forked from Minki/linux
75b6c4b68f
This adds the ability to set "clock-frequency" in the device tree for the at91 i2cbus following the naming of other i2c bus implementations. If the property is not set,the clock frequency will default to the previously used define of 100KHz. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
35 lines
887 B
Plaintext
35 lines
887 B
Plaintext
I2C for Atmel platforms
|
|
|
|
Required properties :
|
|
- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
|
|
"atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c"
|
|
or "atmel,at91sam9x5-i2c"
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
- interrupts: interrupt number to the cpu.
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- clocks: phandles to input clocks.
|
|
|
|
Optional properties:
|
|
- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
|
|
- Child nodes conforming to i2c bus binding
|
|
|
|
Examples :
|
|
|
|
i2c0: i2c@fff84000 {
|
|
compatible = "atmel,at91sam9g20-i2c";
|
|
reg = <0xfff84000 0x100>;
|
|
interrupts = <12 4 6>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&twi0_clk>;
|
|
clock-frequency = <400000>;
|
|
|
|
24c512@50 {
|
|
compatible = "24c512";
|
|
reg = <0x50>;
|
|
pagesize = <128>;
|
|
}
|
|
}
|