linux/drivers/ata
Tejun Heo 66a7cbc303 ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks
Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so
67809f85d3 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks")
disabled NCQ on them.  It turns out that NCQ is fine as long as MSI is
not used, so let's turn off MSI and leave NCQ on.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=60731
Tested-by: <dorin@i51.org>
Tested-by: Imre Kaloz <kaloz@openwrt.org>
Cc: stable@vger.kernel.org
Fixes: 67809f85d3 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks")
2014-10-27 12:02:11 -04:00
..
acard-ahci.c AHCI: Move host activation code into ahci_host_activate() 2014-10-06 11:43:35 -04:00
ahci_da850.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_imx.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_mvebu.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_platform.c ata: remove deprecated struct ahci_platform_data 2014-08-16 08:35:34 -04:00
ahci_st.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_sunxi.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_tegra.c ata: ahci_tegra: Read calibration fuse 2014-08-26 10:48:27 -04:00
ahci_xgene.c Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2014-10-10 07:23:11 -04:00
ahci.c ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks 2014-10-27 12:02:11 -04:00
ahci.h AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode 2014-10-06 11:43:36 -04:00
ata_generic.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
ata_piix.c ata_piix: Add Device IDs for Intel 9 Series PCH 2014-08-28 08:53:40 -04:00
Kconfig ata: Remove ARCH_KIRKWOOD dependency 2014-09-09 14:38:32 +00:00
libahci_platform.c AHCI: Move host activation code into ahci_host_activate() 2014-10-06 11:43:35 -04:00
libahci.c Revert "AHCI: Optimize single IRQ interrupt processing" 2014-10-27 12:02:05 -04:00
libata-acpi.c ACPI and power management updates for 3.15-rc1 2014-04-01 12:48:54 -07:00
libata-core.c Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2014-10-10 07:23:11 -04:00
libata-eh.c libata: EH should handle AMNF error condition as a media error 2014-07-15 11:13:57 -04:00
libata-pmp.c ata: enable quirk from jmicron JMB350 for JMB394 2014-01-31 07:05:44 -05:00
libata-scsi.c scsi: use 64-bit LUNs 2014-07-17 22:07:37 +02:00
libata-sff.c libata-sff: Fix controllers with no ctl port 2014-09-28 11:19:12 -04:00
libata-transport.c libata: Fix display of sata speed 2013-10-27 07:43:25 -04:00
libata-transport.h [libata] Add ATA transport class 2010-10-21 20:21:03 -04:00
libata-zpodd.c libata: zpodd: eliminate odd_can_poweroff 2014-03-14 11:23:47 -04:00
libata.h scsi: use 64-bit LUNs 2014-07-17 22:07:37 +02:00
Makefile ata: Add support for the Tegra124 SATA controller 2014-07-18 17:52:33 -04:00
pata_acpi.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ali.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_amd.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_arasan_cf.c pata_arasan_cf: use dmaengine_terminate_all() API 2014-10-15 21:30:59 +05:30
pata_artop.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_at32.c ata: use dev_get_platdata() 2013-07-30 08:59:24 -04:00
pata_at91.c pata_at91: fix ata_host_activate() failure handling 2014-04-02 13:17:31 -04:00
pata_atiixp.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_atp867x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_bf54x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd64x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd640.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5520.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5530.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5535.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5536.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cypress.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_efar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ep93xx.c drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq() 2014-07-17 08:36:13 -04:00
pata_hpt3x2n.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt3x3.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_hpt37x.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt366.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_icside.c Drivers: ata: remove __dev* attributes. 2013-01-03 15:57:03 -08:00
pata_imx.c ata: pata_imx: Use the SIMPLE_DEV_PM_OPS() macro 2014-10-04 22:06:57 -04:00
pata_isapnp.c pata_isapnp: Don't use invalid I/O ports 2013-10-07 15:17:32 -04:00
pata_it821x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_it8213.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c DMA-API: others: use dma_set_coherent_mask() 2013-10-31 14:49:07 +00:00
pata_jmicron.c ata: Disabling the async PM for JMicron chip 363/361 2014-09-01 08:38:06 -04:00
pata_legacy.c pata_legacy: Remove dead code 2014-03-11 08:30:53 -04:00
pata_macio.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_marvell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_mpc52xx.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_mpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_netcell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ninja32.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87410.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87415.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_octeon_cf.c pata_octeon_cf: use devm_kzalloc() to allocate cf_port 2014-04-14 13:33:28 -04:00
pata_of_platform.c pata_platform: Remove useless irq_flags field 2014-08-23 13:05:08 -04:00
pata_oldpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_opti.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_optidma.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_palmld.c Drivers: ata: remove __dev* attributes. 2013-01-03 15:57:03 -08:00
pata_pcmcia.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_pdc2027x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_piccolo.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_platform.c pata_platform: Remove useless irq_flags field 2014-08-23 13:05:08 -04:00
pata_pxa.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_radisys.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rb532_cf.c Drivers: ata: remove __dev* attributes. 2013-01-03 15:57:03 -08:00
pata_rdc.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rz1000.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_samsung_cf.c pata_samsung_cf: change ret type to signed 2014-08-17 07:24:48 -04:00
pata_sc1200.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_scc.c pata_scc: propagate return value of scc_wait_after_reset 2014-08-18 09:15:21 -04:00
pata_sch.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_serverworks.c pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller 2014-10-07 17:10:14 -04:00
pata_sil680.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sl82c105.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_triflex.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pdc_adma.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c ata: remove superfluous casts 2014-03-26 12:36:53 -04:00
sata_fsl.c ata: Use dma_zalloc_coherent 2014-06-17 10:23:26 -04:00
sata_highbank.c AHCI: Move host activation code into ahci_host_activate() 2014-10-06 11:43:35 -04:00
sata_inic162x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_mv.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_nv.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_promise.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_promise.h
sata_qstor.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_rcar.c ata: sata_rcar: Disable DIPM mode for r8a7790 ES1 2014-10-27 09:03:19 -04:00
sata_sil24.c sata_sil24: Identify which card suffered IRQ status error 2014-07-22 10:08:31 -04:00
sata_sil.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_svw.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_sx4.c ata: remove superfluous casts 2014-03-26 12:36:53 -04:00
sata_uli.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_vsc.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sis.h