forked from Minki/linux
53dd5c709b
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/clk/imx/clk-pllv3.c: In function ‘imx_clk_pllv3’:
drivers/clk/imx/clk-pllv3.c:446:18: warning: this statement may fall through [-Wimplicit-fallthrough=]
pll->div_shift = 1;
~~~~~~~~~~~~~~~^~~
drivers/clk/imx/clk-pllv3.c:447:2: note: here
case IMX_PLLV3_USB:
^~~~
drivers/clk/imx/clk-pllv3.c:453:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
pll->denom_offset = PLL_IMX7_DENOM_OFFSET;
^
drivers/clk/imx/clk-pllv3.c:454:2: note: here
case IMX_PLLV3_AV:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b4a4cb5a04
("clk: imx: correct i.MX7D AV PLL num/denom offset")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
494 lines
12 KiB
C
494 lines
12 KiB
C
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
* Copyright 2012 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/err.h>
|
|
#include "clk.h"
|
|
|
|
#define PLL_NUM_OFFSET 0x10
|
|
#define PLL_DENOM_OFFSET 0x20
|
|
#define PLL_IMX7_NUM_OFFSET 0x20
|
|
#define PLL_IMX7_DENOM_OFFSET 0x30
|
|
|
|
#define PLL_VF610_NUM_OFFSET 0x20
|
|
#define PLL_VF610_DENOM_OFFSET 0x30
|
|
|
|
#define BM_PLL_POWER (0x1 << 12)
|
|
#define BM_PLL_LOCK (0x1 << 31)
|
|
#define IMX7_ENET_PLL_POWER (0x1 << 5)
|
|
#define IMX7_DDR_PLL_POWER (0x1 << 20)
|
|
|
|
/**
|
|
* struct clk_pllv3 - IMX PLL clock version 3
|
|
* @clk_hw: clock source
|
|
* @base: base address of PLL registers
|
|
* @power_bit: pll power bit mask
|
|
* @powerup_set: set power_bit to power up the PLL
|
|
* @div_mask: mask of divider bits
|
|
* @div_shift: shift of divider bits
|
|
*
|
|
* IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3
|
|
* is actually a multiplier, and always sits at bit 0.
|
|
*/
|
|
struct clk_pllv3 {
|
|
struct clk_hw hw;
|
|
void __iomem *base;
|
|
u32 power_bit;
|
|
bool powerup_set;
|
|
u32 div_mask;
|
|
u32 div_shift;
|
|
unsigned long ref_clock;
|
|
u32 num_offset;
|
|
u32 denom_offset;
|
|
};
|
|
|
|
#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
|
|
|
|
static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(10);
|
|
u32 val = readl_relaxed(pll->base) & pll->power_bit;
|
|
|
|
/* No need to wait for lock when pll is not powered up */
|
|
if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
|
|
return 0;
|
|
|
|
/* Wait for PLL to lock */
|
|
do {
|
|
if (readl_relaxed(pll->base) & BM_PLL_LOCK)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
break;
|
|
usleep_range(50, 500);
|
|
} while (1);
|
|
|
|
return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int clk_pllv3_prepare(struct clk_hw *hw)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
if (pll->powerup_set)
|
|
val |= pll->power_bit;
|
|
else
|
|
val &= ~pll->power_bit;
|
|
writel_relaxed(val, pll->base);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static void clk_pllv3_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
if (pll->powerup_set)
|
|
val &= ~pll->power_bit;
|
|
else
|
|
val |= pll->power_bit;
|
|
writel_relaxed(val, pll->base);
|
|
}
|
|
|
|
static int clk_pllv3_is_prepared(struct clk_hw *hw)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
|
|
if (readl_relaxed(pll->base) & BM_PLL_LOCK)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
|
|
|
|
return (div == 1) ? parent_rate * 22 : parent_rate * 20;
|
|
}
|
|
|
|
static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long parent_rate = *prate;
|
|
|
|
return (rate >= parent_rate * 22) ? parent_rate * 22 :
|
|
parent_rate * 20;
|
|
}
|
|
|
|
static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 val, div;
|
|
|
|
if (rate == parent_rate * 22)
|
|
div = 1;
|
|
else if (rate == parent_rate * 20)
|
|
div = 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
val &= ~(pll->div_mask << pll->div_shift);
|
|
val |= (div << pll->div_shift);
|
|
writel_relaxed(val, pll->base);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.is_prepared = clk_pllv3_is_prepared,
|
|
.recalc_rate = clk_pllv3_recalc_rate,
|
|
.round_rate = clk_pllv3_round_rate,
|
|
.set_rate = clk_pllv3_set_rate,
|
|
};
|
|
|
|
static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 div = readl_relaxed(pll->base) & pll->div_mask;
|
|
|
|
return parent_rate * div / 2;
|
|
}
|
|
|
|
static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long parent_rate = *prate;
|
|
unsigned long min_rate = parent_rate * 54 / 2;
|
|
unsigned long max_rate = parent_rate * 108 / 2;
|
|
u32 div;
|
|
|
|
if (rate > max_rate)
|
|
rate = max_rate;
|
|
else if (rate < min_rate)
|
|
rate = min_rate;
|
|
div = rate * 2 / parent_rate;
|
|
|
|
return parent_rate * div / 2;
|
|
}
|
|
|
|
static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
unsigned long min_rate = parent_rate * 54 / 2;
|
|
unsigned long max_rate = parent_rate * 108 / 2;
|
|
u32 val, div;
|
|
|
|
if (rate < min_rate || rate > max_rate)
|
|
return -EINVAL;
|
|
|
|
div = rate * 2 / parent_rate;
|
|
val = readl_relaxed(pll->base);
|
|
val &= ~pll->div_mask;
|
|
val |= div;
|
|
writel_relaxed(val, pll->base);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_sys_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.is_prepared = clk_pllv3_is_prepared,
|
|
.recalc_rate = clk_pllv3_sys_recalc_rate,
|
|
.round_rate = clk_pllv3_sys_round_rate,
|
|
.set_rate = clk_pllv3_sys_set_rate,
|
|
};
|
|
|
|
static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
u32 mfn = readl_relaxed(pll->base + pll->num_offset);
|
|
u32 mfd = readl_relaxed(pll->base + pll->denom_offset);
|
|
u32 div = readl_relaxed(pll->base) & pll->div_mask;
|
|
u64 temp64 = (u64)parent_rate;
|
|
|
|
temp64 *= mfn;
|
|
do_div(temp64, mfd);
|
|
|
|
return parent_rate * div + (unsigned long)temp64;
|
|
}
|
|
|
|
static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long parent_rate = *prate;
|
|
unsigned long min_rate = parent_rate * 27;
|
|
unsigned long max_rate = parent_rate * 54;
|
|
u32 div;
|
|
u32 mfn, mfd = 1000000;
|
|
u32 max_mfd = 0x3FFFFFFF;
|
|
u64 temp64;
|
|
|
|
if (rate > max_rate)
|
|
rate = max_rate;
|
|
else if (rate < min_rate)
|
|
rate = min_rate;
|
|
|
|
if (parent_rate <= max_mfd)
|
|
mfd = parent_rate;
|
|
|
|
div = rate / parent_rate;
|
|
temp64 = (u64) (rate - div * parent_rate);
|
|
temp64 *= mfd;
|
|
do_div(temp64, parent_rate);
|
|
mfn = temp64;
|
|
|
|
temp64 = (u64)parent_rate;
|
|
temp64 *= mfn;
|
|
do_div(temp64, mfd);
|
|
|
|
return parent_rate * div + (unsigned long)temp64;
|
|
}
|
|
|
|
static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
unsigned long min_rate = parent_rate * 27;
|
|
unsigned long max_rate = parent_rate * 54;
|
|
u32 val, div;
|
|
u32 mfn, mfd = 1000000;
|
|
u32 max_mfd = 0x3FFFFFFF;
|
|
u64 temp64;
|
|
|
|
if (rate < min_rate || rate > max_rate)
|
|
return -EINVAL;
|
|
|
|
if (parent_rate <= max_mfd)
|
|
mfd = parent_rate;
|
|
|
|
div = rate / parent_rate;
|
|
temp64 = (u64) (rate - div * parent_rate);
|
|
temp64 *= mfd;
|
|
do_div(temp64, parent_rate);
|
|
mfn = temp64;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
val &= ~pll->div_mask;
|
|
val |= div;
|
|
writel_relaxed(val, pll->base);
|
|
writel_relaxed(mfn, pll->base + pll->num_offset);
|
|
writel_relaxed(mfd, pll->base + pll->denom_offset);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_av_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.is_prepared = clk_pllv3_is_prepared,
|
|
.recalc_rate = clk_pllv3_av_recalc_rate,
|
|
.round_rate = clk_pllv3_av_round_rate,
|
|
.set_rate = clk_pllv3_av_set_rate,
|
|
};
|
|
|
|
struct clk_pllv3_vf610_mf {
|
|
u32 mfi; /* integer part, can be 20 or 22 */
|
|
u32 mfn; /* numerator, 30-bit value */
|
|
u32 mfd; /* denominator, 30-bit value, must be less than mfn */
|
|
};
|
|
|
|
static unsigned long clk_pllv3_vf610_mf_to_rate(unsigned long parent_rate,
|
|
struct clk_pllv3_vf610_mf mf)
|
|
{
|
|
u64 temp64;
|
|
|
|
temp64 = parent_rate;
|
|
temp64 *= mf.mfn;
|
|
do_div(temp64, mf.mfd);
|
|
|
|
return (parent_rate * mf.mfi) + temp64;
|
|
}
|
|
|
|
static struct clk_pllv3_vf610_mf clk_pllv3_vf610_rate_to_mf(
|
|
unsigned long parent_rate, unsigned long rate)
|
|
{
|
|
struct clk_pllv3_vf610_mf mf;
|
|
u64 temp64;
|
|
|
|
mf.mfi = (rate >= 22 * parent_rate) ? 22 : 20;
|
|
mf.mfd = 0x3fffffff; /* use max supported value for best accuracy */
|
|
|
|
if (rate <= parent_rate * mf.mfi)
|
|
mf.mfn = 0;
|
|
else if (rate >= parent_rate * (mf.mfi + 1))
|
|
mf.mfn = mf.mfd - 1;
|
|
else {
|
|
/* rate = parent_rate * (mfi + mfn/mfd) */
|
|
temp64 = rate - parent_rate * mf.mfi;
|
|
temp64 *= mf.mfd;
|
|
do_div(temp64, parent_rate);
|
|
mf.mfn = temp64;
|
|
}
|
|
|
|
return mf;
|
|
}
|
|
|
|
static unsigned long clk_pllv3_vf610_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
struct clk_pllv3_vf610_mf mf;
|
|
|
|
mf.mfn = readl_relaxed(pll->base + pll->num_offset);
|
|
mf.mfd = readl_relaxed(pll->base + pll->denom_offset);
|
|
mf.mfi = (readl_relaxed(pll->base) & pll->div_mask) ? 22 : 20;
|
|
|
|
return clk_pllv3_vf610_mf_to_rate(parent_rate, mf);
|
|
}
|
|
|
|
static long clk_pllv3_vf610_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct clk_pllv3_vf610_mf mf = clk_pllv3_vf610_rate_to_mf(*prate, rate);
|
|
|
|
return clk_pllv3_vf610_mf_to_rate(*prate, mf);
|
|
}
|
|
|
|
static int clk_pllv3_vf610_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
struct clk_pllv3_vf610_mf mf =
|
|
clk_pllv3_vf610_rate_to_mf(parent_rate, rate);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(pll->base);
|
|
if (mf.mfi == 20)
|
|
val &= ~pll->div_mask; /* clear bit for mfi=20 */
|
|
else
|
|
val |= pll->div_mask; /* set bit for mfi=22 */
|
|
writel_relaxed(val, pll->base);
|
|
|
|
writel_relaxed(mf.mfn, pll->base + pll->num_offset);
|
|
writel_relaxed(mf.mfd, pll->base + pll->denom_offset);
|
|
|
|
return clk_pllv3_wait_lock(pll);
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_vf610_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.is_prepared = clk_pllv3_is_prepared,
|
|
.recalc_rate = clk_pllv3_vf610_recalc_rate,
|
|
.round_rate = clk_pllv3_vf610_round_rate,
|
|
.set_rate = clk_pllv3_vf610_set_rate,
|
|
};
|
|
|
|
static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pllv3 *pll = to_clk_pllv3(hw);
|
|
|
|
return pll->ref_clock;
|
|
}
|
|
|
|
static const struct clk_ops clk_pllv3_enet_ops = {
|
|
.prepare = clk_pllv3_prepare,
|
|
.unprepare = clk_pllv3_unprepare,
|
|
.is_prepared = clk_pllv3_is_prepared,
|
|
.recalc_rate = clk_pllv3_enet_recalc_rate,
|
|
};
|
|
|
|
struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
|
|
const char *parent_name, void __iomem *base,
|
|
u32 div_mask)
|
|
{
|
|
struct clk_pllv3 *pll;
|
|
const struct clk_ops *ops;
|
|
struct clk *clk;
|
|
struct clk_init_data init;
|
|
|
|
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
|
|
if (!pll)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pll->power_bit = BM_PLL_POWER;
|
|
pll->num_offset = PLL_NUM_OFFSET;
|
|
pll->denom_offset = PLL_DENOM_OFFSET;
|
|
|
|
switch (type) {
|
|
case IMX_PLLV3_SYS:
|
|
ops = &clk_pllv3_sys_ops;
|
|
break;
|
|
case IMX_PLLV3_SYS_VF610:
|
|
ops = &clk_pllv3_vf610_ops;
|
|
pll->num_offset = PLL_VF610_NUM_OFFSET;
|
|
pll->denom_offset = PLL_VF610_DENOM_OFFSET;
|
|
break;
|
|
case IMX_PLLV3_USB_VF610:
|
|
pll->div_shift = 1;
|
|
/* fall through */
|
|
case IMX_PLLV3_USB:
|
|
ops = &clk_pllv3_ops;
|
|
pll->powerup_set = true;
|
|
break;
|
|
case IMX_PLLV3_AV_IMX7:
|
|
pll->num_offset = PLL_IMX7_NUM_OFFSET;
|
|
pll->denom_offset = PLL_IMX7_DENOM_OFFSET;
|
|
/* fall through */
|
|
case IMX_PLLV3_AV:
|
|
ops = &clk_pllv3_av_ops;
|
|
break;
|
|
case IMX_PLLV3_ENET_IMX7:
|
|
pll->power_bit = IMX7_ENET_PLL_POWER;
|
|
pll->ref_clock = 1000000000;
|
|
ops = &clk_pllv3_enet_ops;
|
|
break;
|
|
case IMX_PLLV3_ENET:
|
|
pll->ref_clock = 500000000;
|
|
ops = &clk_pllv3_enet_ops;
|
|
break;
|
|
case IMX_PLLV3_DDR_IMX7:
|
|
pll->power_bit = IMX7_DDR_PLL_POWER;
|
|
pll->num_offset = PLL_IMX7_NUM_OFFSET;
|
|
pll->denom_offset = PLL_IMX7_DENOM_OFFSET;
|
|
ops = &clk_pllv3_av_ops;
|
|
break;
|
|
default:
|
|
ops = &clk_pllv3_ops;
|
|
}
|
|
pll->base = base;
|
|
pll->div_mask = div_mask;
|
|
|
|
init.name = name;
|
|
init.ops = ops;
|
|
init.flags = 0;
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
|
|
pll->hw.init = &init;
|
|
|
|
clk = clk_register(NULL, &pll->hw);
|
|
if (IS_ERR(clk))
|
|
kfree(pll);
|
|
|
|
return clk;
|
|
}
|