forked from Minki/linux
0a9cb46a73
There already exists a big endian safe bitops implementation in lib/find_next_bit.c. The code in it is 90%+ common with the powerpc specific version, so the powerpc version is redundant. This patch makes the necessary changes to use the generic bitops in powerpc, and removes the powerpc specific version. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
1424 lines
38 KiB
Plaintext
1424 lines
38 KiB
Plaintext
# For a description of the syntax of this configuration file,
|
|
# see Documentation/kbuild/kconfig-language.txt.
|
|
#
|
|
|
|
mainmenu "Linux/PowerPC Kernel Configuration"
|
|
|
|
config MMU
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_HARDIRQS
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_HWEIGHT
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config PPC
|
|
bool
|
|
default y
|
|
|
|
config PPC32
|
|
bool
|
|
default y
|
|
|
|
# All PPCs use generic nvram driver through ppc_md
|
|
config GENERIC_NVRAM
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_FIND_NEXT_BIT
|
|
bool
|
|
default y
|
|
|
|
config SCHED_NO_NO_OMIT_FRAME_POINTER
|
|
bool
|
|
default y
|
|
|
|
config ARCH_MAY_HAVE_PC_FDC
|
|
bool
|
|
default y
|
|
|
|
source "init/Kconfig"
|
|
|
|
menu "Processor"
|
|
|
|
choice
|
|
prompt "Processor Type"
|
|
default 6xx
|
|
|
|
config 6xx
|
|
bool "6xx/7xx/74xx/52xx/82xx/83xx"
|
|
select PPC_FPU
|
|
help
|
|
There are four types of PowerPC chips supported. The more common
|
|
types (601, 603, 604, 740, 750, 7400), the older Freescale
|
|
(formerly Motorola) embedded versions (821, 823, 850, 855, 860,
|
|
52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
|
|
the Book E embedded processors from IBM (44x) and Freescale (85xx).
|
|
For support for 64-bit processors, set ARCH=powerpc.
|
|
Unless you are building a kernel for one of the embedded processor
|
|
systems, choose 6xx.
|
|
Also note that because the 52xx, 82xx, & 83xx family have a 603e
|
|
core, specific support for that chipset is asked later on.
|
|
|
|
config 40x
|
|
bool "40x"
|
|
|
|
config 44x
|
|
bool "44x"
|
|
|
|
config 8xx
|
|
bool "8xx"
|
|
|
|
config E200
|
|
bool "e200"
|
|
|
|
config E500
|
|
bool "e500"
|
|
|
|
endchoice
|
|
|
|
config PPC_FPU
|
|
bool
|
|
|
|
config BOOKE
|
|
bool
|
|
depends on E200 || E500
|
|
default y
|
|
|
|
config FSL_BOOKE
|
|
bool
|
|
depends on E200 || E500
|
|
default y
|
|
|
|
config PTE_64BIT
|
|
bool
|
|
depends on 44x || E500
|
|
default y if 44x
|
|
default y if E500 && PHYS_64BIT
|
|
|
|
config PHYS_64BIT
|
|
bool 'Large physical address support' if E500
|
|
depends on 44x || E500
|
|
default y if 44x
|
|
---help---
|
|
This option enables kernel support for larger than 32-bit physical
|
|
addresses. This features is not be available on all e500 cores.
|
|
|
|
If in doubt, say N here.
|
|
|
|
config ALTIVEC
|
|
bool "AltiVec Support"
|
|
depends on 6xx
|
|
depends on !8260 && !83xx
|
|
---help---
|
|
This option enables kernel support for the Altivec extensions to the
|
|
PowerPC processor. The kernel currently supports saving and restoring
|
|
altivec registers, and turning on the 'altivec enable' bit so user
|
|
processes can execute altivec instructions.
|
|
|
|
This option is only usefully if you have a processor that supports
|
|
altivec (G4, otherwise known as 74xx series), but does not have
|
|
any affect on a non-altivec cpu (it does, however add code to the
|
|
kernel).
|
|
|
|
If in doubt, say Y here.
|
|
|
|
config SPE
|
|
bool "SPE Support"
|
|
depends on E200 || E500
|
|
---help---
|
|
This option enables kernel support for the Signal Processing
|
|
Extensions (SPE) to the PowerPC processor. The kernel currently
|
|
supports saving and restoring SPE registers, and turning on the
|
|
'spe enable' bit so user processes can execute SPE instructions.
|
|
|
|
This option is only useful if you have a processor that supports
|
|
SPE (e500, otherwise known as 85xx series), but does not have any
|
|
effect on a non-spe cpu (it does, however add code to the kernel).
|
|
|
|
If in doubt, say Y here.
|
|
|
|
config TAU
|
|
bool "Thermal Management Support"
|
|
depends on 6xx && !8260 && !83xx
|
|
help
|
|
G3 and G4 processors have an on-chip temperature sensor called the
|
|
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
|
|
temperature within 2-4 degrees Celsius. This option shows the current
|
|
on-die temperature in /proc/cpuinfo if the cpu supports it.
|
|
|
|
Unfortunately, on some chip revisions, this sensor is very inaccurate
|
|
and in some cases, does not work at all, so don't assume the cpu
|
|
temp is actually what /proc/cpuinfo says it is.
|
|
|
|
config TAU_INT
|
|
bool "Interrupt driven TAU driver (DANGEROUS)"
|
|
depends on TAU
|
|
---help---
|
|
The TAU supports an interrupt driven mode which causes an interrupt
|
|
whenever the temperature goes out of range. This is the fastest way
|
|
to get notified the temp has exceeded a range. With this option off,
|
|
a timer is used to re-check the temperature periodically.
|
|
|
|
However, on some cpus it appears that the TAU interrupt hardware
|
|
is buggy and can cause a situation which would lead unexplained hard
|
|
lockups.
|
|
|
|
Unless you are extending the TAU driver, or enjoy kernel/hardware
|
|
debugging, leave this option off.
|
|
|
|
config TAU_AVERAGE
|
|
bool "Average high and low temp"
|
|
depends on TAU
|
|
---help---
|
|
The TAU hardware can compare the temperature to an upper and lower
|
|
bound. The default behavior is to show both the upper and lower
|
|
bound in /proc/cpuinfo. If the range is large, the temperature is
|
|
either changing a lot, or the TAU hardware is broken (likely on some
|
|
G4's). If the range is small (around 4 degrees), the temperature is
|
|
relatively stable. If you say Y here, a single temperature value,
|
|
halfway between the upper and lower bounds, will be reported in
|
|
/proc/cpuinfo.
|
|
|
|
If in doubt, say N here.
|
|
|
|
config MATH_EMULATION
|
|
bool "Math emulation"
|
|
depends on 4xx || 8xx || E200 || E500
|
|
---help---
|
|
Some PowerPC chips designed for embedded applications do not have
|
|
a floating-point unit and therefore do not implement the
|
|
floating-point instructions in the PowerPC instruction set. If you
|
|
say Y here, the kernel will include code to emulate a floating-point
|
|
unit, which will allow programs that use floating-point
|
|
instructions to run.
|
|
|
|
If you have an Apple machine or an IBM RS/6000 or pSeries machine,
|
|
or any machine with a 6xx, 7xx or 7xxx series processor, say N
|
|
here. Saying Y here will not hurt performance (on any machine) but
|
|
will increase the size of the kernel.
|
|
|
|
config KEXEC
|
|
bool "kexec system call (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
kexec is a system call that implements the ability to shutdown your
|
|
current kernel, and to start another kernel. It is like a reboot
|
|
but it is indepedent of the system firmware. And like a reboot
|
|
you can start any kernel with it, not just Linux.
|
|
|
|
The name comes from the similiarity to the exec system call.
|
|
|
|
It is an ongoing process to be certain the hardware in a machine
|
|
is properly shutdown, so do not be surprised if this code does not
|
|
initially work for you. It may help to enable device hotplugging
|
|
support. As of this writing the exact hardware interface is
|
|
strongly in flux, so no good recommendation can be made.
|
|
|
|
In the GameCube implementation, kexec allows you to load and
|
|
run DOL files, including kernel and homebrew DOLs.
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
config PPC601_SYNC_FIX
|
|
bool "Workarounds for PPC601 bugs"
|
|
depends on 6xx && PPC_PREP
|
|
help
|
|
Some versions of the PPC601 (the first PowerPC chip) have bugs which
|
|
mean that extra synchronization instructions are required near
|
|
certain instructions, typically those that make major changes to the
|
|
CPU state. These extra instructions reduce performance slightly.
|
|
If you say N here, these extra instructions will not be included,
|
|
resulting in a kernel which will run faster but may not run at all
|
|
on some systems with the PPC601 chip.
|
|
|
|
If in doubt, say Y here.
|
|
|
|
source arch/ppc/platforms/4xx/Kconfig
|
|
source arch/ppc/platforms/85xx/Kconfig
|
|
|
|
config PPC_STD_MMU
|
|
bool
|
|
depends on 6xx
|
|
default y
|
|
|
|
config NOT_COHERENT_CACHE
|
|
bool
|
|
depends on 4xx || 8xx || E200
|
|
default y
|
|
|
|
endmenu
|
|
|
|
menu "Platform options"
|
|
|
|
config FADS
|
|
bool
|
|
|
|
choice
|
|
prompt "8xx Machine Type"
|
|
depends on 8xx
|
|
default RPXLITE
|
|
|
|
config RPXLITE
|
|
bool "RPX-Lite"
|
|
---help---
|
|
Single-board computers based around the PowerPC MPC8xx chips and
|
|
intended for embedded applications. The following types are
|
|
supported:
|
|
|
|
RPX-Lite:
|
|
Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
|
|
|
|
RPX-Classic:
|
|
Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
|
|
the MPC 860
|
|
|
|
BSE-IP:
|
|
Bright Star Engineering ip-Engine.
|
|
|
|
TQM823L:
|
|
TQM850L:
|
|
TQM855L:
|
|
TQM860L:
|
|
MPC8xx based family of mini modules, half credit card size,
|
|
up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
|
|
2 x CAN bus interface, ...
|
|
Manufacturer: TQ Components, www.tq-group.de
|
|
Date of Release: October (?) 1999
|
|
End of Life: not yet :-)
|
|
URL:
|
|
- module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
|
|
- starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
|
|
- images: <http://www.denx.de/embedded-ppc-en.html>
|
|
|
|
FPS850L:
|
|
FingerPrint Sensor System (based on TQM850L)
|
|
Manufacturer: IKENDI AG, <http://www.ikendi.com/>
|
|
Date of Release: November 1999
|
|
End of life: end 2000 ?
|
|
URL: see TQM850L
|
|
|
|
IVMS8:
|
|
MPC860 based board used in the "Integrated Voice Mail System",
|
|
Small Version (8 voice channels)
|
|
Manufacturer: Speech Design, <http://www.speech-design.de/>
|
|
Date of Release: December 2000 (?)
|
|
End of life: -
|
|
URL: <http://www.speech-design.de/>
|
|
|
|
IVML24:
|
|
MPC860 based board used in the "Integrated Voice Mail System",
|
|
Large Version (24 voice channels)
|
|
Manufacturer: Speech Design, <http://www.speech-design.de/>
|
|
Date of Release: March 2001 (?)
|
|
End of life: -
|
|
URL: <http://www.speech-design.de/>
|
|
|
|
HERMES:
|
|
Hermes-Pro ISDN/LAN router with integrated 8 x hub
|
|
Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
|
|
<http://www.multidata.de/>
|
|
Date of Release: 2000 (?)
|
|
End of life: -
|
|
URL: <http://www.multidata.de/english/products/hpro.htm>
|
|
|
|
IP860:
|
|
VMEBus IP (Industry Pack) carrier board with MPC860
|
|
Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
|
|
Date of Release: ?
|
|
End of life: -
|
|
URL: <http://www.microsys.de/html/ip860.html>
|
|
|
|
PCU_E:
|
|
PCU = Peripheral Controller Unit, Extended
|
|
Manufacturer: Siemens AG, ICN (Information and Communication Networks)
|
|
<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
|
|
Date of Release: April 2001
|
|
End of life: August 2001
|
|
URL: n. a.
|
|
|
|
config RPXCLASSIC
|
|
bool "RPX-Classic"
|
|
help
|
|
The RPX-Classic is a single-board computer based on the Motorola
|
|
MPC860. It features 16MB of DRAM and a variable amount of flash,
|
|
I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
|
|
LEDs. Variants with Ethernet ports exist. Say Y here to support it
|
|
directly.
|
|
|
|
config BSEIP
|
|
bool "BSE-IP"
|
|
help
|
|
Say Y here to support the Bright Star Engineering ipEngine SBC.
|
|
This is a credit-card-sized device featuring a MPC823 processor,
|
|
26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
|
|
controller, and two RS232 ports.
|
|
|
|
config MPC8XXFADS
|
|
bool "FADS"
|
|
select FADS
|
|
|
|
config MPC86XADS
|
|
bool "MPC86XADS"
|
|
help
|
|
MPC86x Application Development System by Freescale Semiconductor.
|
|
The MPC86xADS is meant to serve as a platform for s/w and h/w
|
|
development around the MPC86X processor families.
|
|
select FADS
|
|
|
|
config MPC885ADS
|
|
bool "MPC885ADS"
|
|
help
|
|
Freescale Semiconductor MPC885 Application Development System (ADS).
|
|
Also known as DUET.
|
|
The MPC885ADS is meant to serve as a platform for s/w and h/w
|
|
development around the MPC885 processor family.
|
|
|
|
config TQM823L
|
|
bool "TQM823L"
|
|
help
|
|
Say Y here to support the TQM823L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config TQM850L
|
|
bool "TQM850L"
|
|
help
|
|
Say Y here to support the TQM850L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config TQM855L
|
|
bool "TQM855L"
|
|
help
|
|
Say Y here to support the TQM855L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config TQM860L
|
|
bool "TQM860L"
|
|
help
|
|
Say Y here to support the TQM860L, one of an MPC8xx-based family of
|
|
mini SBCs (half credit-card size) from TQ Components first released
|
|
in late 1999. Technical references are at
|
|
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
|
|
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
config FPS850L
|
|
bool "FPS850L"
|
|
|
|
config IVMS8
|
|
bool "IVMS8"
|
|
help
|
|
Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
|
|
from Speech Design, released March 2001. The manufacturer's website
|
|
is at <http://www.speech-design.de/>.
|
|
|
|
config IVML24
|
|
bool "IVML24"
|
|
help
|
|
Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
|
|
from Speech Design, released March 2001. The manufacturer's website
|
|
is at <http://www.speech-design.de/>.
|
|
|
|
config HERMES_PRO
|
|
bool "HERMES"
|
|
|
|
config IP860
|
|
bool "IP860"
|
|
|
|
config LWMON
|
|
bool "LWMON"
|
|
|
|
config PCU_E
|
|
bool "PCU_E"
|
|
|
|
config CCM
|
|
bool "CCM"
|
|
|
|
config LANTEC
|
|
bool "LANTEC"
|
|
|
|
config MBX
|
|
bool "MBX"
|
|
help
|
|
MBX is a line of Motorola single-board computer based around the
|
|
MPC821 and MPC860 processors, and intended for embedded-controller
|
|
applications. Say Y here to support these boards directly.
|
|
|
|
config WINCEPT
|
|
bool "WinCept"
|
|
help
|
|
The Wincept 100/110 is a Motorola single-board computer based on the
|
|
MPC821 PowerPC, introduced in 1998 and designed to be used in
|
|
thin-client machines. Say Y to support it directly.
|
|
|
|
endchoice
|
|
|
|
menu "Freescale Ethernet driver platform-specific options"
|
|
depends on FS_ENET
|
|
|
|
config MPC8xx_SECOND_ETH
|
|
bool "Second Ethernet channel"
|
|
depends on (MPC885ADS || MPC86XADS)
|
|
default y
|
|
help
|
|
This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
|
|
The latter will use SCC1, for 885ADS you can select it below.
|
|
|
|
choice
|
|
prompt "Second Ethernet channel"
|
|
depends on MPC8xx_SECOND_ETH
|
|
default MPC8xx_SECOND_ETH_FEC2
|
|
|
|
config MPC8xx_SECOND_ETH_FEC2
|
|
bool "FEC2"
|
|
depends on MPC885ADS
|
|
help
|
|
Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
|
|
(often 2-nd UART) will not work if this is enabled.
|
|
|
|
config MPC8xx_SECOND_ETH_SCC1
|
|
bool "SCC1"
|
|
depends on MPC86XADS
|
|
select MPC8xx_SCC_ENET_FIXED
|
|
help
|
|
Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
|
|
(often 1-nd UART) will not work if this is enabled.
|
|
|
|
config MPC8xx_SECOND_ETH_SCC3
|
|
bool "SCC3"
|
|
depends on MPC885ADS
|
|
help
|
|
Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
|
|
(often 1-nd UART) will not work if this is enabled.
|
|
|
|
endchoice
|
|
|
|
config MPC8xx_SCC_ENET_FIXED
|
|
depends on MPC8xx_SECOND_ETH_SCC
|
|
default n
|
|
bool "Use fixed MII-less mode for SCC Ethernet"
|
|
|
|
endmenu
|
|
|
|
choice
|
|
prompt "Machine Type"
|
|
depends on 6xx
|
|
default PPC_PREP
|
|
---help---
|
|
Linux currently supports several different kinds of PowerPC-based
|
|
machines: Apple Power Macintoshes and clones (such as the Motorola
|
|
Starmax series), PReP (PowerPC Reference Platform) machines (such
|
|
as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
|
|
and some IBM RS/6000 systems), CHRP (Common Hardware Reference
|
|
Platform) machines (including all of the recent IBM RS/6000 and
|
|
pSeries machines), and several embedded PowerPC systems containing
|
|
4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
|
|
default option is to build a kernel which works on PReP.
|
|
|
|
Note that support for Apple and CHRP machines is now only available
|
|
with ARCH=powerpc, and has been removed from this menu. If you
|
|
wish to build a kernel for an Apple or CHRP machine, exit this
|
|
configuration process and re-run it with ARCH=powerpc.
|
|
|
|
Select PReP if configuring for a PReP machine.
|
|
|
|
Select Gemini if configuring for a Synergy Microsystems' Gemini
|
|
series Single Board Computer. More information is available at:
|
|
<http://www.synergymicro.com/PressRel/97_10_15.html>.
|
|
|
|
Select APUS if configuring for a PowerUP Amiga. More information is
|
|
available at: <http://linux-apus.sourceforge.net/>.
|
|
|
|
config PPC_PREP
|
|
bool "PReP"
|
|
|
|
config APUS
|
|
bool "Amiga-APUS"
|
|
depends on BROKEN
|
|
help
|
|
Select APUS if configuring for a PowerUP Amiga.
|
|
More information is available at:
|
|
<http://linux-apus.sourceforge.net/>.
|
|
|
|
config KATANA
|
|
bool "Artesyn-Katana"
|
|
help
|
|
Select KATANA if configuring an Artesyn KATANA 750i or 3750
|
|
cPCI board.
|
|
|
|
config WILLOW
|
|
bool "Cogent-Willow"
|
|
|
|
config CPCI690
|
|
bool "Force-CPCI690"
|
|
help
|
|
Select CPCI690 if configuring a Force CPCI690 cPCI board.
|
|
|
|
config POWERPMC250
|
|
bool "Force-PowerPMC250"
|
|
|
|
config CHESTNUT
|
|
bool "IBM 750FX Eval board or 750GX Eval board"
|
|
help
|
|
Select CHESTNUT if configuring an IBM 750FX Eval Board or a
|
|
IBM 750GX Eval board.
|
|
|
|
config SPRUCE
|
|
bool "IBM-Spruce"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config HDPU
|
|
bool "Sky-HDPU"
|
|
help
|
|
Select HDPU if configuring a Sky Computers Compute Blade.
|
|
|
|
config HDPU_FEATURES
|
|
depends HDPU
|
|
tristate "HDPU-Features"
|
|
help
|
|
Select to enable HDPU enhanced features.
|
|
|
|
config EV64260
|
|
bool "Marvell-EV64260BP"
|
|
help
|
|
Select EV64260 if configuring a Marvell (formerly Galileo)
|
|
EV64260BP Evaluation platform.
|
|
|
|
config LOPEC
|
|
bool "Motorola-LoPEC"
|
|
select PPC_I8259
|
|
|
|
config MVME5100
|
|
bool "Motorola-MVME5100"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PPLUS
|
|
bool "Motorola-PowerPlus"
|
|
select PPC_I8259
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PRPMC750
|
|
bool "Motorola-PrPMC750"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config PRPMC800
|
|
bool "Motorola-PrPMC800"
|
|
select PPC_INDIRECT_PCI
|
|
|
|
config SANDPOINT
|
|
bool "Motorola-Sandpoint"
|
|
select PPC_I8259
|
|
help
|
|
Select SANDPOINT if configuring for a Motorola Sandpoint X3
|
|
(any flavor).
|
|
|
|
config RADSTONE_PPC7D
|
|
bool "Radstone Technology PPC7D board"
|
|
select PPC_I8259
|
|
|
|
config PAL4
|
|
bool "SBS-Palomar4"
|
|
|
|
config GEMINI
|
|
bool "Synergy-Gemini"
|
|
depends on BROKEN
|
|
select PPC_INDIRECT_PCI
|
|
help
|
|
Select Gemini if configuring for a Synergy Microsystems' Gemini
|
|
series Single Board Computer. More information is available at:
|
|
<http://www.synergymicro.com/PressRel/97_10_15.html>.
|
|
|
|
config EST8260
|
|
bool "EST8260"
|
|
---help---
|
|
The EST8260 is a single-board computer manufactured by Wind River
|
|
Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
|
|
the MPC8260. Wind River Systems has a website at
|
|
<http://www.windriver.com/>, but the EST8260 cannot be found on it
|
|
and has probably been discontinued or rebadged.
|
|
|
|
config SBC82xx
|
|
bool "SBC82xx"
|
|
---help---
|
|
SBC PowerQUICC II, single-board computer with MPC82xx CPU
|
|
Manufacturer: Wind River Systems, Inc.
|
|
Date of Release: May 2003
|
|
End of Life: -
|
|
URL: <http://www.windriver.com/>
|
|
|
|
config SBS8260
|
|
bool "SBS8260"
|
|
|
|
config RPX8260
|
|
bool "RPXSUPER"
|
|
|
|
config TQM8260
|
|
bool "TQM8260"
|
|
---help---
|
|
MPC8260 based module, little larger than credit card,
|
|
up to 128 MB global + 64 MB local RAM, 32 MB Flash,
|
|
32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
|
|
2 x serial ports, ...
|
|
Manufacturer: TQ Components, www.tq-group.de
|
|
Date of Release: June 2001
|
|
End of Life: not yet :-)
|
|
URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
|
|
|
|
config ADS8272
|
|
bool "ADS8272"
|
|
|
|
config PQ2FADS
|
|
bool "Freescale-PQ2FADS"
|
|
help
|
|
Select PQ2FADS if you wish to configure for a Freescale
|
|
PQ2FADS board (-VR or -ZU).
|
|
|
|
config LITE5200
|
|
bool "Freescale LITE5200 / (IceCube)"
|
|
select PPC_MPC52xx
|
|
help
|
|
Support for the LITE5200 dev board for the MPC5200 from Freescale.
|
|
This is for the LITE5200 version 2.0 board. Don't know if it changes
|
|
much but it's only been tested on this board version. I think this
|
|
board is also known as IceCube.
|
|
|
|
config LITE5200B
|
|
bool "Freescale LITE5200B"
|
|
depends LITE5200
|
|
help
|
|
Support for the LITE5200B dev board for the MPC5200 from Freescale.
|
|
This is the new board with 2 PCI slots.
|
|
|
|
config MPC834x_SYS
|
|
bool "Freescale MPC834x SYS"
|
|
help
|
|
This option enables support for the MPC 834x SYS evaluation board.
|
|
|
|
Be aware that PCI buses can only function when SYS board is plugged
|
|
into the PIB (Platform IO Board) board from Freescale which provide
|
|
3 PCI slots. The PIBs PCI initialization is the bootloader's
|
|
responsiblilty.
|
|
|
|
config EV64360
|
|
bool "Marvell-EV64360BP"
|
|
help
|
|
Select EV64360 if configuring a Marvell EV64360BP Evaluation
|
|
platform.
|
|
endchoice
|
|
|
|
config PQ2ADS
|
|
bool
|
|
depends on ADS8272
|
|
default y
|
|
|
|
config TQM8xxL
|
|
bool
|
|
depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
|
|
default y
|
|
|
|
config EMBEDDEDBOOT
|
|
bool
|
|
depends on 8xx || 8260
|
|
default y
|
|
|
|
config PPC_MPC52xx
|
|
bool
|
|
|
|
config 8260
|
|
bool "CPM2 Support" if WILLOW
|
|
depends on 6xx
|
|
default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
|
|
help
|
|
The MPC8260 is a typical embedded CPU made by Motorola. Selecting
|
|
this option means that you wish to build a kernel for a machine with
|
|
an 8260 class CPU.
|
|
|
|
config 8272
|
|
bool
|
|
depends on 6xx
|
|
default y if ADS8272
|
|
select 8260
|
|
help
|
|
The MPC8272 CPM has a different internal dpram setup than other CPM2
|
|
devices
|
|
|
|
config 83xx
|
|
bool
|
|
default y if MPC834x_SYS
|
|
|
|
config MPC834x
|
|
bool
|
|
default y if MPC834x_SYS
|
|
|
|
config PPC_83xx
|
|
bool
|
|
default y if 83xx
|
|
|
|
config CPM1
|
|
bool
|
|
depends on 8xx
|
|
default y
|
|
help
|
|
The CPM1 (Communications Processor Module) is a coprocessor on
|
|
embedded CPUs made by Motorola. Selecting this option means that
|
|
you wish to build a kernel for a machine with a CPM1 coprocessor
|
|
on it (8xx, 827x, 8560).
|
|
|
|
config CPM2
|
|
bool
|
|
depends on 8260 || MPC8560 || MPC8555
|
|
default y
|
|
help
|
|
The CPM2 (Communications Processor Module) is a coprocessor on
|
|
embedded CPUs made by Motorola. Selecting this option means that
|
|
you wish to build a kernel for a machine with a CPM2 coprocessor
|
|
on it (826x, 827x, 8560).
|
|
|
|
config PPC_GEN550
|
|
bool
|
|
depends on SANDPOINT || SPRUCE || PPLUS || \
|
|
PRPMC750 || PRPMC800 || LOPEC || \
|
|
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
|
|
83xx
|
|
default y
|
|
|
|
config FORCE
|
|
bool
|
|
depends on 6xx && POWERPMC250
|
|
default y
|
|
|
|
config GT64260
|
|
bool
|
|
depends on EV64260 || CPCI690
|
|
default y
|
|
|
|
config MV64360 # Really MV64360 & MV64460
|
|
bool
|
|
depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
|
|
default y
|
|
|
|
config MV64X60
|
|
bool
|
|
depends on (GT64260 || MV64360)
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
menu "Set bridge options"
|
|
depends on MV64X60
|
|
|
|
config NOT_COHERENT_CACHE
|
|
bool "Turn off Cache Coherency"
|
|
default n
|
|
help
|
|
Some 64x60 bridges lock up when trying to enforce cache coherency.
|
|
When this option is selected, cache coherency will be turned off.
|
|
Note that this can cause other problems (e.g., stale data being
|
|
speculatively loaded via a cached mapping). Use at your own risk.
|
|
|
|
config MV64X60_BASE
|
|
hex "Set bridge base used by firmware"
|
|
default "0xf1000000"
|
|
help
|
|
A firmware can leave the base address of the bridge's registers at
|
|
a non-standard location. If so, set this value to reflect the
|
|
address of that non-standard location.
|
|
|
|
config MV64X60_NEW_BASE
|
|
hex "Set bridge base used by kernel"
|
|
default "0xf1000000"
|
|
help
|
|
If the current base address of the bridge's registers is not where
|
|
you want it, set this value to the address that you want it moved to.
|
|
|
|
endmenu
|
|
|
|
config NONMONARCH_SUPPORT
|
|
bool "Enable Non-Monarch Support"
|
|
depends on PRPMC800
|
|
|
|
config HARRIER
|
|
bool
|
|
depends on PRPMC800
|
|
default y
|
|
|
|
config EPIC_SERIAL_MODE
|
|
bool
|
|
depends on 6xx && (LOPEC || SANDPOINT)
|
|
default y
|
|
|
|
config MPC10X_BRIDGE
|
|
bool
|
|
depends on POWERPMC250 || LOPEC || SANDPOINT
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config MPC10X_OPENPIC
|
|
bool
|
|
depends on POWERPMC250 || LOPEC || SANDPOINT
|
|
default y
|
|
|
|
config MPC10X_STORE_GATHERING
|
|
bool "Enable MPC10x store gathering"
|
|
depends on MPC10X_BRIDGE
|
|
|
|
config SANDPOINT_ENABLE_UART1
|
|
bool "Enable DUART mode on Sandpoint"
|
|
depends on SANDPOINT
|
|
help
|
|
If this option is enabled then the MPC824x processor will run
|
|
in DUART mode instead of UART mode.
|
|
|
|
config HARRIER_STORE_GATHERING
|
|
bool "Enable Harrier store gathering"
|
|
depends on HARRIER
|
|
|
|
config MVME5100_IPMC761_PRESENT
|
|
bool "MVME5100 configured with an IPMC761"
|
|
depends on MVME5100
|
|
select PPC_I8259
|
|
|
|
config SPRUCE_BAUD_33M
|
|
bool "Spruce baud clock support"
|
|
depends on SPRUCE
|
|
|
|
config PC_KEYBOARD
|
|
bool "PC PS/2 style Keyboard"
|
|
depends on 4xx || CPM2
|
|
|
|
config PPCBUG_NVRAM
|
|
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
|
|
default y if PPC_PREP
|
|
|
|
config SMP
|
|
depends on PPC_STD_MMU
|
|
bool "Symmetric multi-processing support"
|
|
---help---
|
|
This enables support for systems with more than one CPU. If you have
|
|
a system with only one CPU, say N. If you have a system with more
|
|
than one CPU, say Y. Note that the kernel does not currently
|
|
support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
|
|
since they have inadequate hardware support for multiprocessor
|
|
operation.
|
|
|
|
If you say N here, the kernel will run on single and multiprocessor
|
|
machines, but will use only one CPU of a multiprocessor machine. If
|
|
you say Y here, the kernel will run on single-processor machines.
|
|
On a single-processor machine, the kernel will run faster if you say
|
|
N here.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
config IRQ_ALL_CPUS
|
|
bool "Distribute interrupts on all CPUs by default"
|
|
depends on SMP && !MV64360
|
|
help
|
|
This option gives the kernel permission to distribute IRQs across
|
|
multiple CPUs. Saying N here will route all IRQs to the first
|
|
CPU. Generally saying Y is safe, although some problems have been
|
|
reported with SMP Power Macintoshes with this option enabled.
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-32)"
|
|
range 2 32
|
|
depends on SMP
|
|
default "4"
|
|
|
|
config HIGHMEM
|
|
bool "High memory support"
|
|
|
|
source kernel/Kconfig.hz
|
|
source kernel/Kconfig.preempt
|
|
source "mm/Kconfig"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
config PREP_RESIDUAL
|
|
bool "Support for PReP Residual Data"
|
|
depends on PPC_PREP
|
|
help
|
|
Some PReP systems have residual data passed to the kernel by the
|
|
firmware. This allows detection of memory size, devices present and
|
|
other useful pieces of information. Sometimes this information is
|
|
not present or incorrect, in which case it could lead to the machine
|
|
behaving incorrectly. If this happens, either disable PREP_RESIDUAL
|
|
or pass the 'noresidual' option to the kernel.
|
|
|
|
If you are running a PReP system, say Y here, otherwise say N.
|
|
|
|
config PROC_PREPRESIDUAL
|
|
bool "Support for reading of PReP Residual Data in /proc"
|
|
depends on PREP_RESIDUAL && PROC_FS
|
|
help
|
|
Enabling this option will create a /proc/residual file which allows
|
|
you to get at the residual data on PReP systems. You will need a tool
|
|
(lsresidual) to parse it. If you aren't on a PReP system, you don't
|
|
want this.
|
|
|
|
config CMDLINE_BOOL
|
|
bool "Default bootloader kernel arguments"
|
|
|
|
config CMDLINE
|
|
string "Initial kernel command string"
|
|
depends on CMDLINE_BOOL
|
|
default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
|
|
help
|
|
On some platforms, there is currently no way for the boot loader to
|
|
pass arguments to the kernel. For these platforms, you can supply
|
|
some command-line options at build time by entering them here. In
|
|
most cases you will need to specify the root device here.
|
|
|
|
config AMIGA
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
help
|
|
This option enables support for the Amiga series of computers.
|
|
|
|
config ZORRO
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
help
|
|
This enables support for the Zorro bus in the Amiga. If you have
|
|
expansion cards in your Amiga that conform to the Amiga
|
|
AutoConfig(tm) specification, say Y, otherwise N. Note that even
|
|
expansion cards that do not fit in the Zorro slots but fit in e.g.
|
|
the CPU slot may fall in this category, so you have to say Y to let
|
|
Linux use these.
|
|
|
|
config ABSTRACT_CONSOLE
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
|
|
config APUS_FAST_EXCEPT
|
|
bool
|
|
depends on APUS
|
|
default y
|
|
|
|
config AMIGA_PCMCIA
|
|
bool "Amiga 1200/600 PCMCIA support"
|
|
depends on APUS && EXPERIMENTAL
|
|
help
|
|
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
|
|
600. If you intend to use pcmcia cards say Y; otherwise say N.
|
|
|
|
config AMIGA_BUILTIN_SERIAL
|
|
tristate "Amiga builtin serial support"
|
|
depends on APUS
|
|
help
|
|
If you want to use your Amiga's built-in serial port in Linux,
|
|
answer Y.
|
|
|
|
To compile this driver as a module, choose M here.
|
|
|
|
config GVPIOEXT
|
|
tristate "GVP IO-Extender support"
|
|
depends on APUS
|
|
help
|
|
If you want to use a GVP IO-Extender serial card in Linux, say Y.
|
|
Otherwise, say N.
|
|
|
|
config GVPIOEXT_LP
|
|
tristate "GVP IO-Extender parallel printer support"
|
|
depends on GVPIOEXT
|
|
help
|
|
Say Y to enable driving a printer from the parallel port on your
|
|
GVP IO-Extender card, N otherwise.
|
|
|
|
config GVPIOEXT_PLIP
|
|
tristate "GVP IO-Extender PLIP support"
|
|
depends on GVPIOEXT
|
|
help
|
|
Say Y to enable doing IP over the parallel port on your GVP
|
|
IO-Extender card, N otherwise.
|
|
|
|
config MULTIFACE_III_TTY
|
|
tristate "Multiface Card III serial support"
|
|
depends on APUS
|
|
help
|
|
If you want to use a Multiface III card's serial port in Linux,
|
|
answer Y.
|
|
|
|
To compile this driver as a module, choose M here.
|
|
|
|
config A2232
|
|
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && APUS
|
|
---help---
|
|
This option supports the 2232 7-port serial card shipped with the
|
|
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
|
|
a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
|
|
each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
|
|
ports were connected with 8 pin DIN connectors on the card bracket,
|
|
for which 8 pin to DB25 adapters were supplied. The card also had
|
|
jumpers internally to toggle various pinning configurations.
|
|
|
|
This driver can be built as a module; but then "generic_serial"
|
|
will also be built as a module. This has to be loaded before
|
|
"ser_a2232". If you want to do this, answer M here.
|
|
|
|
config WHIPPET_SERIAL
|
|
tristate "Hisoft Whippet PCMCIA serial support"
|
|
depends on AMIGA_PCMCIA
|
|
help
|
|
HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
|
|
is no listing for the Whippet in their Amiga section.
|
|
|
|
config APNE
|
|
tristate "PCMCIA NE2000 support"
|
|
depends on AMIGA_PCMCIA
|
|
help
|
|
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
|
|
say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called apne.
|
|
|
|
config SERIAL_CONSOLE
|
|
bool "Support for serial port console"
|
|
depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
|
|
|
|
config HEARTBEAT
|
|
bool "Use power LED as a heartbeat"
|
|
depends on APUS
|
|
help
|
|
Use the power-on LED on your machine as a load meter. The exact
|
|
behavior is platform-dependent, but normally the flash frequency is
|
|
a hyperbolic function of the 5-minute load average.
|
|
|
|
config PROC_HARDWARE
|
|
bool "/proc/hardware support"
|
|
depends on APUS
|
|
|
|
source "drivers/zorro/Kconfig"
|
|
|
|
if !44x || BROKEN
|
|
source kernel/power/Kconfig
|
|
endif
|
|
|
|
config SECCOMP
|
|
bool "Enable seccomp to safely compute untrusted bytecode"
|
|
depends on PROC_FS
|
|
default y
|
|
help
|
|
This kernel feature is useful for number crunching applications
|
|
that may need to compute untrusted bytecode during their
|
|
execution. By using pipes or other transports made available to
|
|
the process as file descriptors supporting the read/write
|
|
syscalls, it's possible to isolate those applications in
|
|
their own address space using seccomp. Once seccomp is
|
|
enabled via /proc/<pid>/seccomp, it cannot be disabled
|
|
and the task is only allowed to execute a few safe syscalls
|
|
defined by each seccomp mode.
|
|
|
|
If unsure, say Y. Only embedded should say N here.
|
|
|
|
endmenu
|
|
|
|
config ISA_DMA_API
|
|
bool
|
|
default y
|
|
|
|
menu "Bus options"
|
|
|
|
config ISA
|
|
bool "Support for ISA-bus hardware"
|
|
depends on PPC_PREP
|
|
help
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
inside your box. If you have an Apple machine, say N here; if you
|
|
have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
|
|
you have an embedded board, consult your board documentation.
|
|
|
|
config GENERIC_ISA_DMA
|
|
bool
|
|
depends on 6xx && !CPM2
|
|
default y
|
|
|
|
config PPC_I8259
|
|
bool
|
|
default y if 85xx || PPC_PREP
|
|
default n
|
|
|
|
config PPC_INDIRECT_PCI
|
|
bool
|
|
depends on PCI
|
|
default y if 40x || 44x || 85xx || 83xx || PPC_PREP
|
|
default n
|
|
|
|
config EISA
|
|
bool
|
|
help
|
|
The Extended Industry Standard Architecture (EISA) bus is a bus
|
|
architecture used on some older intel-based PCs.
|
|
|
|
config SBUS
|
|
bool
|
|
|
|
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
|
|
config MCA
|
|
bool
|
|
|
|
config PCI
|
|
bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
|
|
default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
|
|
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
|
|
default PCI_QSPAN if !4xx && !CPM2 && 8xx
|
|
help
|
|
Find out whether your system includes a PCI bus. PCI is the name of
|
|
a bus system, i.e. the way the CPU talks to the other stuff inside
|
|
your box. If you say Y here, the kernel will include drivers and
|
|
infrastructure code to support PCI bus devices.
|
|
|
|
config PCI_DOMAINS
|
|
bool
|
|
default PCI
|
|
|
|
config MPC83xx_PCI2
|
|
bool " Supprt for 2nd PCI host controller"
|
|
depends on PCI && MPC834x
|
|
default y if MPC834x_SYS
|
|
|
|
config PCI_QSPAN
|
|
bool "QSpan PCI"
|
|
depends on !4xx && !CPM2 && 8xx
|
|
select PPC_I8259
|
|
help
|
|
Say Y here if you have a system based on a Motorola 8xx-series
|
|
embedded processor with a QSPAN PCI interface, otherwise say N.
|
|
|
|
config PCI_8260
|
|
bool
|
|
depends on PCI && 8260
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config 8260_PCI9
|
|
bool " Enable workaround for MPC826x erratum PCI 9"
|
|
depends on PCI_8260 && !ADS8272
|
|
default y
|
|
|
|
choice
|
|
prompt " IDMA channel for PCI 9 workaround"
|
|
depends on 8260_PCI9
|
|
|
|
config 8260_PCI9_IDMA1
|
|
bool "IDMA1"
|
|
|
|
config 8260_PCI9_IDMA2
|
|
bool "IDMA2"
|
|
|
|
config 8260_PCI9_IDMA3
|
|
bool "IDMA3"
|
|
|
|
config 8260_PCI9_IDMA4
|
|
bool "IDMA4"
|
|
|
|
endchoice
|
|
|
|
config PCI_PERMEDIA
|
|
bool "PCI for Permedia2"
|
|
depends on !4xx && !8xx && APUS
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
config RAPIDIO
|
|
bool "RapidIO support" if MPC8540 || MPC8560
|
|
help
|
|
If you say Y here, the kernel will include drivers and
|
|
infrastructure code to support RapidIO interconnect devices.
|
|
|
|
source "drivers/rapidio/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Advanced setup"
|
|
|
|
config ADVANCED_OPTIONS
|
|
bool "Prompt for advanced kernel configuration options"
|
|
help
|
|
This option will enable prompting for a variety of advanced kernel
|
|
configuration options. These options can cause the kernel to not
|
|
work if they are set incorrectly, but can be used to optimize certain
|
|
aspects of kernel memory management.
|
|
|
|
Unless you know what you are doing, say N here.
|
|
|
|
comment "Default settings for advanced configuration options are used"
|
|
depends on !ADVANCED_OPTIONS
|
|
|
|
config HIGHMEM_START_BOOL
|
|
bool "Set high memory pool address"
|
|
depends on ADVANCED_OPTIONS && HIGHMEM
|
|
help
|
|
This option allows you to set the base address of the kernel virtual
|
|
area used to map high memory pages. This can be useful in
|
|
optimizing the layout of kernel virtual memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config HIGHMEM_START
|
|
hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
|
|
default "0xfe000000"
|
|
|
|
config LOWMEM_SIZE_BOOL
|
|
bool "Set maximum low memory"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the maximum amount of memory which
|
|
will be used as "low memory", that is, memory which the kernel can
|
|
access directly, without having to set up a kernel virtual mapping.
|
|
This can be useful in optimizing the layout of kernel virtual
|
|
memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config LOWMEM_SIZE
|
|
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
|
|
default "0x30000000"
|
|
|
|
config KERNEL_START_BOOL
|
|
bool "Set custom kernel base address"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the kernel virtual address at which
|
|
the kernel will map low memory (the kernel image will be linked at
|
|
this address). This can be useful in optimizing the virtual memory
|
|
layout of the system.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config KERNEL_START
|
|
hex "Virtual address of kernel base" if KERNEL_START_BOOL
|
|
default "0xc0000000"
|
|
|
|
config TASK_SIZE_BOOL
|
|
bool "Set custom user task size"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the amount of virtual address space
|
|
allocated to user tasks. This can be useful in optimizing the
|
|
virtual memory layout of the system.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config TASK_SIZE
|
|
hex "Size of user task space" if TASK_SIZE_BOOL
|
|
default "0x80000000"
|
|
|
|
config CONSISTENT_START_BOOL
|
|
bool "Set custom consistent memory pool address"
|
|
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
|
|
help
|
|
This option allows you to set the base virtual address
|
|
of the the consistent memory pool. This pool of virtual
|
|
memory is used to make consistent memory allocations.
|
|
|
|
config CONSISTENT_START
|
|
hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
|
|
default "0xff100000" if NOT_COHERENT_CACHE
|
|
|
|
config CONSISTENT_SIZE_BOOL
|
|
bool "Set custom consistent memory pool size"
|
|
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
|
|
help
|
|
This option allows you to set the size of the the
|
|
consistent memory pool. This pool of virtual memory
|
|
is used to make consistent memory allocations.
|
|
|
|
config CONSISTENT_SIZE
|
|
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
|
|
default "0x00200000" if NOT_COHERENT_CACHE
|
|
|
|
config BOOT_LOAD_BOOL
|
|
bool "Set the boot link/load address"
|
|
depends on ADVANCED_OPTIONS && !PPC_PREP
|
|
help
|
|
This option allows you to set the initial load address of the zImage
|
|
or zImage.initrd file. This can be useful if you are on a board
|
|
which has a small amount of memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config BOOT_LOAD
|
|
hex "Link/load address for booting" if BOOT_LOAD_BOOL
|
|
default "0x00400000" if 40x || 8xx || 8260
|
|
default "0x01000000" if 44x
|
|
default "0x00800000"
|
|
|
|
config PIN_TLB
|
|
bool "Pinned Kernel TLBs (860 ONLY)"
|
|
depends on ADVANCED_OPTIONS && 8xx
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/ppc/8xx_io/Kconfig"
|
|
|
|
source "arch/ppc/8260_io/Kconfig"
|
|
|
|
|
|
menu "IBM 40x options"
|
|
depends on 40x
|
|
|
|
config SERIAL_SICC
|
|
bool "SICC Serial port"
|
|
depends on STB03xxx
|
|
|
|
config UART1_DFLT_CONSOLE
|
|
bool
|
|
depends on SERIAL_SICC && UART0_TTYS1
|
|
default y
|
|
|
|
config SERIAL_SICC_CONSOLE
|
|
bool
|
|
depends on SERIAL_SICC && UART0_TTYS1
|
|
default y
|
|
|
|
endmenu
|
|
|
|
source "lib/Kconfig"
|
|
|
|
source "arch/powerpc/oprofile/Kconfig"
|
|
|
|
source "arch/ppc/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|