forked from Minki/linux
67dc320d47
This patch moves 4965 SCD registers to iwl-prph.h. These registers are assigned from the periphery bus Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
259 lines
12 KiB
C
259 lines
12 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* Contact Information:
|
|
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*****************************************************************************/
|
|
|
|
#ifndef __iwl_prph_h__
|
|
#define __iwl_prph_h__
|
|
|
|
|
|
#define PRPH_BASE (0x00000)
|
|
#define PRPH_END (0xFFFFF)
|
|
|
|
/* APMG (power management) constants */
|
|
#define APMG_BASE (PRPH_BASE + 0x3000)
|
|
#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000)
|
|
#define APMG_CLK_EN_REG (APMG_BASE + 0x0004)
|
|
#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008)
|
|
#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c)
|
|
#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010)
|
|
#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
|
|
#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
|
|
#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
|
|
|
|
#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
|
|
#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
|
|
|
|
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
|
|
|
|
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
|
|
|
|
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
|
|
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
|
|
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x01000000)
|
|
|
|
|
|
/**
|
|
* BSM (Bootstrap State Machine)
|
|
*
|
|
* The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
|
|
* in special SRAM that does not power down when the embedded control
|
|
* processor is sleeping (e.g. for periodic power-saving shutdowns of radio).
|
|
*
|
|
* When powering back up after sleeps (or during initial uCode load), the BSM
|
|
* internally loads the short bootstrap program from the special SRAM into the
|
|
* embedded processor's instruction SRAM, and starts the processor so it runs
|
|
* the bootstrap program.
|
|
*
|
|
* This bootstrap program loads (via PCI busmaster DMA) instructions and data
|
|
* images for a uCode program from host DRAM locations. The host driver
|
|
* indicates DRAM locations and sizes for instruction and data images via the
|
|
* four BSM_DRAM_* registers. Once the bootstrap program loads the new program,
|
|
* the new program starts automatically.
|
|
*
|
|
* The uCode used for open-source drivers includes two programs:
|
|
*
|
|
* 1) Initialization -- performs hardware calibration and sets up some
|
|
* internal data, then notifies host via "initialize alive" notification
|
|
* (struct iwl_init_alive_resp) that it has completed all of its work.
|
|
* After signal from host, it then loads and starts the runtime program.
|
|
* The initialization program must be used when initially setting up the
|
|
* NIC after loading the driver.
|
|
*
|
|
* 2) Runtime/Protocol -- performs all normal runtime operations. This
|
|
* notifies host via "alive" notification (struct iwl_alive_resp) that it
|
|
* is ready to be used.
|
|
*
|
|
* When initializing the NIC, the host driver does the following procedure:
|
|
*
|
|
* 1) Load bootstrap program (instructions only, no data image for bootstrap)
|
|
* into bootstrap memory. Use dword writes starting at BSM_SRAM_LOWER_BOUND
|
|
*
|
|
* 2) Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction
|
|
* images in host DRAM.
|
|
*
|
|
* 3) Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked:
|
|
* BSM_WR_MEM_SRC_REG = 0
|
|
* BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND
|
|
* BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image
|
|
*
|
|
* 4) Load bootstrap into instruction SRAM:
|
|
* BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START
|
|
*
|
|
* 5) Wait for load completion:
|
|
* Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0
|
|
*
|
|
* 6) Enable future boot loads whenever NIC's power management triggers it:
|
|
* BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN
|
|
*
|
|
* 7) Start the NIC by removing all reset bits:
|
|
* CSR_RESET = 0
|
|
*
|
|
* The bootstrap uCode (already in instruction SRAM) loads initialization
|
|
* uCode. Initialization uCode performs data initialization, sends
|
|
* "initialize alive" notification to host, and waits for a signal from
|
|
* host to load runtime code.
|
|
*
|
|
* 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction
|
|
* images in host DRAM. The last register loaded must be the instruction
|
|
* bytecount register ("1" in MSbit tells initialization uCode to load
|
|
* the runtime uCode):
|
|
* BSM_DRAM_INST_BYTECOUNT_REG = bytecount | BSM_DRAM_INST_LOAD
|
|
*
|
|
* 5) Wait for "alive" notification, then issue normal runtime commands.
|
|
*
|
|
* Data caching during power-downs:
|
|
*
|
|
* Just before the embedded controller powers down (e.g for automatic
|
|
* power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA)
|
|
* a current snapshot of the embedded processor's data SRAM into host DRAM.
|
|
* This caches the data while the embedded processor's memory is powered down.
|
|
* Location and size are controlled by BSM_DRAM_DATA_* registers.
|
|
*
|
|
* NOTE: Instruction SRAM does not need to be saved, since that doesn't
|
|
* change during operation; the original image (from uCode distribution
|
|
* file) can be used for reload.
|
|
*
|
|
* When powering back up, the BSM loads the bootstrap program. Bootstrap looks
|
|
* at the BSM_DRAM_* registers, which now point to the runtime instruction
|
|
* image and the cached (modified) runtime data (*not* the initialization
|
|
* uCode). Bootstrap reloads these runtime images into SRAM, and restarts the
|
|
* uCode from where it left off before the power-down.
|
|
*
|
|
* NOTE: Initialization uCode does *not* run as part of the save/restore
|
|
* procedure.
|
|
*
|
|
* This save/restore method is mostly for autonomous power management during
|
|
* normal operation (result of POWER_TABLE_CMD). Platform suspend/resume and
|
|
* RFKILL should use complete restarts (with total re-initialization) of uCode,
|
|
* allowing total shutdown (including BSM memory).
|
|
*
|
|
* Note that, during normal operation, the host DRAM that held the initial
|
|
* startup data for the runtime code is now being used as a backup data cache
|
|
* for modified data! If you need to completely re-initialize the NIC, make
|
|
* sure that you use the runtime data image from the uCode distribution file,
|
|
* not the modified/saved runtime data. You may want to store a separate
|
|
* "clean" runtime data image in DRAM to avoid disk reads of distribution file.
|
|
*/
|
|
|
|
/* BSM bit fields */
|
|
#define BSM_WR_CTRL_REG_BIT_START (0x80000000) /* start boot load now */
|
|
#define BSM_WR_CTRL_REG_BIT_START_EN (0x40000000) /* enable boot after pwrup*/
|
|
#define BSM_DRAM_INST_LOAD (0x80000000) /* start program load now */
|
|
|
|
/* BSM addresses */
|
|
#define BSM_BASE (PRPH_BASE + 0x3400)
|
|
#define BSM_END (PRPH_BASE + 0x3800)
|
|
|
|
#define BSM_WR_CTRL_REG (BSM_BASE + 0x000) /* ctl and status */
|
|
#define BSM_WR_MEM_SRC_REG (BSM_BASE + 0x004) /* source in BSM mem */
|
|
#define BSM_WR_MEM_DST_REG (BSM_BASE + 0x008) /* dest in SRAM mem */
|
|
#define BSM_WR_DWCOUNT_REG (BSM_BASE + 0x00C) /* bytes */
|
|
#define BSM_WR_STATUS_REG (BSM_BASE + 0x010) /* bit 0: 1 == done */
|
|
|
|
/*
|
|
* Pointers and size regs for bootstrap load and data SRAM save/restore.
|
|
* NOTE: 3945 pointers use bits 31:0 of DRAM address.
|
|
* 4965 pointers use bits 35:4 of DRAM address.
|
|
*/
|
|
#define BSM_DRAM_INST_PTR_REG (BSM_BASE + 0x090)
|
|
#define BSM_DRAM_INST_BYTECOUNT_REG (BSM_BASE + 0x094)
|
|
#define BSM_DRAM_DATA_PTR_REG (BSM_BASE + 0x098)
|
|
#define BSM_DRAM_DATA_BYTECOUNT_REG (BSM_BASE + 0x09C)
|
|
|
|
/*
|
|
* BSM special memory, stays powered on during power-save sleeps.
|
|
* Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1)
|
|
*/
|
|
#define BSM_SRAM_LOWER_BOUND (PRPH_BASE + 0x3800)
|
|
#define BSM_SRAM_SIZE (1024) /* bytes */
|
|
|
|
/* 4965 SCD memory mapped registers */
|
|
#define KDR_SCD_BASE (PRPH_BASE + 0xa02c00)
|
|
|
|
#define KDR_SCD_SRAM_BASE_ADDR (KDR_SCD_BASE + 0x0)
|
|
#define KDR_SCD_EMPTY_BITS (KDR_SCD_BASE + 0x4)
|
|
#define KDR_SCD_DRAM_BASE_ADDR (KDR_SCD_BASE + 0x10)
|
|
#define KDR_SCD_AIT (KDR_SCD_BASE + 0x18)
|
|
#define KDR_SCD_TXFACT (KDR_SCD_BASE + 0x1c)
|
|
#define KDR_SCD_QUEUE_WRPTR(x) (KDR_SCD_BASE + 0x24 + (x) * 4)
|
|
#define KDR_SCD_QUEUE_RDPTR(x) (KDR_SCD_BASE + 0x64 + (x) * 4)
|
|
#define KDR_SCD_SETQUEUENUM (KDR_SCD_BASE + 0xa4)
|
|
#define KDR_SCD_SET_TXSTAT_TXED (KDR_SCD_BASE + 0xa8)
|
|
#define KDR_SCD_SET_TXSTAT_DONE (KDR_SCD_BASE + 0xac)
|
|
#define KDR_SCD_SET_TXSTAT_NOT_SCHD (KDR_SCD_BASE + 0xb0)
|
|
#define KDR_SCD_DECREASE_CREDIT (KDR_SCD_BASE + 0xb4)
|
|
#define KDR_SCD_DECREASE_SCREDIT (KDR_SCD_BASE + 0xb8)
|
|
#define KDR_SCD_LOAD_CREDIT (KDR_SCD_BASE + 0xbc)
|
|
#define KDR_SCD_LOAD_SCREDIT (KDR_SCD_BASE + 0xc0)
|
|
#define KDR_SCD_BAR (KDR_SCD_BASE + 0xc4)
|
|
#define KDR_SCD_BAR_DW0 (KDR_SCD_BASE + 0xc8)
|
|
#define KDR_SCD_BAR_DW1 (KDR_SCD_BASE + 0xcc)
|
|
#define KDR_SCD_QUEUECHAIN_SEL (KDR_SCD_BASE + 0xd0)
|
|
#define KDR_SCD_QUERY_REQ (KDR_SCD_BASE + 0xd8)
|
|
#define KDR_SCD_QUERY_RES (KDR_SCD_BASE + 0xdc)
|
|
#define KDR_SCD_PENDING_FRAMES (KDR_SCD_BASE + 0xe0)
|
|
#define KDR_SCD_INTERRUPT_MASK (KDR_SCD_BASE + 0xe4)
|
|
#define KDR_SCD_INTERRUPT_THRESHOLD (KDR_SCD_BASE + 0xe8)
|
|
#define KDR_SCD_QUERY_MIN_FRAME_SIZE (KDR_SCD_BASE + 0x100)
|
|
#define KDR_SCD_QUEUE_STATUS_BITS(x) (KDR_SCD_BASE + 0x104 + (x) * 4)
|
|
|
|
#endif /* __iwl_prph_h__ */
|