forked from Minki/linux
4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
161 lines
2.5 KiB
Plaintext
161 lines
2.5 KiB
Plaintext
* Clock bindings for Freescale i.MX25
|
|
|
|
Required properties:
|
|
- compatible: Should be "fsl,imx25-ccm"
|
|
- reg: Address and length of the register set
|
|
- interrupts: Should contain CCM interrupt
|
|
- #clock-cells: Should be <1>
|
|
|
|
The clock consumer should specify the desired clock by having the clock
|
|
ID in its "clocks" phandle cell. The following is a full list of i.MX25
|
|
clocks and IDs.
|
|
|
|
Clock ID
|
|
---------------------------
|
|
dummy 0
|
|
osc 1
|
|
mpll 2
|
|
upll 3
|
|
mpll_cpu_3_4 4
|
|
cpu_sel 5
|
|
cpu 6
|
|
ahb 7
|
|
usb_div 8
|
|
ipg 9
|
|
per0_sel 10
|
|
per1_sel 11
|
|
per2_sel 12
|
|
per3_sel 13
|
|
per4_sel 14
|
|
per5_sel 15
|
|
per6_sel 16
|
|
per7_sel 17
|
|
per8_sel 18
|
|
per9_sel 19
|
|
per10_sel 20
|
|
per11_sel 21
|
|
per12_sel 22
|
|
per13_sel 23
|
|
per14_sel 24
|
|
per15_sel 25
|
|
per0 26
|
|
per1 27
|
|
per2 28
|
|
per3 29
|
|
per4 30
|
|
per5 31
|
|
per6 32
|
|
per7 33
|
|
per8 34
|
|
per9 35
|
|
per10 36
|
|
per11 37
|
|
per12 38
|
|
per13 39
|
|
per14 40
|
|
per15 41
|
|
csi_ipg_per 42
|
|
epit_ipg_per 43
|
|
esai_ipg_per 44
|
|
esdhc1_ipg_per 45
|
|
esdhc2_ipg_per 46
|
|
gpt_ipg_per 47
|
|
i2c_ipg_per 48
|
|
lcdc_ipg_per 49
|
|
nfc_ipg_per 50
|
|
owire_ipg_per 51
|
|
pwm_ipg_per 52
|
|
sim1_ipg_per 53
|
|
sim2_ipg_per 54
|
|
ssi1_ipg_per 55
|
|
ssi2_ipg_per 56
|
|
uart_ipg_per 57
|
|
ata_ahb 58
|
|
reserved 59
|
|
csi_ahb 60
|
|
emi_ahb 61
|
|
esai_ahb 62
|
|
esdhc1_ahb 63
|
|
esdhc2_ahb 64
|
|
fec_ahb 65
|
|
lcdc_ahb 66
|
|
rtic_ahb 67
|
|
sdma_ahb 68
|
|
slcdc_ahb 69
|
|
usbotg_ahb 70
|
|
reserved 71
|
|
reserved 72
|
|
reserved 73
|
|
reserved 74
|
|
can1_ipg 75
|
|
can2_ipg 76
|
|
csi_ipg 77
|
|
cspi1_ipg 78
|
|
cspi2_ipg 79
|
|
cspi3_ipg 80
|
|
dryice_ipg 81
|
|
ect_ipg 82
|
|
epit1_ipg 83
|
|
epit2_ipg 84
|
|
reserved 85
|
|
esdhc1_ipg 86
|
|
esdhc2_ipg 87
|
|
fec_ipg 88
|
|
reserved 89
|
|
reserved 90
|
|
reserved 91
|
|
gpt1_ipg 92
|
|
gpt2_ipg 93
|
|
gpt3_ipg 94
|
|
gpt4_ipg 95
|
|
reserved 96
|
|
reserved 97
|
|
reserved 98
|
|
iim_ipg 99
|
|
reserved 100
|
|
reserved 101
|
|
kpp_ipg 102
|
|
lcdc_ipg 103
|
|
reserved 104
|
|
pwm1_ipg 105
|
|
pwm2_ipg 106
|
|
pwm3_ipg 107
|
|
pwm4_ipg 108
|
|
rngb_ipg 109
|
|
reserved 110
|
|
scc_ipg 111
|
|
sdma_ipg 112
|
|
sim1_ipg 113
|
|
sim2_ipg 114
|
|
slcdc_ipg 115
|
|
spba_ipg 116
|
|
ssi1_ipg 117
|
|
ssi2_ipg 118
|
|
tsc_ipg 119
|
|
uart1_ipg 120
|
|
uart2_ipg 121
|
|
uart3_ipg 122
|
|
uart4_ipg 123
|
|
uart5_ipg 124
|
|
reserved 125
|
|
wdt_ipg 126
|
|
cko_div 127
|
|
cko_sel 128
|
|
cko 129
|
|
|
|
Examples:
|
|
|
|
clks: ccm@53f80000 {
|
|
compatible = "fsl,imx25-ccm";
|
|
reg = <0x53f80000 0x4000>;
|
|
interrupts = <31>;
|
|
};
|
|
|
|
uart1: serial@43f90000 {
|
|
compatible = "fsl,imx25-uart", "fsl,imx21-uart";
|
|
reg = <0x43f90000 0x4000>;
|
|
interrupts = <45>;
|
|
clocks = <&clks 79>, <&clks 50>;
|
|
clock-names = "ipg", "per";
|
|
};
|