forked from Minki/linux
6a806a214a
Setting the Same Edge bit indicates to the spfi block to receive and
transmit data on the same edge of the spfi clock, which in turn
doubles the operating frequency of spfi.
The maximum supported frequency is limited to 1/4th of the spfi input
clock, but without this bit set the maximum would be 1/8th of the
input clock.
The current driver calculates the divisor with maximum speed at 1/4th
of the input clock, this would fail if the requested frequency is
higher than 1/8 of the input clock. Any requests for 1/8th of the
input clock would still pass.
Fixes: 8543d0e72d
("spi: img-spfi: Limit bit clock to 1/4th of input clock")
Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
762 lines
19 KiB
C
762 lines
19 KiB
C
/*
|
|
* IMG SPFI controller driver
|
|
*
|
|
* Copyright (C) 2007,2008,2013 Imagination Technologies Ltd.
|
|
* Copyright (C) 2014 Google, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define SPFI_DEVICE_PARAMETER(x) (0x00 + 0x4 * (x))
|
|
#define SPFI_DEVICE_PARAMETER_BITCLK_SHIFT 24
|
|
#define SPFI_DEVICE_PARAMETER_BITCLK_MASK 0xff
|
|
#define SPFI_DEVICE_PARAMETER_CSSETUP_SHIFT 16
|
|
#define SPFI_DEVICE_PARAMETER_CSSETUP_MASK 0xff
|
|
#define SPFI_DEVICE_PARAMETER_CSHOLD_SHIFT 8
|
|
#define SPFI_DEVICE_PARAMETER_CSHOLD_MASK 0xff
|
|
#define SPFI_DEVICE_PARAMETER_CSDELAY_SHIFT 0
|
|
#define SPFI_DEVICE_PARAMETER_CSDELAY_MASK 0xff
|
|
|
|
#define SPFI_CONTROL 0x14
|
|
#define SPFI_CONTROL_CONTINUE BIT(12)
|
|
#define SPFI_CONTROL_SOFT_RESET BIT(11)
|
|
#define SPFI_CONTROL_SEND_DMA BIT(10)
|
|
#define SPFI_CONTROL_GET_DMA BIT(9)
|
|
#define SPFI_CONTROL_SE BIT(8)
|
|
#define SPFI_CONTROL_TMODE_SHIFT 5
|
|
#define SPFI_CONTROL_TMODE_MASK 0x7
|
|
#define SPFI_CONTROL_TMODE_SINGLE 0
|
|
#define SPFI_CONTROL_TMODE_DUAL 1
|
|
#define SPFI_CONTROL_TMODE_QUAD 2
|
|
#define SPFI_CONTROL_SPFI_EN BIT(0)
|
|
|
|
#define SPFI_TRANSACTION 0x18
|
|
#define SPFI_TRANSACTION_TSIZE_SHIFT 16
|
|
#define SPFI_TRANSACTION_TSIZE_MASK 0xffff
|
|
|
|
#define SPFI_PORT_STATE 0x1c
|
|
#define SPFI_PORT_STATE_DEV_SEL_SHIFT 20
|
|
#define SPFI_PORT_STATE_DEV_SEL_MASK 0x7
|
|
#define SPFI_PORT_STATE_CK_POL(x) BIT(19 - (x))
|
|
#define SPFI_PORT_STATE_CK_PHASE(x) BIT(14 - (x))
|
|
|
|
#define SPFI_TX_32BIT_VALID_DATA 0x20
|
|
#define SPFI_TX_8BIT_VALID_DATA 0x24
|
|
#define SPFI_RX_32BIT_VALID_DATA 0x28
|
|
#define SPFI_RX_8BIT_VALID_DATA 0x2c
|
|
|
|
#define SPFI_INTERRUPT_STATUS 0x30
|
|
#define SPFI_INTERRUPT_ENABLE 0x34
|
|
#define SPFI_INTERRUPT_CLEAR 0x38
|
|
#define SPFI_INTERRUPT_IACCESS BIT(12)
|
|
#define SPFI_INTERRUPT_GDEX8BIT BIT(11)
|
|
#define SPFI_INTERRUPT_ALLDONETRIG BIT(9)
|
|
#define SPFI_INTERRUPT_GDFUL BIT(8)
|
|
#define SPFI_INTERRUPT_GDHF BIT(7)
|
|
#define SPFI_INTERRUPT_GDEX32BIT BIT(6)
|
|
#define SPFI_INTERRUPT_GDTRIG BIT(5)
|
|
#define SPFI_INTERRUPT_SDFUL BIT(3)
|
|
#define SPFI_INTERRUPT_SDHF BIT(2)
|
|
#define SPFI_INTERRUPT_SDE BIT(1)
|
|
#define SPFI_INTERRUPT_SDTRIG BIT(0)
|
|
|
|
/*
|
|
* There are four parallel FIFOs of 16 bytes each. The word buffer
|
|
* (*_32BIT_VALID_DATA) accesses all four FIFOs at once, resulting in an
|
|
* effective FIFO size of 64 bytes. The byte buffer (*_8BIT_VALID_DATA)
|
|
* accesses only a single FIFO, resulting in an effective FIFO size of
|
|
* 16 bytes.
|
|
*/
|
|
#define SPFI_32BIT_FIFO_SIZE 64
|
|
#define SPFI_8BIT_FIFO_SIZE 16
|
|
|
|
struct img_spfi {
|
|
struct device *dev;
|
|
struct spi_master *master;
|
|
spinlock_t lock;
|
|
|
|
void __iomem *regs;
|
|
phys_addr_t phys;
|
|
int irq;
|
|
struct clk *spfi_clk;
|
|
struct clk *sys_clk;
|
|
|
|
struct dma_chan *rx_ch;
|
|
struct dma_chan *tx_ch;
|
|
bool tx_dma_busy;
|
|
bool rx_dma_busy;
|
|
};
|
|
|
|
static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg)
|
|
{
|
|
return readl(spfi->regs + reg);
|
|
}
|
|
|
|
static inline void spfi_writel(struct img_spfi *spfi, u32 val, u32 reg)
|
|
{
|
|
writel(val, spfi->regs + reg);
|
|
}
|
|
|
|
static inline void spfi_start(struct img_spfi *spfi)
|
|
{
|
|
u32 val;
|
|
|
|
val = spfi_readl(spfi, SPFI_CONTROL);
|
|
val |= SPFI_CONTROL_SPFI_EN;
|
|
spfi_writel(spfi, val, SPFI_CONTROL);
|
|
}
|
|
|
|
static inline void spfi_reset(struct img_spfi *spfi)
|
|
{
|
|
spfi_writel(spfi, SPFI_CONTROL_SOFT_RESET, SPFI_CONTROL);
|
|
spfi_writel(spfi, 0, SPFI_CONTROL);
|
|
}
|
|
|
|
static int spfi_wait_all_done(struct img_spfi *spfi)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(50);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
|
|
|
|
if (status & SPFI_INTERRUPT_ALLDONETRIG) {
|
|
spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG,
|
|
SPFI_INTERRUPT_CLEAR);
|
|
return 0;
|
|
}
|
|
cpu_relax();
|
|
}
|
|
|
|
dev_err(spfi->dev, "Timed out waiting for transaction to complete\n");
|
|
spfi_reset(spfi);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static unsigned int spfi_pio_write32(struct img_spfi *spfi, const u32 *buf,
|
|
unsigned int max)
|
|
{
|
|
unsigned int count = 0;
|
|
u32 status;
|
|
|
|
while (count < max / 4) {
|
|
spfi_writel(spfi, SPFI_INTERRUPT_SDFUL, SPFI_INTERRUPT_CLEAR);
|
|
status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
|
|
if (status & SPFI_INTERRUPT_SDFUL)
|
|
break;
|
|
spfi_writel(spfi, buf[count], SPFI_TX_32BIT_VALID_DATA);
|
|
count++;
|
|
}
|
|
|
|
return count * 4;
|
|
}
|
|
|
|
static unsigned int spfi_pio_write8(struct img_spfi *spfi, const u8 *buf,
|
|
unsigned int max)
|
|
{
|
|
unsigned int count = 0;
|
|
u32 status;
|
|
|
|
while (count < max) {
|
|
spfi_writel(spfi, SPFI_INTERRUPT_SDFUL, SPFI_INTERRUPT_CLEAR);
|
|
status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
|
|
if (status & SPFI_INTERRUPT_SDFUL)
|
|
break;
|
|
spfi_writel(spfi, buf[count], SPFI_TX_8BIT_VALID_DATA);
|
|
count++;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static unsigned int spfi_pio_read32(struct img_spfi *spfi, u32 *buf,
|
|
unsigned int max)
|
|
{
|
|
unsigned int count = 0;
|
|
u32 status;
|
|
|
|
while (count < max / 4) {
|
|
spfi_writel(spfi, SPFI_INTERRUPT_GDEX32BIT,
|
|
SPFI_INTERRUPT_CLEAR);
|
|
status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
|
|
if (!(status & SPFI_INTERRUPT_GDEX32BIT))
|
|
break;
|
|
buf[count] = spfi_readl(spfi, SPFI_RX_32BIT_VALID_DATA);
|
|
count++;
|
|
}
|
|
|
|
return count * 4;
|
|
}
|
|
|
|
static unsigned int spfi_pio_read8(struct img_spfi *spfi, u8 *buf,
|
|
unsigned int max)
|
|
{
|
|
unsigned int count = 0;
|
|
u32 status;
|
|
|
|
while (count < max) {
|
|
spfi_writel(spfi, SPFI_INTERRUPT_GDEX8BIT,
|
|
SPFI_INTERRUPT_CLEAR);
|
|
status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
|
|
if (!(status & SPFI_INTERRUPT_GDEX8BIT))
|
|
break;
|
|
buf[count] = spfi_readl(spfi, SPFI_RX_8BIT_VALID_DATA);
|
|
count++;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static int img_spfi_start_pio(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct img_spfi *spfi = spi_master_get_devdata(spi->master);
|
|
unsigned int tx_bytes = 0, rx_bytes = 0;
|
|
const void *tx_buf = xfer->tx_buf;
|
|
void *rx_buf = xfer->rx_buf;
|
|
unsigned long timeout;
|
|
int ret;
|
|
|
|
if (tx_buf)
|
|
tx_bytes = xfer->len;
|
|
if (rx_buf)
|
|
rx_bytes = xfer->len;
|
|
|
|
spfi_start(spfi);
|
|
|
|
timeout = jiffies +
|
|
msecs_to_jiffies(xfer->len * 8 * 1000 / xfer->speed_hz + 100);
|
|
while ((tx_bytes > 0 || rx_bytes > 0) &&
|
|
time_before(jiffies, timeout)) {
|
|
unsigned int tx_count, rx_count;
|
|
|
|
if (tx_bytes >= 4)
|
|
tx_count = spfi_pio_write32(spfi, tx_buf, tx_bytes);
|
|
else
|
|
tx_count = spfi_pio_write8(spfi, tx_buf, tx_bytes);
|
|
|
|
if (rx_bytes >= 4)
|
|
rx_count = spfi_pio_read32(spfi, rx_buf, rx_bytes);
|
|
else
|
|
rx_count = spfi_pio_read8(spfi, rx_buf, rx_bytes);
|
|
|
|
tx_buf += tx_count;
|
|
rx_buf += rx_count;
|
|
tx_bytes -= tx_count;
|
|
rx_bytes -= rx_count;
|
|
|
|
cpu_relax();
|
|
}
|
|
|
|
ret = spfi_wait_all_done(spfi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (rx_bytes > 0 || tx_bytes > 0) {
|
|
dev_err(spfi->dev, "PIO transfer timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void img_spfi_dma_rx_cb(void *data)
|
|
{
|
|
struct img_spfi *spfi = data;
|
|
unsigned long flags;
|
|
|
|
spfi_wait_all_done(spfi);
|
|
|
|
spin_lock_irqsave(&spfi->lock, flags);
|
|
spfi->rx_dma_busy = false;
|
|
if (!spfi->tx_dma_busy)
|
|
spi_finalize_current_transfer(spfi->master);
|
|
spin_unlock_irqrestore(&spfi->lock, flags);
|
|
}
|
|
|
|
static void img_spfi_dma_tx_cb(void *data)
|
|
{
|
|
struct img_spfi *spfi = data;
|
|
unsigned long flags;
|
|
|
|
spfi_wait_all_done(spfi);
|
|
|
|
spin_lock_irqsave(&spfi->lock, flags);
|
|
spfi->tx_dma_busy = false;
|
|
if (!spfi->rx_dma_busy)
|
|
spi_finalize_current_transfer(spfi->master);
|
|
spin_unlock_irqrestore(&spfi->lock, flags);
|
|
}
|
|
|
|
static int img_spfi_start_dma(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct img_spfi *spfi = spi_master_get_devdata(spi->master);
|
|
struct dma_async_tx_descriptor *rxdesc = NULL, *txdesc = NULL;
|
|
struct dma_slave_config rxconf, txconf;
|
|
|
|
spfi->rx_dma_busy = false;
|
|
spfi->tx_dma_busy = false;
|
|
|
|
if (xfer->rx_buf) {
|
|
rxconf.direction = DMA_DEV_TO_MEM;
|
|
if (xfer->len % 4 == 0) {
|
|
rxconf.src_addr = spfi->phys + SPFI_RX_32BIT_VALID_DATA;
|
|
rxconf.src_addr_width = 4;
|
|
rxconf.src_maxburst = 4;
|
|
} else {
|
|
rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA;
|
|
rxconf.src_addr_width = 1;
|
|
rxconf.src_maxburst = 4;
|
|
}
|
|
dmaengine_slave_config(spfi->rx_ch, &rxconf);
|
|
|
|
rxdesc = dmaengine_prep_slave_sg(spfi->rx_ch, xfer->rx_sg.sgl,
|
|
xfer->rx_sg.nents,
|
|
DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT);
|
|
if (!rxdesc)
|
|
goto stop_dma;
|
|
|
|
rxdesc->callback = img_spfi_dma_rx_cb;
|
|
rxdesc->callback_param = spfi;
|
|
}
|
|
|
|
if (xfer->tx_buf) {
|
|
txconf.direction = DMA_MEM_TO_DEV;
|
|
if (xfer->len % 4 == 0) {
|
|
txconf.dst_addr = spfi->phys + SPFI_TX_32BIT_VALID_DATA;
|
|
txconf.dst_addr_width = 4;
|
|
txconf.dst_maxburst = 4;
|
|
} else {
|
|
txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA;
|
|
txconf.dst_addr_width = 1;
|
|
txconf.dst_maxburst = 4;
|
|
}
|
|
dmaengine_slave_config(spfi->tx_ch, &txconf);
|
|
|
|
txdesc = dmaengine_prep_slave_sg(spfi->tx_ch, xfer->tx_sg.sgl,
|
|
xfer->tx_sg.nents,
|
|
DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT);
|
|
if (!txdesc)
|
|
goto stop_dma;
|
|
|
|
txdesc->callback = img_spfi_dma_tx_cb;
|
|
txdesc->callback_param = spfi;
|
|
}
|
|
|
|
if (xfer->rx_buf) {
|
|
spfi->rx_dma_busy = true;
|
|
dmaengine_submit(rxdesc);
|
|
dma_async_issue_pending(spfi->rx_ch);
|
|
}
|
|
|
|
spfi_start(spfi);
|
|
|
|
if (xfer->tx_buf) {
|
|
spfi->tx_dma_busy = true;
|
|
dmaengine_submit(txdesc);
|
|
dma_async_issue_pending(spfi->tx_ch);
|
|
}
|
|
|
|
return 1;
|
|
|
|
stop_dma:
|
|
dmaengine_terminate_all(spfi->rx_ch);
|
|
dmaengine_terminate_all(spfi->tx_ch);
|
|
return -EIO;
|
|
}
|
|
|
|
static void img_spfi_handle_err(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
struct img_spfi *spfi = spi_master_get_devdata(master);
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Stop all DMA and reset the controller if the previous transaction
|
|
* timed-out and never completed it's DMA.
|
|
*/
|
|
spin_lock_irqsave(&spfi->lock, flags);
|
|
if (spfi->tx_dma_busy || spfi->rx_dma_busy) {
|
|
spfi->tx_dma_busy = false;
|
|
spfi->rx_dma_busy = false;
|
|
|
|
dmaengine_terminate_all(spfi->tx_ch);
|
|
dmaengine_terminate_all(spfi->rx_ch);
|
|
}
|
|
spin_unlock_irqrestore(&spfi->lock, flags);
|
|
}
|
|
|
|
static int img_spfi_prepare(struct spi_master *master, struct spi_message *msg)
|
|
{
|
|
struct img_spfi *spfi = spi_master_get_devdata(master);
|
|
u32 val;
|
|
|
|
val = spfi_readl(spfi, SPFI_PORT_STATE);
|
|
if (msg->spi->mode & SPI_CPHA)
|
|
val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
|
|
else
|
|
val &= ~SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
|
|
if (msg->spi->mode & SPI_CPOL)
|
|
val |= SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
|
|
else
|
|
val &= ~SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
|
|
spfi_writel(spfi, val, SPFI_PORT_STATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int img_spfi_unprepare(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
struct img_spfi *spfi = spi_master_get_devdata(master);
|
|
|
|
spfi_reset(spfi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int img_spfi_setup(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ?
|
|
GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
|
|
dev_name(&spi->dev));
|
|
if (ret)
|
|
dev_err(&spi->dev, "can't request chipselect gpio %d\n",
|
|
spi->cs_gpio);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void img_spfi_cleanup(struct spi_device *spi)
|
|
{
|
|
gpio_free(spi->cs_gpio);
|
|
}
|
|
|
|
static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct img_spfi *spfi = spi_master_get_devdata(spi->master);
|
|
u32 val, div;
|
|
|
|
/*
|
|
* output = spfi_clk * (BITCLK / 512), where BITCLK must be a
|
|
* power of 2 up to 128
|
|
*/
|
|
div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz);
|
|
div = clamp(512 / (1 << get_count_order(div)), 1, 128);
|
|
|
|
val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select));
|
|
val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK <<
|
|
SPFI_DEVICE_PARAMETER_BITCLK_SHIFT);
|
|
val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT;
|
|
spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select));
|
|
|
|
spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT,
|
|
SPFI_TRANSACTION);
|
|
|
|
val = spfi_readl(spfi, SPFI_CONTROL);
|
|
val &= ~(SPFI_CONTROL_SEND_DMA | SPFI_CONTROL_GET_DMA);
|
|
if (xfer->tx_buf)
|
|
val |= SPFI_CONTROL_SEND_DMA;
|
|
if (xfer->rx_buf)
|
|
val |= SPFI_CONTROL_GET_DMA;
|
|
val &= ~(SPFI_CONTROL_TMODE_MASK << SPFI_CONTROL_TMODE_SHIFT);
|
|
if (xfer->tx_nbits == SPI_NBITS_DUAL &&
|
|
xfer->rx_nbits == SPI_NBITS_DUAL)
|
|
val |= SPFI_CONTROL_TMODE_DUAL << SPFI_CONTROL_TMODE_SHIFT;
|
|
else if (xfer->tx_nbits == SPI_NBITS_QUAD &&
|
|
xfer->rx_nbits == SPI_NBITS_QUAD)
|
|
val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT;
|
|
val |= SPFI_CONTROL_SE;
|
|
spfi_writel(spfi, val, SPFI_CONTROL);
|
|
}
|
|
|
|
static int img_spfi_transfer_one(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct img_spfi *spfi = spi_master_get_devdata(spi->master);
|
|
int ret;
|
|
|
|
if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) {
|
|
dev_err(spfi->dev,
|
|
"Transfer length (%d) is greater than the max supported (%d)",
|
|
xfer->len, SPFI_TRANSACTION_TSIZE_MASK);
|
|
return -EINVAL;
|
|
}
|
|
|
|
img_spfi_config(master, spi, xfer);
|
|
if (master->can_dma && master->can_dma(master, spi, xfer))
|
|
ret = img_spfi_start_dma(master, spi, xfer);
|
|
else
|
|
ret = img_spfi_start_pio(master, spi, xfer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool img_spfi_can_dma(struct spi_master *master, struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
if (xfer->len > SPFI_32BIT_FIFO_SIZE)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static irqreturn_t img_spfi_irq(int irq, void *dev_id)
|
|
{
|
|
struct img_spfi *spfi = (struct img_spfi *)dev_id;
|
|
u32 status;
|
|
|
|
status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
|
|
if (status & SPFI_INTERRUPT_IACCESS) {
|
|
spfi_writel(spfi, SPFI_INTERRUPT_IACCESS, SPFI_INTERRUPT_CLEAR);
|
|
dev_err(spfi->dev, "Illegal access interrupt");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int img_spfi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct img_spfi *spfi;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*spfi));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
spfi = spi_master_get_devdata(master);
|
|
spfi->dev = &pdev->dev;
|
|
spfi->master = master;
|
|
spin_lock_init(&spfi->lock);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
spfi->regs = devm_ioremap_resource(spfi->dev, res);
|
|
if (IS_ERR(spfi->regs)) {
|
|
ret = PTR_ERR(spfi->regs);
|
|
goto put_spi;
|
|
}
|
|
spfi->phys = res->start;
|
|
|
|
spfi->irq = platform_get_irq(pdev, 0);
|
|
if (spfi->irq < 0) {
|
|
ret = spfi->irq;
|
|
goto put_spi;
|
|
}
|
|
ret = devm_request_irq(spfi->dev, spfi->irq, img_spfi_irq,
|
|
IRQ_TYPE_LEVEL_HIGH, dev_name(spfi->dev), spfi);
|
|
if (ret)
|
|
goto put_spi;
|
|
|
|
spfi->sys_clk = devm_clk_get(spfi->dev, "sys");
|
|
if (IS_ERR(spfi->sys_clk)) {
|
|
ret = PTR_ERR(spfi->sys_clk);
|
|
goto put_spi;
|
|
}
|
|
spfi->spfi_clk = devm_clk_get(spfi->dev, "spfi");
|
|
if (IS_ERR(spfi->spfi_clk)) {
|
|
ret = PTR_ERR(spfi->spfi_clk);
|
|
goto put_spi;
|
|
}
|
|
|
|
ret = clk_prepare_enable(spfi->sys_clk);
|
|
if (ret)
|
|
goto put_spi;
|
|
ret = clk_prepare_enable(spfi->spfi_clk);
|
|
if (ret)
|
|
goto disable_pclk;
|
|
|
|
spfi_reset(spfi);
|
|
/*
|
|
* Only enable the error (IACCESS) interrupt. In PIO mode we'll
|
|
* poll the status of the FIFOs.
|
|
*/
|
|
spfi_writel(spfi, SPFI_INTERRUPT_IACCESS, SPFI_INTERRUPT_ENABLE);
|
|
|
|
master->auto_runtime_pm = true;
|
|
master->bus_num = pdev->id;
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_DUAL | SPI_RX_DUAL;
|
|
if (of_property_read_bool(spfi->dev->of_node, "img,supports-quad-mode"))
|
|
master->mode_bits |= SPI_TX_QUAD | SPI_RX_QUAD;
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8);
|
|
master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4;
|
|
master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512;
|
|
|
|
master->setup = img_spfi_setup;
|
|
master->cleanup = img_spfi_cleanup;
|
|
master->transfer_one = img_spfi_transfer_one;
|
|
master->prepare_message = img_spfi_prepare;
|
|
master->unprepare_message = img_spfi_unprepare;
|
|
master->handle_err = img_spfi_handle_err;
|
|
|
|
spfi->tx_ch = dma_request_slave_channel(spfi->dev, "tx");
|
|
spfi->rx_ch = dma_request_slave_channel(spfi->dev, "rx");
|
|
if (!spfi->tx_ch || !spfi->rx_ch) {
|
|
if (spfi->tx_ch)
|
|
dma_release_channel(spfi->tx_ch);
|
|
if (spfi->rx_ch)
|
|
dma_release_channel(spfi->rx_ch);
|
|
dev_warn(spfi->dev, "Failed to get DMA channels, falling back to PIO mode\n");
|
|
} else {
|
|
master->dma_tx = spfi->tx_ch;
|
|
master->dma_rx = spfi->rx_ch;
|
|
master->can_dma = img_spfi_can_dma;
|
|
}
|
|
|
|
pm_runtime_set_active(spfi->dev);
|
|
pm_runtime_enable(spfi->dev);
|
|
|
|
ret = devm_spi_register_master(spfi->dev, master);
|
|
if (ret)
|
|
goto disable_pm;
|
|
|
|
return 0;
|
|
|
|
disable_pm:
|
|
pm_runtime_disable(spfi->dev);
|
|
if (spfi->rx_ch)
|
|
dma_release_channel(spfi->rx_ch);
|
|
if (spfi->tx_ch)
|
|
dma_release_channel(spfi->tx_ch);
|
|
clk_disable_unprepare(spfi->spfi_clk);
|
|
disable_pclk:
|
|
clk_disable_unprepare(spfi->sys_clk);
|
|
put_spi:
|
|
spi_master_put(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int img_spfi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct img_spfi *spfi = spi_master_get_devdata(master);
|
|
|
|
if (spfi->tx_ch)
|
|
dma_release_channel(spfi->tx_ch);
|
|
if (spfi->rx_ch)
|
|
dma_release_channel(spfi->rx_ch);
|
|
|
|
pm_runtime_disable(spfi->dev);
|
|
if (!pm_runtime_status_suspended(spfi->dev)) {
|
|
clk_disable_unprepare(spfi->spfi_clk);
|
|
clk_disable_unprepare(spfi->sys_clk);
|
|
}
|
|
|
|
spi_master_put(master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int img_spfi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct img_spfi *spfi = spi_master_get_devdata(master);
|
|
|
|
clk_disable_unprepare(spfi->spfi_clk);
|
|
clk_disable_unprepare(spfi->sys_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int img_spfi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct img_spfi *spfi = spi_master_get_devdata(master);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(spfi->sys_clk);
|
|
if (ret)
|
|
return ret;
|
|
ret = clk_prepare_enable(spfi->spfi_clk);
|
|
if (ret) {
|
|
clk_disable_unprepare(spfi->sys_clk);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int img_spfi_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
|
|
return spi_master_suspend(master);
|
|
}
|
|
|
|
static int img_spfi_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct img_spfi *spfi = spi_master_get_devdata(master);
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret)
|
|
return ret;
|
|
spfi_reset(spfi);
|
|
pm_runtime_put(dev);
|
|
|
|
return spi_master_resume(master);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct dev_pm_ops img_spfi_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(img_spfi_runtime_suspend, img_spfi_runtime_resume,
|
|
NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(img_spfi_suspend, img_spfi_resume)
|
|
};
|
|
|
|
static const struct of_device_id img_spfi_of_match[] = {
|
|
{ .compatible = "img,spfi", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, img_spfi_of_match);
|
|
|
|
static struct platform_driver img_spfi_driver = {
|
|
.driver = {
|
|
.name = "img-spfi",
|
|
.pm = &img_spfi_pm_ops,
|
|
.of_match_table = of_match_ptr(img_spfi_of_match),
|
|
},
|
|
.probe = img_spfi_probe,
|
|
.remove = img_spfi_remove,
|
|
};
|
|
module_platform_driver(img_spfi_driver);
|
|
|
|
MODULE_DESCRIPTION("IMG SPFI controller driver");
|
|
MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>");
|
|
MODULE_LICENSE("GPL v2");
|