forked from Minki/linux
6ba3d7066c
Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema. (A first user of this.) -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl4xQIkACgkQQRCzN7AZ XXNchQ/8C4+SAMMcDQm4sIWV1duebynrXuebISqWMhAtYDRjCsRpGCqVSt+iSWod z29pJ/sm0xpG1Bz0bmDZ4oFv7u7+J89a/0Kl4OqI1pbO97Uadu2qGmYxZf2tMtlH CwWVOUAldU9scogRD6Z+qixYdRRpKufpaVaU7ooubHocmgRtzd/VCT2MX76c3w7j 1+yHjoAKM59jpOD/8oEucEYB+5ngyTiMXo3Nms/6ciq52GdtMLE8nK+t7dM+xNLL hMQP95iQ2Xb+cM/bv+vdMyKF6vRxKkkeQ/hWcivGWgdI/BSFg0vCq0mWdc8qWp8k VeIBaTVh5wuaAdkir9dHX/zt6TsRV8ktv88jW773/z4jHr/8PmQUyFMyEA1u1haP yrC/vm4eL6QWCAZeATra5+5FoH2ljzwaY2rgeU0hNixjaF/aIp3GPci7+YmKHTIr 5zZTXKAeuC/nV7g77w4O9iwn+SHWPytWBrfNZ7unyV5fl4XHckY2vNBa/g8xkYyb FBk642EwHRGCULb8m40+cB7TMUzk9aluXge1detJDbqlr2i+tSOWp1c3GSavLl1L 4qRAAS2j6de1H/EaoO7EcArVrSMdPgLdpRmwCMc2xvL0HOprl6y+5iL7x86ZtQHu NHvgnjtw6Z6t9n28f5ZI1iEXUA6EHOHHc/sPPUqScCj4v85B25A= =PnK5 -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...
320 lines
8.5 KiB
C
320 lines
8.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2017 Broadcom
|
|
*/
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define IPROC_CCA_INT_F_GPIOINT BIT(0)
|
|
#define IPROC_CCA_INT_STS 0x20
|
|
#define IPROC_CCA_INT_MASK 0x24
|
|
|
|
#define IPROC_GPIO_CCA_DIN 0x0
|
|
#define IPROC_GPIO_CCA_DOUT 0x4
|
|
#define IPROC_GPIO_CCA_OUT_EN 0x8
|
|
#define IPROC_GPIO_CCA_INT_LEVEL 0x10
|
|
#define IPROC_GPIO_CCA_INT_LEVEL_MASK 0x14
|
|
#define IPROC_GPIO_CCA_INT_EVENT 0x18
|
|
#define IPROC_GPIO_CCA_INT_EVENT_MASK 0x1C
|
|
#define IPROC_GPIO_CCA_INT_EDGE 0x24
|
|
|
|
struct iproc_gpio_chip {
|
|
struct irq_chip irqchip;
|
|
struct gpio_chip gc;
|
|
spinlock_t lock;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
void __iomem *intr;
|
|
};
|
|
|
|
static inline struct iproc_gpio_chip *
|
|
to_iproc_gpio(struct gpio_chip *gc)
|
|
{
|
|
return container_of(gc, struct iproc_gpio_chip, gc);
|
|
}
|
|
|
|
static void iproc_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
|
|
int pin = d->hwirq;
|
|
unsigned long flags;
|
|
u32 irq = d->irq;
|
|
u32 irq_type, event_status = 0;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
irq_type = irq_get_trigger_type(irq);
|
|
if (irq_type & IRQ_TYPE_EDGE_BOTH) {
|
|
event_status |= BIT(pin);
|
|
writel_relaxed(event_status,
|
|
chip->base + IPROC_GPIO_CCA_INT_EVENT);
|
|
}
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static void iproc_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
|
|
int pin = d->hwirq;
|
|
unsigned long flags;
|
|
u32 irq = d->irq;
|
|
u32 int_mask, irq_type, event_mask;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
irq_type = irq_get_trigger_type(irq);
|
|
event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
|
|
int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
|
|
|
|
if (irq_type & IRQ_TYPE_EDGE_BOTH) {
|
|
event_mask |= 1 << pin;
|
|
writel_relaxed(event_mask,
|
|
chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
|
|
} else {
|
|
int_mask |= 1 << pin;
|
|
writel_relaxed(int_mask,
|
|
chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
|
|
}
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static void iproc_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
|
|
int pin = d->hwirq;
|
|
unsigned long flags;
|
|
u32 irq = d->irq;
|
|
u32 irq_type, int_mask, event_mask;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
irq_type = irq_get_trigger_type(irq);
|
|
event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
|
|
int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
|
|
|
|
if (irq_type & IRQ_TYPE_EDGE_BOTH) {
|
|
event_mask &= ~BIT(pin);
|
|
writel_relaxed(event_mask,
|
|
chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
|
|
} else {
|
|
int_mask &= ~BIT(pin);
|
|
writel_relaxed(int_mask,
|
|
chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
|
|
}
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static int iproc_gpio_irq_set_type(struct irq_data *d, u32 type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
|
|
int pin = d->hwirq;
|
|
unsigned long flags;
|
|
u32 irq = d->irq;
|
|
u32 event_pol, int_pol;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
|
|
event_pol &= ~BIT(pin);
|
|
writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
|
|
event_pol |= BIT(pin);
|
|
writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
|
|
int_pol &= ~BIT(pin);
|
|
writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
|
|
int_pol |= BIT(pin);
|
|
writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
|
|
break;
|
|
default:
|
|
/* should not come here */
|
|
ret = -EINVAL;
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (type & IRQ_TYPE_LEVEL_MASK)
|
|
irq_set_handler_locked(irq_get_irq_data(irq), handle_level_irq);
|
|
else if (type & IRQ_TYPE_EDGE_BOTH)
|
|
irq_set_handler_locked(irq_get_irq_data(irq), handle_edge_irq);
|
|
|
|
out_unlock:
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t iproc_gpio_irq_handler(int irq, void *data)
|
|
{
|
|
struct gpio_chip *gc = (struct gpio_chip *)data;
|
|
struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
|
|
int bit;
|
|
unsigned long int_bits = 0;
|
|
u32 int_status;
|
|
|
|
/* go through the entire GPIOs and handle all interrupts */
|
|
int_status = readl_relaxed(chip->intr + IPROC_CCA_INT_STS);
|
|
if (int_status & IPROC_CCA_INT_F_GPIOINT) {
|
|
u32 event, level;
|
|
|
|
/* Get level and edge interrupts */
|
|
event =
|
|
readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
|
|
event &= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT);
|
|
level = readl_relaxed(chip->base + IPROC_GPIO_CCA_DIN);
|
|
level ^= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
|
|
level &=
|
|
readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
|
|
int_bits = level | event;
|
|
|
|
for_each_set_bit(bit, &int_bits, gc->ngpio)
|
|
generic_handle_irq(irq_linear_revmap(gc->irq.domain, bit));
|
|
}
|
|
|
|
return int_bits ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static int iproc_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *dn = pdev->dev.of_node;
|
|
struct iproc_gpio_chip *chip;
|
|
u32 num_gpios;
|
|
int irq, ret;
|
|
|
|
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->dev = dev;
|
|
platform_set_drvdata(pdev, chip);
|
|
spin_lock_init(&chip->lock);
|
|
|
|
chip->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(chip->base))
|
|
return PTR_ERR(chip->base);
|
|
|
|
ret = bgpio_init(&chip->gc, dev, 4,
|
|
chip->base + IPROC_GPIO_CCA_DIN,
|
|
chip->base + IPROC_GPIO_CCA_DOUT,
|
|
NULL,
|
|
chip->base + IPROC_GPIO_CCA_OUT_EN,
|
|
NULL,
|
|
0);
|
|
if (ret) {
|
|
dev_err(dev, "unable to init GPIO chip\n");
|
|
return ret;
|
|
}
|
|
|
|
chip->gc.label = dev_name(dev);
|
|
if (of_property_read_u32(dn, "ngpios", &num_gpios))
|
|
chip->gc.ngpio = num_gpios;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq > 0) {
|
|
struct gpio_irq_chip *girq;
|
|
struct irq_chip *irqc;
|
|
u32 val;
|
|
|
|
irqc = &chip->irqchip;
|
|
irqc->name = dev_name(dev);
|
|
irqc->irq_ack = iproc_gpio_irq_ack;
|
|
irqc->irq_mask = iproc_gpio_irq_mask;
|
|
irqc->irq_unmask = iproc_gpio_irq_unmask;
|
|
irqc->irq_set_type = iproc_gpio_irq_set_type;
|
|
|
|
chip->intr = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(chip->intr))
|
|
return PTR_ERR(chip->intr);
|
|
|
|
/* Enable GPIO interrupts for CCA GPIO */
|
|
val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
|
|
val |= IPROC_CCA_INT_F_GPIOINT;
|
|
writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
|
|
|
|
/*
|
|
* Directly request the irq here instead of passing
|
|
* a flow-handler because the irq is shared.
|
|
*/
|
|
ret = devm_request_irq(dev, irq, iproc_gpio_irq_handler,
|
|
IRQF_SHARED, chip->gc.label, &chip->gc);
|
|
if (ret) {
|
|
dev_err(dev, "Fail to request IRQ%d: %d\n", irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
girq = &chip->gc.irq;
|
|
girq->chip = irqc;
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_simple_irq;
|
|
}
|
|
|
|
ret = devm_gpiochip_add_data(dev, &chip->gc, chip);
|
|
if (ret) {
|
|
dev_err(dev, "unable to add GPIO chip\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iproc_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct iproc_gpio_chip *chip;
|
|
|
|
chip = platform_get_drvdata(pdev);
|
|
if (!chip)
|
|
return -ENODEV;
|
|
|
|
if (chip->intr) {
|
|
u32 val;
|
|
|
|
val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
|
|
val &= ~IPROC_CCA_INT_F_GPIOINT;
|
|
writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm_iproc_gpio_of_match[] = {
|
|
{ .compatible = "brcm,iproc-gpio-cca" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm_iproc_gpio_of_match);
|
|
|
|
static struct platform_driver bcm_iproc_gpio_driver = {
|
|
.driver = {
|
|
.name = "iproc-xgs-gpio",
|
|
.of_match_table = bcm_iproc_gpio_of_match,
|
|
},
|
|
.probe = iproc_gpio_probe,
|
|
.remove = iproc_gpio_remove,
|
|
};
|
|
|
|
module_platform_driver(bcm_iproc_gpio_driver);
|
|
|
|
MODULE_DESCRIPTION("XGS IPROC GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|