352d318cc9
The device tree specification recommends that generic name should be used for nodes. So instead of naming those fixed regulator nodes arbitrarily, let's use the generic name 'regulator@num' for those nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
145 lines
3.2 KiB
Plaintext
145 lines
3.2 KiB
Plaintext
/*
|
|
* Copyright 2013 Crystalfontz America, Inc.
|
|
* Copyright 2013 Free Electrons
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/*
|
|
* The CFA-10058 is an expansion board for the CFA-10036 module, thus we
|
|
* need to include the CFA-10036 DTS.
|
|
*/
|
|
#include "imx28-cfa10036.dts"
|
|
|
|
/ {
|
|
model = "Crystalfontz CFA-10058 Board";
|
|
compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
|
|
|
|
apb@80000000 {
|
|
apbh@80000000 {
|
|
pinctrl@80018000 {
|
|
usb_pins_cfa10058: usb-10058@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
MX28_PAD_GPMI_D07__GPIO_0_7
|
|
>;
|
|
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
|
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
|
fsl,pull-up = <MXS_PULL_DISABLE>;
|
|
};
|
|
|
|
lcdif_pins_cfa10058: lcdif-10058@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
|
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
|
MX28_PAD_LCD_RS__LCD_DOTCLK
|
|
MX28_PAD_LCD_CS__LCD_ENABLE
|
|
>;
|
|
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
|
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
|
fsl,pull-up = <MXS_PULL_DISABLE>;
|
|
};
|
|
};
|
|
|
|
lcdif@80030000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcdif_24bit_pins_a
|
|
&lcdif_pins_cfa10058>;
|
|
display = <&display>;
|
|
status = "okay";
|
|
|
|
display: display {
|
|
bits-per-pixel = <32>;
|
|
bus-width = <24>;
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing0 {
|
|
clock-frequency = <30000000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hback-porch = <40>;
|
|
hfront-porch = <40>;
|
|
vback-porch = <13>;
|
|
vfront-porch = <29>;
|
|
hsync-len = <8>;
|
|
vsync-len = <8>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
apbx@80040000 {
|
|
lradc@80050000 {
|
|
fsl,lradc-touchscreen-wires = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
pwm: pwm@80064000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm3_pins_b>;
|
|
status = "okay";
|
|
};
|
|
|
|
usbphy1: usbphy@8007e000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
ahb@80080000 {
|
|
usb1: usb@80090000 {
|
|
vbus-supply = <®_usb1_vbus>;
|
|
pinctrl-0 = <&usbphy1_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_usb1_vbus: regulator@0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_pins_cfa10058>;
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "usb1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio0 7 1>;
|
|
};
|
|
};
|
|
|
|
ahb@80080000 {
|
|
mac0: ethernet@800f0000 {
|
|
phy-mode = "rmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mac0_pins_a>;
|
|
phy-reset-gpios = <&gpio2 21 0>;
|
|
phy-reset-duration = <100>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 3 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
};
|
|
};
|