forked from Minki/linux
72849d4fce
STM32G0 provides an integrated USB Type-C and power delivery interface. It can be programmed with a firmware to handle UCSI protocol over I2C interface. A GPIO is used as an interrupt line. Type-C connector can be used as a wakeup source (typically to detect changes on the port, like attach or detach). PM suspend / resume routines are used to enable wake irqs, and signal a wakeup event in case the IRQ has fired while in suspend. The i2c core is doing the necessary initialization when the "wakeup-source" flag is provided. Note: the interrupt handler shouldn't be called before the i2c bus resumes. So, the interrupts are disabled during suspend period, and re-enabled upon resume, to avoid i2c transfer while suspended, from the irq handler. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220713120842.560902-3-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|---|---|---|
| .. | ||
| atm | ||
| c67x00 | ||
| cdns3 | ||
| chipidea | ||
| class | ||
| common | ||
| core | ||
| dwc2 | ||
| dwc3 | ||
| early | ||
| gadget | ||
| host | ||
| image | ||
| isp1760 | ||
| misc | ||
| mon | ||
| mtu3 | ||
| musb | ||
| phy | ||
| renesas_usbhs | ||
| roles | ||
| serial | ||
| storage | ||
| typec | ||
| usbip | ||
| Kconfig | ||
| Makefile | ||
| usb-skeleton.c | ||