linux/drivers/net/phy
Hubert Chaumette 6a1197457f net/phy: micrel: fix bugged test on device tree loading for ksz9021
In ksz9021_load_values_from_of() val2 to val4 aren't tested against their
initialization value.
This causes the test to always succeed, and this value to be used as if it
was loaded from the devicetree instead of being ignored, in case of a
missing/invalid property in the ethernet OF device node.
As a result, the value "0" is written to the relevant registers.

Change the conditions to test against the right initialization value.

Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 14:58:58 -04:00
..
amd.c phylib: Support registering a bunch of drivers 2012-07-09 00:10:56 -07:00
at803x.c phy/at8031: enable at8031 to work on interrupt mode 2014-03-29 18:20:30 -04:00
bcm7xxx.c net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER 2014-03-26 16:19:24 -04:00
bcm63xx.c phy: bcm63xx: report Broadcom BCM63xx PHYs as internal 2013-05-27 22:42:50 -07:00
bcm87xx.c net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver 2012-09-22 15:33:46 -04:00
broadcom.c net: phy: broadcom: extract register definitions 2014-02-14 00:27:58 -05:00
cicada.c net: phy: cicada: fix checkpath errors 2013-12-18 00:49:01 -05:00
davicom.c net: phy: davicom: fix checkpath errors 2013-12-18 00:49:01 -05:00
dp83640_reg.h
dp83640.c net: ptp: move PTP classifier in its own file 2014-04-01 16:43:18 -04:00
et1011c.c
fixed.c phy: Use pr_<level> 2012-06-11 16:58:24 -07:00
icplus.c net: phy: icplus: fix checkpath error 2013-12-18 00:49:02 -05:00
Kconfig net: phy: add Broadcom BCM7xxx internal PHY driver 2014-02-14 00:27:58 -05:00
lxt.c net: phy: lxt: fix checkpath errors 2013-12-18 00:49:02 -05:00
Makefile net: phy: add Broadcom BCM7xxx internal PHY driver 2014-02-14 00:27:58 -05:00
marvell.c net: phy: marvell: provide genphy suspend/resume 2013-12-17 14:42:44 -05:00
mdio_bus.c net: phy: expose phydev->has_fixups to sysfs 2014-02-12 19:08:49 -05:00
mdio-bitbang.c Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free" 2012-11-14 22:32:15 -05:00
mdio-gpio.c net: mdio-gpio: Add support for separate MDI and MDO gpio pins 2014-04-16 15:09:51 -04:00
mdio-moxart.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-mux-mmioreg.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-mux.c netdev/phy: skip disabled mdio-mux nodes 2012-08-20 02:16:00 -07:00
mdio-octeon.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-sun4i.c net: sun4i: remove empty MDIO bus reset function 2014-03-28 01:38:02 -04:00
micrel.c net/phy: micrel: fix bugged test on device tree loading for ksz9021 2014-04-23 14:58:58 -04:00
national.c phy: Use pr_<level> 2012-06-11 16:58:24 -07:00
phy_device.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-03-25 20:29:20 -04:00
phy.c net phylib: Remove unnecessary condition check in phy 2014-04-09 13:03:53 -04:00
qsemi.c
realtek.c PHY: Add RTL8201CP phy_driver to realtek 2013-11-11 14:05:03 -05:00
smsc.c net: phy: smsc: Fix config_init typo 2012-12-07 14:26:15 -05:00
spi_ks8995.c net: Micrel KSZ8864RMN 4-port managed switch support 2014-04-03 16:15:29 -04:00
ste10Xp.c phylib: Support registering a bunch of drivers 2012-07-09 00:10:56 -07:00
vitesse.c phy: Add Vitesse 8514 phy ID 2013-11-28 18:30:54 -05:00