forked from Minki/linux
7a76aad026
Pull "i.MX device tree updates for 4.17" from Shawn Guo: - New board support: phyBOARD-Mira i.MX6 boards; Advantech DMS-BA16 i.MX6Q board; Toradex Colibri iMX6ULL boards. - ZII RDU board updates: add RAVE SP device; disable on-chip watchdog as the external watchdog is being used instead; improve USDHC node regarding to voltage and SDIO capability. - i.MX6UL/ULL updates: cpufreq clock cleanup; add IOMUXC_SNVS pins and missing daisy chain configurations; add more devices like WDOG3, UART8, PMU, architected timer etc. - Hummingboard updates: correct USBOTG-ID pin; remove mention of nonexistent node. - Fix compatibles of atmel eeprom devices. - A couple of improvements on i.MX25 pinfunc header regarding to eSDHC pins. - A bunch of patches from Fabio and Marco to fix DTC warnings seen with W=1 switch. - Remove GPU subsystem nodes, as they are not needed by the etnaviv driver anymore and have been removed from the binding. - Add FIFO depth definition for i.MX25 SSI devices. - Add missing '#sound-dai-cells' for sgtl5000 codec which is complained by DTC. - Miscellaneous and random updates. * tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (66 commits) ARM: dts: i.MX25: define SSI FIFO depth ARM: dts: vf610m4: Remove the zero length reg property ARM: dts: vf610m4: Remove skeleton.dtsi inclusion ARM: dts: vf500: Remove the zero length reg property ARM: dts: vf: Add memory node unit name ARM: dts: vf500: Remove skeleton.dtsi inclusion ARM: dts: imx7s: add temperature monitor support ARM: dts: imx: Add missing #sound-dai-cells for sgtl5000 codec ARM: dts: imx51-zii-rdu1: Add node for RAVE SP device ARM: dts: imx6: RDU2: Add RAVE SP device ARM: dts: imx5: Pass the memory unit-address ARM: dts: imx7s: add spba-bus abstraction ARM: dts: imx6dl-icore-rqs: Fix invalid PHY address assignment for ethernet ARM: dts: imx6ul: add wdog3 node ARM: dts: imx7: add CPU PMU support ARM: dts: imx6dl-colibri-eval-v3: Add chosen node ARM: dts: imx6: Pass memory unit-adress ARM: dts: imx6dl: remove 'lcdif' node ARM: dts: hummingboard: Remove mention of nonexistent node ARM: dts: imx6qdl-hummingboard: fix USBOTG-ID pin ...
1139 lines
31 KiB
Plaintext
1139 lines
31 KiB
Plaintext
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
* Copyright 2016 Toradex AG
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx7d-clock.h>
|
|
#include <dt-bindings/power/imx7-power.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include "imx7d-pinfunc.h"
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* The decompressor and also some bootloaders rely on a
|
|
* pre-existing /chosen node to be available to insert the
|
|
* command line and merge other ATAGS info.
|
|
* Also for U-Boot there must be a pre-existing /memory node.
|
|
*/
|
|
chosen {};
|
|
memory { device_type = "memory"; };
|
|
|
|
aliases {
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
gpio5 = &gpio6;
|
|
gpio6 = &gpio7;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
i2c3 = &i2c4;
|
|
mmc0 = &usdhc1;
|
|
mmc1 = &usdhc2;
|
|
mmc2 = &usdhc3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
serial5 = &uart6;
|
|
serial6 = &uart7;
|
|
spi0 = &ecspi1;
|
|
spi1 = &ecspi2;
|
|
spi2 = &ecspi3;
|
|
spi3 = &ecspi4;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
clock-frequency = <792000000>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clks IMX7D_CLK_ARM>;
|
|
};
|
|
};
|
|
|
|
ckil: clock-cki {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "ckil";
|
|
};
|
|
|
|
osc: clock-osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc";
|
|
};
|
|
|
|
usbphynop1: usbphynop1 {
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&clks IMX7D_USB_PHY1_CLK>;
|
|
clock-names = "main_clk";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usbphynop3: usbphynop3 {
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
|
|
clock-names = "main_clk";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupt-parent = <&gpc>;
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>;
|
|
};
|
|
|
|
replicator {
|
|
/*
|
|
* non-configurable replicators don't show up on the
|
|
* AMBA bus. As such no need to add "arm,primecell"
|
|
*/
|
|
compatible = "arm,coresight-replicator";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* replicator output ports */
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out_port0: endpoint {
|
|
remote-endpoint = <&tpiu_in_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out_port1: endpoint {
|
|
remote-endpoint = <&etr_in_port>;
|
|
};
|
|
};
|
|
|
|
/* replicator input port */
|
|
port@2 {
|
|
reg = <0>;
|
|
replicator_in_port0: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etf_out_port>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gpc>;
|
|
ranges;
|
|
|
|
funnel@30041000 {
|
|
compatible = "arm,coresight-funnel", "arm,primecell";
|
|
reg = <0x30041000 0x1000>;
|
|
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
ca_funnel_ports: ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* funnel input ports */
|
|
port@0 {
|
|
reg = <0>;
|
|
ca_funnel_in_port0: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm0_out_port>;
|
|
};
|
|
};
|
|
|
|
/* funnel output port */
|
|
port@2 {
|
|
reg = <0>;
|
|
ca_funnel_out_port0: endpoint {
|
|
remote-endpoint = <&hugo_funnel_in_port0>;
|
|
};
|
|
};
|
|
|
|
/* the other input ports are not connect to anything */
|
|
};
|
|
};
|
|
|
|
etm@3007c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0x3007c000 0x1000>;
|
|
cpu = <&cpu0>;
|
|
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
port {
|
|
etm0_out_port: endpoint {
|
|
remote-endpoint = <&ca_funnel_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@30083000 {
|
|
compatible = "arm,coresight-funnel", "arm,primecell";
|
|
reg = <0x30083000 0x1000>;
|
|
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* funnel input ports */
|
|
port@0 {
|
|
reg = <0>;
|
|
hugo_funnel_in_port0: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&ca_funnel_out_port0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
hugo_funnel_in_port1: endpoint {
|
|
slave-mode; /* M4 input */
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <0>;
|
|
hugo_funnel_out_port0: endpoint {
|
|
remote-endpoint = <&etf_in_port>;
|
|
};
|
|
};
|
|
|
|
/* the other input ports are not connect to anything */
|
|
};
|
|
};
|
|
|
|
etf@30084000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0x30084000 0x1000>;
|
|
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
etf_in_port: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&hugo_funnel_out_port0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <0>;
|
|
etf_out_port: endpoint {
|
|
remote-endpoint = <&replicator_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etr@30086000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0x30086000 0x1000>;
|
|
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
port {
|
|
etr_in_port: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&replicator_out_port1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@30087000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0x30087000 0x1000>;
|
|
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
port {
|
|
tpiu_in_port: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&replicator_out_port1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@31001000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
interrupt-parent = <&intc>;
|
|
reg = <0x31001000 0x1000>,
|
|
<0x31002000 0x2000>,
|
|
<0x31004000 0x2000>,
|
|
<0x31006000 0x2000>;
|
|
};
|
|
|
|
aips1: aips-bus@30000000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30000000 0x400000>;
|
|
ranges;
|
|
|
|
gpio1: gpio@30200000 {
|
|
compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30200000 0x10000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
|
|
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
|
|
};
|
|
|
|
gpio2: gpio@30210000 {
|
|
compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30210000 0x10000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 13 32>;
|
|
};
|
|
|
|
gpio3: gpio@30220000 {
|
|
compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30220000 0x10000>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 45 29>;
|
|
};
|
|
|
|
gpio4: gpio@30230000 {
|
|
compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30230000 0x10000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 74 24>;
|
|
};
|
|
|
|
gpio5: gpio@30240000 {
|
|
compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30240000 0x10000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 98 18>;
|
|
};
|
|
|
|
gpio6: gpio@30250000 {
|
|
compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30250000 0x10000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 116 23>;
|
|
};
|
|
|
|
gpio7: gpio@30260000 {
|
|
compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30260000 0x10000>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 139 16>;
|
|
};
|
|
|
|
wdog1: wdog@30280000 {
|
|
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
|
|
reg = <0x30280000 0x10000>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
|
|
};
|
|
|
|
wdog2: wdog@30290000 {
|
|
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
|
|
reg = <0x30290000 0x10000>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog3: wdog@302a0000 {
|
|
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
|
|
reg = <0x302a0000 0x10000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog4: wdog@302b0000 {
|
|
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
|
|
reg = <0x302b0000 0x10000>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc_lpsr: iomuxc-lpsr@302c0000 {
|
|
compatible = "fsl,imx7d-iomuxc-lpsr";
|
|
reg = <0x302c0000 0x10000>;
|
|
fsl,input-sel = <&iomuxc>;
|
|
};
|
|
|
|
gpt1: gpt@302d0000 {
|
|
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
|
|
reg = <0x302d0000 0x10000>;
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_GPT1_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpt2: gpt@302e0000 {
|
|
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
|
|
reg = <0x302e0000 0x10000>;
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_GPT2_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt3: gpt@302f0000 {
|
|
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
|
|
reg = <0x302f0000 0x10000>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_GPT3_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt4: gpt@30300000 {
|
|
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
|
|
reg = <0x30300000 0x10000>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_GPT4_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
kpp: kpp@30320000 {
|
|
compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
|
|
reg = <0x30320000 0x10000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_KPP_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc: iomuxc@30330000 {
|
|
compatible = "fsl,imx7d-iomuxc";
|
|
reg = <0x30330000 0x10000>;
|
|
};
|
|
|
|
gpr: iomuxc-gpr@30340000 {
|
|
compatible = "fsl,imx7d-iomuxc-gpr",
|
|
"fsl,imx6q-iomuxc-gpr", "syscon";
|
|
reg = <0x30340000 0x10000>;
|
|
};
|
|
|
|
ocotp: ocotp-ctrl@30350000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,imx7d-ocotp", "syscon";
|
|
reg = <0x30350000 0x10000>;
|
|
clocks = <&clks IMX7D_OCOTP_CLK>;
|
|
|
|
tempmon_calib: calib@3c {
|
|
reg = <0x3c 0x4>;
|
|
};
|
|
|
|
tempmon_temp_grade: temp-grade@10 {
|
|
reg = <0x10 0x4>;
|
|
};
|
|
};
|
|
|
|
tempmon: tempmon {
|
|
compatible = "fsl,imx7d-tempmon";
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,tempmon =<&anatop>;
|
|
nvmem-cells = <&tempmon_calib>,
|
|
<&tempmon_temp_grade>;
|
|
nvmem-cell-names = "calib", "temp_grade";
|
|
clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
|
|
};
|
|
|
|
anatop: anatop@30360000 {
|
|
compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
|
|
"syscon", "simple-bus";
|
|
reg = <0x30360000 0x10000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_1p0d: regulator-vdd1p0d@30360210 {
|
|
reg = <0x30360210>;
|
|
compatible = "fsl,anatop-regulator";
|
|
regulator-name = "vdd1p0d";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
anatop-reg-offset = <0x210>;
|
|
anatop-vol-bit-shift = <8>;
|
|
anatop-vol-bit-width = <5>;
|
|
anatop-min-bit-val = <8>;
|
|
anatop-min-voltage = <800000>;
|
|
anatop-max-voltage = <1200000>;
|
|
anatop-enable-bit = <0>;
|
|
};
|
|
};
|
|
|
|
snvs: snvs@30370000 {
|
|
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
|
|
reg = <0x30370000 0x10000>;
|
|
|
|
snvs_rtc: snvs-rtc-lp {
|
|
compatible = "fsl,sec-v4.0-mon-rtc-lp";
|
|
regmap = <&snvs>;
|
|
offset = <0x34>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_SNVS_CLK>;
|
|
clock-names = "snvs-rtc";
|
|
};
|
|
|
|
snvs_poweroff: snvs-poweroff {
|
|
compatible = "syscon-poweroff";
|
|
regmap = <&snvs>;
|
|
offset = <0x38>;
|
|
value = <0x60>;
|
|
mask = <0x60>;
|
|
};
|
|
|
|
snvs_pwrkey: snvs-powerkey {
|
|
compatible = "fsl,sec-v4.0-pwrkey";
|
|
regmap = <&snvs>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
linux,keycode = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
clks: ccm@30380000 {
|
|
compatible = "fsl,imx7d-ccm";
|
|
reg = <0x30380000 0x10000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
#clock-cells = <1>;
|
|
clocks = <&ckil>, <&osc>;
|
|
clock-names = "ckil", "osc";
|
|
};
|
|
|
|
src: src@30390000 {
|
|
compatible = "fsl,imx7d-src", "syscon";
|
|
reg = <0x30390000 0x10000>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gpc: gpc@303a0000 {
|
|
compatible = "fsl,imx7d-gpc";
|
|
reg = <0x303a0000 0x10000>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&intc>;
|
|
#power-domain-cells = <1>;
|
|
|
|
pgc {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pgc_pcie_phy: pgc-power-domain@1 {
|
|
#power-domain-cells = <0>;
|
|
reg = <1>;
|
|
power-supply = <®_1p0d>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
aips2: aips-bus@30400000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30400000 0x400000>;
|
|
ranges;
|
|
|
|
adc1: adc@30610000 {
|
|
compatible = "fsl,imx7d-adc";
|
|
reg = <0x30610000 0x10000>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
|
|
clock-names = "adc";
|
|
status = "disabled";
|
|
};
|
|
|
|
adc2: adc@30620000 {
|
|
compatible = "fsl,imx7d-adc";
|
|
reg = <0x30620000 0x10000>;
|
|
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
|
|
clock-names = "adc";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi4: ecspi@30630000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30630000 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
|
|
<&clks IMX7D_ECSPI4_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@30660000 {
|
|
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30660000 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
|
|
<&clks IMX7D_PWM1_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@30670000 {
|
|
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30670000 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
|
|
<&clks IMX7D_PWM2_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@30680000 {
|
|
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30680000 0x10000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
|
|
<&clks IMX7D_PWM3_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm4: pwm@30690000 {
|
|
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30690000 0x10000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
|
|
<&clks IMX7D_PWM4_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lcdif: lcdif@30730000 {
|
|
compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
|
|
reg = <0x30730000 0x10000>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
|
|
<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
|
|
clock-names = "pix", "axi";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
aips3: aips-bus@30800000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30800000 0x400000>;
|
|
ranges;
|
|
|
|
spba-bus@30800000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30800000 0x100000>;
|
|
ranges;
|
|
|
|
ecspi1: ecspi@30820000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30820000 0x10000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
|
|
<&clks IMX7D_ECSPI1_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi2: ecspi@30830000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30830000 0x10000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
|
|
<&clks IMX7D_ECSPI2_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi3: ecspi@30840000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30840000 0x10000>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
|
|
<&clks IMX7D_ECSPI3_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@30860000 {
|
|
compatible = "fsl,imx7d-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30860000 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_UART1_ROOT_CLK>,
|
|
<&clks IMX7D_UART1_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@30890000 {
|
|
compatible = "fsl,imx7d-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30890000 0x10000>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_UART2_ROOT_CLK>,
|
|
<&clks IMX7D_UART2_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@30880000 {
|
|
compatible = "fsl,imx7d-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30880000 0x10000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_UART3_ROOT_CLK>,
|
|
<&clks IMX7D_UART3_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai1: sai@308a0000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
|
|
reg = <0x308a0000 0x10000>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_SAI1_IPG_CLK>,
|
|
<&clks IMX7D_SAI1_ROOT_CLK>,
|
|
<&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "rx", "tx";
|
|
dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2: sai@308b0000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
|
|
reg = <0x308b0000 0x10000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_SAI2_IPG_CLK>,
|
|
<&clks IMX7D_SAI2_ROOT_CLK>,
|
|
<&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "rx", "tx";
|
|
dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai3: sai@308c0000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
|
|
reg = <0x308c0000 0x10000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_SAI3_IPG_CLK>,
|
|
<&clks IMX7D_SAI3_ROOT_CLK>,
|
|
<&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "rx", "tx";
|
|
dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
crypto: caam@30900000 {
|
|
compatible = "fsl,sec-v4.0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30900000 0x40000>;
|
|
ranges = <0 0x30900000 0x40000>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_CAAM_CLK>,
|
|
<&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
|
|
clock-names = "ipg", "aclk";
|
|
|
|
sec_jr0: jr0@1000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr1: jr1@2000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x2000 0x1000>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr2: jr1@3000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x3000 0x1000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
flexcan1: can@30a00000 {
|
|
compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
|
|
reg = <0x30a00000 0x10000>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_CAN1_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
flexcan2: can@30a10000 {
|
|
compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
|
|
reg = <0x30a10000 0x10000>;
|
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_CLK_DUMMY>,
|
|
<&clks IMX7D_CAN2_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@30a20000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a20000 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@30a30000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a30000 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@30a40000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a40000 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@30a50000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a50000 0x10000>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@30a60000 {
|
|
compatible = "fsl,imx7d-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30a60000 0x10000>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_UART4_ROOT_CLK>,
|
|
<&clks IMX7D_UART4_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@30a70000 {
|
|
compatible = "fsl,imx7d-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30a70000 0x10000>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_UART5_ROOT_CLK>,
|
|
<&clks IMX7D_UART5_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@30a80000 {
|
|
compatible = "fsl,imx7d-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30a80000 0x10000>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_UART6_ROOT_CLK>,
|
|
<&clks IMX7D_UART6_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart7: serial@30a90000 {
|
|
compatible = "fsl,imx7d-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30a90000 0x10000>;
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_UART7_ROOT_CLK>,
|
|
<&clks IMX7D_UART7_ROOT_CLK>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbotg1: usb@30b10000 {
|
|
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
|
|
reg = <0x30b10000 0x200>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_USB_CTRL_CLK>;
|
|
fsl,usbphy = <&usbphynop1>;
|
|
fsl,usbmisc = <&usbmisc1 0>;
|
|
phy-clkgate-delay-us = <400>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb@30b30000 {
|
|
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
|
|
reg = <0x30b30000 0x200>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_USB_CTRL_CLK>;
|
|
fsl,usbphy = <&usbphynop3>;
|
|
fsl,usbmisc = <&usbmisc3 0>;
|
|
phy_type = "hsic";
|
|
dr_mode = "host";
|
|
phy-clkgate-delay-us = <400>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc1: usbmisc@30b10200 {
|
|
#index-cells = <1>;
|
|
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
|
|
reg = <0x30b10200 0x200>;
|
|
};
|
|
|
|
usbmisc3: usbmisc@30b30200 {
|
|
#index-cells = <1>;
|
|
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
|
|
reg = <0x30b30200 0x200>;
|
|
};
|
|
|
|
usdhc1: usdhc@30b40000 {
|
|
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
|
|
reg = <0x30b40000 0x10000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
|
|
<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
|
|
<&clks IMX7D_USDHC1_ROOT_CLK>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc2: usdhc@30b50000 {
|
|
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
|
|
reg = <0x30b50000 0x10000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
|
|
<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
|
|
<&clks IMX7D_USDHC2_ROOT_CLK>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc3: usdhc@30b60000 {
|
|
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
|
|
reg = <0x30b60000 0x10000>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
|
|
<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
|
|
<&clks IMX7D_USDHC3_ROOT_CLK>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma: sdma@30bd0000 {
|
|
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
|
|
reg = <0x30bd0000 0x10000>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_SDMA_CORE_CLK>,
|
|
<&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
|
|
};
|
|
|
|
fec1: ethernet@30be0000 {
|
|
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
|
|
reg = <0x30be0000 0x10000>;
|
|
interrupt-names = "int0", "int1", "int2", "pps";
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
|
|
<&clks IMX7D_ENET_AXI_ROOT_CLK>,
|
|
<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
|
|
<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
|
|
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
|
|
clock-names = "ipg", "ahb", "ptp",
|
|
"enet_clk_ref", "enet_out";
|
|
fsl,num-tx-queues=<3>;
|
|
fsl,num-rx-queues=<3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dma_apbh: dma-apbh@33000000 {
|
|
compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
|
|
reg = <0x33000000 0x2000>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
|
|
#dma-cells = <1>;
|
|
dma-channels = <4>;
|
|
clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
|
|
};
|
|
|
|
gpmi: gpmi-nand@33002000{
|
|
compatible = "fsl,imx7d-gpmi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
|
|
reg-names = "gpmi-nand", "bch";
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "bch";
|
|
clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
|
|
<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
|
|
clock-names = "gpmi_io", "gpmi_bch_apb";
|
|
dmas = <&dma_apbh 0>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
|
|
};
|
|
};
|
|
};
|