPC10X_MEM_MAP_B 2
|
|
|
|
/* Map A (PReP Map) Defines */
|
|
#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8
|
|
#define MPC10X_MAPA_CNFG_DATA 0x80000cfc
|
|
|
|
#define MPC10X_MAPA_ISA_IO_BASE 0x80000000
|
|
#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000
|
|
#define MPC10X_MAPA_DRAM_OFFSET 0x80000000
|
|
|
|
#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0
|
|
#define MPC10X_MAPA_PCI_IO_START 0x00000000
|
|
#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1)
|
|
#define MPC10X_MAPA_PCI_MEM_START 0x00000000
|
|
#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1)
|
|
|
|
#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \
|
|
MPC10X_MAPA_PCI_MEM_START)
|
|
|
|
/* Map B (CHRP Map) Defines */
|
|
#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
|
|
#define MPC10X_MAPB_CNFG_DATA 0xfee00000
|
|
|
|
#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000
|
|
#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000
|
|
#define MPC10X_MAPB_DRAM_OFFSET 0x00000000
|
|
|
|
#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000
|
|
#define MPC10X_MAPB_PCI_IO_START 0x00000000
|
|
#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1)
|
|
#define MPC10X_MAPB_PCI_MEM_START 0x80000000
|
|
#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1)
|
|
|
|
#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \
|
|
MPC10X_MAPB_PCI_MEM_START)
|
|
|
|
/* Set hose members to values appropriate for the mem map used */
|
|
#define MPC10X_SETUP_HOSE(hose, map) { \
|
|
(hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \
|
|
(hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \
|
|
(hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \
|
|
(hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \
|
|
(hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \
|
|
(hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \
|
|
}
|
|
|
|
|
|
/* Miscellaneous Configuration register offsets */
|
|
#define MPC10X_CFG_PIR_REG 0x09
|
|
#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00
|
|
#define MPC10X_CFG_PIR_AGENT 0x01
|
|
|
|
#define MPC10X_CFG_EUMBBAR 0x78
|
|
|
|
#define MPC10X_CFG_PICR1_REG 0xa8
|
|
#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000
|
|
#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000
|
|
#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000
|
|
#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004
|
|
#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040
|
|
|
|
#define MPC10X_CFG_PICR2_REG 0xac
|
|
#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001
|
|
|
|
#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0
|
|
#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */
|
|
#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */
|
|
#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */
|
|
#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */
|
|
#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */
|
|
|
|
/* Define offsets for the memory controller registers in the config space */
|
|
#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
|
|
#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
|
|
#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
|
|
#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
|
|
|
|
#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
|
|
#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */
|
|
#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
|
|
#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
|
|
|
|
#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
|
|
|
|
/* Define some offset in the EUMB */
|
|
#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */
|
|
|
|
#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */
|
|
#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */
|
|
#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */
|
|
#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */
|
|
#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */
|
|
#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */
|
|
#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */
|
|
#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */
|
|
#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */
|
|
#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */
|
|
#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */
|
|
#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */
|
|
#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */
|
|
#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */
|
|
#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */
|
|
#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */
|
|
|
|
/*
|
|
* Define some recommended places to put the EUMB regs.
|
|
* For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
|
|
*/
|
|
extern unsigned long ioremap_base;
|
|
#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
|
|
#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
|
|
|
|
enum ppc_sys_devices {
|
|
MPC10X_IIC1,
|
|
MPC10X_DMA0,
|
|
MPC10X_DMA1,
|
|
MPC10X_UART0,
|
|
MPC10X_UART1,
|
|
NUM_PPC_SYS_DEVS,
|
|
};
|
|
|
|
int mpc10x_bridge_init(struct pci_controller *hose,
|
|
uint current_map,
|
|
uint new_map,
|
|
uint phys_eumb_base);
|
|
unsigned long mpc10x_get_mem_size(uint mem_map);
|
|
int mpc10x_enable_store_gathering(struct pci_controller *hose);
|
|
int mpc10x_disable_store_gathering(struct pci_controller *hose);
|
|
|
|
/* For MPC107 boards that use the built-in openpic */
|
|
void mpc10x_set_openpic(void);
|
|
|
|
#endif /* __PPC_KERNEL_MPC10X_H */
|