forked from Minki/linux
10acba1293
dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
411 lines
9.9 KiB
Plaintext
411 lines
9.9 KiB
Plaintext
/*
|
|
* SAMSUNG Exynos7 Espresso board device tree source
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos7.dtsi"
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Samsung Exynos7 Espresso board based on EXYNOS7";
|
|
compatible = "samsung,exynos7-espresso", "samsung,exynos7";
|
|
|
|
aliases {
|
|
serial0 = &serial_2;
|
|
mshc0 = &mmc_0;
|
|
mshc2 = &mmc_2;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &serial_2;
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x40000000 0x0 0xC0000000>;
|
|
};
|
|
|
|
usb30_vbus_reg: regulator-usb30 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBUS_5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb30_vbus_en>;
|
|
enable-active-high;
|
|
};
|
|
|
|
usb3drd_boost_5v: regulator-usb3drd-boost {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VUSB_VBUS_5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb3drd_boost_en>;
|
|
enable-active-high;
|
|
};
|
|
|
|
};
|
|
|
|
&fin_pll {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&serial_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&adc {
|
|
status = "okay";
|
|
};
|
|
|
|
&hsi2c_4 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <200000>;
|
|
status = "okay";
|
|
|
|
s2mps15_pmic@66 {
|
|
compatible = "samsung,s2mps15-pmic";
|
|
reg = <0x66>;
|
|
interrupts = <2 IRQ_TYPE_NONE>;
|
|
interrupt-parent = <&gpa0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_irq>;
|
|
wakeup-source;
|
|
|
|
s2mps15_osc: clocks {
|
|
compatible = "samsung,s2mps13-clk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps13_ap", "s2mps13_cp",
|
|
"s2mps13_bt";
|
|
};
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "vdd_ldo1";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-always-on;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "vqmmc-sdcard";
|
|
regulator-min-microvolt = <1620000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "vdd_ldo3";
|
|
regulator-min-microvolt = <1620000>;
|
|
regulator-max-microvolt = <1980000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "vdd_ldo4";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1110000>;
|
|
regulator-always-on;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "vdd_ldo5";
|
|
regulator-min-microvolt = <1620000>;
|
|
regulator-max-microvolt = <1980000>;
|
|
regulator-always-on;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "vdd_ldo6";
|
|
regulator-min-microvolt = <2250000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "vdd_ldo7";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "vdd_ldo8";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "vdd_ldo9";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "vdd_ldo10";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "vdd_ldo11";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "vdd_ldo12";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "vdd_ldo13";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "vdd_ldo14";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3375000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "vmmc-sdcard";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3375000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "vdd_ldo18";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <2275000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "vdd_ldo19";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3375000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "vdd_ldo21";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3375000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "vdd_ldo23";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <2275000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "vdd_ldo25";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3375000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "vdd_ldo26";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1470000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "vdd_ldo27";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <2275000>;
|
|
regulator-enable-ramp-delay = <125>;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <25000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_atlas";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "vdd_buck5";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-ramp-delay = <25000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "vdd_buck7";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <25000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "vdd_buck8";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <25000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "vdd_buck9";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <25000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
|
|
buck10_reg: BUCK10 {
|
|
regulator-name = "vdd_buck10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <25000>;
|
|
regulator-enable-ramp-delay = <250>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl_alive {
|
|
pmic_irq: pmic-irq {
|
|
samsung,pins = "gpa0-2";
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
|
|
};
|
|
};
|
|
|
|
&mmc_0 {
|
|
status = "okay";
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
card-detect-delay = <200>;
|
|
clock-frequency = <800000000>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&mmc_2 {
|
|
status = "okay";
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <200>;
|
|
clock-frequency = <400000000>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&ldo17_reg>;
|
|
vqmmc-supply = <&ldo2_reg>;
|
|
disable-wp;
|
|
};
|
|
|
|
&pinctrl_bus1 {
|
|
usb30_vbus_en: usb30-vbus-en {
|
|
samsung,pins = "gph1-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
|
};
|
|
|
|
usb3drd_boost_en: usb3drd-boost-en {
|
|
samsung,pins = "gpf4-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
|
};
|
|
};
|
|
|
|
&usbdrd_phy {
|
|
vbus-supply = <&usb30_vbus_reg>;
|
|
vbus-boost-supply = <&usb3drd_boost_5v>;
|
|
};
|