forked from Minki/linux
7383123647
This reverts commit6764e9f872Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Aug 27 15:44:06 2015 +0200 drm/i915: skip modeset if compatible for everyone. Bring back the i915.fastboot module parameter, disabled by default, due to backlight regression on Chromebook Pixel 2015. Apparently the firmware of the Chromebook in question enables the panel but disables backlight to avoid a brief garbage scanout upon loading the kernel/module. With fastboot, we leave the backlight untouched, in this case disabled. The user would have to do a modeset (i.e. not just crank up the brightness) to enable the backlight. There is no clean fix readily available, so get back to the drawing board by reverting. [N.B. The reference below is for when the thread was included on public lists, and some of the context had already been dropped by then.] Reported-and-tested-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com Fixes:6764e9f872("drm/i915: skip modeset if compatible for everyone.") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com
199 lines
8.0 KiB
C
199 lines
8.0 KiB
C
/*
|
|
* Copyright © 2014 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "i915_drv.h"
|
|
|
|
struct i915_params i915 __read_mostly = {
|
|
.modeset = -1,
|
|
.panel_ignore_lid = 1,
|
|
.semaphores = -1,
|
|
.lvds_channel_mode = 0,
|
|
.panel_use_ssc = -1,
|
|
.vbt_sdvo_panel_type = -1,
|
|
.enable_rc6 = -1,
|
|
.enable_fbc = -1,
|
|
.enable_execlists = -1,
|
|
.enable_hangcheck = true,
|
|
.enable_ppgtt = -1,
|
|
.enable_psr = 0,
|
|
.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
|
|
.disable_power_well = -1,
|
|
.enable_ips = 1,
|
|
.fastboot = 0,
|
|
.prefault_disable = 0,
|
|
.load_detect_test = 0,
|
|
.reset = true,
|
|
.invert_brightness = 0,
|
|
.disable_display = 0,
|
|
.enable_cmd_parser = 1,
|
|
.disable_vtd_wa = 0,
|
|
.use_mmio_flip = 0,
|
|
.mmio_debug = 0,
|
|
.verbose_state_checks = 1,
|
|
.nuclear_pageflip = 0,
|
|
.edp_vswing = 0,
|
|
.enable_guc_submission = false,
|
|
.guc_log_level = -1,
|
|
};
|
|
|
|
module_param_named(modeset, i915.modeset, int, 0400);
|
|
MODULE_PARM_DESC(modeset,
|
|
"Use kernel modesetting [KMS] (0=disable, "
|
|
"1=on, -1=force vga console preference [default])");
|
|
|
|
module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
|
|
MODULE_PARM_DESC(panel_ignore_lid,
|
|
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
|
|
"-1=force lid closed, -2=force lid open)");
|
|
|
|
module_param_named_unsafe(semaphores, i915.semaphores, int, 0400);
|
|
MODULE_PARM_DESC(semaphores,
|
|
"Use semaphores for inter-ring sync "
|
|
"(default: -1 (use per-chip defaults))");
|
|
|
|
module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400);
|
|
MODULE_PARM_DESC(enable_rc6,
|
|
"Enable power-saving render C-state 6. "
|
|
"Different stages can be selected via bitmask values "
|
|
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
|
|
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
|
|
"default: -1 (use per-chip default)");
|
|
|
|
module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);
|
|
MODULE_PARM_DESC(enable_fbc,
|
|
"Enable frame buffer compression for power savings "
|
|
"(default: -1 (use per-chip default))");
|
|
|
|
module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
|
|
MODULE_PARM_DESC(lvds_channel_mode,
|
|
"Specify LVDS channel mode "
|
|
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
|
|
|
|
module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
|
|
MODULE_PARM_DESC(lvds_use_ssc,
|
|
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
|
|
"(default: auto from VBT)");
|
|
|
|
module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
|
|
MODULE_PARM_DESC(vbt_sdvo_panel_type,
|
|
"Override/Ignore selection of SDVO panel mode in the VBT "
|
|
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
|
|
|
|
module_param_named_unsafe(reset, i915.reset, bool, 0600);
|
|
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
|
|
|
|
module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
|
|
MODULE_PARM_DESC(enable_hangcheck,
|
|
"Periodically check GPU activity for detecting hangs. "
|
|
"WARNING: Disabling this can cause system wide hangs. "
|
|
"(default: true)");
|
|
|
|
module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400);
|
|
MODULE_PARM_DESC(enable_ppgtt,
|
|
"Override PPGTT usage. "
|
|
"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
|
|
|
|
module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);
|
|
MODULE_PARM_DESC(enable_execlists,
|
|
"Override execlists usage. "
|
|
"(-1=auto [default], 0=disabled, 1=enabled)");
|
|
|
|
module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
|
|
MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
|
|
|
|
module_param_named_unsafe(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
|
|
MODULE_PARM_DESC(preliminary_hw_support,
|
|
"Enable preliminary hardware support.");
|
|
|
|
module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0600);
|
|
MODULE_PARM_DESC(disable_power_well,
|
|
"Disable display power wells when possible "
|
|
"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");
|
|
|
|
module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
|
|
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
|
|
|
|
module_param_named(fastboot, i915.fastboot, bool, 0600);
|
|
MODULE_PARM_DESC(fastboot,
|
|
"Try to skip unnecessary mode sets at boot time (default: false)");
|
|
|
|
module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
|
|
MODULE_PARM_DESC(prefault_disable,
|
|
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
|
|
"For developers only.");
|
|
|
|
module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600);
|
|
MODULE_PARM_DESC(load_detect_test,
|
|
"Force-enable the VGA load detect code for testing (default:false). "
|
|
"For developers only.");
|
|
|
|
module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);
|
|
MODULE_PARM_DESC(invert_brightness,
|
|
"Invert backlight brightness "
|
|
"(-1 force normal, 0 machine defaults, 1 force inversion), please "
|
|
"report PCI device ID, subsystem vendor and subsystem device ID "
|
|
"to dri-devel@lists.freedesktop.org, if your machine needs it. "
|
|
"It will then be included in an upcoming module version.");
|
|
|
|
module_param_named(disable_display, i915.disable_display, bool, 0600);
|
|
MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
|
|
|
|
module_param_named_unsafe(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
|
|
MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");
|
|
|
|
module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
|
|
MODULE_PARM_DESC(enable_cmd_parser,
|
|
"Enable command parsing (1=enabled [default], 0=disabled)");
|
|
|
|
module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
|
|
MODULE_PARM_DESC(use_mmio_flip,
|
|
"use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");
|
|
|
|
module_param_named(mmio_debug, i915.mmio_debug, int, 0600);
|
|
MODULE_PARM_DESC(mmio_debug,
|
|
"Enable the MMIO debug code for the first N failures (default: off). "
|
|
"This may negatively affect performance.");
|
|
|
|
module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);
|
|
MODULE_PARM_DESC(verbose_state_checks,
|
|
"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
|
|
|
|
module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0600);
|
|
MODULE_PARM_DESC(nuclear_pageflip,
|
|
"Force atomic modeset functionality; asynchronous mode is not yet supported. (default: false).");
|
|
|
|
/* WA to get away with the default setting in VBT for early platforms.Will be removed */
|
|
module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400);
|
|
MODULE_PARM_DESC(edp_vswing,
|
|
"Ignore/Override vswing pre-emph table selection from VBT "
|
|
"(0=use value from vbt [default], 1=low power swing(200mV),"
|
|
"2=default swing(400mV))");
|
|
|
|
module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, bool, 0400);
|
|
MODULE_PARM_DESC(enable_guc_submission, "Enable GuC submission (default:false)");
|
|
|
|
module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
|
|
MODULE_PARM_DESC(guc_log_level,
|
|
"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");
|