forked from Minki/linux
0767bbe530
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
861 lines
24 KiB
C
861 lines
24 KiB
C
/*
|
|
* sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs
|
|
*
|
|
* Copyright (C) 2013 Peter Chen
|
|
* Copyright (C) 2015 Gerhard Bertelsmann
|
|
* All rights reserved.
|
|
*
|
|
* Parts of this software are based on (derived from) the SJA1000 code by:
|
|
* Copyright (C) 2014 Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
|
|
* Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
|
|
* Copyright (C) 2002-2007 Volkswagen Group Electronic Research
|
|
* Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
|
|
* 38106 Braunschweig, GERMANY
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of Volkswagen nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* Alternatively, provided that this notice is retained in full, this
|
|
* software may be distributed under the terms of the GNU General
|
|
* Public License ("GPL") version 2, in which case the provisions of the
|
|
* GPL apply INSTEAD OF those given above.
|
|
*
|
|
* The provided data structures and external interfaces from this code
|
|
* are not restricted to be used by modules with a GPL compatible license.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
|
|
* DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
#include <linux/can/led.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define DRV_NAME "sun4i_can"
|
|
|
|
/* Registers address (physical base address 0x01C2BC00) */
|
|
#define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */
|
|
#define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */
|
|
#define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */
|
|
#define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */
|
|
#define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */
|
|
#define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */
|
|
#define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */
|
|
#define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */
|
|
#define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */
|
|
#define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */
|
|
#define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */
|
|
#define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */
|
|
#define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */
|
|
#define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */
|
|
#define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */
|
|
#define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */
|
|
#define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */
|
|
#define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */
|
|
#define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */
|
|
#define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */
|
|
#define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */
|
|
#define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */
|
|
#define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
|
|
#define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
|
|
#define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
|
|
#define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
|
|
#define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
|
|
|
|
/* Controller Register Description */
|
|
|
|
/* mode select register (r/w)
|
|
* offset:0x0000 default:0x0000_0001
|
|
*/
|
|
#define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */
|
|
#define SUN4I_MSEL_WAKE_UP (0x00 << 4)
|
|
#define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */
|
|
#define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3)
|
|
#define SUN4I_MSEL_LOOPBACK_MODE BIT(2)
|
|
#define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1)
|
|
#define SUN4I_MSEL_RESET_MODE BIT(0)
|
|
|
|
/* command register (w)
|
|
* offset:0x0004 default:0x0000_0000
|
|
*/
|
|
#define SUN4I_CMD_BUS_OFF_REQ BIT(5)
|
|
#define SUN4I_CMD_SELF_RCV_REQ BIT(4)
|
|
#define SUN4I_CMD_CLEAR_OR_FLAG BIT(3)
|
|
#define SUN4I_CMD_RELEASE_RBUF BIT(2)
|
|
#define SUN4I_CMD_ABORT_REQ BIT(1)
|
|
#define SUN4I_CMD_TRANS_REQ BIT(0)
|
|
|
|
/* status register (r)
|
|
* offset:0x0008 default:0x0000_003c
|
|
*/
|
|
#define SUN4I_STA_BIT_ERR (0x00 << 22)
|
|
#define SUN4I_STA_FORM_ERR (0x01 << 22)
|
|
#define SUN4I_STA_STUFF_ERR (0x02 << 22)
|
|
#define SUN4I_STA_OTHER_ERR (0x03 << 22)
|
|
#define SUN4I_STA_MASK_ERR (0x03 << 22)
|
|
#define SUN4I_STA_ERR_DIR BIT(21)
|
|
#define SUN4I_STA_ERR_SEG_CODE (0x1f << 16)
|
|
#define SUN4I_STA_START (0x03 << 16)
|
|
#define SUN4I_STA_ID28_21 (0x02 << 16)
|
|
#define SUN4I_STA_ID20_18 (0x06 << 16)
|
|
#define SUN4I_STA_SRTR (0x04 << 16)
|
|
#define SUN4I_STA_IDE (0x05 << 16)
|
|
#define SUN4I_STA_ID17_13 (0x07 << 16)
|
|
#define SUN4I_STA_ID12_5 (0x0f << 16)
|
|
#define SUN4I_STA_ID4_0 (0x0e << 16)
|
|
#define SUN4I_STA_RTR (0x0c << 16)
|
|
#define SUN4I_STA_RB1 (0x0d << 16)
|
|
#define SUN4I_STA_RB0 (0x09 << 16)
|
|
#define SUN4I_STA_DLEN (0x0b << 16)
|
|
#define SUN4I_STA_DATA_FIELD (0x0a << 16)
|
|
#define SUN4I_STA_CRC_SEQUENCE (0x08 << 16)
|
|
#define SUN4I_STA_CRC_DELIMITER (0x18 << 16)
|
|
#define SUN4I_STA_ACK (0x19 << 16)
|
|
#define SUN4I_STA_ACK_DELIMITER (0x1b << 16)
|
|
#define SUN4I_STA_END (0x1a << 16)
|
|
#define SUN4I_STA_INTERMISSION (0x12 << 16)
|
|
#define SUN4I_STA_ACTIVE_ERROR (0x11 << 16)
|
|
#define SUN4I_STA_PASSIVE_ERROR (0x16 << 16)
|
|
#define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16)
|
|
#define SUN4I_STA_ERROR_DELIMITER (0x17 << 16)
|
|
#define SUN4I_STA_OVERLOAD (0x1c << 16)
|
|
#define SUN4I_STA_BUS_OFF BIT(7)
|
|
#define SUN4I_STA_ERR_STA BIT(6)
|
|
#define SUN4I_STA_TRANS_BUSY BIT(5)
|
|
#define SUN4I_STA_RCV_BUSY BIT(4)
|
|
#define SUN4I_STA_TRANS_OVER BIT(3)
|
|
#define SUN4I_STA_TBUF_RDY BIT(2)
|
|
#define SUN4I_STA_DATA_ORUN BIT(1)
|
|
#define SUN4I_STA_RBUF_RDY BIT(0)
|
|
|
|
/* interrupt register (r)
|
|
* offset:0x000c default:0x0000_0000
|
|
*/
|
|
#define SUN4I_INT_BUS_ERR BIT(7)
|
|
#define SUN4I_INT_ARB_LOST BIT(6)
|
|
#define SUN4I_INT_ERR_PASSIVE BIT(5)
|
|
#define SUN4I_INT_WAKEUP BIT(4)
|
|
#define SUN4I_INT_DATA_OR BIT(3)
|
|
#define SUN4I_INT_ERR_WRN BIT(2)
|
|
#define SUN4I_INT_TBUF_VLD BIT(1)
|
|
#define SUN4I_INT_RBUF_VLD BIT(0)
|
|
|
|
/* interrupt enable register (r/w)
|
|
* offset:0x0010 default:0x0000_0000
|
|
*/
|
|
#define SUN4I_INTEN_BERR BIT(7)
|
|
#define SUN4I_INTEN_ARB_LOST BIT(6)
|
|
#define SUN4I_INTEN_ERR_PASSIVE BIT(5)
|
|
#define SUN4I_INTEN_WAKEUP BIT(4)
|
|
#define SUN4I_INTEN_OR BIT(3)
|
|
#define SUN4I_INTEN_ERR_WRN BIT(2)
|
|
#define SUN4I_INTEN_TX BIT(1)
|
|
#define SUN4I_INTEN_RX BIT(0)
|
|
|
|
/* error code */
|
|
#define SUN4I_ERR_INRCV (0x1 << 5)
|
|
#define SUN4I_ERR_INTRANS (0x0 << 5)
|
|
|
|
/* filter mode */
|
|
#define SUN4I_FILTER_CLOSE 0
|
|
#define SUN4I_SINGLE_FLTER_MODE 1
|
|
#define SUN4I_DUAL_FILTER_MODE 2
|
|
|
|
/* message buffer flags */
|
|
#define SUN4I_MSG_EFF_FLAG BIT(7)
|
|
#define SUN4I_MSG_RTR_FLAG BIT(6)
|
|
|
|
/* max. number of interrupts handled in ISR */
|
|
#define SUN4I_CAN_MAX_IRQ 20
|
|
#define SUN4I_MODE_MAX_RETRIES 100
|
|
|
|
struct sun4ican_priv {
|
|
struct can_priv can;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */
|
|
};
|
|
|
|
static const struct can_bittiming_const sun4ican_bittiming_const = {
|
|
.name = DRV_NAME,
|
|
.tseg1_min = 1,
|
|
.tseg1_max = 16,
|
|
.tseg2_min = 1,
|
|
.tseg2_max = 8,
|
|
.sjw_max = 4,
|
|
.brp_min = 1,
|
|
.brp_max = 64,
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->cmdreg_lock, flags);
|
|
writel(val, priv->base + SUN4I_REG_CMD_ADDR);
|
|
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
|
|
}
|
|
|
|
static int set_normal_mode(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
int retry = SUN4I_MODE_MAX_RETRIES;
|
|
u32 mod_reg_val = 0;
|
|
|
|
do {
|
|
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
|
|
mod_reg_val &= ~SUN4I_MSEL_RESET_MODE;
|
|
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
|
|
} while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE));
|
|
|
|
if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) {
|
|
netdev_err(dev,
|
|
"setting controller into normal mode failed!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_reset_mode(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
int retry = SUN4I_MODE_MAX_RETRIES;
|
|
u32 mod_reg_val = 0;
|
|
|
|
do {
|
|
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
|
|
mod_reg_val |= SUN4I_MSEL_RESET_MODE;
|
|
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
|
|
} while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE));
|
|
|
|
if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) &
|
|
SUN4I_MSEL_RESET_MODE)) {
|
|
netdev_err(dev, "setting controller into reset mode failed!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* bittiming is called in reset_mode only */
|
|
static int sun4ican_set_bittiming(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
struct can_bittiming *bt = &priv->can.bittiming;
|
|
u32 cfg;
|
|
|
|
cfg = ((bt->brp - 1) & 0x3FF) |
|
|
(((bt->sjw - 1) & 0x3) << 14) |
|
|
(((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) |
|
|
(((bt->phase_seg2 - 1) & 0x7) << 20);
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
|
|
cfg |= 0x800000;
|
|
|
|
netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg);
|
|
writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4ican_get_berr_counter(const struct net_device *dev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
u32 errors;
|
|
int err;
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err) {
|
|
netdev_err(dev, "could not enable clock\n");
|
|
return err;
|
|
}
|
|
|
|
errors = readl(priv->base + SUN4I_REG_ERRC_ADDR);
|
|
|
|
bec->txerr = errors & 0xFF;
|
|
bec->rxerr = (errors >> 16) & 0xFF;
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_can_start(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
u32 mod_reg_val;
|
|
|
|
/* we need to enter the reset mode */
|
|
err = set_reset_mode(dev);
|
|
if (err) {
|
|
netdev_err(dev, "could not enter reset mode\n");
|
|
return err;
|
|
}
|
|
|
|
/* set filters - we accept all */
|
|
writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR);
|
|
writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR);
|
|
|
|
/* clear error counters and error code capture */
|
|
writel(0, priv->base + SUN4I_REG_ERRC_ADDR);
|
|
|
|
/* enable interrupts */
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
|
|
writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR);
|
|
else
|
|
writel(0xFF & ~SUN4I_INTEN_BERR,
|
|
priv->base + SUN4I_REG_INTEN_ADDR);
|
|
|
|
/* enter the selected mode */
|
|
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
|
mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE;
|
|
else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE;
|
|
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
|
|
|
|
err = sun4ican_set_bittiming(dev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* we are ready to enter the normal mode */
|
|
err = set_normal_mode(dev);
|
|
if (err) {
|
|
netdev_err(dev, "could not enter normal mode\n");
|
|
return err;
|
|
}
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_can_stop(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
/* we need to enter reset mode */
|
|
err = set_reset_mode(dev);
|
|
if (err) {
|
|
netdev_err(dev, "could not enter reset mode\n");
|
|
return err;
|
|
}
|
|
|
|
/* disable all interrupts */
|
|
writel(0, priv->base + SUN4I_REG_INTEN_ADDR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode)
|
|
{
|
|
int err;
|
|
|
|
switch (mode) {
|
|
case CAN_MODE_START:
|
|
err = sun4i_can_start(dev);
|
|
if (err) {
|
|
netdev_err(dev, "starting CAN controller failed!\n");
|
|
return err;
|
|
}
|
|
if (netif_queue_stopped(dev))
|
|
netif_wake_queue(dev);
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* transmit a CAN message
|
|
* message layout in the sk_buff should be like this:
|
|
* xx xx xx xx ff ll 00 11 22 33 44 55 66 77
|
|
* [ can_id ] [flags] [len] [can data (up to 8 bytes]
|
|
*/
|
|
static netdev_tx_t sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
u8 dlc;
|
|
u32 dreg, msg_flag_n;
|
|
canid_t id;
|
|
int i;
|
|
|
|
if (can_dropped_invalid_skb(dev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
id = cf->can_id;
|
|
dlc = cf->can_dlc;
|
|
msg_flag_n = dlc;
|
|
|
|
if (id & CAN_RTR_FLAG)
|
|
msg_flag_n |= SUN4I_MSG_RTR_FLAG;
|
|
|
|
if (id & CAN_EFF_FLAG) {
|
|
msg_flag_n |= SUN4I_MSG_EFF_FLAG;
|
|
dreg = SUN4I_REG_BUF5_ADDR;
|
|
writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
|
|
writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR);
|
|
writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR);
|
|
writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR);
|
|
} else {
|
|
dreg = SUN4I_REG_BUF3_ADDR;
|
|
writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
|
|
writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR);
|
|
}
|
|
|
|
for (i = 0; i < dlc; i++)
|
|
writel(cf->data[i], priv->base + (dreg + i * 4));
|
|
|
|
writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR);
|
|
|
|
can_put_echo_skb(skb, dev, 0);
|
|
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
|
sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ);
|
|
else
|
|
sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void sun4i_can_rx(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
u8 fi;
|
|
u32 dreg;
|
|
canid_t id;
|
|
int i;
|
|
|
|
/* create zero'ed CAN frame buffer */
|
|
skb = alloc_can_skb(dev, &cf);
|
|
if (!skb)
|
|
return;
|
|
|
|
fi = readl(priv->base + SUN4I_REG_BUF0_ADDR);
|
|
cf->can_dlc = get_can_dlc(fi & 0x0F);
|
|
if (fi & SUN4I_MSG_EFF_FLAG) {
|
|
dreg = SUN4I_REG_BUF5_ADDR;
|
|
id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) |
|
|
(readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) |
|
|
(readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) |
|
|
((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f);
|
|
id |= CAN_EFF_FLAG;
|
|
} else {
|
|
dreg = SUN4I_REG_BUF3_ADDR;
|
|
id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) |
|
|
((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7);
|
|
}
|
|
|
|
/* remote frame ? */
|
|
if (fi & SUN4I_MSG_RTR_FLAG)
|
|
id |= CAN_RTR_FLAG;
|
|
else
|
|
for (i = 0; i < cf->can_dlc; i++)
|
|
cf->data[i] = readl(priv->base + dreg + i * 4);
|
|
|
|
cf->can_id = id;
|
|
|
|
sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
netif_rx(skb);
|
|
|
|
can_led_event(dev, CAN_LED_EVENT_RX);
|
|
}
|
|
|
|
static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
enum can_state state = priv->can.state;
|
|
enum can_state rx_state, tx_state;
|
|
unsigned int rxerr, txerr, errc;
|
|
u32 ecc, alc;
|
|
|
|
/* we don't skip if alloc fails because we want the stats anyhow */
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
|
|
errc = readl(priv->base + SUN4I_REG_ERRC_ADDR);
|
|
rxerr = (errc >> 16) & 0xFF;
|
|
txerr = errc & 0xFF;
|
|
|
|
if (skb) {
|
|
cf->data[6] = txerr;
|
|
cf->data[7] = rxerr;
|
|
}
|
|
|
|
if (isrc & SUN4I_INT_DATA_OR) {
|
|
/* data overrun interrupt */
|
|
netdev_dbg(dev, "data overrun interrupt\n");
|
|
if (likely(skb)) {
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
|
|
}
|
|
stats->rx_over_errors++;
|
|
stats->rx_errors++;
|
|
|
|
/* reset the CAN IP by entering reset mode
|
|
* ignoring timeout error
|
|
*/
|
|
set_reset_mode(dev);
|
|
set_normal_mode(dev);
|
|
|
|
/* clear bit */
|
|
sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG);
|
|
}
|
|
if (isrc & SUN4I_INT_ERR_WRN) {
|
|
/* error warning interrupt */
|
|
netdev_dbg(dev, "error warning interrupt\n");
|
|
|
|
if (status & SUN4I_STA_BUS_OFF)
|
|
state = CAN_STATE_BUS_OFF;
|
|
else if (status & SUN4I_STA_ERR_STA)
|
|
state = CAN_STATE_ERROR_WARNING;
|
|
else
|
|
state = CAN_STATE_ERROR_ACTIVE;
|
|
}
|
|
if (isrc & SUN4I_INT_BUS_ERR) {
|
|
/* bus error interrupt */
|
|
netdev_dbg(dev, "bus error interrupt\n");
|
|
priv->can.can_stats.bus_error++;
|
|
stats->rx_errors++;
|
|
|
|
if (likely(skb)) {
|
|
ecc = readl(priv->base + SUN4I_REG_STA_ADDR);
|
|
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
|
|
switch (ecc & SUN4I_STA_MASK_ERR) {
|
|
case SUN4I_STA_BIT_ERR:
|
|
cf->data[2] |= CAN_ERR_PROT_BIT;
|
|
break;
|
|
case SUN4I_STA_FORM_ERR:
|
|
cf->data[2] |= CAN_ERR_PROT_FORM;
|
|
break;
|
|
case SUN4I_STA_STUFF_ERR:
|
|
cf->data[2] |= CAN_ERR_PROT_STUFF;
|
|
break;
|
|
default:
|
|
cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE)
|
|
>> 16;
|
|
break;
|
|
}
|
|
/* error occurred during transmission? */
|
|
if ((ecc & SUN4I_STA_ERR_DIR) == 0)
|
|
cf->data[2] |= CAN_ERR_PROT_TX;
|
|
}
|
|
}
|
|
if (isrc & SUN4I_INT_ERR_PASSIVE) {
|
|
/* error passive interrupt */
|
|
netdev_dbg(dev, "error passive interrupt\n");
|
|
if (state == CAN_STATE_ERROR_PASSIVE)
|
|
state = CAN_STATE_ERROR_WARNING;
|
|
else
|
|
state = CAN_STATE_ERROR_PASSIVE;
|
|
}
|
|
if (isrc & SUN4I_INT_ARB_LOST) {
|
|
/* arbitration lost interrupt */
|
|
netdev_dbg(dev, "arbitration lost interrupt\n");
|
|
alc = readl(priv->base + SUN4I_REG_STA_ADDR);
|
|
priv->can.can_stats.arbitration_lost++;
|
|
stats->tx_errors++;
|
|
if (likely(skb)) {
|
|
cf->can_id |= CAN_ERR_LOSTARB;
|
|
cf->data[0] = (alc >> 8) & 0x1f;
|
|
}
|
|
}
|
|
|
|
if (state != priv->can.state) {
|
|
tx_state = txerr >= rxerr ? state : 0;
|
|
rx_state = txerr <= rxerr ? state : 0;
|
|
|
|
if (likely(skb))
|
|
can_change_state(dev, cf, tx_state, rx_state);
|
|
else
|
|
priv->can.state = state;
|
|
if (state == CAN_STATE_BUS_OFF)
|
|
can_bus_off(dev);
|
|
}
|
|
|
|
if (likely(skb)) {
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
netif_rx(skb);
|
|
} else {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
u8 isrc, status;
|
|
int n = 0;
|
|
|
|
while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) &&
|
|
(n < SUN4I_CAN_MAX_IRQ)) {
|
|
n++;
|
|
status = readl(priv->base + SUN4I_REG_STA_ADDR);
|
|
|
|
if (isrc & SUN4I_INT_WAKEUP)
|
|
netdev_warn(dev, "wakeup interrupt\n");
|
|
|
|
if (isrc & SUN4I_INT_TBUF_VLD) {
|
|
/* transmission complete interrupt */
|
|
stats->tx_bytes +=
|
|
readl(priv->base +
|
|
SUN4I_REG_RBUF_RBACK_START_ADDR) & 0xf;
|
|
stats->tx_packets++;
|
|
can_get_echo_skb(dev, 0);
|
|
netif_wake_queue(dev);
|
|
can_led_event(dev, CAN_LED_EVENT_TX);
|
|
}
|
|
if ((isrc & SUN4I_INT_RBUF_VLD) &&
|
|
!(isrc & SUN4I_INT_DATA_OR)) {
|
|
/* receive interrupt - don't read if overrun occurred */
|
|
while (status & SUN4I_STA_RBUF_RDY) {
|
|
/* RX buffer is not empty */
|
|
sun4i_can_rx(dev);
|
|
status = readl(priv->base + SUN4I_REG_STA_ADDR);
|
|
}
|
|
}
|
|
if (isrc &
|
|
(SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR |
|
|
SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) {
|
|
/* error interrupt */
|
|
if (sun4i_can_err(dev, isrc, status))
|
|
netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n");
|
|
}
|
|
/* clear interrupts */
|
|
writel(isrc, priv->base + SUN4I_REG_INT_ADDR);
|
|
readl(priv->base + SUN4I_REG_INT_ADDR);
|
|
}
|
|
if (n >= SUN4I_CAN_MAX_IRQ)
|
|
netdev_dbg(dev, "%d messages handled in ISR", n);
|
|
|
|
return (n) ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static int sun4ican_open(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
/* common open */
|
|
err = open_candev(dev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* register interrupt handler */
|
|
err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev);
|
|
if (err) {
|
|
netdev_err(dev, "request_irq err: %d\n", err);
|
|
goto exit_irq;
|
|
}
|
|
|
|
/* turn on clocking for CAN peripheral block */
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err) {
|
|
netdev_err(dev, "could not enable CAN peripheral clock\n");
|
|
goto exit_clock;
|
|
}
|
|
|
|
err = sun4i_can_start(dev);
|
|
if (err) {
|
|
netdev_err(dev, "could not start CAN peripheral\n");
|
|
goto exit_can_start;
|
|
}
|
|
|
|
can_led_event(dev, CAN_LED_EVENT_OPEN);
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
|
|
exit_can_start:
|
|
clk_disable_unprepare(priv->clk);
|
|
exit_clock:
|
|
free_irq(dev->irq, dev);
|
|
exit_irq:
|
|
close_candev(dev);
|
|
return err;
|
|
}
|
|
|
|
static int sun4ican_close(struct net_device *dev)
|
|
{
|
|
struct sun4ican_priv *priv = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
sun4i_can_stop(dev);
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
free_irq(dev->irq, dev);
|
|
close_candev(dev);
|
|
can_led_event(dev, CAN_LED_EVENT_STOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops sun4ican_netdev_ops = {
|
|
.ndo_open = sun4ican_open,
|
|
.ndo_stop = sun4ican_close,
|
|
.ndo_start_xmit = sun4ican_start_xmit,
|
|
};
|
|
|
|
static const struct of_device_id sun4ican_of_match[] = {
|
|
{.compatible = "allwinner,sun4i-a10-can"},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, sun4ican_of_match);
|
|
|
|
static int sun4ican_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
|
|
unregister_netdev(dev);
|
|
free_candev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4ican_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct clk *clk;
|
|
void __iomem *addr;
|
|
int err, irq;
|
|
struct net_device *dev;
|
|
struct sun4ican_priv *priv;
|
|
|
|
clk = of_clk_get(np, 0);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "unable to request clock\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
addr = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(addr)) {
|
|
err = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
dev = alloc_candev(sizeof(struct sun4ican_priv), 1);
|
|
if (!dev) {
|
|
dev_err(&pdev->dev,
|
|
"could not allocate memory for CAN device\n");
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
dev->netdev_ops = &sun4ican_netdev_ops;
|
|
dev->irq = irq;
|
|
dev->flags |= IFF_ECHO;
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->can.clock.freq = clk_get_rate(clk);
|
|
priv->can.bittiming_const = &sun4ican_bittiming_const;
|
|
priv->can.do_set_mode = sun4ican_set_mode;
|
|
priv->can.do_get_berr_counter = sun4ican_get_berr_counter;
|
|
priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
|
|
CAN_CTRLMODE_LISTENONLY |
|
|
CAN_CTRLMODE_LOOPBACK |
|
|
CAN_CTRLMODE_3_SAMPLES;
|
|
priv->base = addr;
|
|
priv->clk = clk;
|
|
spin_lock_init(&priv->cmdreg_lock);
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
err = register_candev(dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
|
|
DRV_NAME, err);
|
|
goto exit_free;
|
|
}
|
|
devm_can_led_init(dev);
|
|
|
|
dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n",
|
|
priv->base, dev->irq);
|
|
|
|
return 0;
|
|
|
|
exit_free:
|
|
free_candev(dev);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static struct platform_driver sun4i_can_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = sun4ican_of_match,
|
|
},
|
|
.probe = sun4ican_probe,
|
|
.remove = sun4ican_remove,
|
|
};
|
|
|
|
module_platform_driver(sun4i_can_driver);
|
|
|
|
MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
|
|
MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");
|