forked from Minki/linux
6c71ee3b61
New core features - Selection of the clock source for IIO timestamps. This is done per device as it makes little sense to have events in one timebase and data timestamped on another. Biggest reason for this is that we currently use a clock source which is non monotonic which can result in 'interesting' data sets. (Includes export for get_monotonic_corse64 which Thomas Gleixner didn't mind in an earlier version.) - MAINTAINERS add the git tree to the list for IIO. New device support + a kind of indirect staging graduation. * Broadcom iproc-static-adc - new driver * mcp4531 - support for MCP454x, MCP456x, MCP464x and MCP466x potentiometers * mpu6050 - support the IC20608 6 axis motion tracking device * st-sensors - support the lis3l02dq + drop the lis3l02dq driver from staging. The general purpose driver is missing event support, but good to get rid of this driver which was rather long in the tooth. New driver features * ak8975 - Add vid regulator support and refactor handling in general. - Allow a delay after enabling regulators. - Runtime and system PM. * bmg160 - filter frequency control support. * bmp280 - SPI device support. - EOC interrupt support for the BMP085 - power management support. - supply regulator support. - reset gpio support - dt bindings for reset gpio and regulators. - of table to support device tree registration * max1363 - Device tree bindings. * mcp4531 - Device tree bindings. * st-pressure - temperature channels as part of triggered buffer (previously not due probably to alignment issues - see below). - lps22hb open drain interrupt support. - lps22hb temperature channel support Cleanups and reworkings. * numerous ADC drivers - ensure the iio_dev->dev.of_node is set to the parent dev.of_node so as to allow client bindings to find the device. * ak8975 - Fix incorrect handling of missing regulator - make sure power is down and remove. * bmp280 - read the calibration data only once as it doesn't change. * isl29125 - Use a few macros to make code a touch more readable. * mma8452 - fix a memory leak on error. - drop an unecessary bit of return value handling. * potentiometer kconfig - typo fix. * st-pressure - drop some uninformative default assignments of elements of the channel array structure (aids readability). * st-sensors - Harden interrupt handling considerably. These are actually all using level interrupts, but at least two known boards have them wired to edge only interrupt chips. Hence a slightly interesting bit of handling is needed in which we first allow for the easy option (level triggered) and secondly check the status registers before reenabling edge interrupts and fall back to a tight loop in the thread until we successfully clear the interrupt. No harm is done if we never succeed in doing so. It's an odd patch that has been through a lot of revisions to reach a consensus on how to handle what is basically broken hardware (which the previous defaults allowed to kind of work). - Fix alignment to defined storagebytes boundaries. - Ensure alignment of power of 2 byte boundaries. This has always in theory been part of the ABI of IIO, but we missed a few that snuck in that need fixing. The effect was minor as they were only followed by timestamp channels which were correctly aligned, - Add some docs to explain the gain calculations. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIuBAABCAAYBQJXfBqnERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIqjwP /0OJbr8kIa1i6+iCqCRCPCixdymd6k9wvjDaKSQoDeamen+8iKOLZNhXJJjOX8hd eCRMrCJbvY96Bl2Ll51TCEBb8R1xppCwwYIYylKhF9CL6N2ndapzWY0G4XZb6pc0 e1JIa6uxynAAEsfplBskk4Ytf5PPHDOWER5WsTmxlZcTTAL9gLxIlii2Du0AmeN/ tANVzwuvK07i5HHuZfYV2h2+OWDSlm4Y5rvE7t8keWpp6wnZ0XtiIw1WjkpR1OY7 KiKGKRJMomFlp51hP9IKqc20Dweiaf3lHS7BDggvkB11VxyajQTcjvogxQ0BSPUv 7PTHHlk8txgEUMqrDWP8x0TL97iNt3hiOZ0/rI3IZdFLC8pnibewnB+uHEGCH3tv bqToPtpJHjsIiGlCGVxvt8BRgqT5Qq7JT65hYS6774uFcQiPEvPDI44BDqUxaDUf /1WFM23VB4KJpx8JnL+nC8iu6DBnVPDWDKAsjGgc+ljnz3VRcSxWz5P0yMFZRMA2 mbLiG2yiD4oD/LcI8FeZh9X50Irg09ElAWu07VRymrYMRfCYLXO07o5nZJ0bOqOB R+1MToYaHz2g6jJ+KGVC0Ul5EuULzymqH0CMbdjWnaD9AaoPuOKkNfUVBkzRK0t/ TO/wLHm/qNbk+zGZHQFU15mH1Nn9leEJ/uCdnGqkRo7i =FxNN -----END PGP SIGNATURE----- Merge tag 'iio-for-4.8c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of IIO new device support, features and cleanups for the 4.8 cycle. New core features - Selection of the clock source for IIO timestamps. This is done per device as it makes little sense to have events in one timebase and data timestamped on another. Biggest reason for this is that we currently use a clock source which is non monotonic which can result in 'interesting' data sets. (Includes export for get_monotonic_corse64 which Thomas Gleixner didn't mind in an earlier version.) - MAINTAINERS add the git tree to the list for IIO. New device support + a kind of indirect staging graduation. * Broadcom iproc-static-adc - new driver * mcp4531 - support for MCP454x, MCP456x, MCP464x and MCP466x potentiometers * mpu6050 - support the IC20608 6 axis motion tracking device * st-sensors - support the lis3l02dq + drop the lis3l02dq driver from staging. The general purpose driver is missing event support, but good to get rid of this driver which was rather long in the tooth. New driver features * ak8975 - Add vid regulator support and refactor handling in general. - Allow a delay after enabling regulators. - Runtime and system PM. * bmg160 - filter frequency control support. * bmp280 - SPI device support. - EOC interrupt support for the BMP085 - power management support. - supply regulator support. - reset gpio support - dt bindings for reset gpio and regulators. - of table to support device tree registration * max1363 - Device tree bindings. * mcp4531 - Device tree bindings. * st-pressure - temperature channels as part of triggered buffer (previously not due probably to alignment issues - see below). - lps22hb open drain interrupt support. - lps22hb temperature channel support Cleanups and reworkings. * numerous ADC drivers - ensure the iio_dev->dev.of_node is set to the parent dev.of_node so as to allow client bindings to find the device. * ak8975 - Fix incorrect handling of missing regulator - make sure power is down and remove. * bmp280 - read the calibration data only once as it doesn't change. * isl29125 - Use a few macros to make code a touch more readable. * mma8452 - fix a memory leak on error. - drop an unecessary bit of return value handling. * potentiometer kconfig - typo fix. * st-pressure - drop some uninformative default assignments of elements of the channel array structure (aids readability). * st-sensors - Harden interrupt handling considerably. These are actually all using level interrupts, but at least two known boards have them wired to edge only interrupt chips. Hence a slightly interesting bit of handling is needed in which we first allow for the easy option (level triggered) and secondly check the status registers before reenabling edge interrupts and fall back to a tight loop in the thread until we successfully clear the interrupt. No harm is done if we never succeed in doing so. It's an odd patch that has been through a lot of revisions to reach a consensus on how to handle what is basically broken hardware (which the previous defaults allowed to kind of work). - Fix alignment to defined storagebytes boundaries. - Ensure alignment of power of 2 byte boundaries. This has always in theory been part of the ABI of IIO, but we missed a few that snuck in that need fixing. The effect was minor as they were only followed by timestamp channels which were correctly aligned, - Add some docs to explain the gain calculations.
525 lines
13 KiB
C
525 lines
13 KiB
C
/*
|
|
* AD7266/65 SPI ADC driver
|
|
*
|
|
* Copyright 2012 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#include <linux/platform_data/ad7266.h>
|
|
|
|
struct ad7266_state {
|
|
struct spi_device *spi;
|
|
struct regulator *reg;
|
|
unsigned long vref_mv;
|
|
|
|
struct spi_transfer single_xfer[3];
|
|
struct spi_message single_msg;
|
|
|
|
enum ad7266_range range;
|
|
enum ad7266_mode mode;
|
|
bool fixed_addr;
|
|
struct gpio gpios[3];
|
|
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
* The buffer needs to be large enough to hold two samples (4 bytes) and
|
|
* the naturally aligned timestamp (8 bytes).
|
|
*/
|
|
struct {
|
|
__be16 sample[2];
|
|
s64 timestamp;
|
|
} data ____cacheline_aligned;
|
|
};
|
|
|
|
static int ad7266_wakeup(struct ad7266_state *st)
|
|
{
|
|
/* Any read with >= 2 bytes will wake the device */
|
|
return spi_read(st->spi, &st->data.sample[0], 2);
|
|
}
|
|
|
|
static int ad7266_powerdown(struct ad7266_state *st)
|
|
{
|
|
/* Any read with < 2 bytes will powerdown the device */
|
|
return spi_read(st->spi, &st->data.sample[0], 1);
|
|
}
|
|
|
|
static int ad7266_preenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7266_state *st = iio_priv(indio_dev);
|
|
return ad7266_wakeup(st);
|
|
}
|
|
|
|
static int ad7266_postdisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7266_state *st = iio_priv(indio_dev);
|
|
return ad7266_powerdown(st);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
|
|
.preenable = &ad7266_preenable,
|
|
.postenable = &iio_triggered_buffer_postenable,
|
|
.predisable = &iio_triggered_buffer_predisable,
|
|
.postdisable = &ad7266_postdisable,
|
|
};
|
|
|
|
static irqreturn_t ad7266_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct ad7266_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = spi_read(st->spi, st->data.sample, 4);
|
|
if (ret == 0) {
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &st->data,
|
|
pf->timestamp);
|
|
}
|
|
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void ad7266_select_input(struct ad7266_state *st, unsigned int nr)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (st->fixed_addr)
|
|
return;
|
|
|
|
switch (st->mode) {
|
|
case AD7266_MODE_SINGLE_ENDED:
|
|
nr >>= 1;
|
|
break;
|
|
case AD7266_MODE_PSEUDO_DIFF:
|
|
nr |= 1;
|
|
break;
|
|
case AD7266_MODE_DIFF:
|
|
nr &= ~1;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < 3; ++i)
|
|
gpio_set_value(st->gpios[i].gpio, (bool)(nr & BIT(i)));
|
|
}
|
|
|
|
static int ad7266_update_scan_mode(struct iio_dev *indio_dev,
|
|
const unsigned long *scan_mask)
|
|
{
|
|
struct ad7266_state *st = iio_priv(indio_dev);
|
|
unsigned int nr = find_first_bit(scan_mask, indio_dev->masklength);
|
|
|
|
ad7266_select_input(st, nr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7266_read_single(struct ad7266_state *st, int *val,
|
|
unsigned int address)
|
|
{
|
|
int ret;
|
|
|
|
ad7266_select_input(st, address);
|
|
|
|
ret = spi_sync(st->spi, &st->single_msg);
|
|
*val = be16_to_cpu(st->data.sample[address % 2]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7266_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val, int *val2, long m)
|
|
{
|
|
struct ad7266_state *st = iio_priv(indio_dev);
|
|
unsigned long scale_mv;
|
|
int ret;
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
ret = ad7266_read_single(st, val, chan->address);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
|
|
*val = (*val >> 2) & 0xfff;
|
|
if (chan->scan_type.sign == 's')
|
|
*val = sign_extend32(*val, 11);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
scale_mv = st->vref_mv;
|
|
if (st->mode == AD7266_MODE_DIFF)
|
|
scale_mv *= 2;
|
|
if (st->range == AD7266_RANGE_2VREF)
|
|
scale_mv *= 2;
|
|
|
|
*val = scale_mv;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
if (st->range == AD7266_RANGE_2VREF &&
|
|
st->mode != AD7266_MODE_DIFF)
|
|
*val = 2048;
|
|
else
|
|
*val = 0;
|
|
return IIO_VAL_INT;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
#define AD7266_CHAN(_chan, _sign) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = (_chan), \
|
|
.address = (_chan), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
|
|
| BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.scan_index = (_chan), \
|
|
.scan_type = { \
|
|
.sign = (_sign), \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 2, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
#define AD7266_DECLARE_SINGLE_ENDED_CHANNELS(_name, _sign) \
|
|
const struct iio_chan_spec ad7266_channels_##_name[] = { \
|
|
AD7266_CHAN(0, (_sign)), \
|
|
AD7266_CHAN(1, (_sign)), \
|
|
AD7266_CHAN(2, (_sign)), \
|
|
AD7266_CHAN(3, (_sign)), \
|
|
AD7266_CHAN(4, (_sign)), \
|
|
AD7266_CHAN(5, (_sign)), \
|
|
AD7266_CHAN(6, (_sign)), \
|
|
AD7266_CHAN(7, (_sign)), \
|
|
AD7266_CHAN(8, (_sign)), \
|
|
AD7266_CHAN(9, (_sign)), \
|
|
AD7266_CHAN(10, (_sign)), \
|
|
AD7266_CHAN(11, (_sign)), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(13), \
|
|
}
|
|
|
|
#define AD7266_DECLARE_SINGLE_ENDED_CHANNELS_FIXED(_name, _sign) \
|
|
const struct iio_chan_spec ad7266_channels_##_name##_fixed[] = { \
|
|
AD7266_CHAN(0, (_sign)), \
|
|
AD7266_CHAN(1, (_sign)), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(2), \
|
|
}
|
|
|
|
static AD7266_DECLARE_SINGLE_ENDED_CHANNELS(u, 'u');
|
|
static AD7266_DECLARE_SINGLE_ENDED_CHANNELS(s, 's');
|
|
static AD7266_DECLARE_SINGLE_ENDED_CHANNELS_FIXED(u, 'u');
|
|
static AD7266_DECLARE_SINGLE_ENDED_CHANNELS_FIXED(s, 's');
|
|
|
|
#define AD7266_CHAN_DIFF(_chan, _sign) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = (_chan) * 2, \
|
|
.channel2 = (_chan) * 2 + 1, \
|
|
.address = (_chan), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
|
|
| BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.scan_index = (_chan), \
|
|
.scan_type = { \
|
|
.sign = _sign, \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 2, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.differential = 1, \
|
|
}
|
|
|
|
#define AD7266_DECLARE_DIFF_CHANNELS(_name, _sign) \
|
|
const struct iio_chan_spec ad7266_channels_diff_##_name[] = { \
|
|
AD7266_CHAN_DIFF(0, (_sign)), \
|
|
AD7266_CHAN_DIFF(1, (_sign)), \
|
|
AD7266_CHAN_DIFF(2, (_sign)), \
|
|
AD7266_CHAN_DIFF(3, (_sign)), \
|
|
AD7266_CHAN_DIFF(4, (_sign)), \
|
|
AD7266_CHAN_DIFF(5, (_sign)), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(6), \
|
|
}
|
|
|
|
static AD7266_DECLARE_DIFF_CHANNELS(s, 's');
|
|
static AD7266_DECLARE_DIFF_CHANNELS(u, 'u');
|
|
|
|
#define AD7266_DECLARE_DIFF_CHANNELS_FIXED(_name, _sign) \
|
|
const struct iio_chan_spec ad7266_channels_diff_fixed_##_name[] = { \
|
|
AD7266_CHAN_DIFF(0, (_sign)), \
|
|
AD7266_CHAN_DIFF(1, (_sign)), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(2), \
|
|
}
|
|
|
|
static AD7266_DECLARE_DIFF_CHANNELS_FIXED(s, 's');
|
|
static AD7266_DECLARE_DIFF_CHANNELS_FIXED(u, 'u');
|
|
|
|
static const struct iio_info ad7266_info = {
|
|
.read_raw = &ad7266_read_raw,
|
|
.update_scan_mode = &ad7266_update_scan_mode,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static const unsigned long ad7266_available_scan_masks[] = {
|
|
0x003,
|
|
0x00c,
|
|
0x030,
|
|
0x0c0,
|
|
0x300,
|
|
0xc00,
|
|
0x000,
|
|
};
|
|
|
|
static const unsigned long ad7266_available_scan_masks_diff[] = {
|
|
0x003,
|
|
0x00c,
|
|
0x030,
|
|
0x000,
|
|
};
|
|
|
|
static const unsigned long ad7266_available_scan_masks_fixed[] = {
|
|
0x003,
|
|
0x000,
|
|
};
|
|
|
|
struct ad7266_chan_info {
|
|
const struct iio_chan_spec *channels;
|
|
unsigned int num_channels;
|
|
const unsigned long *scan_masks;
|
|
};
|
|
|
|
#define AD7266_CHAN_INFO_INDEX(_differential, _signed, _fixed) \
|
|
(((_differential) << 2) | ((_signed) << 1) | ((_fixed) << 0))
|
|
|
|
static const struct ad7266_chan_info ad7266_chan_infos[] = {
|
|
[AD7266_CHAN_INFO_INDEX(0, 0, 0)] = {
|
|
.channels = ad7266_channels_u,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_u),
|
|
.scan_masks = ad7266_available_scan_masks,
|
|
},
|
|
[AD7266_CHAN_INFO_INDEX(0, 0, 1)] = {
|
|
.channels = ad7266_channels_u_fixed,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_u_fixed),
|
|
.scan_masks = ad7266_available_scan_masks_fixed,
|
|
},
|
|
[AD7266_CHAN_INFO_INDEX(0, 1, 0)] = {
|
|
.channels = ad7266_channels_s,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_s),
|
|
.scan_masks = ad7266_available_scan_masks,
|
|
},
|
|
[AD7266_CHAN_INFO_INDEX(0, 1, 1)] = {
|
|
.channels = ad7266_channels_s_fixed,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_s_fixed),
|
|
.scan_masks = ad7266_available_scan_masks_fixed,
|
|
},
|
|
[AD7266_CHAN_INFO_INDEX(1, 0, 0)] = {
|
|
.channels = ad7266_channels_diff_u,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_diff_u),
|
|
.scan_masks = ad7266_available_scan_masks_diff,
|
|
},
|
|
[AD7266_CHAN_INFO_INDEX(1, 0, 1)] = {
|
|
.channels = ad7266_channels_diff_fixed_u,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_diff_fixed_u),
|
|
.scan_masks = ad7266_available_scan_masks_fixed,
|
|
},
|
|
[AD7266_CHAN_INFO_INDEX(1, 1, 0)] = {
|
|
.channels = ad7266_channels_diff_s,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_diff_s),
|
|
.scan_masks = ad7266_available_scan_masks_diff,
|
|
},
|
|
[AD7266_CHAN_INFO_INDEX(1, 1, 1)] = {
|
|
.channels = ad7266_channels_diff_fixed_s,
|
|
.num_channels = ARRAY_SIZE(ad7266_channels_diff_fixed_s),
|
|
.scan_masks = ad7266_available_scan_masks_fixed,
|
|
},
|
|
};
|
|
|
|
static void ad7266_init_channels(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7266_state *st = iio_priv(indio_dev);
|
|
bool is_differential, is_signed;
|
|
const struct ad7266_chan_info *chan_info;
|
|
int i;
|
|
|
|
is_differential = st->mode != AD7266_MODE_SINGLE_ENDED;
|
|
is_signed = (st->range == AD7266_RANGE_2VREF) |
|
|
(st->mode == AD7266_MODE_DIFF);
|
|
|
|
i = AD7266_CHAN_INFO_INDEX(is_differential, is_signed, st->fixed_addr);
|
|
chan_info = &ad7266_chan_infos[i];
|
|
|
|
indio_dev->channels = chan_info->channels;
|
|
indio_dev->num_channels = chan_info->num_channels;
|
|
indio_dev->available_scan_masks = chan_info->scan_masks;
|
|
indio_dev->masklength = chan_info->num_channels - 1;
|
|
}
|
|
|
|
static const char * const ad7266_gpio_labels[] = {
|
|
"AD0", "AD1", "AD2",
|
|
};
|
|
|
|
static int ad7266_probe(struct spi_device *spi)
|
|
{
|
|
struct ad7266_platform_data *pdata = spi->dev.platform_data;
|
|
struct iio_dev *indio_dev;
|
|
struct ad7266_state *st;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->reg = devm_regulator_get_optional(&spi->dev, "vref");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_get_voltage(st->reg);
|
|
if (ret < 0)
|
|
goto error_disable_reg;
|
|
|
|
st->vref_mv = ret / 1000;
|
|
} else {
|
|
/* Any other error indicates that the regulator does exist */
|
|
if (PTR_ERR(st->reg) != -ENODEV)
|
|
return PTR_ERR(st->reg);
|
|
/* Use internal reference */
|
|
st->vref_mv = 2500;
|
|
}
|
|
|
|
if (pdata) {
|
|
st->fixed_addr = pdata->fixed_addr;
|
|
st->mode = pdata->mode;
|
|
st->range = pdata->range;
|
|
|
|
if (!st->fixed_addr) {
|
|
for (i = 0; i < ARRAY_SIZE(st->gpios); ++i) {
|
|
st->gpios[i].gpio = pdata->addr_gpios[i];
|
|
st->gpios[i].flags = GPIOF_OUT_INIT_LOW;
|
|
st->gpios[i].label = ad7266_gpio_labels[i];
|
|
}
|
|
ret = gpio_request_array(st->gpios,
|
|
ARRAY_SIZE(st->gpios));
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
}
|
|
} else {
|
|
st->fixed_addr = true;
|
|
st->range = AD7266_RANGE_VREF;
|
|
st->mode = AD7266_MODE_DIFF;
|
|
}
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
st->spi = spi;
|
|
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->dev.of_node = spi->dev.of_node;
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &ad7266_info;
|
|
|
|
ad7266_init_channels(indio_dev);
|
|
|
|
/* wakeup */
|
|
st->single_xfer[0].rx_buf = &st->data.sample[0];
|
|
st->single_xfer[0].len = 2;
|
|
st->single_xfer[0].cs_change = 1;
|
|
/* conversion */
|
|
st->single_xfer[1].rx_buf = st->data.sample;
|
|
st->single_xfer[1].len = 4;
|
|
st->single_xfer[1].cs_change = 1;
|
|
/* powerdown */
|
|
st->single_xfer[2].tx_buf = &st->data.sample[0];
|
|
st->single_xfer[2].len = 1;
|
|
|
|
spi_message_init(&st->single_msg);
|
|
spi_message_add_tail(&st->single_xfer[0], &st->single_msg);
|
|
spi_message_add_tail(&st->single_xfer[1], &st->single_msg);
|
|
spi_message_add_tail(&st->single_xfer[2], &st->single_msg);
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
|
|
&ad7266_trigger_handler, &iio_triggered_buffer_setup_ops);
|
|
if (ret)
|
|
goto error_free_gpios;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_buffer_cleanup;
|
|
|
|
return 0;
|
|
|
|
error_buffer_cleanup:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
error_free_gpios:
|
|
if (!st->fixed_addr)
|
|
gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
|
|
error_disable_reg:
|
|
if (!IS_ERR_OR_NULL(st->reg))
|
|
regulator_disable(st->reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7266_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad7266_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
if (!st->fixed_addr)
|
|
gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
|
|
if (!IS_ERR_OR_NULL(st->reg))
|
|
regulator_disable(st->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ad7266_id[] = {
|
|
{"ad7265", 0},
|
|
{"ad7266", 0},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad7266_id);
|
|
|
|
static struct spi_driver ad7266_driver = {
|
|
.driver = {
|
|
.name = "ad7266",
|
|
},
|
|
.probe = ad7266_probe,
|
|
.remove = ad7266_remove,
|
|
.id_table = ad7266_id,
|
|
};
|
|
module_spi_driver(ad7266_driver);
|
|
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7266/65 ADC");
|
|
MODULE_LICENSE("GPL v2");
|