forked from Minki/linux
716c74b007
Adding flush callback support in the driver. Two type of flush can be issued by mac80211: 1. drop = true: frame drop is ok, issue REPLY_TXFIFO_FLUSH host command to uCode to drop all the frames in tx fifo queues; then return the control back to mac80211 2. drop = false: wait for either all the frames in tx fifo queues been transmitted, or timeout; then return the control back to mac80211 If the flush request coming from mac80211, mac80211 will make sure there are no additional frames push down to driver before flush operation is completed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
306 lines
10 KiB
C
306 lines
10 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/wireless.h>
|
|
#include <net/mac80211.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "iwl-eeprom.h"
|
|
#include "iwl-dev.h"
|
|
#include "iwl-core.h"
|
|
#include "iwl-io.h"
|
|
#include "iwl-sta.h"
|
|
#include "iwl-agn.h"
|
|
#include "iwl-helpers.h"
|
|
#include "iwl-agn-hw.h"
|
|
#include "iwl-agn-led.h"
|
|
#include "iwl-agn-debugfs.h"
|
|
|
|
/* Highest firmware API version supported */
|
|
#define IWL1000_UCODE_API_MAX 3
|
|
|
|
/* Lowest firmware API version supported */
|
|
#define IWL1000_UCODE_API_MIN 1
|
|
|
|
#define IWL1000_FW_PRE "iwlwifi-1000-"
|
|
#define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
|
|
#define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
|
|
|
|
|
|
/*
|
|
* For 1000, use advance thermal throttling critical temperature threshold,
|
|
* but legacy thermal management implementation for now.
|
|
* This is for the reason of 1000 uCode using advance thermal throttling API
|
|
* but not implement ct_kill_exit based on ct_kill exit temperature
|
|
* so the thermal throttling will still based on legacy thermal throttling
|
|
* management.
|
|
* The code here need to be modified once 1000 uCode has the advanced thermal
|
|
* throttling algorithm in place
|
|
*/
|
|
static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
|
|
{
|
|
/* want Celsius */
|
|
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
|
|
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
|
|
}
|
|
|
|
/* NIC configuration for 1000 series */
|
|
static void iwl1000_nic_config(struct iwl_priv *priv)
|
|
{
|
|
/* set CSR_HW_CONFIG_REG for uCode use */
|
|
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
|
|
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
|
|
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
|
|
|
|
/* Setting digital SVR for 1000 card to 1.32V */
|
|
/* locking is acquired in iwl_set_bits_mask_prph() function */
|
|
iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
|
|
APMG_SVR_DIGITAL_VOLTAGE_1_32,
|
|
~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
|
|
}
|
|
|
|
static struct iwl_sensitivity_ranges iwl1000_sensitivity = {
|
|
.min_nrg_cck = 95,
|
|
.max_nrg_cck = 0, /* not used, set to 0 */
|
|
.auto_corr_min_ofdm = 90,
|
|
.auto_corr_min_ofdm_mrc = 170,
|
|
.auto_corr_min_ofdm_x1 = 120,
|
|
.auto_corr_min_ofdm_mrc_x1 = 240,
|
|
|
|
.auto_corr_max_ofdm = 120,
|
|
.auto_corr_max_ofdm_mrc = 210,
|
|
.auto_corr_max_ofdm_x1 = 155,
|
|
.auto_corr_max_ofdm_mrc_x1 = 290,
|
|
|
|
.auto_corr_min_cck = 125,
|
|
.auto_corr_max_cck = 200,
|
|
.auto_corr_min_cck_mrc = 170,
|
|
.auto_corr_max_cck_mrc = 400,
|
|
.nrg_th_cck = 95,
|
|
.nrg_th_ofdm = 95,
|
|
|
|
.barker_corr_th_min = 190,
|
|
.barker_corr_th_min_mrc = 390,
|
|
.nrg_th_cca = 62,
|
|
};
|
|
|
|
static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
|
|
{
|
|
if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
|
|
priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
|
|
priv->cfg->num_of_queues =
|
|
priv->cfg->mod_params->num_of_queues;
|
|
|
|
priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
|
|
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
|
|
priv->hw_params.scd_bc_tbls_size =
|
|
priv->cfg->num_of_queues *
|
|
sizeof(struct iwlagn_scd_bc_tbl);
|
|
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
|
|
priv->hw_params.max_stations = IWL5000_STATION_COUNT;
|
|
priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
|
|
|
|
priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE;
|
|
priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE;
|
|
|
|
priv->hw_params.max_bsm_size = 0;
|
|
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
|
|
BIT(IEEE80211_BAND_5GHZ);
|
|
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
|
|
|
|
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
|
|
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
|
|
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
|
|
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
|
|
|
|
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
|
|
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
|
|
|
|
/* Set initial sensitivity parameters */
|
|
/* Set initial calibration set */
|
|
priv->hw_params.sens = &iwl1000_sensitivity;
|
|
priv->hw_params.calib_init_cfg =
|
|
BIT(IWL_CALIB_XTAL) |
|
|
BIT(IWL_CALIB_LO) |
|
|
BIT(IWL_CALIB_TX_IQ) |
|
|
BIT(IWL_CALIB_TX_IQ_PERD) |
|
|
BIT(IWL_CALIB_BASE_BAND);
|
|
if (priv->cfg->need_dc_calib)
|
|
priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC);
|
|
|
|
priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct iwl_lib_ops iwl1000_lib = {
|
|
.set_hw_params = iwl1000_hw_set_hw_params,
|
|
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
|
|
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
|
|
.txq_set_sched = iwlagn_txq_set_sched,
|
|
.txq_agg_enable = iwlagn_txq_agg_enable,
|
|
.txq_agg_disable = iwlagn_txq_agg_disable,
|
|
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
|
|
.txq_free_tfd = iwl_hw_txq_free_tfd,
|
|
.txq_init = iwl_hw_tx_queue_init,
|
|
.rx_handler_setup = iwlagn_rx_handler_setup,
|
|
.setup_deferred_work = iwlagn_setup_deferred_work,
|
|
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
|
|
.load_ucode = iwlagn_load_ucode,
|
|
.dump_nic_event_log = iwl_dump_nic_event_log,
|
|
.dump_nic_error_log = iwl_dump_nic_error_log,
|
|
.dump_csr = iwl_dump_csr,
|
|
.dump_fh = iwl_dump_fh,
|
|
.init_alive_start = iwlagn_init_alive_start,
|
|
.alive_notify = iwlagn_alive_notify,
|
|
.send_tx_power = iwlagn_send_tx_power,
|
|
.update_chain_flags = iwl_update_chain_flags,
|
|
.apm_ops = {
|
|
.init = iwl_apm_init,
|
|
.stop = iwl_apm_stop,
|
|
.config = iwl1000_nic_config,
|
|
.set_pwr_src = iwl_set_pwr_src,
|
|
},
|
|
.eeprom_ops = {
|
|
.regulatory_bands = {
|
|
EEPROM_REG_BAND_1_CHANNELS,
|
|
EEPROM_REG_BAND_2_CHANNELS,
|
|
EEPROM_REG_BAND_3_CHANNELS,
|
|
EEPROM_REG_BAND_4_CHANNELS,
|
|
EEPROM_REG_BAND_5_CHANNELS,
|
|
EEPROM_REG_BAND_24_HT40_CHANNELS,
|
|
EEPROM_REG_BAND_52_HT40_CHANNELS
|
|
},
|
|
.verify_signature = iwlcore_eeprom_verify_signature,
|
|
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
|
|
.release_semaphore = iwlcore_eeprom_release_semaphore,
|
|
.calib_version = iwlagn_eeprom_calib_version,
|
|
.query_addr = iwlagn_eeprom_query_addr,
|
|
},
|
|
.post_associate = iwl_post_associate,
|
|
.isr = iwl_isr_ict,
|
|
.config_ap = iwl_config_ap,
|
|
.temp_ops = {
|
|
.temperature = iwlagn_temperature,
|
|
.set_ct_kill = iwl1000_set_ct_threshold,
|
|
},
|
|
.manage_ibss_station = iwlagn_manage_ibss_station,
|
|
.update_bcast_station = iwl_update_bcast_station,
|
|
.debugfs_ops = {
|
|
.rx_stats_read = iwl_ucode_rx_stats_read,
|
|
.tx_stats_read = iwl_ucode_tx_stats_read,
|
|
.general_stats_read = iwl_ucode_general_stats_read,
|
|
},
|
|
.recover_from_tx_stall = iwl_bg_monitor_recover,
|
|
.check_plcp_health = iwl_good_plcp_health,
|
|
.check_ack_health = iwl_good_ack_health,
|
|
.txfifo_flush = iwlagn_txfifo_flush,
|
|
};
|
|
|
|
static const struct iwl_ops iwl1000_ops = {
|
|
.lib = &iwl1000_lib,
|
|
.hcmd = &iwlagn_hcmd,
|
|
.utils = &iwlagn_hcmd_utils,
|
|
.led = &iwlagn_led_ops,
|
|
};
|
|
|
|
struct iwl_cfg iwl1000_bgn_cfg = {
|
|
.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
|
|
.fw_name_pre = IWL1000_FW_PRE,
|
|
.ucode_api_max = IWL1000_UCODE_API_MAX,
|
|
.ucode_api_min = IWL1000_UCODE_API_MIN,
|
|
.sku = IWL_SKU_G|IWL_SKU_N,
|
|
.ops = &iwl1000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_A,
|
|
.valid_rx_ant = ANT_AB,
|
|
.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
|
|
.shadow_ram_support = false,
|
|
.ht_greenfield_support = true,
|
|
.led_compensation = 51,
|
|
.use_rts_for_ht = true, /* use rts/cts protection */
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1000,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 128,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
struct iwl_cfg iwl1000_bg_cfg = {
|
|
.name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
|
|
.fw_name_pre = IWL1000_FW_PRE,
|
|
.ucode_api_max = IWL1000_UCODE_API_MAX,
|
|
.ucode_api_min = IWL1000_UCODE_API_MIN,
|
|
.sku = IWL_SKU_G,
|
|
.ops = &iwl1000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_A,
|
|
.valid_rx_ant = ANT_AB,
|
|
.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
|
|
.shadow_ram_support = false,
|
|
.led_compensation = 51,
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1000,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 128,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
|