linux/arch/mips/pmc-sierra/yosemite/irq.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

168 lines
5.0 KiB
C

/*
* Copyright (C) 2003 PMC-Sierra Inc.
* Author: Manish Lachwani (lachwani@pmc-sierra.com)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Second level Interrupt handlers for the PMC-Sierra Titan/Yosemite board
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/titan_dep.h>
/* Hypertransport specific */
#define IRQ_ACK_BITS 0x00000000 /* Ack bits */
#define HYPERTRANSPORT_INTA 0x78 /* INTA# */
#define HYPERTRANSPORT_INTB 0x79 /* INTB# */
#define HYPERTRANSPORT_INTC 0x7a /* INTC# */
#define HYPERTRANSPORT_INTD 0x7b /* INTD# */
extern asmlinkage void titan_handle_int(void);
extern void jaguar_mailbox_irq(struct pt_regs *);
/*
* Handle hypertransport & SMP interrupts. The interrupt lines are scarce.
* For interprocessor interrupts, the best thing to do is to use the INTMSG
* register. We use the same external interrupt line, i.e. INTB3 and monitor
* another status bit
*/
asmlinkage void ll_ht_smp_irq_handler(int irq, struct pt_regs *regs)
{
u32 status = OCD_READ(RM9000x2_OCD_INTP0STATUS4);
/* Ack all the bits that correspond to the interrupt sources */
if (status != 0)
OCD_WRITE(RM9000x2_OCD_INTP0STATUS4, IRQ_ACK_BITS);
status = OCD_READ(RM9000x2_OCD_INTP1STATUS4);
if (status != 0)
OCD_WRITE(RM9000x2_OCD_INTP1STATUS4, IRQ_ACK_BITS);
#ifdef CONFIG_HT_LEVEL_TRIGGER
/*
* Level Trigger Mode only. Send the HT EOI message back to the source.
*/
switch (status) {
case 0x1000000:
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
break;
case 0x2000000:
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
break;
case 0x4000000:
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
break;
case 0x8000000:
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
break;
case 0x0000001:
/* PLX */
OCD_WRITE(RM9000x2_OCD_HTEOI, 0x20);
OCD_WRITE(IRQ_CLEAR_REG, IRQ_ACK_BITS);
break;
case 0xf000000:
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
break;
}
#endif /* CONFIG_HT_LEVEL_TRIGGER */
do_IRQ(irq, regs);
}
asmlinkage void do_extended_irq(struct pt_regs *regs)
{
unsigned int intcontrol = read_c0_intcontrol();
unsigned int cause = read_c0_cause();
unsigned int status = read_c0_status();
unsigned int pending_sr, pending_ic;
pending_sr = status & cause & 0xff00;
pending_ic = (cause >> 8) & intcontrol & 0xff00;
if (pending_ic & (1 << 13))
do_IRQ(13, regs);
}
#ifdef CONFIG_KGDB
extern void init_second_port(void);
#endif
/*
* Initialize the next level interrupt handler
*/
void __init arch_init_irq(void)
{
clear_c0_status(ST0_IM);
set_except_vector(0, titan_handle_int);
mips_cpu_irq_init(0);
rm7k_cpu_irq_init(8);
rm9k_cpu_irq_init(12);
#ifdef CONFIG_KGDB
/* At this point, initialize the second serial port */
init_second_port();
#endif
#ifdef CONFIG_GDB_CONSOLE
register_gdb_console();
#endif
}
#ifdef CONFIG_KGDB
/*
* The 16550 DUART has two ports, but is allocated one IRQ
* for the serial console. Hence, a generic framework for
* serial IRQ routing in place. Currently, just calls the
* do_IRQ fuction. But, going in the future, need to check
* DUART registers for channel A and B, then decide the
* appropriate action
*/
asmlinkage void yosemite_kgdb_irq(int irq, struct pt_regs *regs)
{
do_IRQ(irq, regs);
}
#endif