forked from Minki/linux
a0ae024050
When booting through a device tree, the kernel cpu logical id map can be initialized using device tree data passed by FW or through an embedded blob. This patch adds a function that parses device tree "cpu" nodes and retrieves the corresponding CPUs hardware identifiers (MPIDR). It sets the possible cpus and the cpu logical map values according to the number of CPUs defined in the device tree and respective properties. The device tree HW identifiers are considered valid if all CPU nodes contain a "reg" property, there are no duplicate "reg" entries and the DT defines a CPU node whose "reg" property matches the MPIDR[23:0] of the boot CPU. The primary CPU is assigned cpu logical number 0 to keep the current convention valid. Current bindings documentation is included in the patch: Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
78 lines
1.5 KiB
Plaintext
78 lines
1.5 KiB
Plaintext
* ARM CPUs binding description
|
|
|
|
The device tree allows to describe the layout of CPUs in a system through
|
|
the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
|
|
defining properties for every cpu.
|
|
|
|
Bindings for CPU nodes follow the ePAPR standard, available from:
|
|
|
|
http://devicetree.org
|
|
|
|
For the ARM architecture every CPU node must contain the following properties:
|
|
|
|
- device_type: must be "cpu"
|
|
- reg: property matching the CPU MPIDR[23:0] register bits
|
|
reg[31:24] bits must be set to 0
|
|
- compatible: should be one of:
|
|
"arm,arm1020"
|
|
"arm,arm1020e"
|
|
"arm,arm1022"
|
|
"arm,arm1026"
|
|
"arm,arm720"
|
|
"arm,arm740"
|
|
"arm,arm7tdmi"
|
|
"arm,arm920"
|
|
"arm,arm922"
|
|
"arm,arm925"
|
|
"arm,arm926"
|
|
"arm,arm940"
|
|
"arm,arm946"
|
|
"arm,arm9tdmi"
|
|
"arm,cortex-a5"
|
|
"arm,cortex-a7"
|
|
"arm,cortex-a8"
|
|
"arm,cortex-a9"
|
|
"arm,cortex-a15"
|
|
"arm,arm1136"
|
|
"arm,arm1156"
|
|
"arm,arm1176"
|
|
"arm,arm11mpcore"
|
|
"faraday,fa526"
|
|
"intel,sa110"
|
|
"intel,sa1100"
|
|
"marvell,feroceon"
|
|
"marvell,mohawk"
|
|
"marvell,xsc3"
|
|
"marvell,xscale"
|
|
|
|
Example:
|
|
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x0>;
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x1>;
|
|
};
|
|
|
|
CPU2: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x100>;
|
|
};
|
|
|
|
CPU3: cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x101>;
|
|
};
|
|
};
|