forked from Minki/linux
6a686c3132
struct sdhci_pxa is private data of PXA SDHCI driver, but not used in sdhci-pxav2 at all. Drop unused references to struct sdhci_pxa. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
270 lines
6.8 KiB
C
270 lines
6.8 KiB
C
/*
|
|
* Copyright (C) 2010 Marvell International Ltd.
|
|
* Zhangfei Gao <zhangfei.gao@marvell.com>
|
|
* Kevin Wang <dwang4@marvell.com>
|
|
* Jun Nie <njun@marvell.com>
|
|
* Qiming Wu <wuqm@marvell.com>
|
|
* Philip Rakity <prakity@marvell.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/platform_data/pxa_sdhci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include "sdhci.h"
|
|
#include "sdhci-pltfm.h"
|
|
|
|
#define SD_FIFO_PARAM 0xe0
|
|
#define DIS_PAD_SD_CLK_GATE 0x0400 /* Turn on/off Dynamic SD Clock Gating */
|
|
#define CLK_GATE_ON 0x0200 /* Disable/enable Clock Gate */
|
|
#define CLK_GATE_CTL 0x0100 /* Clock Gate Control */
|
|
#define CLK_GATE_SETTING_BITS (DIS_PAD_SD_CLK_GATE | \
|
|
CLK_GATE_ON | CLK_GATE_CTL)
|
|
|
|
#define SD_CLOCK_BURST_SIZE_SETUP 0xe6
|
|
#define SDCLK_SEL_SHIFT 8
|
|
#define SDCLK_SEL_MASK 0x3
|
|
#define SDCLK_DELAY_SHIFT 10
|
|
#define SDCLK_DELAY_MASK 0x3c
|
|
|
|
#define SD_CE_ATA_2 0xea
|
|
#define MMC_CARD 0x1000
|
|
#define MMC_WIDTH 0x0100
|
|
|
|
static void pxav2_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
|
|
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
|
|
|
|
sdhci_reset(host, mask);
|
|
|
|
if (mask == SDHCI_RESET_ALL) {
|
|
u16 tmp = 0;
|
|
|
|
/*
|
|
* tune timing of read data/command when crc error happen
|
|
* no performance impact
|
|
*/
|
|
if (pdata && pdata->clk_delay_sel == 1) {
|
|
tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
|
|
|
|
tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT);
|
|
tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
|
|
<< SDCLK_DELAY_SHIFT;
|
|
tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT);
|
|
tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT;
|
|
|
|
writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
|
|
}
|
|
|
|
if (pdata && (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING)) {
|
|
tmp = readw(host->ioaddr + SD_FIFO_PARAM);
|
|
tmp &= ~CLK_GATE_SETTING_BITS;
|
|
writew(tmp, host->ioaddr + SD_FIFO_PARAM);
|
|
} else {
|
|
tmp = readw(host->ioaddr + SD_FIFO_PARAM);
|
|
tmp &= ~CLK_GATE_SETTING_BITS;
|
|
tmp |= CLK_GATE_SETTING_BITS;
|
|
writew(tmp, host->ioaddr + SD_FIFO_PARAM);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
|
|
{
|
|
u8 ctrl;
|
|
u16 tmp;
|
|
|
|
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
|
|
tmp = readw(host->ioaddr + SD_CE_ATA_2);
|
|
if (width == MMC_BUS_WIDTH_8) {
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
tmp |= MMC_CARD | MMC_WIDTH;
|
|
} else {
|
|
tmp &= ~(MMC_CARD | MMC_WIDTH);
|
|
if (width == MMC_BUS_WIDTH_4)
|
|
ctrl |= SDHCI_CTRL_4BITBUS;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
}
|
|
writew(tmp, host->ioaddr + SD_CE_ATA_2);
|
|
writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
}
|
|
|
|
static const struct sdhci_ops pxav2_sdhci_ops = {
|
|
.set_clock = sdhci_set_clock,
|
|
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
|
|
.set_bus_width = pxav2_mmc_set_bus_width,
|
|
.reset = pxav2_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id sdhci_pxav2_of_match[] = {
|
|
{
|
|
.compatible = "mrvl,pxav2-mmc",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match);
|
|
|
|
static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
|
|
{
|
|
struct sdhci_pxa_platdata *pdata;
|
|
struct device_node *np = dev->of_node;
|
|
u32 bus_width;
|
|
u32 clk_delay_cycles;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return NULL;
|
|
|
|
if (of_find_property(np, "non-removable", NULL))
|
|
pdata->flags |= PXA_FLAG_CARD_PERMANENT;
|
|
|
|
of_property_read_u32(np, "bus-width", &bus_width);
|
|
if (bus_width == 8)
|
|
pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
|
|
|
|
of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
|
|
if (clk_delay_cycles > 0) {
|
|
pdata->clk_delay_sel = 1;
|
|
pdata->clk_delay_cycles = clk_delay_cycles;
|
|
}
|
|
|
|
return pdata;
|
|
}
|
|
#else
|
|
static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static int sdhci_pxav2_probe(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
|
|
struct device *dev = &pdev->dev;
|
|
struct sdhci_host *host = NULL;
|
|
const struct of_device_id *match;
|
|
|
|
int ret;
|
|
struct clk *clk;
|
|
|
|
host = sdhci_pltfm_init(pdev, NULL, 0);
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
pltfm_host->priv = NULL;
|
|
|
|
clk = clk_get(dev, "PXA-SDHCLK");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "failed to get io clock\n");
|
|
ret = PTR_ERR(clk);
|
|
goto err_clk_get;
|
|
}
|
|
pltfm_host->clk = clk;
|
|
clk_prepare_enable(clk);
|
|
|
|
host->quirks = SDHCI_QUIRK_BROKEN_ADMA
|
|
| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
|
|
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
|
|
|
|
match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev);
|
|
if (match) {
|
|
pdata = pxav2_get_mmc_pdata(dev);
|
|
}
|
|
if (pdata) {
|
|
if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
|
|
/* on-chip device */
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
host->mmc->caps |= MMC_CAP_NONREMOVABLE;
|
|
}
|
|
|
|
/* If slot design supports 8 bit data, indicate this to MMC. */
|
|
if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
|
|
host->mmc->caps |= MMC_CAP_8_BIT_DATA;
|
|
|
|
if (pdata->quirks)
|
|
host->quirks |= pdata->quirks;
|
|
if (pdata->host_caps)
|
|
host->mmc->caps |= pdata->host_caps;
|
|
if (pdata->pm_caps)
|
|
host->mmc->pm_caps |= pdata->pm_caps;
|
|
}
|
|
|
|
host->ops = &pxav2_sdhci_ops;
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add host\n");
|
|
goto err_add_host;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
return 0;
|
|
|
|
err_add_host:
|
|
clk_disable_unprepare(clk);
|
|
clk_put(clk);
|
|
err_clk_get:
|
|
sdhci_pltfm_free(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_pxav2_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
sdhci_remove_host(host, 1);
|
|
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
clk_put(pltfm_host->clk);
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdhci_pxav2_driver = {
|
|
.driver = {
|
|
.name = "sdhci-pxav2",
|
|
#ifdef CONFIG_OF
|
|
.of_match_table = sdhci_pxav2_of_match,
|
|
#endif
|
|
.pm = SDHCI_PLTFM_PMOPS,
|
|
},
|
|
.probe = sdhci_pxav2_probe,
|
|
.remove = sdhci_pxav2_remove,
|
|
};
|
|
|
|
module_platform_driver(sdhci_pxav2_driver);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for pxav2");
|
|
MODULE_AUTHOR("Marvell International Ltd.");
|
|
MODULE_LICENSE("GPL v2");
|
|
|