forked from Minki/linux
e947eccbeb
Retrieve the LVDS mode from the panel and configure the LVDS encoder accordingly. LVDS mode selection is static as LVDS panels can't be hot-plugged on any of the device supported by the driver. Support for dynamic mode selection can be implemented in the future when needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
269 lines
6.5 KiB
C
269 lines
6.5 KiB
C
/*
|
|
* rcar_du_lvdsenc.c -- R-Car Display Unit LVDS Encoder
|
|
*
|
|
* Copyright (C) 2013-2014 Renesas Electronics Corporation
|
|
*
|
|
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "rcar_du_drv.h"
|
|
#include "rcar_du_encoder.h"
|
|
#include "rcar_du_lvdsenc.h"
|
|
#include "rcar_lvds_regs.h"
|
|
|
|
struct rcar_du_lvdsenc {
|
|
struct rcar_du_device *dev;
|
|
|
|
unsigned int index;
|
|
void __iomem *mmio;
|
|
struct clk *clock;
|
|
bool enabled;
|
|
|
|
enum rcar_lvds_input input;
|
|
enum rcar_lvds_mode mode;
|
|
};
|
|
|
|
static void rcar_lvds_write(struct rcar_du_lvdsenc *lvds, u32 reg, u32 data)
|
|
{
|
|
iowrite32(data, lvds->mmio + reg);
|
|
}
|
|
|
|
static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds,
|
|
struct rcar_du_crtc *rcrtc)
|
|
{
|
|
const struct drm_display_mode *mode = &rcrtc->crtc.mode;
|
|
unsigned int freq = mode->clock;
|
|
u32 lvdcr0;
|
|
u32 pllcr;
|
|
|
|
/* PLL clock configuration */
|
|
if (freq < 39000)
|
|
pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
|
|
else if (freq < 61000)
|
|
pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
|
|
else if (freq < 121000)
|
|
pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
|
|
else
|
|
pllcr = LVDPLLCR_PLLDLYCNT_150M;
|
|
|
|
rcar_lvds_write(lvds, LVDPLLCR, pllcr);
|
|
|
|
/* Select the input, hardcode mode 0, enable LVDS operation and turn
|
|
* bias circuitry on.
|
|
*/
|
|
lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_BEN | LVDCR0_LVEN;
|
|
if (rcrtc->index == 2)
|
|
lvdcr0 |= LVDCR0_DUSEL;
|
|
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
|
|
|
|
/* Turn all the channels on. */
|
|
rcar_lvds_write(lvds, LVDCR1,
|
|
LVDCR1_CHSTBY_GEN2(3) | LVDCR1_CHSTBY_GEN2(2) |
|
|
LVDCR1_CHSTBY_GEN2(1) | LVDCR1_CHSTBY_GEN2(0) |
|
|
LVDCR1_CLKSTBY_GEN2);
|
|
|
|
/* Turn the PLL on, wait for the startup delay, and turn the output
|
|
* on.
|
|
*/
|
|
lvdcr0 |= LVDCR0_PLLON;
|
|
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
|
|
|
|
usleep_range(100, 150);
|
|
|
|
lvdcr0 |= LVDCR0_LVRES;
|
|
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
|
|
}
|
|
|
|
static void rcar_du_lvdsenc_start_gen3(struct rcar_du_lvdsenc *lvds,
|
|
struct rcar_du_crtc *rcrtc)
|
|
{
|
|
const struct drm_display_mode *mode = &rcrtc->crtc.mode;
|
|
unsigned int freq = mode->clock;
|
|
u32 lvdcr0;
|
|
u32 pllcr;
|
|
|
|
/* PLL clock configuration */
|
|
if (freq < 42000)
|
|
pllcr = LVDPLLCR_PLLDIVCNT_42M;
|
|
else if (freq < 85000)
|
|
pllcr = LVDPLLCR_PLLDIVCNT_85M;
|
|
else if (freq < 128000)
|
|
pllcr = LVDPLLCR_PLLDIVCNT_128M;
|
|
else
|
|
pllcr = LVDPLLCR_PLLDIVCNT_148M;
|
|
|
|
rcar_lvds_write(lvds, LVDPLLCR, pllcr);
|
|
|
|
/* Turn all the channels on. */
|
|
rcar_lvds_write(lvds, LVDCR1,
|
|
LVDCR1_CHSTBY_GEN3(3) | LVDCR1_CHSTBY_GEN3(2) |
|
|
LVDCR1_CHSTBY_GEN3(1) | LVDCR1_CHSTBY_GEN3(0) |
|
|
LVDCR1_CLKSTBY_GEN3);
|
|
|
|
/*
|
|
* Turn the PLL on, set it to LVDS normal mode, wait for the startup
|
|
* delay and turn the output on.
|
|
*/
|
|
lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_PLLON;
|
|
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
|
|
|
|
lvdcr0 |= LVDCR0_PWD;
|
|
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
|
|
|
|
usleep_range(100, 150);
|
|
|
|
lvdcr0 |= LVDCR0_LVRES;
|
|
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
|
|
}
|
|
|
|
static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds,
|
|
struct rcar_du_crtc *rcrtc)
|
|
{
|
|
u32 lvdhcr;
|
|
int ret;
|
|
|
|
if (lvds->enabled)
|
|
return 0;
|
|
|
|
ret = clk_prepare_enable(lvds->clock);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Hardcode the channels and control signals routing for now.
|
|
*
|
|
* HSYNC -> CTRL0
|
|
* VSYNC -> CTRL1
|
|
* DISP -> CTRL2
|
|
* 0 -> CTRL3
|
|
*/
|
|
rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
|
|
LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
|
|
LVDCTRCR_CTR0SEL_HSYNC);
|
|
|
|
if (rcar_du_needs(lvds->dev, RCAR_DU_QUIRK_LVDS_LANES))
|
|
lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
|
|
| LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
|
|
else
|
|
lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
|
|
| LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
|
|
|
|
rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
|
|
|
|
/* Perform generation-specific initialization. */
|
|
if (lvds->dev->info->gen < 3)
|
|
rcar_du_lvdsenc_start_gen2(lvds, rcrtc);
|
|
else
|
|
rcar_du_lvdsenc_start_gen3(lvds, rcrtc);
|
|
|
|
lvds->enabled = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rcar_du_lvdsenc_stop(struct rcar_du_lvdsenc *lvds)
|
|
{
|
|
if (!lvds->enabled)
|
|
return;
|
|
|
|
rcar_lvds_write(lvds, LVDCR0, 0);
|
|
rcar_lvds_write(lvds, LVDCR1, 0);
|
|
|
|
clk_disable_unprepare(lvds->clock);
|
|
|
|
lvds->enabled = false;
|
|
}
|
|
|
|
int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds, struct drm_crtc *crtc,
|
|
bool enable)
|
|
{
|
|
if (!enable) {
|
|
rcar_du_lvdsenc_stop(lvds);
|
|
return 0;
|
|
} else if (crtc) {
|
|
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
|
|
return rcar_du_lvdsenc_start(lvds, rcrtc);
|
|
} else
|
|
return -EINVAL;
|
|
}
|
|
|
|
void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct rcar_du_device *rcdu = lvds->dev;
|
|
|
|
/* The internal LVDS encoder has a restricted clock frequency operating
|
|
* range (30MHz to 150MHz on Gen2, 25.175MHz to 148.5MHz on Gen3). Clamp
|
|
* the clock accordingly.
|
|
*/
|
|
if (rcdu->info->gen < 3)
|
|
mode->clock = clamp(mode->clock, 30000, 150000);
|
|
else
|
|
mode->clock = clamp(mode->clock, 25175, 148500);
|
|
}
|
|
|
|
void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
|
|
enum rcar_lvds_mode mode)
|
|
{
|
|
lvds->mode = mode;
|
|
}
|
|
|
|
static int rcar_du_lvdsenc_get_resources(struct rcar_du_lvdsenc *lvds,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct resource *mem;
|
|
char name[7];
|
|
|
|
sprintf(name, "lvds.%u", lvds->index);
|
|
|
|
mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
|
|
lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(lvds->mmio))
|
|
return PTR_ERR(lvds->mmio);
|
|
|
|
lvds->clock = devm_clk_get(&pdev->dev, name);
|
|
if (IS_ERR(lvds->clock)) {
|
|
dev_err(&pdev->dev, "failed to get clock for %s\n", name);
|
|
return PTR_ERR(lvds->clock);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(rcdu->dev);
|
|
struct rcar_du_lvdsenc *lvds;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < rcdu->info->num_lvds; ++i) {
|
|
lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
|
|
if (lvds == NULL)
|
|
return -ENOMEM;
|
|
|
|
lvds->dev = rcdu;
|
|
lvds->index = i;
|
|
lvds->input = i ? RCAR_LVDS_INPUT_DU1 : RCAR_LVDS_INPUT_DU0;
|
|
lvds->enabled = false;
|
|
|
|
ret = rcar_du_lvdsenc_get_resources(lvds, pdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rcdu->lvds[i] = lvds;
|
|
}
|
|
|
|
return 0;
|
|
}
|