forked from Minki/linux
c0d6fe2f01
As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here.) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWQT2WAAoJEIwa5zzehBx37tgQAIBe5eDJFXFihTlyOQ2plL3q vVH4OCzXIHELfM1J8CGZNah1wCQqNOts8RAmDCzxr+zSYuLOwJOEDZ6NKmErMxl0 NTj3+BsqKO3NRym970ofPqU9JRLQmpZ8K7dzk8Nwj2+r1WZHFu/j6Jv44n/Ns0lw 7+wxnG322lTm7SnvALCMD5lD4Y7VpThooWy5SdFtRoAetn+cLbVCJIeeQvO6Vxkp NooeJR0t2e8cpbAND5Jwu6eeWRcIbrvgjYDe0omhrIY05i9yNvIsC2HuQFGjF43z p2CnQvcKnhOXTZw3yse1Fx5igA7jqwVjjC/lVeDyxhusAtLpmuB6qbSaj7DpqkSQ nJxX1d49WKm68K+aknmee1kYRrvc4DE/kORI4IxXnsVNMu16ifTVLnxKgUhwzukb eZdTP6rsqgNozaYvh0k1vfSFd+CNSkBg+E9nrI3tU95yo3LOIhobVBCvBcWlmUvQ JdavRztqosChjIx3a9i1eCNKJtCg9p4m+gWjUqVVWsxBHe/3HojzjZnsBSynIQMA uGIVm0TKhNl1Svxl3oJo9257UCUK7+5PqJHK9IHrcWDULYx05JGSjuZcyvNS6Fo+ u1DMf0ud4gXJYhecFBa7b3zRjk5YxptgCCTjeEEOTUJbbhZqDjGFZlNuFi6dmqD3 ILJ2QMe/DGiPIlUmCfsx =qY1q -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
637 lines
14 KiB
Plaintext
637 lines
14 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/berlin2q.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
model = "Marvell Armada 1500 pro (BG2-Q) SoC";
|
|
compatible = "marvell,berlin2q", "marvell,berlin";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "marvell,berlin-smp";
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
next-level-cache = <&l2>;
|
|
reg = <0>;
|
|
|
|
clocks = <&chip_clk CLKID_CPU>;
|
|
clock-latency = <100000>;
|
|
/* Can be modified by the bootloader */
|
|
operating-points = <
|
|
/* kHz uV */
|
|
1200000 1200000
|
|
1000000 1200000
|
|
800000 1200000
|
|
600000 1200000
|
|
>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
next-level-cache = <&l2>;
|
|
reg = <1>;
|
|
};
|
|
|
|
cpu@2 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
next-level-cache = <&l2>;
|
|
reg = <2>;
|
|
};
|
|
|
|
cpu@3 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
next-level-cache = <&l2>;
|
|
reg = <3>;
|
|
};
|
|
};
|
|
|
|
refclk: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0 0xf7000000 0x1000000>;
|
|
interrupt-parent = <&gic>;
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sdhci0: sdhci@ab0000 {
|
|
compatible = "mrvl,pxav3-mmc";
|
|
reg = <0xab0000 0x200>;
|
|
clocks = <&chip_clk CLKID_SDIO1XIN>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci1: sdhci@ab0800 {
|
|
compatible = "mrvl,pxav3-mmc";
|
|
reg = <0xab0800 0x200>;
|
|
clocks = <&chip_clk CLKID_SDIO1XIN>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci2: sdhci@ab1000 {
|
|
compatible = "mrvl,pxav3-mmc";
|
|
reg = <0xab1000 0x200>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
|
|
clock-names = "io", "core";
|
|
status = "disabled";
|
|
};
|
|
|
|
l2: l2-cache-controller@ac0000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xac0000 0x1000>;
|
|
cache-level = <2>;
|
|
arm,data-latency = <2 2 2>;
|
|
arm,tag-latency = <2 2 2>;
|
|
};
|
|
|
|
scu: snoop-control-unit@ad0000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0xad0000 0x58>;
|
|
};
|
|
|
|
local-timer@ad0600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xad0600 0x20>;
|
|
clocks = <&chip_clk CLKID_TWD>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
gic: interrupt-controller@ad1000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
reg = <0xad1000 0x1000>, <0xad0100 0x100>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
};
|
|
|
|
usb_phy2: phy@a2f400 {
|
|
compatible = "marvell,berlin2cd-usb-phy";
|
|
reg = <0xa2f400 0x128>;
|
|
#phy-cells = <0>;
|
|
resets = <&chip_rst 0x104 14>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2: usb@a30000 {
|
|
compatible = "chipidea,usb2";
|
|
reg = <0xa30000 0x10000>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&chip_clk CLKID_USB2>;
|
|
phys = <&usb_phy2>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_phy0: phy@b74000 {
|
|
compatible = "marvell,berlin2cd-usb-phy";
|
|
reg = <0xb74000 0x128>;
|
|
#phy-cells = <0>;
|
|
resets = <&chip_rst 0x104 12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_phy1: phy@b78000 {
|
|
compatible = "marvell,berlin2cd-usb-phy";
|
|
reg = <0xb78000 0x128>;
|
|
#phy-cells = <0>;
|
|
resets = <&chip_rst 0x104 13>;
|
|
status = "disabled";
|
|
};
|
|
|
|
eth0: ethernet@b90000 {
|
|
compatible = "marvell,pxa168-eth";
|
|
reg = <0xb90000 0x10000>;
|
|
clocks = <&chip_clk CLKID_GETH0>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
/* set by bootloader */
|
|
local-mac-address = [00 00 00 00 00 00];
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy-connection-type = "mii";
|
|
phy-handle = <ðphy0>;
|
|
status = "disabled";
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
cpu-ctrl@dd0000 {
|
|
compatible = "marvell,berlin-cpu-ctrl";
|
|
reg = <0xdd0000 0x10000>;
|
|
};
|
|
|
|
apb@e80000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0 0xe80000 0x10000>;
|
|
interrupt-parent = <&aic>;
|
|
|
|
gpio0: gpio@0400 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x0400 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
porta: gpio-port@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <32>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0>;
|
|
};
|
|
};
|
|
|
|
gpio1: gpio@0800 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x0800 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portb: gpio-port@1 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <32>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <1>;
|
|
};
|
|
};
|
|
|
|
gpio2: gpio@0c00 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x0c00 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portc: gpio-port@2 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <32>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <2>;
|
|
};
|
|
};
|
|
|
|
gpio3: gpio@1000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x1000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portd: gpio-port@3 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <32>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <3>;
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@1400 {
|
|
compatible = "snps,designware-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1400 0x100>;
|
|
interrupt-parent = <&aic>;
|
|
interrupts = <4>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
pinctrl-0 = <&twsi0_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@1800 {
|
|
compatible = "snps,designware-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1800 0x100>;
|
|
interrupt-parent = <&aic>;
|
|
interrupts = <5>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
pinctrl-0 = <&twsi1_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer0: timer@2c00 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c00 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
interrupts = <8>;
|
|
};
|
|
|
|
timer1: timer@2c14 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c14 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
};
|
|
|
|
timer2: timer@2c28 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c28 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer3: timer@2c3c {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c3c 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer4: timer@2c50 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c50 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer5: timer@2c64 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c64 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer6: timer@2c78 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c78 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer7: timer@2c8c {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c8c 0x14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
aic: interrupt-controller@3800 {
|
|
compatible = "snps,dw-apb-ictl";
|
|
reg = <0x3800 0x30>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
chip: chip-control@ea0000 {
|
|
compatible = "simple-mfd", "syscon";
|
|
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
|
|
|
|
chip_clk: clock {
|
|
compatible = "marvell,berlin2q-clk";
|
|
#clock-cells = <1>;
|
|
clocks = <&refclk>;
|
|
clock-names = "refclk";
|
|
};
|
|
|
|
soc_pinctrl: pin-controller {
|
|
compatible = "marvell,berlin2q-soc-pinctrl";
|
|
|
|
twsi0_pmux: twsi0-pmux {
|
|
groups = "G6";
|
|
function = "twsi0";
|
|
};
|
|
|
|
twsi1_pmux: twsi1-pmux {
|
|
groups = "G7";
|
|
function = "twsi1";
|
|
};
|
|
};
|
|
|
|
chip_rst: reset {
|
|
compatible = "marvell,berlin2-reset";
|
|
#reset-cells = <2>;
|
|
};
|
|
};
|
|
|
|
ahci: sata@e90000 {
|
|
compatible = "marvell,berlin2q-ahci", "generic-ahci";
|
|
reg = <0xe90000 0x1000>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&chip_clk CLKID_SATA>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata0: sata-port@0 {
|
|
reg = <0>;
|
|
phys = <&sata_phy 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata1: sata-port@1 {
|
|
reg = <1>;
|
|
phys = <&sata_phy 1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sata_phy: phy@e900a0 {
|
|
compatible = "marvell,berlin2q-sata-phy";
|
|
reg = <0xe900a0 0x200>;
|
|
clocks = <&chip_clk CLKID_SATA>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
|
|
sata-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
sata-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
usb0: usb@ed0000 {
|
|
compatible = "chipidea,usb2";
|
|
reg = <0xed0000 0x10000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&chip_clk CLKID_USB0>;
|
|
phys = <&usb_phy0>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@ee0000 {
|
|
compatible = "chipidea,usb2";
|
|
reg = <0xee0000 0x10000>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&chip_clk CLKID_USB1>;
|
|
phys = <&usb_phy1>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@f20000 {
|
|
compatible = "marvell,berlin-pwm";
|
|
reg = <0xf20000 0x40>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
#pwm-cells = <3>;
|
|
};
|
|
|
|
apb@fc0000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0 0xfc0000 0x10000>;
|
|
interrupt-parent = <&sic>;
|
|
|
|
sm_gpio1: gpio@5000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x5000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portf: gpio-port@5 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <32>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
i2c2: i2c@7000 {
|
|
compatible = "snps,designware-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x7000 0x100>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <6>;
|
|
clocks = <&refclk>;
|
|
pinctrl-0 = <&twsi2_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@8000 {
|
|
compatible = "snps,designware-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x8000 0x100>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <7>;
|
|
clocks = <&refclk>;
|
|
pinctrl-0 = <&twsi3_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: uart@9000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x9000 0x100>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <8>;
|
|
clocks = <&refclk>;
|
|
reg-shift = <2>;
|
|
pinctrl-0 = <&uart0_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: uart@a000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xa000 0x100>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <9>;
|
|
clocks = <&refclk>;
|
|
reg-shift = <2>;
|
|
pinctrl-0 = <&uart1_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
sm_gpio0: gpio@c000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xc000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
porte: gpio-port@4 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <32>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
sysctrl: pin-controller@d000 {
|
|
compatible = "simple-mfd", "syscon";
|
|
reg = <0xd000 0x100>;
|
|
|
|
sys_pinctrl: pin-controller {
|
|
compatible = "marvell,berlin2q-system-pinctrl";
|
|
|
|
uart0_pmux: uart0-pmux {
|
|
groups = "GSM12";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pmux: uart1-pmux {
|
|
groups = "GSM14";
|
|
function = "uart1";
|
|
};
|
|
|
|
twsi2_pmux: twsi2-pmux {
|
|
groups = "GSM13";
|
|
function = "twsi2";
|
|
};
|
|
|
|
twsi3_pmux: twsi3-pmux {
|
|
groups = "GSM14";
|
|
function = "twsi3";
|
|
};
|
|
};
|
|
|
|
adc: adc {
|
|
compatible = "marvell,berlin2-adc";
|
|
interrupts = <12>, <14>;
|
|
interrupt-names = "adc", "tsen";
|
|
};
|
|
};
|
|
|
|
sic: interrupt-controller@e000 {
|
|
compatible = "snps,dw-apb-ictl";
|
|
reg = <0xe000 0x30>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
};
|