forked from Minki/linux
6f07b72ada
Fix the value of PG version for 128x at sysfs, remove write permissions from PG version (hw_pg_ver) in sysfs and add remove files (hw_pg_ver,bt_coex_state) from sysfs while freeing hardware. New macro names for register Fuse_data_2_1 depend on architecture. Propagate chip id through wiphy in PLT mode which still not work of a bug in ethtool. Signed-off-by: Gery Kahn <geryk@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
131 lines
3.8 KiB
C
131 lines
3.8 KiB
C
/*
|
|
* This file is part of wl1271
|
|
*
|
|
* Copyright (C) 2008-2009 Nokia Corporation
|
|
*
|
|
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef __BOOT_H__
|
|
#define __BOOT_H__
|
|
|
|
#include "wl12xx.h"
|
|
|
|
int wl1271_boot(struct wl1271 *wl);
|
|
int wl1271_load_firmware(struct wl1271 *wl);
|
|
|
|
#define WL1271_NO_SUBBANDS 8
|
|
#define WL1271_NO_POWER_LEVELS 4
|
|
#define WL1271_FW_VERSION_MAX_LEN 20
|
|
|
|
struct wl1271_static_data {
|
|
u8 mac_address[ETH_ALEN];
|
|
u8 padding[2];
|
|
u8 fw_version[WL1271_FW_VERSION_MAX_LEN];
|
|
u32 hw_version;
|
|
u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS];
|
|
};
|
|
|
|
/* number of times we try to read the INIT interrupt */
|
|
#define INIT_LOOP 20000
|
|
|
|
/* delay between retries */
|
|
#define INIT_LOOP_DELAY 50
|
|
|
|
#define WU_COUNTER_PAUSE_VAL 0x3FF
|
|
#define WELP_ARM_COMMAND_VAL 0x4
|
|
|
|
#define OCP_REG_POLARITY 0x0064
|
|
#define OCP_REG_CLK_TYPE 0x0448
|
|
#define OCP_REG_CLK_POLARITY 0x0cb2
|
|
#define OCP_REG_CLK_PULL 0x0cb4
|
|
|
|
#define WL127X_REG_FUSE_DATA_2_1 0x050a
|
|
#define WL128X_REG_FUSE_DATA_2_1 0x2152
|
|
#define PG_VER_MASK 0x3c
|
|
#define PG_VER_OFFSET 2
|
|
|
|
#define PG_MAJOR_VER_MASK 0x3
|
|
#define PG_MAJOR_VER_OFFSET 0x0
|
|
#define PG_MINOR_VER_MASK 0xc
|
|
#define PG_MINOR_VER_OFFSET 0x2
|
|
|
|
#define CMD_MBOX_ADDRESS 0x407B4
|
|
|
|
#define POLARITY_LOW BIT(1)
|
|
#define NO_PULL (BIT(14) | BIT(15))
|
|
|
|
#define FREF_CLK_TYPE_BITS 0xfffffe7f
|
|
#define CLK_REQ_PRCM 0x100
|
|
#define FREF_CLK_POLARITY_BITS 0xfffff8ff
|
|
#define CLK_REQ_OUTN_SEL 0x700
|
|
|
|
/* PLL configuration algorithm for wl128x */
|
|
#define SYS_CLK_CFG_REG 0x2200
|
|
/* Bit[0] - 0-TCXO, 1-FREF */
|
|
#define MCS_PLL_CLK_SEL_FREF BIT(0)
|
|
/* Bit[3:2] - 01-TCXO, 10-FREF */
|
|
#define WL_CLK_REQ_TYPE_FREF BIT(3)
|
|
#define WL_CLK_REQ_TYPE_PG2 (BIT(3) | BIT(2))
|
|
/* Bit[4] - 0-TCXO, 1-FREF */
|
|
#define PRCM_CM_EN_MUX_WLAN_FREF BIT(4)
|
|
|
|
#define TCXO_ILOAD_INT_REG 0x2264
|
|
#define TCXO_CLK_DETECT_REG 0x2266
|
|
|
|
#define TCXO_DET_FAILED BIT(4)
|
|
|
|
#define FREF_ILOAD_INT_REG 0x2084
|
|
#define FREF_CLK_DETECT_REG 0x2086
|
|
#define FREF_CLK_DETECT_FAIL BIT(4)
|
|
|
|
/* Use this reg for masking during driver access */
|
|
#define WL_SPARE_REG 0x2320
|
|
#define WL_SPARE_VAL BIT(2)
|
|
/* Bit[6:5:3] - mask wl write SYS_CLK_CFG[8:5:2:4] */
|
|
#define WL_SPARE_MASK_8526 (BIT(6) | BIT(5) | BIT(3))
|
|
|
|
#define PLL_LOCK_COUNTERS_REG 0xD8C
|
|
#define PLL_LOCK_COUNTERS_COEX 0x0F
|
|
#define PLL_LOCK_COUNTERS_MCS 0xF0
|
|
#define MCS_PLL_OVERRIDE_REG 0xD90
|
|
#define MCS_PLL_CONFIG_REG 0xD92
|
|
#define MCS_SEL_IN_FREQ_MASK 0x0070
|
|
#define MCS_SEL_IN_FREQ_SHIFT 4
|
|
#define MCS_PLL_CONFIG_REG_VAL 0x73
|
|
#define MCS_PLL_ENABLE_HP (BIT(0) | BIT(1))
|
|
|
|
#define MCS_PLL_M_REG 0xD94
|
|
#define MCS_PLL_N_REG 0xD96
|
|
#define MCS_PLL_M_REG_VAL 0xC8
|
|
#define MCS_PLL_N_REG_VAL 0x07
|
|
|
|
#define SDIO_IO_DS 0xd14
|
|
|
|
/* SDIO/wSPI DS configuration values */
|
|
enum {
|
|
HCI_IO_DS_8MA = 0,
|
|
HCI_IO_DS_4MA = 1, /* default */
|
|
HCI_IO_DS_6MA = 2,
|
|
HCI_IO_DS_2MA = 3,
|
|
};
|
|
|
|
/* end PLL configuration algorithm for wl128x */
|
|
|
|
#endif
|