forked from Minki/linux
68584e380e
This allows clients running in atomic context to poll for messages to arrive. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
442 lines
12 KiB
C
442 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
|
/*
|
|
* Apple mailbox driver
|
|
*
|
|
* Copyright (C) 2021 The Asahi Linux Contributors
|
|
*
|
|
* This driver adds support for two mailbox variants (called ASC and M3 by
|
|
* Apple) found in Apple SoCs such as the M1. It consists of two FIFOs used to
|
|
* exchange 64+32 bit messages between the main CPU and a co-processor.
|
|
* Various coprocessors implement different IPC protocols based on these simple
|
|
* messages and shared memory buffers.
|
|
*
|
|
* Both the main CPU and the co-processor see the same set of registers but
|
|
* the first FIFO (A2I) is always used to transfer messages from the application
|
|
* processor (us) to the I/O processor and the second one (I2A) for the
|
|
* other direction.
|
|
*/
|
|
|
|
#include <linux/apple-mailbox.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mailbox_controller.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/types.h>
|
|
|
|
#define APPLE_ASC_MBOX_CONTROL_FULL BIT(16)
|
|
#define APPLE_ASC_MBOX_CONTROL_EMPTY BIT(17)
|
|
|
|
#define APPLE_ASC_MBOX_A2I_CONTROL 0x110
|
|
#define APPLE_ASC_MBOX_A2I_SEND0 0x800
|
|
#define APPLE_ASC_MBOX_A2I_SEND1 0x808
|
|
#define APPLE_ASC_MBOX_A2I_RECV0 0x810
|
|
#define APPLE_ASC_MBOX_A2I_RECV1 0x818
|
|
|
|
#define APPLE_ASC_MBOX_I2A_CONTROL 0x114
|
|
#define APPLE_ASC_MBOX_I2A_SEND0 0x820
|
|
#define APPLE_ASC_MBOX_I2A_SEND1 0x828
|
|
#define APPLE_ASC_MBOX_I2A_RECV0 0x830
|
|
#define APPLE_ASC_MBOX_I2A_RECV1 0x838
|
|
|
|
#define APPLE_M3_MBOX_CONTROL_FULL BIT(16)
|
|
#define APPLE_M3_MBOX_CONTROL_EMPTY BIT(17)
|
|
|
|
#define APPLE_M3_MBOX_A2I_CONTROL 0x50
|
|
#define APPLE_M3_MBOX_A2I_SEND0 0x60
|
|
#define APPLE_M3_MBOX_A2I_SEND1 0x68
|
|
#define APPLE_M3_MBOX_A2I_RECV0 0x70
|
|
#define APPLE_M3_MBOX_A2I_RECV1 0x78
|
|
|
|
#define APPLE_M3_MBOX_I2A_CONTROL 0x80
|
|
#define APPLE_M3_MBOX_I2A_SEND0 0x90
|
|
#define APPLE_M3_MBOX_I2A_SEND1 0x98
|
|
#define APPLE_M3_MBOX_I2A_RECV0 0xa0
|
|
#define APPLE_M3_MBOX_I2A_RECV1 0xa8
|
|
|
|
#define APPLE_M3_MBOX_IRQ_ENABLE 0x48
|
|
#define APPLE_M3_MBOX_IRQ_ACK 0x4c
|
|
#define APPLE_M3_MBOX_IRQ_A2I_EMPTY BIT(0)
|
|
#define APPLE_M3_MBOX_IRQ_A2I_NOT_EMPTY BIT(1)
|
|
#define APPLE_M3_MBOX_IRQ_I2A_EMPTY BIT(2)
|
|
#define APPLE_M3_MBOX_IRQ_I2A_NOT_EMPTY BIT(3)
|
|
|
|
#define APPLE_MBOX_MSG1_OUTCNT GENMASK(56, 52)
|
|
#define APPLE_MBOX_MSG1_INCNT GENMASK(51, 48)
|
|
#define APPLE_MBOX_MSG1_OUTPTR GENMASK(47, 44)
|
|
#define APPLE_MBOX_MSG1_INPTR GENMASK(43, 40)
|
|
#define APPLE_MBOX_MSG1_MSG GENMASK(31, 0)
|
|
|
|
struct apple_mbox_hw {
|
|
unsigned int control_full;
|
|
unsigned int control_empty;
|
|
|
|
unsigned int a2i_control;
|
|
unsigned int a2i_send0;
|
|
unsigned int a2i_send1;
|
|
|
|
unsigned int i2a_control;
|
|
unsigned int i2a_recv0;
|
|
unsigned int i2a_recv1;
|
|
|
|
bool has_irq_controls;
|
|
unsigned int irq_enable;
|
|
unsigned int irq_ack;
|
|
unsigned int irq_bit_recv_not_empty;
|
|
unsigned int irq_bit_send_empty;
|
|
};
|
|
|
|
struct apple_mbox {
|
|
void __iomem *regs;
|
|
const struct apple_mbox_hw *hw;
|
|
|
|
int irq_recv_not_empty;
|
|
int irq_send_empty;
|
|
|
|
struct mbox_chan chan;
|
|
|
|
struct device *dev;
|
|
struct mbox_controller controller;
|
|
spinlock_t rx_lock;
|
|
};
|
|
|
|
static const struct of_device_id apple_mbox_of_match[];
|
|
|
|
static bool apple_mbox_hw_can_send(struct apple_mbox *apple_mbox)
|
|
{
|
|
u32 mbox_ctrl =
|
|
readl_relaxed(apple_mbox->regs + apple_mbox->hw->a2i_control);
|
|
|
|
return !(mbox_ctrl & apple_mbox->hw->control_full);
|
|
}
|
|
|
|
static bool apple_mbox_hw_send_empty(struct apple_mbox *apple_mbox)
|
|
{
|
|
u32 mbox_ctrl =
|
|
readl_relaxed(apple_mbox->regs + apple_mbox->hw->a2i_control);
|
|
|
|
return mbox_ctrl & apple_mbox->hw->control_empty;
|
|
}
|
|
|
|
static int apple_mbox_hw_send(struct apple_mbox *apple_mbox,
|
|
struct apple_mbox_msg *msg)
|
|
{
|
|
if (!apple_mbox_hw_can_send(apple_mbox))
|
|
return -EBUSY;
|
|
|
|
dev_dbg(apple_mbox->dev, "> TX %016llx %08x\n", msg->msg0, msg->msg1);
|
|
|
|
writeq_relaxed(msg->msg0, apple_mbox->regs + apple_mbox->hw->a2i_send0);
|
|
writeq_relaxed(FIELD_PREP(APPLE_MBOX_MSG1_MSG, msg->msg1),
|
|
apple_mbox->regs + apple_mbox->hw->a2i_send1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool apple_mbox_hw_can_recv(struct apple_mbox *apple_mbox)
|
|
{
|
|
u32 mbox_ctrl =
|
|
readl_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_control);
|
|
|
|
return !(mbox_ctrl & apple_mbox->hw->control_empty);
|
|
}
|
|
|
|
static int apple_mbox_hw_recv(struct apple_mbox *apple_mbox,
|
|
struct apple_mbox_msg *msg)
|
|
{
|
|
if (!apple_mbox_hw_can_recv(apple_mbox))
|
|
return -ENOMSG;
|
|
|
|
msg->msg0 = readq_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_recv0);
|
|
msg->msg1 = FIELD_GET(
|
|
APPLE_MBOX_MSG1_MSG,
|
|
readq_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_recv1));
|
|
|
|
dev_dbg(apple_mbox->dev, "< RX %016llx %08x\n", msg->msg0, msg->msg1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int apple_mbox_chan_send_data(struct mbox_chan *chan, void *data)
|
|
{
|
|
struct apple_mbox *apple_mbox = chan->con_priv;
|
|
struct apple_mbox_msg *msg = data;
|
|
int ret;
|
|
|
|
ret = apple_mbox_hw_send(apple_mbox, msg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* The interrupt is level triggered and will keep firing as long as the
|
|
* FIFO is empty. It will also keep firing if the FIFO was empty
|
|
* at any point in the past until it has been acknowledged at the
|
|
* mailbox level. By acknowledging it here we can ensure that we will
|
|
* only get the interrupt once the FIFO has been cleared again.
|
|
* If the FIFO is already empty before the ack it will fire again
|
|
* immediately after the ack.
|
|
*/
|
|
if (apple_mbox->hw->has_irq_controls) {
|
|
writel_relaxed(apple_mbox->hw->irq_bit_send_empty,
|
|
apple_mbox->regs + apple_mbox->hw->irq_ack);
|
|
}
|
|
enable_irq(apple_mbox->irq_send_empty);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t apple_mbox_send_empty_irq(int irq, void *data)
|
|
{
|
|
struct apple_mbox *apple_mbox = data;
|
|
|
|
/*
|
|
* We don't need to acknowledge the interrupt at the mailbox level
|
|
* here even if supported by the hardware. It will keep firing but that
|
|
* doesn't matter since it's disabled at the main interrupt controller.
|
|
* apple_mbox_chan_send_data will acknowledge it before enabling
|
|
* it at the main controller again.
|
|
*/
|
|
disable_irq_nosync(apple_mbox->irq_send_empty);
|
|
mbox_chan_txdone(&apple_mbox->chan, 0);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int apple_mbox_poll(struct apple_mbox *apple_mbox)
|
|
{
|
|
struct apple_mbox_msg msg;
|
|
int ret = 0;
|
|
|
|
while (apple_mbox_hw_recv(apple_mbox, &msg) == 0) {
|
|
mbox_chan_received_data(&apple_mbox->chan, (void *)&msg);
|
|
ret++;
|
|
}
|
|
|
|
/*
|
|
* The interrupt will keep firing even if there are no more messages
|
|
* unless we also acknowledge it at the mailbox level here.
|
|
* There's no race if a message comes in between the check in the while
|
|
* loop above and the ack below: If a new messages arrives inbetween
|
|
* those two the interrupt will just fire again immediately after the
|
|
* ack since it's level triggered.
|
|
*/
|
|
if (apple_mbox->hw->has_irq_controls) {
|
|
writel_relaxed(apple_mbox->hw->irq_bit_recv_not_empty,
|
|
apple_mbox->regs + apple_mbox->hw->irq_ack);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t apple_mbox_recv_irq(int irq, void *data)
|
|
{
|
|
struct apple_mbox *apple_mbox = data;
|
|
|
|
spin_lock(&apple_mbox->rx_lock);
|
|
apple_mbox_poll(apple_mbox);
|
|
spin_unlock(&apple_mbox->rx_lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static bool apple_mbox_chan_peek_data(struct mbox_chan *chan)
|
|
{
|
|
struct apple_mbox *apple_mbox = chan->con_priv;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&apple_mbox->rx_lock, flags);
|
|
ret = apple_mbox_poll(apple_mbox);
|
|
spin_unlock_irqrestore(&apple_mbox->rx_lock, flags);
|
|
|
|
return ret > 0;
|
|
}
|
|
|
|
static int apple_mbox_chan_flush(struct mbox_chan *chan, unsigned long timeout)
|
|
{
|
|
struct apple_mbox *apple_mbox = chan->con_priv;
|
|
unsigned long deadline = jiffies + msecs_to_jiffies(timeout);
|
|
|
|
while (time_before(jiffies, deadline)) {
|
|
if (apple_mbox_hw_send_empty(apple_mbox)) {
|
|
mbox_chan_txdone(&apple_mbox->chan, 0);
|
|
return 0;
|
|
}
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return -ETIME;
|
|
}
|
|
|
|
static int apple_mbox_chan_startup(struct mbox_chan *chan)
|
|
{
|
|
struct apple_mbox *apple_mbox = chan->con_priv;
|
|
|
|
/*
|
|
* Only some variants of this mailbox HW provide interrupt control
|
|
* at the mailbox level. We therefore need to handle enabling/disabling
|
|
* interrupts at the main interrupt controller anyway for hardware that
|
|
* doesn't. Just always keep the interrupts we care about enabled at
|
|
* the mailbox level so that both hardware revisions behave almost
|
|
* the same.
|
|
*/
|
|
if (apple_mbox->hw->has_irq_controls) {
|
|
writel_relaxed(apple_mbox->hw->irq_bit_recv_not_empty |
|
|
apple_mbox->hw->irq_bit_send_empty,
|
|
apple_mbox->regs + apple_mbox->hw->irq_enable);
|
|
}
|
|
|
|
enable_irq(apple_mbox->irq_recv_not_empty);
|
|
return 0;
|
|
}
|
|
|
|
static void apple_mbox_chan_shutdown(struct mbox_chan *chan)
|
|
{
|
|
struct apple_mbox *apple_mbox = chan->con_priv;
|
|
|
|
disable_irq(apple_mbox->irq_recv_not_empty);
|
|
}
|
|
|
|
static const struct mbox_chan_ops apple_mbox_ops = {
|
|
.send_data = apple_mbox_chan_send_data,
|
|
.peek_data = apple_mbox_chan_peek_data,
|
|
.flush = apple_mbox_chan_flush,
|
|
.startup = apple_mbox_chan_startup,
|
|
.shutdown = apple_mbox_chan_shutdown,
|
|
};
|
|
|
|
static struct mbox_chan *apple_mbox_of_xlate(struct mbox_controller *mbox,
|
|
const struct of_phandle_args *args)
|
|
{
|
|
if (args->args_count != 0)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return &mbox->chans[0];
|
|
}
|
|
|
|
static int apple_mbox_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
const struct of_device_id *match;
|
|
char *irqname;
|
|
struct apple_mbox *mbox;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
match = of_match_node(apple_mbox_of_match, pdev->dev.of_node);
|
|
if (!match)
|
|
return -EINVAL;
|
|
if (!match->data)
|
|
return -EINVAL;
|
|
|
|
mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
|
|
if (!mbox)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, mbox);
|
|
|
|
mbox->dev = dev;
|
|
mbox->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(mbox->regs))
|
|
return PTR_ERR(mbox->regs);
|
|
|
|
mbox->hw = match->data;
|
|
mbox->irq_recv_not_empty =
|
|
platform_get_irq_byname(pdev, "recv-not-empty");
|
|
if (mbox->irq_recv_not_empty < 0)
|
|
return -ENODEV;
|
|
|
|
mbox->irq_send_empty = platform_get_irq_byname(pdev, "send-empty");
|
|
if (mbox->irq_send_empty < 0)
|
|
return -ENODEV;
|
|
|
|
mbox->controller.dev = mbox->dev;
|
|
mbox->controller.num_chans = 1;
|
|
mbox->controller.chans = &mbox->chan;
|
|
mbox->controller.ops = &apple_mbox_ops;
|
|
mbox->controller.txdone_irq = true;
|
|
mbox->controller.of_xlate = apple_mbox_of_xlate;
|
|
mbox->chan.con_priv = mbox;
|
|
spin_lock_init(&mbox->rx_lock);
|
|
|
|
irqname = devm_kasprintf(dev, GFP_KERNEL, "%s-recv", dev_name(dev));
|
|
if (!irqname)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_request_threaded_irq(dev, mbox->irq_recv_not_empty, NULL,
|
|
apple_mbox_recv_irq,
|
|
IRQF_NO_AUTOEN | IRQF_ONESHOT, irqname,
|
|
mbox);
|
|
if (ret)
|
|
return ret;
|
|
|
|
irqname = devm_kasprintf(dev, GFP_KERNEL, "%s-send", dev_name(dev));
|
|
if (!irqname)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_request_irq(dev, mbox->irq_send_empty,
|
|
apple_mbox_send_empty_irq, IRQF_NO_AUTOEN,
|
|
irqname, mbox);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_mbox_controller_register(dev, &mbox->controller);
|
|
}
|
|
|
|
static const struct apple_mbox_hw apple_mbox_asc_hw = {
|
|
.control_full = APPLE_ASC_MBOX_CONTROL_FULL,
|
|
.control_empty = APPLE_ASC_MBOX_CONTROL_EMPTY,
|
|
|
|
.a2i_control = APPLE_ASC_MBOX_A2I_CONTROL,
|
|
.a2i_send0 = APPLE_ASC_MBOX_A2I_SEND0,
|
|
.a2i_send1 = APPLE_ASC_MBOX_A2I_SEND1,
|
|
|
|
.i2a_control = APPLE_ASC_MBOX_I2A_CONTROL,
|
|
.i2a_recv0 = APPLE_ASC_MBOX_I2A_RECV0,
|
|
.i2a_recv1 = APPLE_ASC_MBOX_I2A_RECV1,
|
|
|
|
.has_irq_controls = false,
|
|
};
|
|
|
|
static const struct apple_mbox_hw apple_mbox_m3_hw = {
|
|
.control_full = APPLE_M3_MBOX_CONTROL_FULL,
|
|
.control_empty = APPLE_M3_MBOX_CONTROL_EMPTY,
|
|
|
|
.a2i_control = APPLE_M3_MBOX_A2I_CONTROL,
|
|
.a2i_send0 = APPLE_M3_MBOX_A2I_SEND0,
|
|
.a2i_send1 = APPLE_M3_MBOX_A2I_SEND1,
|
|
|
|
.i2a_control = APPLE_M3_MBOX_I2A_CONTROL,
|
|
.i2a_recv0 = APPLE_M3_MBOX_I2A_RECV0,
|
|
.i2a_recv1 = APPLE_M3_MBOX_I2A_RECV1,
|
|
|
|
.has_irq_controls = true,
|
|
.irq_enable = APPLE_M3_MBOX_IRQ_ENABLE,
|
|
.irq_ack = APPLE_M3_MBOX_IRQ_ACK,
|
|
.irq_bit_recv_not_empty = APPLE_M3_MBOX_IRQ_I2A_NOT_EMPTY,
|
|
.irq_bit_send_empty = APPLE_M3_MBOX_IRQ_A2I_EMPTY,
|
|
};
|
|
|
|
static const struct of_device_id apple_mbox_of_match[] = {
|
|
{ .compatible = "apple,asc-mailbox-v4", .data = &apple_mbox_asc_hw },
|
|
{ .compatible = "apple,m3-mailbox-v2", .data = &apple_mbox_m3_hw },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, apple_mbox_of_match);
|
|
|
|
static struct platform_driver apple_mbox_driver = {
|
|
.driver = {
|
|
.name = "apple-mailbox",
|
|
.of_match_table = apple_mbox_of_match,
|
|
},
|
|
.probe = apple_mbox_probe,
|
|
};
|
|
module_platform_driver(apple_mbox_driver);
|
|
|
|
MODULE_LICENSE("Dual MIT/GPL");
|
|
MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
|
|
MODULE_DESCRIPTION("Apple Mailbox driver");
|