forked from Minki/linux
60ffdb3654
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
310 lines
6.7 KiB
ArmAsm
310 lines
6.7 KiB
ArmAsm
/*
|
|
* Interrupt Entries
|
|
*
|
|
* Copyright 2005-2009 Analog Devices Inc.
|
|
* D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
|
|
* Kenneth Albanowski <kjahds@kjahds.com>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <asm/blackfin.h>
|
|
#include <mach/irq.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/entry.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/trace.h>
|
|
#include <asm/traps.h>
|
|
#include <asm/thread_info.h>
|
|
|
|
#include <asm/context.S>
|
|
|
|
.extern _ret_from_exception
|
|
|
|
#ifdef CONFIG_I_ENTRY_L1
|
|
.section .l1.text
|
|
#else
|
|
.text
|
|
#endif
|
|
|
|
.align 4 /* just in case */
|
|
|
|
/* Common interrupt entry code. First we do CLI, then push
|
|
* RETI, to keep interrupts disabled, but to allow this state to be changed
|
|
* by local_bh_enable.
|
|
* R0 contains the interrupt number, while R1 may contain the value of IPEND,
|
|
* or garbage if IPEND won't be needed by the ISR. */
|
|
__common_int_entry:
|
|
[--sp] = fp;
|
|
[--sp] = usp;
|
|
|
|
[--sp] = i0;
|
|
[--sp] = i1;
|
|
[--sp] = i2;
|
|
[--sp] = i3;
|
|
|
|
[--sp] = m0;
|
|
[--sp] = m1;
|
|
[--sp] = m2;
|
|
[--sp] = m3;
|
|
|
|
[--sp] = l0;
|
|
[--sp] = l1;
|
|
[--sp] = l2;
|
|
[--sp] = l3;
|
|
|
|
[--sp] = b0;
|
|
[--sp] = b1;
|
|
[--sp] = b2;
|
|
[--sp] = b3;
|
|
[--sp] = a0.x;
|
|
[--sp] = a0.w;
|
|
[--sp] = a1.x;
|
|
[--sp] = a1.w;
|
|
|
|
[--sp] = LC0;
|
|
[--sp] = LC1;
|
|
[--sp] = LT0;
|
|
[--sp] = LT1;
|
|
[--sp] = LB0;
|
|
[--sp] = LB1;
|
|
|
|
[--sp] = ASTAT;
|
|
|
|
[--sp] = r0; /* Skip reserved */
|
|
[--sp] = RETS;
|
|
r2 = RETI;
|
|
[--sp] = r2;
|
|
[--sp] = RETX;
|
|
[--sp] = RETN;
|
|
[--sp] = RETE;
|
|
[--sp] = SEQSTAT;
|
|
[--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */
|
|
|
|
/* Switch to other method of keeping interrupts disabled. */
|
|
#ifdef CONFIG_DEBUG_HWERR
|
|
r1 = 0x3f;
|
|
sti r1;
|
|
#else
|
|
cli r1;
|
|
#endif
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
[--sp] = r0;
|
|
sp += -12;
|
|
call _trace_hardirqs_off;
|
|
sp += 12;
|
|
r0 = [sp++];
|
|
#endif
|
|
[--sp] = RETI; /* orig_pc */
|
|
/* Clear all L registers. */
|
|
r1 = 0 (x);
|
|
l0 = r1;
|
|
l1 = r1;
|
|
l2 = r1;
|
|
l3 = r1;
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
fp = 0;
|
|
#endif
|
|
|
|
ANOMALY_283_315_WORKAROUND(p5, r7)
|
|
|
|
r1 = sp;
|
|
SP += -12;
|
|
#ifdef CONFIG_IPIPE
|
|
call ___ipipe_grab_irq
|
|
SP += 12;
|
|
cc = r0 == 0;
|
|
if cc jump .Lcommon_restore_context;
|
|
#else /* CONFIG_IPIPE */
|
|
pseudo_long_call _do_irq, p2;
|
|
SP += 12;
|
|
#endif /* CONFIG_IPIPE */
|
|
pseudo_long_call _return_from_int, p2;
|
|
.Lcommon_restore_context:
|
|
RESTORE_CONTEXT
|
|
rti;
|
|
|
|
/* interrupt routine for ivhw - 5 */
|
|
ENTRY(_evt_ivhw)
|
|
/* In case a single action kicks off multiple memory transactions, (like
|
|
* a cache line fetch, - this can cause multiple hardware errors, let's
|
|
* catch them all. First - make sure all the actions are complete, and
|
|
* the core sees the hardware errors.
|
|
*/
|
|
SSYNC;
|
|
SSYNC;
|
|
|
|
SAVE_ALL_SYS
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
fp = 0;
|
|
#endif
|
|
|
|
ANOMALY_283_315_WORKAROUND(p5, r7)
|
|
|
|
/* Handle all stacked hardware errors
|
|
* To make sure we don't hang forever, only do it 10 times
|
|
*/
|
|
R0 = 0;
|
|
R2 = 10;
|
|
1:
|
|
P0.L = LO(ILAT);
|
|
P0.H = HI(ILAT);
|
|
R1 = [P0];
|
|
CC = BITTST(R1, EVT_IVHW_P);
|
|
IF ! CC JUMP 2f;
|
|
/* OK a hardware error is pending - clear it */
|
|
R1 = EVT_IVHW_P;
|
|
[P0] = R1;
|
|
R0 += 1;
|
|
CC = R1 == R2;
|
|
if CC JUMP 2f;
|
|
JUMP 1b;
|
|
2:
|
|
# We are going to dump something out, so make sure we print IPEND properly
|
|
p2.l = lo(IPEND);
|
|
p2.h = hi(IPEND);
|
|
r0 = [p2];
|
|
[sp + PT_IPEND] = r0;
|
|
|
|
/* set the EXCAUSE to HWERR for trap_c */
|
|
r0 = [sp + PT_SEQSTAT];
|
|
R1.L = LO(VEC_HWERR);
|
|
R1.H = HI(VEC_HWERR);
|
|
R0 = R0 | R1;
|
|
[sp + PT_SEQSTAT] = R0;
|
|
|
|
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
|
|
SP += -12;
|
|
pseudo_long_call _trap_c, p5;
|
|
SP += 12;
|
|
|
|
#ifdef EBIU_ERRMST
|
|
/* make sure EBIU_ERRMST is clear */
|
|
p0.l = LO(EBIU_ERRMST);
|
|
p0.h = HI(EBIU_ERRMST);
|
|
r0.l = (CORE_ERROR | CORE_MERROR);
|
|
w[p0] = r0.l;
|
|
#endif
|
|
|
|
pseudo_long_call _ret_from_exception, p2;
|
|
|
|
.Lcommon_restore_all_sys:
|
|
RESTORE_ALL_SYS
|
|
rti;
|
|
ENDPROC(_evt_ivhw)
|
|
|
|
/* Interrupt routine for evt2 (NMI).
|
|
* For inner circle type details, please see:
|
|
* http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
|
|
*/
|
|
ENTRY(_evt_nmi)
|
|
#ifndef CONFIG_NMI_WATCHDOG
|
|
.weak _evt_nmi
|
|
#else
|
|
/* Not take account of CPLBs, this handler will not return */
|
|
SAVE_ALL_SYS
|
|
r0 = sp;
|
|
r1 = retn;
|
|
[sp + PT_PC] = r1;
|
|
trace_buffer_save(p4,r5);
|
|
|
|
ANOMALY_283_315_WORKAROUND(p4, r5)
|
|
|
|
SP += -12;
|
|
call _do_nmi;
|
|
SP += 12;
|
|
1:
|
|
jump 1b;
|
|
#endif
|
|
rtn;
|
|
ENDPROC(_evt_nmi)
|
|
|
|
/* interrupt routine for core timer - 6 */
|
|
ENTRY(_evt_timer)
|
|
TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)
|
|
|
|
/* interrupt routine for evt7 - 7 */
|
|
ENTRY(_evt_evt7)
|
|
INTERRUPT_ENTRY(EVT_IVG7_P)
|
|
ENTRY(_evt_evt8)
|
|
INTERRUPT_ENTRY(EVT_IVG8_P)
|
|
ENTRY(_evt_evt9)
|
|
INTERRUPT_ENTRY(EVT_IVG9_P)
|
|
ENTRY(_evt_evt10)
|
|
INTERRUPT_ENTRY(EVT_IVG10_P)
|
|
ENTRY(_evt_evt11)
|
|
INTERRUPT_ENTRY(EVT_IVG11_P)
|
|
ENTRY(_evt_evt12)
|
|
INTERRUPT_ENTRY(EVT_IVG12_P)
|
|
ENTRY(_evt_evt13)
|
|
INTERRUPT_ENTRY(EVT_IVG13_P)
|
|
|
|
|
|
/* interrupt routine for system_call - 15 */
|
|
ENTRY(_evt_system_call)
|
|
SAVE_CONTEXT_SYSCALL
|
|
#ifdef CONFIG_FRAME_POINTER
|
|
fp = 0;
|
|
#endif
|
|
pseudo_long_call _system_call, p2;
|
|
jump .Lcommon_restore_context;
|
|
ENDPROC(_evt_system_call)
|
|
|
|
#ifdef CONFIG_IPIPE
|
|
/*
|
|
* __ipipe_call_irqtail: lowers the current priority level to EVT15
|
|
* before running a user-defined routine, then raises the priority
|
|
* level to EVT14 to prepare the caller for a normal interrupt
|
|
* return through RTI.
|
|
*
|
|
* We currently use this facility in two occasions:
|
|
*
|
|
* - to branch to __ipipe_irq_tail_hook as requested by a high
|
|
* priority domain after the pipeline delivered an interrupt,
|
|
* e.g. such as Xenomai, in order to start its rescheduling
|
|
* procedure, since we may not switch tasks when IRQ levels are
|
|
* nested on the Blackfin, so we have to fake an interrupt return
|
|
* so that we may reschedule immediately.
|
|
*
|
|
* - to branch to sync_root_irqs, in order to play any interrupt
|
|
* pending for the root domain (i.e. the Linux kernel). This lowers
|
|
* the core priority level enough so that Linux IRQ handlers may
|
|
* never delay interrupts handled by high priority domains; we defer
|
|
* those handlers until this point instead. This is a substitute
|
|
* to using a threaded interrupt model for the Linux kernel.
|
|
*
|
|
* r0: address of user-defined routine
|
|
* context: caller must have preempted EVT15, hw interrupts must be off.
|
|
*/
|
|
ENTRY(___ipipe_call_irqtail)
|
|
p0 = r0;
|
|
r0.l = 1f;
|
|
r0.h = 1f;
|
|
reti = r0;
|
|
rti;
|
|
1:
|
|
[--sp] = rets;
|
|
[--sp] = ( r7:4, p5:3 );
|
|
sp += -12;
|
|
call (p0);
|
|
sp += 12;
|
|
( r7:4, p5:3 ) = [sp++];
|
|
rets = [sp++];
|
|
|
|
#ifdef CONFIG_DEBUG_HWERR
|
|
/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
|
|
r0 = (EVT_IVG14 | EVT_IVHW | \
|
|
EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
|
|
#else
|
|
/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
|
|
r0 = (EVT_IVG14 | \
|
|
EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
|
|
#endif
|
|
sti r0;
|
|
raise 14; /* Branches to _evt_evt14 */
|
|
2:
|
|
jump 2b; /* Likely paranoid. */
|
|
ENDPROC(___ipipe_call_irqtail)
|
|
|
|
#endif /* CONFIG_IPIPE */
|