forked from Minki/linux
4c9f9fb29b
Currently AMPDU aggregation is preferred over AMSDU. AMSDU aggregation is performed only if AMPDU streams in firmware are full. This patch adds simultaneous AMSDU and AMPDU aggregation support. This mechanism helps to improve throughput. AMSDU is enabled only for 8897 chipsets which supports 4K transmit buffer. User can disable AMSDU using 'disable_tx_amsdu' module parameter. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
243 lines
7.5 KiB
C
243 lines
7.5 KiB
C
/*
|
|
* Marvell Wireless LAN device driver: station RX data handling
|
|
*
|
|
* Copyright (C) 2011, Marvell International Ltd.
|
|
*
|
|
* This software file (the "File") is distributed by Marvell International
|
|
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
|
|
* (the "License"). You may use, redistribute and/or modify this File in
|
|
* accordance with the terms and conditions of the License, a copy of which
|
|
* is available by writing to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
|
|
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
|
|
*
|
|
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
|
|
* this warranty disclaimer.
|
|
*/
|
|
|
|
#include <uapi/linux/ipv6.h>
|
|
#include <net/ndisc.h>
|
|
#include "decl.h"
|
|
#include "ioctl.h"
|
|
#include "util.h"
|
|
#include "fw.h"
|
|
#include "main.h"
|
|
#include "11n_aggr.h"
|
|
#include "11n_rxreorder.h"
|
|
|
|
/* This function checks if a frame is IPv4 ARP or IPv6 Neighbour advertisement
|
|
* frame. If frame has both source and destination mac address as same, this
|
|
* function drops such gratuitous frames.
|
|
*/
|
|
static bool
|
|
mwifiex_discard_gratuitous_arp(struct mwifiex_private *priv,
|
|
struct sk_buff *skb)
|
|
{
|
|
const struct mwifiex_arp_eth_header *arp;
|
|
struct ethhdr *eth;
|
|
struct ipv6hdr *ipv6;
|
|
struct icmp6hdr *icmpv6;
|
|
|
|
eth = (struct ethhdr *)skb->data;
|
|
switch (ntohs(eth->h_proto)) {
|
|
case ETH_P_ARP:
|
|
arp = (void *)(skb->data + sizeof(struct ethhdr));
|
|
if (arp->hdr.ar_op == htons(ARPOP_REPLY) ||
|
|
arp->hdr.ar_op == htons(ARPOP_REQUEST)) {
|
|
if (!memcmp(arp->ar_sip, arp->ar_tip, 4))
|
|
return true;
|
|
}
|
|
break;
|
|
case ETH_P_IPV6:
|
|
ipv6 = (void *)(skb->data + sizeof(struct ethhdr));
|
|
icmpv6 = (void *)(skb->data + sizeof(struct ethhdr) +
|
|
sizeof(struct ipv6hdr));
|
|
if (NDISC_NEIGHBOUR_ADVERTISEMENT == icmpv6->icmp6_type) {
|
|
if (!memcmp(&ipv6->saddr, &ipv6->daddr,
|
|
sizeof(struct in6_addr)))
|
|
return true;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* This function processes the received packet and forwards it
|
|
* to kernel/upper layer.
|
|
*
|
|
* This function parses through the received packet and determines
|
|
* if it is a debug packet or normal packet.
|
|
*
|
|
* For non-debug packets, the function chops off unnecessary leading
|
|
* header bytes, reconstructs the packet as an ethernet frame or
|
|
* 802.2/llc/snap frame as required, and sends it to kernel/upper layer.
|
|
*
|
|
* The completion callback is called after processing in complete.
|
|
*/
|
|
int mwifiex_process_rx_packet(struct mwifiex_private *priv,
|
|
struct sk_buff *skb)
|
|
{
|
|
int ret;
|
|
struct rx_packet_hdr *rx_pkt_hdr;
|
|
struct rxpd *local_rx_pd;
|
|
int hdr_chop;
|
|
struct ethhdr *eth;
|
|
u16 rx_pkt_off, rx_pkt_len;
|
|
u8 *offset;
|
|
|
|
local_rx_pd = (struct rxpd *) (skb->data);
|
|
|
|
rx_pkt_off = le16_to_cpu(local_rx_pd->rx_pkt_offset);
|
|
rx_pkt_len = le16_to_cpu(local_rx_pd->rx_pkt_length);
|
|
rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_off;
|
|
|
|
if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
|
|
sizeof(bridge_tunnel_header))) ||
|
|
(!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
|
|
sizeof(rfc1042_header)) &&
|
|
ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_AARP &&
|
|
ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_IPX)) {
|
|
/*
|
|
* Replace the 803 header and rfc1042 header (llc/snap) with an
|
|
* EthernetII header, keep the src/dst and snap_type
|
|
* (ethertype).
|
|
* The firmware only passes up SNAP frames converting
|
|
* all RX Data from 802.11 to 802.2/LLC/SNAP frames.
|
|
* To create the Ethernet II, just move the src, dst address
|
|
* right before the snap_type.
|
|
*/
|
|
eth = (struct ethhdr *)
|
|
((u8 *) &rx_pkt_hdr->eth803_hdr
|
|
+ sizeof(rx_pkt_hdr->eth803_hdr) +
|
|
sizeof(rx_pkt_hdr->rfc1042_hdr)
|
|
- sizeof(rx_pkt_hdr->eth803_hdr.h_dest)
|
|
- sizeof(rx_pkt_hdr->eth803_hdr.h_source)
|
|
- sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type));
|
|
|
|
memcpy(eth->h_source, rx_pkt_hdr->eth803_hdr.h_source,
|
|
sizeof(eth->h_source));
|
|
memcpy(eth->h_dest, rx_pkt_hdr->eth803_hdr.h_dest,
|
|
sizeof(eth->h_dest));
|
|
|
|
/* Chop off the rxpd + the excess memory from the 802.2/llc/snap
|
|
header that was removed. */
|
|
hdr_chop = (u8 *) eth - (u8 *) local_rx_pd;
|
|
} else {
|
|
/* Chop off the rxpd */
|
|
hdr_chop = (u8 *) &rx_pkt_hdr->eth803_hdr -
|
|
(u8 *) local_rx_pd;
|
|
}
|
|
|
|
/* Chop off the leading header bytes so the it points to the start of
|
|
either the reconstructed EthII frame or the 802.2/llc/snap frame */
|
|
skb_pull(skb, hdr_chop);
|
|
|
|
if (priv->hs2_enabled &&
|
|
mwifiex_discard_gratuitous_arp(priv, skb)) {
|
|
dev_dbg(priv->adapter->dev, "Bypassed Gratuitous ARP\n");
|
|
dev_kfree_skb_any(skb);
|
|
return 0;
|
|
}
|
|
|
|
if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
|
|
ntohs(rx_pkt_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {
|
|
offset = (u8 *)local_rx_pd + rx_pkt_off;
|
|
mwifiex_process_tdls_action_frame(priv, offset, rx_pkt_len);
|
|
}
|
|
|
|
priv->rxpd_rate = local_rx_pd->rx_rate;
|
|
|
|
priv->rxpd_htinfo = local_rx_pd->ht_info;
|
|
|
|
ret = mwifiex_recv_packet(priv, skb);
|
|
if (ret == -1)
|
|
dev_err(priv->adapter->dev, "recv packet failed\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function processes the received buffer.
|
|
*
|
|
* The function looks into the RxPD and performs sanity tests on the
|
|
* received buffer to ensure its a valid packet, before processing it
|
|
* further. If the packet is determined to be aggregated, it is
|
|
* de-aggregated accordingly. Non-unicast packets are sent directly to
|
|
* the kernel/upper layers. Unicast packets are handed over to the
|
|
* Rx reordering routine if 11n is enabled.
|
|
*
|
|
* The completion callback is called after processing in complete.
|
|
*/
|
|
int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct mwifiex_adapter *adapter = priv->adapter;
|
|
int ret = 0;
|
|
struct rxpd *local_rx_pd;
|
|
struct rx_packet_hdr *rx_pkt_hdr;
|
|
u8 ta[ETH_ALEN];
|
|
u16 rx_pkt_type, rx_pkt_offset, rx_pkt_length, seq_num;
|
|
|
|
local_rx_pd = (struct rxpd *) (skb->data);
|
|
rx_pkt_type = le16_to_cpu(local_rx_pd->rx_pkt_type);
|
|
rx_pkt_offset = le16_to_cpu(local_rx_pd->rx_pkt_offset);
|
|
rx_pkt_length = le16_to_cpu(local_rx_pd->rx_pkt_length);
|
|
seq_num = le16_to_cpu(local_rx_pd->seq_num);
|
|
|
|
rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_offset;
|
|
|
|
if ((rx_pkt_offset + rx_pkt_length) > (u16) skb->len) {
|
|
dev_err(adapter->dev,
|
|
"wrong rx packet: len=%d, rx_pkt_offset=%d, rx_pkt_length=%d\n",
|
|
skb->len, rx_pkt_offset, rx_pkt_length);
|
|
priv->stats.rx_dropped++;
|
|
dev_kfree_skb_any(skb);
|
|
return ret;
|
|
}
|
|
|
|
if (rx_pkt_type == PKT_TYPE_MGMT) {
|
|
ret = mwifiex_process_mgmt_packet(priv, skb);
|
|
if (ret)
|
|
dev_err(adapter->dev, "Rx of mgmt packet failed");
|
|
dev_kfree_skb_any(skb);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* If the packet is not an unicast packet then send the packet
|
|
* directly to os. Don't pass thru rx reordering
|
|
*/
|
|
if (!IS_11N_ENABLED(priv) ||
|
|
!ether_addr_equal_unaligned(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest)) {
|
|
mwifiex_process_rx_packet(priv, skb);
|
|
return ret;
|
|
}
|
|
|
|
if (mwifiex_queuing_ra_based(priv)) {
|
|
memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN);
|
|
} else {
|
|
if (rx_pkt_type != PKT_TYPE_BAR)
|
|
priv->rx_seq[local_rx_pd->priority] = seq_num;
|
|
memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address,
|
|
ETH_ALEN);
|
|
}
|
|
|
|
/* Reorder and send to OS */
|
|
ret = mwifiex_11n_rx_reorder_pkt(priv, seq_num, local_rx_pd->priority,
|
|
ta, (u8) rx_pkt_type, skb);
|
|
|
|
if (ret || (rx_pkt_type == PKT_TYPE_BAR))
|
|
dev_kfree_skb_any(skb);
|
|
|
|
if (ret)
|
|
priv->stats.rx_dropped++;
|
|
|
|
return ret;
|
|
}
|