linux/arch/x86/boot/tty.c
Yinghai Lu 70b0d22d58 x86, setup: Only set early_serial_base after port is initialized
putchar is using early_serial_base to check if port is initialized.

So we only assign it after early_serial_init() is called,
in case we need use VGA to debug early serial console.

Also add display for port addr and baud.

-v2: update to current tip

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C3E0171.6050008@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-14 12:07:16 -07:00

274 lines
5.3 KiB
C

/* -*- linux-c -*- ------------------------------------------------------- *
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
* Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
*
* ----------------------------------------------------------------------- */
/*
* Very simple screen and serial I/O
*/
#include "boot.h"
#define DEFAULT_SERIAL_PORT 0x3f8 /* ttyS0 */
static int early_serial_base;
#define XMTRDY 0x20
#define DLAB 0x80
#define TXR 0 /* Transmit register (WRITE) */
#define RXR 0 /* Receive register (READ) */
#define IER 1 /* Interrupt Enable */
#define IIR 2 /* Interrupt ID */
#define FCR 2 /* FIFO control */
#define LCR 3 /* Line control */
#define MCR 4 /* Modem control */
#define LSR 5 /* Line Status */
#define MSR 6 /* Modem Status */
#define DLL 0 /* Divisor Latch Low */
#define DLH 1 /* Divisor latch High */
#define DEFAULT_BAUD 9600
/*
* These functions are in .inittext so they can be used to signal
* error during initialization.
*/
static void __attribute__((section(".inittext"))) serial_putchar(int ch)
{
unsigned timeout = 0xffff;
while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
outb(ch, early_serial_base + TXR);
}
static void __attribute__((section(".inittext"))) bios_putchar(int ch)
{
struct biosregs ireg;
initregs(&ireg);
ireg.bx = 0x0007;
ireg.cx = 0x0001;
ireg.ah = 0x0e;
ireg.al = ch;
intcall(0x10, &ireg, NULL);
}
void __attribute__((section(".inittext"))) putchar(int ch)
{
if (ch == '\n')
putchar('\r'); /* \n -> \r\n */
bios_putchar(ch);
if (early_serial_base != 0)
serial_putchar(ch);
}
void __attribute__((section(".inittext"))) puts(const char *str)
{
while (*str)
putchar(*str++);
}
/*
* Read the CMOS clock through the BIOS, and return the
* seconds in BCD.
*/
static u8 gettime(void)
{
struct biosregs ireg, oreg;
initregs(&ireg);
ireg.ah = 0x02;
intcall(0x1a, &ireg, &oreg);
return oreg.dh;
}
/*
* Read from the keyboard
*/
int getchar(void)
{
struct biosregs ireg, oreg;
initregs(&ireg);
/* ireg.ah = 0x00; */
intcall(0x16, &ireg, &oreg);
return oreg.al;
}
static int kbd_pending(void)
{
struct biosregs ireg, oreg;
initregs(&ireg);
ireg.ah = 0x01;
intcall(0x16, &ireg, &oreg);
return !(oreg.eflags & X86_EFLAGS_ZF);
}
void kbd_flush(void)
{
for (;;) {
if (!kbd_pending())
break;
getchar();
}
}
int getchar_timeout(void)
{
int cnt = 30;
int t0, t1;
t0 = gettime();
while (cnt) {
if (kbd_pending())
return getchar();
t1 = gettime();
if (t0 != t1) {
cnt--;
t0 = t1;
}
}
return 0; /* Timeout! */
}
static void early_serial_init(int port, int baud)
{
unsigned char c;
unsigned divisor;
outb(0x3, port + LCR); /* 8n1 */
outb(0, port + IER); /* no interrupt */
outb(0, port + FCR); /* no fifo */
outb(0x3, port + MCR); /* DTR + RTS */
divisor = 115200 / baud;
c = inb(port + LCR);
outb(c | DLAB, port + LCR);
outb(divisor & 0xff, port + DLL);
outb((divisor >> 8) & 0xff, port + DLH);
outb(c & ~DLAB, port + LCR);
early_serial_base = port;
printf("Early serial console at I/O port 0x%x baud: %d\n", port, baud);
}
static void parse_earlyprintk(void)
{
int baud = DEFAULT_BAUD;
char arg[32];
int pos = 0;
int port = 0;
if (cmdline_find_option("earlyprintk", arg, sizeof arg) > 0) {
char *e;
if (!strncmp(arg, "serial", 6)) {
port = DEFAULT_SERIAL_PORT;
pos += 6;
}
if (arg[pos] == ',')
pos++;
if (!strncmp(arg, "ttyS", 4)) {
static const int bases[] = { 0x3f8, 0x2f8 };
int idx = 0;
if (!strncmp(arg + pos, "ttyS", 4))
pos += 4;
if (arg[pos++] == '1')
idx = 1;
port = bases[idx];
}
if (arg[pos] == ',')
pos++;
baud = simple_strtoull(arg + pos, &e, 0);
if (baud == 0 || arg + pos == e)
baud = DEFAULT_BAUD;
}
if (port)
early_serial_init(port, baud);
}
#define BASE_BAUD (1843200/16)
static unsigned int probe_baud(int port)
{
unsigned char lcr, dll, dlh;
unsigned int quot;
lcr = inb(port + LCR);
outb(lcr | DLAB, port + LCR);
dll = inb(port + DLL);
dlh = inb(port + DLH);
outb(lcr, port + LCR);
quot = (dlh << 8) | dll;
return BASE_BAUD / quot;
}
static void parse_console_uart8250(void)
{
char optstr[64], *options;
int baud = DEFAULT_BAUD;
int port = 0;
/*
* console=uart8250,io,0x3f8,115200n8
* need to make sure it is last one console !
*/
if (cmdline_find_option("console", optstr, sizeof optstr) <= 0)
return;
options = optstr;
if (!strncmp(options, "uart8250,io,", 12))
port = simple_strtoull(options + 12, &options, 0);
else if (!strncmp(options, "uart,io,", 8))
port = simple_strtoull(options + 8, &options, 0);
else
return;
if (options && (options[0] == ','))
baud = simple_strtoull(options + 1, &options, 0);
else
baud = probe_baud(port);
if (port)
early_serial_init(port, baud);
}
void console_init(void)
{
parse_earlyprintk();
if (!early_serial_base)
parse_console_uart8250();
}