forked from Minki/linux
5edc2aae16
Replace the non-standard vendor prefix stm and st-micro with st for STMicroelectronics. The drivers do not specify the vendor prefixes since the I2C Core strips them away from the DT provided compatible string. Therefore, changing existing device trees does not have any impact on device detection. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org>
697 lines
16 KiB
Plaintext
697 lines
16 KiB
Plaintext
/*
|
|
* Copyright (C) 2008 Extreme Engineering Solutions, Inc.
|
|
* Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
|
|
*
|
|
* XCalibur1501 6U CompactPCI single-board computer based on MPC8572E
|
|
*
|
|
* This is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/ {
|
|
model = "xes,xcalibur1501";
|
|
compatible = "xes,xcalibur1501", "xes,MPC8572";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
ethernet2 = &enet2;
|
|
ethernet3 = &enet3;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci2 = &pci2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8572@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
d-cache-size = <0x8000>; // L1, 32K
|
|
i-cache-size = <0x8000>; // L1, 32K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
PowerPC,8572@1 {
|
|
device_type = "cpu";
|
|
reg = <0x1>;
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
d-cache-size = <0x8000>; // L1, 32K
|
|
i-cache-size = <0x8000>; // L1, 32K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot
|
|
};
|
|
|
|
localbus@ef005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0 0xef005000 0 0x1000>;
|
|
interrupts = <19 2>;
|
|
interrupt-parent = <&mpic>;
|
|
/* Local bus region mappings */
|
|
ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Flash 1 */
|
|
1 0 0 0xf0000000 0x8000000 /* CS1: Flash 2 */
|
|
2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */
|
|
3 0 0 0xef840000 0x40000 /* CS3: NAND CE2 */
|
|
4 0 0 0xe9000000 0x100000>; /* CS4: USB */
|
|
|
|
nor-boot@0,0 {
|
|
compatible = "amd,s29gl01gp", "cfi-flash";
|
|
bank-width = <2>;
|
|
reg = <0 0 0x8000000>; /* 128MB */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "Primary user space";
|
|
reg = <0x00000000 0x6f00000>; /* 111 MB */
|
|
};
|
|
partition@6f00000 {
|
|
label = "Primary kernel";
|
|
reg = <0x6f00000 0x1000000>; /* 16 MB */
|
|
};
|
|
partition@7f00000 {
|
|
label = "Primary DTB";
|
|
reg = <0x7f00000 0x40000>; /* 256 KB */
|
|
};
|
|
partition@7f40000 {
|
|
label = "Primary U-Boot environment";
|
|
reg = <0x7f40000 0x40000>; /* 256 KB */
|
|
};
|
|
partition@7f80000 {
|
|
label = "Primary U-Boot";
|
|
reg = <0x7f80000 0x80000>; /* 512 KB */
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
nor-alternate@1,0 {
|
|
compatible = "amd,s29gl01gp", "cfi-flash";
|
|
bank-width = <2>;
|
|
//reg = <0xf0000000 0x08000000>; /* 128MB */
|
|
reg = <1 0 0x8000000>; /* 128MB */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "Secondary user space";
|
|
reg = <0x00000000 0x6f00000>; /* 111 MB */
|
|
};
|
|
partition@6f00000 {
|
|
label = "Secondary kernel";
|
|
reg = <0x6f00000 0x1000000>; /* 16 MB */
|
|
};
|
|
partition@7f00000 {
|
|
label = "Secondary DTB";
|
|
reg = <0x7f00000 0x40000>; /* 256 KB */
|
|
};
|
|
partition@7f40000 {
|
|
label = "Secondary U-Boot environment";
|
|
reg = <0x7f40000 0x40000>; /* 256 KB */
|
|
};
|
|
partition@7f80000 {
|
|
label = "Secondary U-Boot";
|
|
reg = <0x7f80000 0x80000>; /* 512 KB */
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
nand@2,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* Actual part could be ST Micro NAND08GW3B2A (1 GB),
|
|
* Micron MT29F8G08DAA (2x 512 MB), or Micron
|
|
* MT29F16G08FAA (2x 1 GB), depending on the build
|
|
* configuration
|
|
*/
|
|
compatible = "fsl,mpc8572-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <2 0 0x40000>;
|
|
/* U-Boot should fix this up if chip size > 1 GB */
|
|
partition@0 {
|
|
label = "NAND Filesystem";
|
|
reg = <0 0x40000000>;
|
|
};
|
|
};
|
|
|
|
usb@4,0 {
|
|
compatible = "nxp,usb-isp1761";
|
|
reg = <4 0 0x100000>;
|
|
bus-width = <32>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <10 1>;
|
|
};
|
|
};
|
|
|
|
soc8572@ef000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "fsl,mpc8572-immr", "simple-bus";
|
|
ranges = <0x0 0 0xef000000 0x100000>;
|
|
bus-frequency = <0>; // Filled out by uboot.
|
|
|
|
ecm-law@0 {
|
|
compatible = "fsl,ecm-law";
|
|
reg = <0x0 0x1000>;
|
|
fsl,num-laws = <12>;
|
|
};
|
|
|
|
ecm@1000 {
|
|
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <17 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,mpc8572-memory-controller";
|
|
reg = <0x2000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <18 2>;
|
|
};
|
|
|
|
memory-controller@6000 {
|
|
compatible = "fsl,mpc8572-memory-controller";
|
|
reg = <0x6000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <18 2>;
|
|
};
|
|
|
|
L2: l2-cache-controller@20000 {
|
|
compatible = "fsl,mpc8572-l2-cache-controller";
|
|
reg = <0x20000 0x1000>;
|
|
cache-line-size = <32>; // 32 bytes
|
|
cache-size = <0x100000>; // L2, 1M
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
|
|
temp-sensor@48 {
|
|
compatible = "dallas,ds1631", "dallas,ds1621";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
temp-sensor@4c {
|
|
compatible = "adi,adt7461";
|
|
reg = <0x4c>;
|
|
};
|
|
|
|
cpu-supervisor@51 {
|
|
compatible = "dallas,ds4510";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
eeprom@54 {
|
|
compatible = "atmel,at24c128b";
|
|
reg = <0x54>;
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "st,m41t00",
|
|
"dallas,ds1338";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
pcie-switch@6a {
|
|
compatible = "plx,pex8648";
|
|
reg = <0x6a>;
|
|
};
|
|
|
|
/* On-board signals for VID, flash, serial */
|
|
gpio1: gpio@18 {
|
|
compatible = "nxp,pca9557";
|
|
reg = <0x18>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
polarity = <0x00>;
|
|
};
|
|
|
|
/* PMC0/XMC0 signals */
|
|
gpio2: gpio@1c {
|
|
compatible = "nxp,pca9557";
|
|
reg = <0x1c>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
polarity = <0x00>;
|
|
};
|
|
|
|
/* PMC1/XMC1 signals */
|
|
gpio3: gpio@1d {
|
|
compatible = "nxp,pca9557";
|
|
reg = <0x1d>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
polarity = <0x00>;
|
|
};
|
|
|
|
/* CompactPCI signals (sysen, GA[4:0]) */
|
|
gpio4: gpio@1e {
|
|
compatible = "nxp,pca9557";
|
|
reg = <0x1e>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
polarity = <0x00>;
|
|
};
|
|
|
|
/* CompactPCI J5 GPIO and FAL/DEG/PRST */
|
|
gpio5: gpio@1f {
|
|
compatible = "nxp,pca9557";
|
|
reg = <0x1f>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
polarity = <0x00>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
dma@c300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
|
|
reg = <0xc300 0x4>;
|
|
ranges = <0x0 0xc100 0x200>;
|
|
cell-index = <1>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <76 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <77 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <78 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <79 2>;
|
|
};
|
|
};
|
|
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
|
|
reg = <0x21300 0x4>;
|
|
ranges = <0x0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8572-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
/* eTSEC 1 front panel 0 */
|
|
enet0: ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <29 2 30 2 34 2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "sgmii";
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x520 0x20>;
|
|
|
|
phy0: ethernet-phy@1 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <4 1>;
|
|
reg = <0x1>;
|
|
};
|
|
phy1: ethernet-phy@2 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <4 1>;
|
|
reg = <0x2>;
|
|
};
|
|
phy2: ethernet-phy@3 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <5 1>;
|
|
reg = <0x3>;
|
|
};
|
|
phy3: ethernet-phy@4 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <5 1>;
|
|
reg = <0x4>;
|
|
};
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
/* eTSEC 2 front panel 1 */
|
|
enet1: ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x25000 0x1000>;
|
|
ranges = <0x0 0x25000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <35 2 36 2 40 2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "sgmii";
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
/* eTSEC 3 PICMG2.16 backplane port 0 */
|
|
enet2: ethernet@26000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <2>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x26000 0x1000>;
|
|
ranges = <0x0 0x26000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <31 2 32 2 33 2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi2>;
|
|
phy-handle = <&phy2>;
|
|
phy-connection-type = "sgmii";
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
|
|
tbi2: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
/* eTSEC 4 PICMG2.16 backplane port 1 */
|
|
enet3: ethernet@27000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <3>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x27000 0x1000>;
|
|
ranges = <0x0 0x27000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <37 2 38 2 39 2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi3>;
|
|
phy-handle = <&phy3>;
|
|
phy-connection-type = "sgmii";
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
|
|
tbi3: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
/* UART0 */
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
/* UART1 */
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
global-utilities@e0000 { //global utilities block
|
|
compatible = "fsl,mpc8572-guts";
|
|
reg = <0xe0000 0x1000>;
|
|
fsl,has-rstcr;
|
|
};
|
|
|
|
msi@41600 {
|
|
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
|
|
reg = <0x41600 0x80>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xe0 0
|
|
0xe1 0
|
|
0xe2 0
|
|
0xe3 0
|
|
0xe4 0
|
|
0xe5 0
|
|
0xe6 0
|
|
0xe7 0>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
|
|
"fsl,sec2.1", "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <45 2 58 2>;
|
|
interrupt-parent = <&mpic>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0x9fe>;
|
|
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
};
|
|
|
|
gpio0: gpio@f000 {
|
|
compatible = "fsl,mpc8572-gpio";
|
|
reg = <0xf000 0x1000>;
|
|
interrupts = <47 2>;
|
|
interrupt-parent = <&mpic>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
heartbeat {
|
|
label = "Heartbeat";
|
|
gpios = <&gpio0 4 1>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
yellow {
|
|
label = "Yellow";
|
|
gpios = <&gpio0 5 1>;
|
|
};
|
|
|
|
red {
|
|
label = "Red";
|
|
gpios = <&gpio0 6 1>;
|
|
};
|
|
|
|
green {
|
|
label = "Green";
|
|
gpios = <&gpio0 7 1>;
|
|
};
|
|
};
|
|
|
|
/* PME (pattern-matcher) */
|
|
pme@10000 {
|
|
compatible = "fsl,mpc8572-pme", "pme8572";
|
|
reg = <0x10000 0x5000>;
|
|
interrupts = <57 2 64 2 65 2 66 2 67 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
tlu@2f000 {
|
|
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
|
|
reg = <0x2f000 0x1000>;
|
|
interrupts = <61 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
tlu@15000 {
|
|
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
|
|
reg = <0x15000 0x1000>;
|
|
interrupts = <75 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* PCI Express controller 3 @ ef008000 is not used.
|
|
* This would have been pci0 on other mpc85xx platforms.
|
|
*
|
|
* PCI Express controller 2 @ ef009000 is not used.
|
|
* This would have been pci1 on other mpc85xx platforms.
|
|
*/
|
|
|
|
/* PCI Express controller 1, wired to PEX8648 PCIe switch */
|
|
pci2: pcie@ef00a000 {
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0 0xef00a000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
|
|
0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <26 2>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0x0 0x0 0x0 0x1 &mpic 0x0 0x1
|
|
0x0 0x0 0x0 0x2 &mpic 0x1 0x1
|
|
0x0 0x0 0x0 0x3 &mpic 0x2 0x1
|
|
0x0 0x0 0x0 0x4 &mpic 0x3 0x1
|
|
>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0x80000000
|
|
0x2000000 0x0 0x80000000
|
|
0x0 0x40000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
};
|