forked from Minki/linux
d1cbfd771c
In order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers, this patch provides simple PTP stub functions to allow linkage of those drivers into the kernel even when the PTP subsystem is configured out. Drivers must be ready to accept NULL from ptp_clock_register() in that case. And to make it possible for PTP to be configured out, the select statement in those driver's Kconfig menu entries is converted to the new "imply" statement. This way the PTP subsystem may have Kconfig dependencies of its own, such as POSIX_TIMERS, without having to make those ethernet drivers unavailable if POSIX timers are cconfigured out. And when support for POSIX timers is selected again then the default config option for PTP clock support will automatically be adjusted accordingly. The pch_gbe driver is a bit special as it relies on extra code in drivers/ptp/ptp_pch.c. Therefore we let the make process descend into drivers/ptp/ even if PTP_1588_CLOCK is unselected. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/1478841010-28605-4-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
279 lines
8.6 KiB
Plaintext
279 lines
8.6 KiB
Plaintext
#
|
|
# Intel network device configuration
|
|
#
|
|
|
|
config NET_VENDOR_INTEL
|
|
bool "Intel devices"
|
|
default y
|
|
---help---
|
|
If you have a network (Ethernet) card belonging to this class, say Y.
|
|
|
|
Note that the answer to this question doesn't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about Intel cards. If you say Y, you will be asked for
|
|
your specific card in the following questions.
|
|
|
|
if NET_VENDOR_INTEL
|
|
|
|
config E100
|
|
tristate "Intel(R) PRO/100+ support"
|
|
depends on PCI
|
|
select MII
|
|
---help---
|
|
This driver supports Intel(R) PRO/100 family of adapters.
|
|
To verify that your adapter is supported, find the board ID number
|
|
on the adapter. Look for a label that has a barcode and a number
|
|
in the format 123456-001 (six digits hyphen three digits).
|
|
|
|
Use the above information and the Adapter & Driver ID Guide that
|
|
can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
to identify the adapter.
|
|
|
|
More specific information on configuring the driver is in
|
|
<file:Documentation/networking/e100.txt>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called e100.
|
|
|
|
config E1000
|
|
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
|
|
depends on PCI
|
|
---help---
|
|
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
|
|
adapters. For more information on how to identify your adapter, go
|
|
to the Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
More specific information on configuring the driver is in
|
|
<file:Documentation/networking/e1000.txt>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called e1000.
|
|
|
|
config E1000E
|
|
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
|
|
depends on PCI && (!SPARC32 || BROKEN)
|
|
select CRC32
|
|
imply PTP_1588_CLOCK
|
|
---help---
|
|
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
|
|
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
|
|
use the regular e1000 driver For more information on how to
|
|
identify your adapter, go to the Adapter & Driver ID Guide that
|
|
can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called e1000e.
|
|
|
|
config E1000E_HWTS
|
|
bool "Support HW cross-timestamp on PCH devices"
|
|
default y
|
|
depends on E1000E && X86
|
|
---help---
|
|
Say Y to enable hardware supported cross-timestamping on PCH
|
|
devices. The cross-timestamp is available through the PTP clock
|
|
driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
|
|
|
|
config IGB
|
|
tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
|
|
depends on PCI
|
|
imply PTP_1588_CLOCK
|
|
select I2C
|
|
select I2C_ALGOBIT
|
|
---help---
|
|
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
|
|
adapters. For more information on how to identify your adapter, go
|
|
to the Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
More specific information on configuring the driver is in
|
|
<file:Documentation/networking/e1000.txt>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called igb.
|
|
|
|
config IGB_HWMON
|
|
bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
|
|
default y
|
|
depends on IGB && HWMON && !(IGB=y && HWMON=m)
|
|
---help---
|
|
Say Y if you want to expose thermal sensor data on Intel devices.
|
|
|
|
Some of our devices contain thermal sensors, both external and internal.
|
|
This data is available via the hwmon sysfs interface and exposes
|
|
the onboard sensors.
|
|
|
|
config IGB_DCA
|
|
bool "Direct Cache Access (DCA) Support"
|
|
default y
|
|
depends on IGB && DCA && !(IGB=y && DCA=m)
|
|
---help---
|
|
Say Y here if you want to use Direct Cache Access (DCA) in the
|
|
driver. DCA is a method for warming the CPU cache before data
|
|
is used, with the intent of lessening the impact of cache misses.
|
|
|
|
config IGBVF
|
|
tristate "Intel(R) 82576 Virtual Function Ethernet support"
|
|
depends on PCI
|
|
---help---
|
|
This driver supports Intel(R) 82576 virtual functions. For more
|
|
information on how to identify your adapter, go to the Adapter &
|
|
Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
More specific information on configuring the driver is in
|
|
<file:Documentation/networking/e1000.txt>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called igbvf.
|
|
|
|
config IXGB
|
|
tristate "Intel(R) PRO/10GbE support"
|
|
depends on PCI
|
|
---help---
|
|
This driver supports Intel(R) PRO/10GbE family of adapters for
|
|
PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
|
|
instead. For more information on how to identify your adapter, go
|
|
to the Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
More specific information on configuring the driver is in
|
|
<file:Documentation/networking/ixgb.txt>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called ixgb.
|
|
|
|
config IXGBE
|
|
tristate "Intel(R) 10GbE PCI Express adapters support"
|
|
depends on PCI
|
|
select MDIO
|
|
imply PTP_1588_CLOCK
|
|
---help---
|
|
This driver supports Intel(R) 10GbE PCI Express family of
|
|
adapters. For more information on how to identify your adapter, go
|
|
to the Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called ixgbe.
|
|
|
|
config IXGBE_HWMON
|
|
bool "Intel(R) 10GbE PCI Express adapters HWMON support"
|
|
default y
|
|
depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
|
|
---help---
|
|
Say Y if you want to expose the thermal sensor data on some of
|
|
our cards, via a hwmon sysfs interface.
|
|
|
|
config IXGBE_DCA
|
|
bool "Direct Cache Access (DCA) Support"
|
|
default y
|
|
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
|
|
---help---
|
|
Say Y here if you want to use Direct Cache Access (DCA) in the
|
|
driver. DCA is a method for warming the CPU cache before data
|
|
is used, with the intent of lessening the impact of cache misses.
|
|
|
|
config IXGBE_DCB
|
|
bool "Data Center Bridging (DCB) Support"
|
|
default n
|
|
depends on IXGBE && DCB
|
|
---help---
|
|
Say Y here if you want to use Data Center Bridging (DCB) in the
|
|
driver.
|
|
|
|
If unsure, say N.
|
|
|
|
config IXGBEVF
|
|
tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
|
|
depends on PCI_MSI
|
|
---help---
|
|
This driver supports Intel(R) PCI Express virtual functions for the
|
|
Intel(R) ixgbe driver. For more information on how to identify your
|
|
adapter, go to the Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
More specific information on configuring the driver is in
|
|
<file:Documentation/networking/ixgbevf.txt>.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called ixgbevf. MSI-X interrupt support is required
|
|
for this driver to work correctly.
|
|
|
|
config I40E
|
|
tristate "Intel(R) Ethernet Controller XL710 Family support"
|
|
imply PTP_1588_CLOCK
|
|
depends on PCI
|
|
---help---
|
|
This driver supports Intel(R) Ethernet Controller XL710 Family of
|
|
devices. For more information on how to identify your adapter, go
|
|
to the Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called i40e.
|
|
|
|
config I40E_DCB
|
|
bool "Data Center Bridging (DCB) Support"
|
|
default n
|
|
depends on I40E && DCB
|
|
---help---
|
|
Say Y here if you want to use Data Center Bridging (DCB) in the
|
|
driver.
|
|
|
|
If unsure, say N.
|
|
|
|
config I40E_FCOE
|
|
bool "Fibre Channel over Ethernet (FCoE)"
|
|
default n
|
|
depends on I40E && DCB && FCOE
|
|
---help---
|
|
Say Y here if you want to use Fibre Channel over Ethernet (FCoE)
|
|
in the driver. This will create new netdev for exclusive FCoE
|
|
use with XL710 FCoE offloads enabled.
|
|
|
|
If unsure, say N.
|
|
|
|
config I40EVF
|
|
tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
|
|
depends on PCI_MSI
|
|
---help---
|
|
This driver supports Intel(R) XL710 and X710 virtual functions.
|
|
For more information on how to identify your adapter, go to the
|
|
Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called i40evf. MSI-X interrupt support is required
|
|
for this driver to work correctly.
|
|
|
|
config FM10K
|
|
tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
|
|
default n
|
|
depends on PCI_MSI
|
|
imply PTP_1588_CLOCK
|
|
---help---
|
|
This driver supports Intel(R) FM10000 Ethernet Switch Host
|
|
Interface. For more information on how to identify your adapter,
|
|
go to the Adapter & Driver ID Guide that can be located at:
|
|
|
|
<http://support.intel.com>
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called fm10k. MSI-X interrupt support is required
|
|
|
|
endif # NET_VENDOR_INTEL
|